. two drives with
LUN 0 and one with LUN 1. While the controller itself sees all the 3 drives
when booting up, under Linux I am only able to see the LUN 0 drives.
Kernel is stock 2.4.6 using the qlogicfc driver. I also tried to set
max_scsi_luns=32, even though the default of 8 should be enough. No
Dmitry Meshchaninov wrote:
>
> Hi!
> Judging from recent messages on linux-kernel and from the code which is
> currently in 2.4.x the qlogicfc driver needs to be updated a bit. I have
> done some amount of work on this driver and have sent patches to
> Chris in the past,
Hi!
Judging from recent messages on linux-kernel and from the code which is
currently in 2.4.x the qlogicfc driver needs to be updated a bit. I have
done some amount of work on this driver and have sent patches to
Chris in the past, however I did not receive any comments on my changes.
It
My previous mail about Qlogic Fiber Channel driver didn't get so many
attention.
The QLogic support is like a wall. You can't use a normal e-mail. Instead
of that you should use a http form. And the answer you get is anonymous and
IMHO a standart one.
"... Please check our site periodically for
4 matches
Mail list logo
