> Hello Paul & Phil , Ouch !, is this media that loose on the
> substrate that it leaves that much behind ? Or is it something
> else ? I'd really like to know what the problem is , as I am
> seriously looking at putting DDS-III & IV 's into my backup
> schemes
Hello Paul & Phil , Ouch !, is this media that loose on the
substrate that it leaves that much behind ? Or is it something
else ? I'd really like to know what the problem is , as I am
seriously looking at putting DDS-III & IV 's into my backup
schemes
> uhmmm ok. I've now done multiple cleanning runs with multiple
> cleaning tapes. let's see what happens when i try the amflush.
>
> and guess what... it's worked for me too. doh! guess once a week is
> not enough then.
>
> apologies to the list my tape cluelessness.
No problem - it's a rel
On Sun, 26 Nov 2000, Phil Randal wrote:
> Ah, have you tried cleaning the tape heads?
>
the drive gets a run of a cleaning tape on a weekly basis.
> far more frequently than you'd expect. I've found it needs
> two cleaning tape passes to clear this one.
>
uhmmm ok. I've now done multiple
Date sent: Sun, 26 Nov 2000 15:33:00 + (GMT)
From: Paul Jakma <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Subject: problem with hp C1537A tape drives
> I have a problem with the aforementioned DDS-3 tape dr
Hello Paul , Is the tape drive the only drive on that controller ?
- If it is the only drive then , I have just one suggestion
-verify- all cables are seated correctly & -verify- that there
is proper termination on the bus .
- If it is Not the only drive the
Ooops.. yes.. that info might have been useful. :)
The box is a Compaq PL3000. Chipset is the onboard Sym 53c876, driven
by the ncr53c8xx driver. Drive is external.
Kernel is RH6.2 default 2.2.14-5.0smp.
On Sun, 26 Nov 2000, Mr. James W. Laferriere wrote:
>
> Hello Paul , Could you add
Hello Paul , Could you add a little more info like which scsi
chipset you are using & what the driver version is & what kernel
version you are running also (One more )& how you have the drive
chained to the scsi-bus . Someplace there is a pointer on howto
I have a problem with the aforementioned DDS-3 tape drives. I'm using
one with amanda for backups. But every now and then the nightly backup
fails with "I/O error" and i see the following in the system logs:
st0: Error with sense data: [valid=0] Info fld=0x0, Current st09:00:
sense key Aborted Co
9 matches
Mail list logo
