On Fri, 04 Feb 2005 23:16:22 +1100, Rusty Russell [EMAIL PROTECTED] wrote:
[...] I have since then had multiple
ext3 and ext2 errors: 2.6.8, 2.6.9, 2.6.10 and 2.6.11-rc3 all exhibit
the problem within an hour of stress (untarring a fresh kernel tree, cp
-al'ing to apply patches repeatedly, my
On Friday 04 February 2005 12:55 pm, Alan Stern wrote:
The most likely explanation seems to be hardware problems. Particularly
for high-speed USB devices, 2.6 drives the hardware much closer to the
limit than 2.4 or Windows (to judge by the problem reports we've seen).
Agreed ... though
Is USB/SCSI just terminally broken under 2.6?
David I don't think so, but there are problems that appear in some
David hardware configs and not others. Many folk report no problems;
David a (very) few report nothing but.
This is just a chime in to let people know others are seeing problems
I don't know if it's related, but -
I have been using Maxtor OneTouch USB Drive,so far without problems, but
today after upgrading to FC3 2.6.10-760 kernel I just recieved this in
dmesg
usb 1-1: USB disconnect, address 2
scsi0 (0:0): rejecting I/O to device being removed
scsi0 (0:0): rejecting
On Fri, Feb 04, 2005 at 07:40:13PM -0500, Parag Warudkar wrote:
I don't know if it's related, but -
I have been using Maxtor OneTouch USB Drive,so far without problems, but
today after upgrading to FC3 2.6.10-760 kernel I just recieved this in
dmesg
Does 2.6.11-rc3 have this same issue?
On Wed, Feb 02, 2005 at 09:26:10PM +0100, Pavel Machek wrote:
Hi!
From: Bernard Blackham [EMAIL PROTECTED]
This fixes types in USB w.r.t. driver model. It should not actually
change any code. Please apply,
Pavel
Does 2.6.11-rc3 have this same issue?
thanks,
greg k-h
I just compiled 2.6.11-rc3 booted and then again did a kernel compile on
the USB disk - no problems.
With FC 2.6.10 kernel I am able to reproduce the problem within no time
- seems something is seriously broken in FC3 latest kernel.
On Fri, Feb 04, 2005 at 09:30:45PM -0500, Parag Warudkar wrote:
Does 2.6.11-rc3 have this same issue?
thanks,
greg k-h
I just compiled 2.6.11-rc3 booted and then again did a kernel compile on
the USB disk - no problems.
Great!
With FC 2.6.10 kernel I am able to reproduce the
On Fri, Feb 04, 2005 at 10:33:50AM -0800, Andrew Morton wrote:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc3/2.6.11-rc3-mm1/
- The bk-usb and bk-pci and bk-driver-core trees have been temporarily
dropped from -mm, for they are not healthy at present.
Ok, I've
On Thu, 3 Feb 2005, Andrew Morton wrote:
Which implies that we need to see some additional accounting code, so we
can verify that the base accumulation infrastructure is doing the expected
thing. As well as an ack from the interested parties. Does anyone know
what's happening with all the
Hi!
I'd love to see it too. Pavel, even if you don't want to merge it for a
while, we can always incorporate it in the Suspend2 patches so it gets
some testing. I know I'd try it on my i830 based Omnibook.
Can we use call_usermodehelper at this early resume stage (before any
video
On Thursday 03 February 2005 06:47, Shane Hathaway wrote:
The attached patch enhances the kernel's DHCP client support (in
net/ipv4/ipconfig.c) to set the interface MTU if provided by the DHCP server.
Without this patch, it's difficult to netboot on a network that uses jumbo
frames. The
Hi,
On Fri, 4 Feb 2005 01:22:54 -0600, Olof Johansson [EMAIL PROTECTED] wrote:
+#define CPU_HAS_FEATURE(x) (cur_cpu_spec-cpu_features CPU_FTR_##x)
+
Please drop the CPU_FTR_##x macro magic as it makes grepping more
complicated. If the enum names are too long, just do s/CPU_FTR_/CPU_/g
or
When I try to write to a UDF fs on a USB-connected Ricoh dvd-burner,
(specificly, create a directory)
I get:
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage:
On Thu, Feb 03, 2005 at 05:13:05PM -0800, YhLu wrote:
CC arch/x86_64/kernel/asm-offsets.s
arch/x86_64/kernel/asm-offsets.c: In function `main':
arch/x86_64/kernel/asm-offsets.c:65: error: invalid application of `sizeof'
to an incomplete type
arch/x86_64/kernel/asm-offsets.c:66: error:
Stephen C. Tweedie writes:
Hi,
On Thu, 2005-02-03 at 22:42, Mikael Pettersson wrote:
I believe there is some accounting error in the ext3 code
for the case when CONFIG_EXT3_FS_XATTR is not selected.
Whenever any one of my development boxes triggers an fsck
at boot because
[Sorry for the sensational title]
I have had this laptop for three years. It ran Linux (Debian unstable)
from the start and its hardware has been very unreliable: I changed
hard disks twice and the motherboard thrice. My DVD drive started
failing some days ago (this one is 'original', 3 years
Pavel Roskin [EMAIL PROTECTED] wrote:
I'm writing a module under a proprietary license.
You shouldn't, although many people do. It's a derived work and hence the
GPL is applicable. The only exception we make is for code which was
written for other operating systems and was then ported to
Christoph Lameter writes:
If the program does not use these cache lines then you have wasted time
in the page fault handler allocating and handling them. That is what
prezeroing does for you.
The program is going to access at least one cache line of the new
page. On my G5, it takes _less_
Le vendredi 04 f?rier 2005 10:03 +0100, jerome lacoste a crit :
[Sorry for the sensational title]
I have had this laptop for three years. It ran Linux (Debian unstable)
from the start and its hardware has been very unreliable: I changed
hard disks twice and the motherboard thrice. My DVD
advantage of all the optimizations that modern memory subsystems have for
linear accesses. And if hardware exists that can offload that from the cpu
then the cpu caches are only minimally affected.
I can believe that prezeroing could provide a benefit on some
machines, but I don't think
Ian Godin [EMAIL PROTECTED] wrote:
I am trying to get very fast disk drive performance and I am seeing
some interesting bottlenecks. We are trying to get 800 MB/sec or more
(yes, that is megabytes per second). We are currently using
PCI-Express with a 16 drive raid card (SATA
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
the patch fixes the noexec= boot option on x86_64 to actually work when other
options come after it.
Credits (if any ;)) should go to Matt Zimmerman and Colin Watson for spotting
the problem and providing/testing the fix.
Best Regards,
Fabio
On Fri, 2005-02-04 at 01:20 -0800, Andrew Morton wrote:
Pavel Roskin [EMAIL PROTECTED] wrote:
I'm writing a module under a proprietary license.
You shouldn't, although many people do. It's a derived work and hence the
GPL is applicable. The only exception we make is for code which was
One of my machines is running into an uncorrectable machine check
exception. The MCA error code is 0x152, but AMD's documentation
(AMD64 Architecture Programmer's Manual Volume 2: System
Programming) only contains a self-reference and no actual explanation
of the error codes.
Any hints on how to
Hi Mark, Alexey,
+ /* 0x17 - USB */
+ /* 0x18 - Virtual buses */
+#define I2C_ALGO_MV64XXX 0x19 /* Marvell mv64xxx i2c ctlr
*/
While I searched for typos and you're fixing
This patch is from David Woodhouse [EMAIL PROTECTED].
We were pretending that every syscall returned zero. Don't do that.
Signed-Off-By: David Woodhouse [EMAIL PROTECTED]
Signed-off-by: Paul Mackerras [EMAIL PROTECTED]
= arch/ppc64/kernel/entry.S 1.51 vs edited =
---
This patch is from Nathan Lynch [EMAIL PROTECTED].
Make the physical_id cpu sysfs attribute on ppc64 show -1 instead of
65535 for non-present cpus.
Signed-off-by: Nathan Lynch [EMAIL PROTECTED]
Signed-off-by: Paul Mackerras [EMAIL PROTECTED]
diff -puN
i have released the -V0.7.38-01 Real-Time Preemption patch, which can be
downloaded from the usual place:
http://redhat.com/~mingo/realtime-preempt/
Changes since -37-03:
- merged to 2.6.11-rc3
- deadlock-tracer fix from Eugeny S. Mints
- converted an oprofile spinlock to raw, which
I found out that I can't strace automount under 2.6.11-rc3:
# strace -p 1002
--- SIGSTOP (Stopped (signal)) ---
--- SIGSTOP (Stopped (signal)) ---
poll([{fd=3, events=POLLIN}, {fd=5, events=POLLIN}], 2, -1) = -1 EINTR
(Interrupted system call)
--- SIGALRM (Alarm clock) ---
and strace bails out.
Hi,
Hi Eric,
Hi Vivek and Eric,
IMHO, why don't we swap not only the contents of the top 640K
but also kernel working memory for kdump kernel?
I guess this approach has some good points.
1.Preallocating reserved area is not mandatory at boot time.
Hi, Stelian!
One thing everyone creating kernel patches with subversion
must be aware of, is the fact that the subversion built-in diff command does
not understand the gnu diff -p flag (or indeed, any gnu diff flags at all,
with the exception of -u, which is the default anyway).
Thus you must
This patch is from Jimi Xenidis [EMAIL PROTECTED].
The hvcs driver does not register a devfs_name resulting in devfs
creating /dev/NULL* entries.
The following one line patch remedies the problem.
Signed-off-by: Jimi Xenidis [EMAIL PROTECTED]
Signed-off-by: Paul Mackerras [EMAIL PROTECTED]
---
This patch is from Stephen Rothwell [EMAIL PROTECTED].
This patch just replaces the last usage of the vio dma mapping routines
with the equivalent generic dma mapping routines.
Signed-off-by: Stephen Rothwell [EMAIL PROTECTED]
Signed-off-by: Paul Mackerras [EMAIL PROTECTED]
diff -ruNp
Am Freitag, 4. Februar 2005 08:48 schrieb Pavel Machek:
What about simply blocking all video accesses before disk (etc) is
resumed, so that normal (not locked in memory) application can be
used?
Very bad for debugging. Genuine serial ports are becoming rarer.
Regards
Nick Piggin [EMAIL PROTECTED] skrev:
No none yet, which is what we should get to the
bottom of. I must be overlooking something, but the
only ways I can see should be due to transient
conditions like page locked or under writeback.
laptop_mode?
Terje, what is /proc/sys/vm/laptop_mode
jerome lacoste wrote:
[Sorry for the sensational title]
I have had this laptop for three years. It ran Linux (Debian unstable)
from the start and its hardware has been very unreliable: I changed
hard disks twice and the motherboard thrice. My DVD drive started
failing some days ago (this one is
Hi,
On Fri, 2005-02-04 at 08:25, Mikael Pettersson wrote:
In which kernel(s) exactly? There was a fix for that applied fairly
recently upstream.
I've been seeing this over the last couple of months, with
(at least) 2.4.28 and newer, and 2.6.9 and newer standard kernels.
But since I
Mickael Marchand wrote:
Hello,
I am having the same kind of troubles (can't tune and mt_set_frequency
-121 errors) since 2.6.10 (it was working in 2.6.9) on amd64.
this patch did not help sadely.
I have the same problem, but on x86, the attached patch fixed it for me.
--
Guillaume
---
In article [EMAIL PROTECTED] you wrote:
I halted the machine correctly yesterday night. I never dropped the
box in 3 years. Am I just being unlucky? Or could the fact that I am
using Linux on the box affect the reliability in some ways on that
particular hardware (Dell Inspiron 8100)? I run
On Fri, Feb 04, 2005 at 12:18:27PM +0200, Michael S. Tsirkin wrote:
Hi, Stelian!
One thing everyone creating kernel patches with subversion
must be aware of, is the fact that the subversion built-in diff command does
not understand the gnu diff -p flag (or indeed, any gnu diff flags at all,
Quoting r. Stelian Pop [EMAIL PROTECTED]:
Subject: Re: [RFC] Linux Kernel Subversion Howto
On Fri, Feb 04, 2005 at 12:18:27PM +0200, Michael S. Tsirkin wrote:
Hi, Stelian!
One thing everyone creating kernel patches with subversion
must be aware of, is the fact that the subversion
On Thu, Feb 03, 2005 at 10:21:12AM -0800, Andrew Morton wrote:
The echo method method sounds good. Do we think that's feasible for
2.6.11, or would it be safer to disable low-latency mode for that driver?
As a temporary workaround, dropping the lock should also work:
---
Hirokazu Takahashi [EMAIL PROTECTED] writes:
Hi,
Hi Eric,
I see you have.
And MIPS CPUs doesn't allow kernel pages to be remapped either.
I guess I should add to be relocatable in the general case most
likely requires running a PIC dynamic linker at kernel startup.
If none of the
On Fri, Feb 04, 2005 at 01:08:35PM +0200, Michael S. Tsirkin wrote:
There is a section called How do I generate 'proper' diffs ? dealing
with this.
Stelian.
--
Stelian Pop [EMAIL PROTECTED]
Yep but the trick with --diff-cmd has the advantage of not changing the
default
jerome lacoste wrote:
Attached the output of smartctl -a /dev/hda, whatever that helps.
Judging from the SMART output, this drive seems hosed. All firmware
controlled extended off-line self-tests have failed on LBA 92491576, and
it has a worrying amount of re-allocated sectors.
New laptop
Could a hardware failure look like bad sectors to fsck?
A failure of the bus or a former sporadic error can cause defective fs, but
normally you have a read error in fsck no structure error.
Are you using hdparm? is the system perhaps overheating or overclocked?
no overclock
hdparm is
Oliver Neukum schrieb:
Am Freitag, 4. Februar 2005 08:48 schrieb Pavel Machek:
What about simply blocking all video accesses before disk (etc) is
resumed, so that normal (not locked in memory) application can be
used?
Very bad for debugging. Genuine serial ports are becoming rarer.
As a
Hello Linus,
you can either use bk receive to patch with this mail,
or you can
Pull from: bk://krusty.dt.e-technik.uni-dortmund.de/BK-kernel-tools
or in cases of dire need, you can apply the patch below.
BK: Parent repository is http://bktools.bkbits.net/bktools
Patch description:
[EMAIL
Hi Jerome :)
* jerome lacoste [EMAIL PROTECTED] dixit:
[Sorry for the sensational title]
It catched my attention ;)))
I halted the machine correctly yesterday night. I never dropped the
box in 3 years. Am I just being unlucky? Or could the fact that I am
using Linux on the box
Xavier Bestel [EMAIL PROTECTED] wrote:
I just got this Oops with 2.6.10 (debian/sid stock kernel).
Kernel is tainted by VMWare, but it wasn't used (machine powered on
remotely and used just to run gaim though ssh). I can perhaps try to
reproduce it without it though if you need.
Hmmm... I
[EMAIL PROTECTED] (Eric W. Biederman) writes:
Hirokazu Takahashi [EMAIL PROTECTED] writes:
Most of this just results in easier management between the pieces.
Which is a good thing. However at the moment I don't think it
simplifies any of the core problems. I still need to reserve
a
Please keep me CCd
jerome lacoste wrote:
particular hardware (Dell Inspiron 8100)? I run Linux on 3 other
I have this exact same laptop. It works perfectly for me with linux.
Originally started with a 2.4 kernel and recently went to 2.6.10. The modem
works well, the video card works well
On Friday 04 February 2005 11:32, Carl-Daniel Hailfinger wrote:
Oliver Neukum schrieb:
Am Freitag, 4. Februar 2005 08:48 schrieb Pavel Machek:
What about simply blocking all video accesses before disk (etc) is
resumed, so that normal (not locked in memory) application can be
used?
Very
Jon Smirl schrieb:
Reseting a video card from suspend is essentially the same problem as
reseting secondary video cards on boot. The same code can address both
problems.
Some things to consider
1) With multiple video cards you have to ensure only a single VGA gets
enabled. Running
OK, I recently made the mistake of buying a USB case with a drive in it
and putting my home directory on it. I have since then had multiple
ext3 and ext2 errors: 2.6.8, 2.6.9, 2.6.10 and 2.6.11-rc3 all exhibit
the problem within an hour of stress (untarring a fresh kernel tree, cp
-al'ing to
I've been experiencing hangs with kernel 2.6.10-ac11 and also previous
ac-series. The affected box is a quite loaded Dual-Xeon HT system.
The kernel was built with gcc-2.95 (Debian woody).
Sysrq-b on ac11 brings the following and the completely hangs, i.e. no
sysrq responses anymore:
SysRq :
H. Peter Anvin [EMAIL PROTECTED] writes:
This updates the FAT attributes as well as (hopefully) corrects the
handling of VFAT ctime. The FAT attributes are implemented as a
32-bit ioctl, per the previous discussions.
[...]
+ /* This MUST be done before doing anything
On Freedag 04 Februar 2005 08:22, Olof Johansson wrote:
It's getting pretty old to have see and type cur_cpu_spec-cpu_features
CPU_FTR_feature, when a shorter and less TLA-ridden macro is more
readable.
This also takes care of the differences between PPC and PPC64 cpu
features for the
[EMAIL PROTECTED] (Fabio Massimo Di Nitto) writes:
Hi,
the patch fixes the noexec= boot option on x86_64 to actually work when
other
options come after it.
Credits (if any ;)) should go to Matt Zimmerman and Colin Watson for spotting
the problem and providing/testing the fix.
Thanks
On Thu, Feb 03, 2005 at 02:28:54PM -0800, Larry McVoy wrote:
CVS BitKeeper [*]
Deltas 235,956 280,212
Indeed, for now the differences are rather small. But with more and
more BK trees and more merges between them the proportion will raise.
Actually
Hi,
That one should go into 2.6.11.
- fix initialization order bug.
- disable + comment current secam tweak, will not work that way ...
Signed-off-by: Gerd Knorr [EMAIL PROTECTED]
---
drivers/media/video/tda9887.c | 11 ---
1 files changed, 8 insertions(+), 3 deletions(-)
diff -u
Stephen C. Tweedie writes:
Hi,
On Fri, 2005-02-04 at 08:25, Mikael Pettersson wrote:
In which kernel(s) exactly? There was a fix for that applied fairly
recently upstream.
I've been seeing this over the last couple of months, with
(at least) 2.4.28 and newer, and
On Sun, Jan 30, 2005 at 11:31:26AM +0100, Peter Osterlund wrote:
mousedev_packet() incorrectly clears list-ready when called with
tail == head - 1. The effect is that the last mouse event from the
hardware isn't reported to user space until another hardware mouse
event arrives. This can make
On Sun, Jan 30, 2005 at 06:39:37PM -0500, Dmitry Torokhov wrote:
On Sunday 30 January 2005 10:45, Roman Zippel wrote:
Hi,
On Sat, 29 Jan 2005, Dmitry Torokhov wrote:
Ok, what about making some submenus to manage number of options, like in
the patch below?
I'd rather move it
On Fri, 4 Feb 2005 07:35:20 +0100, Vojtech Pavlik [EMAIL PROTECTED] wrote:
/*
+ * Try to initialize the IBM TrackPoint
+ */
+ if (max_proto PSMOUSE_PS2 trackpoint_init(psmouse) == 0) {
+ psmouse-vendor = IBM;
+ psmouse-name = TrackPoint;
+
+
On Sun, Jan 30, 2005 at 11:35:12AM +0100, Peter Osterlund wrote:
Only parse a z == 127 packet as a relative Dualpoint stick packet if
the touchpad actually is a Dualpoint device. The Glidepoint models
don't have a stick, and can report z == 127 for a very wide finger. If
such a packet is
On Thu, Feb 03, 2005 at 10:54:51PM +0100, Peter Osterlund wrote:
Here it is, with the suggestions from Pete and Dmitry included. The
patch does the following:
* Compensates for the lack of floating point arithmetic by keeping
track of remainders from the integer divisions.
* Removes the
On Sun, Jan 30, 2005 at 11:36:48AM +0100, Peter Osterlund wrote:
Some Synaptics touchpads have a middle mouse button that also works as
a scroll wheel. Scroll data is reported as packets with w == 2 and
the scroll amount in byte 1, treated as a signed character. For some
reason, the smallest
On Thu, Feb 03, 2005 at 03:18:20PM +0100, Fruhwirth Clemens wrote:
Way too complicated. This is a crypto project, why does nobody think of
crypto to solve the problem :). Here's the idea:
[see original post, http://lkml.org/lkml/2005/2/3/109 , for idea]
Very simple patch. With that, it's
On Fri, Feb 04, 2005 at 07:40:43AM +0100, Peter Osterlund wrote:
Vojtech Pavlik [EMAIL PROTECTED] writes:
On Thu, Feb 03, 2005 at 10:54:51PM +0100, Peter Osterlund wrote:
* Removes the xres/yres scaling so that you get the same speed in the
X and Y directions even if your screen is
On Fri, Feb 04, 2005 at 08:17:43AM -0500, Stephen Evanchik wrote:
On Fri, 4 Feb 2005 07:35:20 +0100, Vojtech Pavlik [EMAIL PROTECTED] wrote:
/*
+ * Try to initialize the IBM TrackPoint
+ */
+ if (max_proto PSMOUSE_PS2 trackpoint_init(psmouse) == 0) {
+
On Fri, 4 Feb 2005 14:14:36 +0100, Vojtech Pavlik [EMAIL PROTECTED] wrote:
On Sun, Jan 30, 2005 at 06:39:37PM -0500, Dmitry Torokhov wrote:
On Sunday 30 January 2005 10:45, Roman Zippel wrote:
Hi,
On Sat, 29 Jan 2005, Dmitry Torokhov wrote:
Ok, what about making some submenus to
Hi,
I was investigating a way to hide the dm-crypt key from device-mapper
configuration IOCTLs since the key might accidentally end up somewhere
it shouldn't (see other thread).
Then I stumbled across the new key retention service. This is exectly
what I was looking for.
The idea is to add the
On Fri, 2005-02-04 at 13:17 +0100, Carl-Daniel Hailfinger wrote:
Jon Smirl schrieb:
A starting place for a user space reset program:
ftp://ftp.scitechsoft.com/devel/obsolete/x86emu/x86emu-0.8.tar.gz
This thread talks about the VGA routing code:
http://lkml.org/lkml/2005/1/17/347
Martin Kögler wrote:
As a temporary workaround, dropping the lock should also work:
This looks good to me, and seems much more reasonable
that changing driver interfaces.
Treat tty_flip_buffer_push(tty) as something that
can call back into your driver (which *is* the case for low_latency),
so
Hi,
On Fri, 2005-02-04 at 13:10, Mikael Pettersson wrote:
Plain upstream 2.4.28? If so, that's probably the trouble, as 2.4
doesn't have any xattr support, so if you delete a file on 2.4 it won't
delete the xattr block for it.
2.4.28 - certainly I've used that at lot.
But plain
On Fri, Feb 04, 2005 at 08:51:41AM -0500, Dmitry Torokhov wrote:
On Fri, 4 Feb 2005 14:14:36 +0100, Vojtech Pavlik [EMAIL PROTECTED] wrote:
On Sun, Jan 30, 2005 at 06:39:37PM -0500, Dmitry Torokhov wrote:
On Sunday 30 January 2005 10:45, Roman Zippel wrote:
Hi,
On Sat, 29 Jan
Am Mittwoch, den 02.02.2005, 20:05 -0800 schrieb Matt Mackall:
Dunno here, seems that having one tool that gave the kernel a key named
foo and then telling dm-crypt to use key foo is probably not a bad
way to go. Then we don't have stuff like echo key | dmsetup create
and the like and the
On Fri, 4 Feb 2005 14:45:28 +0100, Vojtech Pavlik [EMAIL PROTECTED] wrote:
On Fri, Feb 04, 2005 at 08:17:43AM -0500, Stephen Evanchik wrote:
On Fri, 4 Feb 2005 07:35:20 +0100, Vojtech Pavlik [EMAIL PROTECTED] wrote:
Indeed. IIRC this patch killed wheel mouse detection in ubuntu.
Earlier
Hi,
On Fri, 4 Feb 2005, Vojtech Pavlik wrote:
When I go into a menu I explore option and submenus from top to bottom.
So I will see PS/2 or serial, and will go there and select what I need.
Then I will see that generic input layer is also needed for keyboard
and go there.
If generic
On Fri, 4 Feb 2005 07:54:54 +0100, Vojtech Pavlik [EMAIL PROTECTED] wrote:
On Fri, Feb 04, 2005 at 01:52:39AM -0500, Dmitry Torokhov wrote:
On Friday 04 February 2005 01:35, Vojtech Pavlik wrote:
On Thu, Feb 03, 2005 at 07:34:16PM -0500, Dmitry Torokhov wrote:
On Thursday 03 February
Stephen C. Tweedie writes:
Hi,
On Fri, 2005-02-04 at 13:10, Mikael Pettersson wrote:
Plain upstream 2.4.28? If so, that's probably the trouble, as 2.4
doesn't have any xattr support, so if you delete a file on 2.4 it won't
delete the xattr block for it.
2.4.28 -
On Fri, 4 Feb 2005 15:13:31 +0100 (CET), Roman Zippel
[EMAIL PROTECTED] wrote:
Hi,
On Fri, 4 Feb 2005, Vojtech Pavlik wrote:
When I go into a menu I explore option and submenus from top to bottom.
So I will see PS/2 or serial, and will go there and select what I need.
Then I will
On Sun, Jan 30, 2005 at 04:45:35PM +0100, Roman Zippel wrote:
Hi,
On Sat, 29 Jan 2005, Dmitry Torokhov wrote:
Ok, what about making some submenus to manage number of options, like in
the patch below?
I'd rather move it to the bottom and the menus had no dependencies.
Below is an
What is the status of sk98lin? Do we have to wait until Syskonnect gets
their act together
and write a new driver for 2.6.10?
Their latest is Oct 2004 and not at all compatible with 2.6.10 and beyond.
RaXeT
-
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a
Le vendredi 04 fvrier 2005 00:03 -0500, Jon Smirl a crit :
Doing this in user space lets you have two reset
programs, vm86 and emu86 for non-x86 machines.
Perhaps only emu86 should be used, to have a well-debugged codepath on
all archs (amd64, ppc, ...)
As it's usermode, the code size is less
On Fri, 4 Feb 2005 07:18:17 -0500, Wakko Warner [EMAIL PROTECTED] wrote:
Please keep me CCd
jerome lacoste wrote:
particular hardware (Dell Inspiron 8100)? I run Linux on 3 other
I have this exact same laptop. It works perfectly for me with linux.
Originally started with a 2.4 kernel
Hi,
On Fri, 4 Feb 2005, Dmitry Torokhov wrote:
The generic input layer submenu is comparable to SCSI or ALSA and
has similar menu structure with userland interfaces on top and drivers
below them. Hardware ports (serio, gameport) live outside of generic
input layer and are shown there so they
On Fri, Feb 04, 2005 at 09:17:33AM -0500, Dmitry Torokhov wrote:
It is still a problem if driver is registered after the port has been
detected wich quite often is the case as many people have psmouse as a
module.
I wonder if we should make driver registration asynchronous too.
Probably
On Fri, Feb 04, 2005 at 01:22:54AM -0600, Olof Johansson wrote:
Hi,
It's getting pretty old to have see and type cur_cpu_spec-cpu_features
CPU_FTR_feature, when a shorter and less TLA-ridden macro is more
readable.
This also takes care of the differences between PPC and PPC64 cpu
On Thu, Feb 03, 2005 at 06:30:59AM -0600, Jonathan A. George wrote:
...
** As noted previously it would be interested to see the opinion of a
U.S. IP lawyer who has conclusively tested the impact of copy right law
where the boundary of what constitutes a derivative work was explicitly
What is the proper way to setup a real counting semaphore under the
-RT kernel?
I've noticed that just using a struct semaphore, normal counting
semaphore usage[*] can trigger the lock recursion deadlock in
kernel/rt.c since 'struct semaphore' now uses an rt_mutex.
What I've done for now is to
On Wed, Feb 02, 2005 at 05:17:01PM -0800, Neil Whelchel wrote:
Hello,
Hi Neil,
I just thought that in case anyone wants to contact me it would be easier
if I was listed in the CREDITS file...
N: Neil Whelchel
E: [EMAIL PROTECTED]
W: http://firstlight.net/~koyama
D: Cypress M8 driver,
On Thu, 2005-02-03 at 11:23 -0800, Bryan Henderson wrote:
And for the vmscan-writepage() side of things I wonder if it would
be
possible to overload the mapping's -nopage handler. If the target
page
lies in a hole, go off and allocate all the necessary pagecache
pages, zero
On Fri, 4 Feb 2005, Gerd Knorr wrote:
That one should go into 2.6.11.
- fix initialization order bug.
I applied your earlier patch already. Can you verify that I merged
everything correctly, and that my current BK tree matches yours?
Linus
-
To unsubscribe from this
On Fri, Feb 04, 2005 at 02:01:27PM +0100, Stelian Pop wrote:
On Thu, Feb 03, 2005 at 02:28:54PM -0800, Larry McVoy wrote:
CVS BitKeeper [*]
Deltas 235,956 280,212
Indeed, for now the differences are rather small. But with more and
On Wed, 2005-02-02 at 19:07 -0500, Pavel Roskin wrote:
There will be a GPL'd layer, and it's likely that sysfs interaction will
be on the GPL'd side anyway, for purely technical reasons.
Be very careful if distributing your driver in two parts -- a GPL'd part
and a part which you claim is not
We have had a similar problem with all kernels since 2.6.8.1. It has
gotten so bad that we had to drop back to 2.6.7 with some extra patches
to get our systems working. Our situation is a little bit different.
We are using smp Opteron boxes as NFS servers. Under almost any load at
all,
Hi!
What about simply blocking all video accesses before disk (etc) is
resumed, so that normal (not locked in memory) application can be
used?
Very bad for debugging. Genuine serial ports are becoming rarer.
As a bonus, even genuine serial ports may be in undefined state after
resume.
101 - 200 of 672 matches
Mail list logo
