Re: [linux-sunxi] [PATCH 13/14] ARM: dts: sun8i: Add gpio-regulator used on Orange Pi One

Hi Julian, thank you for the review. You're right. I added the pinctrl client nodes. Also the patches were split incorrectly, so I fixed that too. regards, Ondrej On 24.6.2016 04:51, Julian Calaby wrote: > Hi Ondrej, > > On Fri, Jun 24, 2016 at 5:21 AM, wrote: >> From:

Re: [linux-sunxi] [PATCH 13/14] ARM: dts: sun8i: Add gpio-regulator used on Orange Pi One

Hi Julian, thank you for the review. You're right. I added the pinctrl client nodes. Also the patches were split incorrectly, so I fixed that too. regards, Ondrej On 24.6.2016 04:51, Julian Calaby wrote: > Hi Ondrej, > > On Fri, Jun 24, 2016 at 5:21 AM, wrote: >> From: Ondrej Jirman >> >>

Re: [linux-sunxi] [PATCH 13/14] ARM: dts: sun8i: Add gpio-regulator used on Orange Pi One

Hi Ondrej, On Fri, Jun 24, 2016 at 5:21 AM, wrote: > From: Ondrej Jirman > > Xulong Orange Pi One uses GPIO based regulator that > switches between two voltages: 1.1V and 1.3V. The > regulator is controlled from the PL6 pin. > > Signed-off-by: Ondrej

Re: [linux-sunxi] [PATCH 13/14] ARM: dts: sun8i: Add gpio-regulator used on Orange Pi One

Hi Ondrej, On Fri, Jun 24, 2016 at 5:21 AM, wrote: > From: Ondrej Jirman > > Xulong Orange Pi One uses GPIO based regulator that > switches between two voltages: 1.1V and 1.3V. The > regulator is controlled from the PL6 pin. > > Signed-off-by: Ondrej Jirman > --- >

Re: [linux-sunxi] [PATCH 13/14] ARM: dts: sun8i: Add gpio-regulator used on Orange Pi One

Hi Ondrej, On Fri, Jun 24, 2016 at 5:21 AM, wrote: > From: Ondrej Jirman > > Xulong Orange Pi One uses GPIO based regulator that > switches between two voltages: 1.1V and 1.3V. The > regulator is controlled from the PL6 pin. > > Signed-off-by: Ondrej

Re: [linux-sunxi] [PATCH 13/14] ARM: dts: sun8i: Add gpio-regulator used on Orange Pi One

Hi Ondrej, On Fri, Jun 24, 2016 at 5:21 AM, wrote: > From: Ondrej Jirman > > Xulong Orange Pi One uses GPIO based regulator that > switches between two voltages: 1.1V and 1.3V. The > regulator is controlled from the PL6 pin. > > Signed-off-by: Ondrej Jirman > --- >