Andrew Morton wrote:
On Thu, 29 Nov 2007 14:30:14 +0530 Kamalesh Babulal [EMAIL PROTECTED] wrote:
Hi Andrew,
While running file system stress on nfs and cifs mounted partitions, the
machine
drops to xmon
1:mon e
cpu 0x1: Vector: 300 (Data Access) at [c00080a9f880]
pc:
On Thu, 29 Nov 2007, Russell King - ARM Linux wrote:
On Thu, Nov 29, 2007 at 12:27:30PM +0100, Remy Bohmer wrote:
Ah, and looking at the changes to the file, the addition of the mask
and unmask was done by someone who didn't understand what this was
trying to do. So that change should be
We don't need to flush all CPUs. This is my rationale: The debug
exception (single-step trap) will always happen on the same CPU that
the page fault occurred on. Page fault shows the page, debug exception
hides the page again. Between those two operations, nothing else can
You're ignoring
On Wed, 2007-11-28 at 12:25 -0800, Lee Schermerhorn wrote:
Couldn't find one of these on the lists...
PATCH 2.6.24-rc3-mm1: bnx2x depends on ZLIB_INFLATE
The bnx2x module depends on the zlib_inflate functions. The
build will fail if ZLIB_INFLATE has not been selected manually
or by
On Thu, Nov 29, 2007 at 12:27:30PM +0100, Remy Bohmer wrote:
Hello Russell,
If 'no' then it's the right handler and the mask/unmask methods associated
with the interrupt will be no-ops.
I completely understand what you keep on saying, but that would imply
that the following piece of
Setting a display timing parameter too high or too low may cause it to
wrap around and thus become completely wrong. Validate the timings in
atmel_lcdfb_check_var() and saturate to the highest or lowest possible
value if necessary.
Signed-off-by: Haavard Skinnemoen [EMAIL PROTECTED]
---
Quoting Andrew Morton ([EMAIL PROTECTED]):
On Thu, 29 Nov 2007 11:28:28 +0100 Cedric Le Goater [EMAIL PROTECTED] wrote:
Index: 2.6.24-rc3-mm2/include/linux/sched.h
===
--- 2.6.24-rc3-mm2.orig/include/linux/sched.h
+++
Hi Pete, hi all,
On Mi, 28 Nov 2007, Pete Zaitcev wrote:
It looks like the Huawei E220 saga is not over yet. A collegue of mine,
David Russll, reported that the modem does not work reliably on Fedora 8,
which does have the initializer in usb-storage.
That is what I said.
it's random which
On Do, 29 Nov 2007, preining wrote:
So to be clear: kernl 2.6.24-rc3 + your patch gives me permanent cycles
and an error:
option_start_huawei: HUAWEI E220 setup failed (1)
I attach the syslog part which exhibits the behaviour.
Now really attached.
Best wishes
Norbert
Hello Russell,
If people insist on adding the mask/unmask crap to it, the function
might as well be deleted and be an alias for handle_level_IRQ. Because
that's _precisely_ what you lot are turning it into.
First, I want to make clear that I am just debugging a problem on RT
that does not
Hi,
I've just built 2.6.24-rc3-git4 and got the following two warnings.
LD .tmp_vmlinux1
KSYM .tmp_kallsyms1.S
AS .tmp_kallsyms1.o
LD .tmp_vmlinux2
KSYM .tmp_kallsyms2.S
AS .tmp_kallsyms2.o
LD vmlinux.o
MODPOST vmlinux.o
WARNING:
On Thu, Nov 29, 2007 at 04:00:57AM -0800, Roland McGrath wrote:
...lots of ptrace merging...
Can you make sure that UML still runs when you're done with ptrace?
Jeff
--
Work email - jdike at linux dot intel dot com
-
To unsubscribe from this list: send the line
If everything's working please also add code to also support the other
E220 device... so both PID 0x1003 and 0x1004 should be treaded the
same way...
to test the device with the 0x1004-PID maybe Jaime Velasco
[EMAIL PROTECTED] could be asked.. he initialy added the lines
for this device
I'll give it a go later today, still on 2.6.22.4.
Any logs of interest except for obvious behavior?
On Thu, 29 Nov 2007 15:05:50 +0100
Johann Wilhelm [EMAIL PROTECTED] wrote:
If everything's working please also add code to also support the other
E220 device... so both PID 0x1003 and 0x1004
Jan Kara wrote:
On Thu 29-11-07 17:27:08, Kamalesh Babulal wrote:
Andrew Morton wrote:
On Thu, 29 Nov 2007 14:30:14 +0530 Kamalesh Babulal [EMAIL PROTECTED]
wrote:
Hi Andrew,
While running file system stress on nfs and cifs mounted partitions, the
machine
drops to xmon
1:mon e
cpu
On Thu, 29 Nov 2007 15:35:32 +0800, Li Zefan wrote:
Fix typo in comments.
BTW: I have to fix coding style in arch/ia64/kernel/time.c also,
otherwise checkpatch.pl will be complaining.
Signed-off-by: Li Zefan [EMAIL PROTECTED]
---
arch/ia64/kernel/time.c | 14 +++---
* Ingo Molnar [EMAIL PROTECTED] wrote:
i'm getting this on 32-bit (with the kmap-atomic debugging patch
applied):
Calling initcall 0x78b67c00: tipc_init+0x0/0xc0()
TIPC: Activated (version 1.6.2 compiled Nov 29 2007 15:04:36)
WARNING: at arch/x86/mm/highmem_32.c:52
On Thu 29-11-07 17:27:08, Kamalesh Babulal wrote:
Andrew Morton wrote:
On Thu, 29 Nov 2007 14:30:14 +0530 Kamalesh Babulal [EMAIL PROTECTED]
wrote:
Hi Andrew,
While running file system stress on nfs and cifs mounted partitions, the
machine
drops to xmon
1:mon e
cpu 0x1:
Am Donnerstag 29 November 2007 schrieb Kristoffer Ericson:
I'll give it a go later today, still on 2.6.22.4.
Any logs of interest except for obvious behavior?
dmesg
Regards
Oliver
-
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a
i'm getting this on 32-bit (with the kmap-atomic debugging patch
applied):
Calling initcall 0x78b67c00: tipc_init+0x0/0xc0()
TIPC: Activated (version 1.6.2 compiled Nov 29 2007 15:04:36)
WARNING: at arch/x86/mm/highmem_32.c:52 kmap_atomic_prot()
Pid: 1, comm: swapper Not
On Thu, Nov 29, 2007 at 03:18:04PM +0100, Remy Bohmer wrote:
Hello Russell,
If people insist on adding the mask/unmask crap to it, the function
might as well be deleted and be an alias for handle_level_IRQ. Because
that's _precisely_ what you lot are turning it into.
First, I want to
They say better strike when the iron is hot.
Since we have so many people discussing the memory controller, I would
like to access the readiness of the memory controller for mainline
merge. Given that we have some time until the merge window, I'd like to
set aside some time (from my other work
On Thu, 29 Nov 2007 14:03:19 +0100
Jan Kara [EMAIL PROTECTED] wrote:
Adding relevant people and lists to CC...
Honza
- Forwarded message from Anders Henke [EMAIL PROTECTED] -
Date: Thu, 29 Nov 2007 13:31:50
Some places where CLOCK_TICK_RATE may be used incorrectly:
arch/arm/mach-mx3/time.c:125: __raw_writel((v / CLOCK_TICK_RATE) - 1,
MXC_GPT_GPTPR);
drivers/watchdog/davinci_wdt.c:103: timer_margin = (((u64)heartbeat *
CLOCK_TICK_RATE) 0x);
drivers/watchdog/davinci_wdt.c:105:
Cedric Le Goater [EMAIL PROTECTED] writes:
From: Cedric Le Goater [EMAIL PROTECTED]
This patch includes the mqueue namespace in the nsproxy object. It
also adds the support of unshare() and clone() with a new clone flag
CLONE_NEWMQ (1 bit left in the clone flags !)
CLONE_NEWMQ is
On Tue, 27 Nov 2007 17:33:05 +0800
Zhang, Yanmin [EMAIL PROTECTED] wrote:
If echo 1/proc/sys/kernel/sched_compat_yield before starting
volanoMark testing, the result is very good with kernel 2.6.24-rc3 on
my 16-core tigerton.
1) If /proc/sys/kernel/sched_compat_yield=1, comparing with
On Mon, 26 Nov 2007 23:50:10 -0500
Konrad Rzeszutek [EMAIL PROTECTED] wrote:
sysfs files have ONE VALUE PER FILE, not a whole bunch of
different things in a single file. Please fix this.
The subparameters _are_ actually part of a single value, that value
being associated with the
On Mon, 26 Nov 2007 19:02:22 -0800 (PST)
Roland McGrath [EMAIL PROTECTED] wrote:
cf http://lkml.org/lkml/2007/10/3/41
To summarize: on Linux, SA_ONSTACK decides whether you are already on
the signal stack based on the value of the SP at the time of a
signal. If you are not already inside
On 2000-09-07, in
http://marc.info/?l=linux-kernelm=96836765403118w=2, Linus wrote:
Hmm.. I have this feeling that it would be much nicer to
just implement the NT system calls directly.
...
I wouldn't be adverse to supporting Wine better...
A few years on, Wine has matured to the point where
Hello Russell,
While I realise that, I'm telling you that the _problem_ is being
caused by the wrong handler being used.
Okay, I believe you... (someone told me once, Russell is right, and if
you do not believe him, he is still right ;-)
SA1100 and PXA have exactly the same setup. They use
On Thu, 2007-11-29 at 07:13 -0800, Dan Kegel wrote:
A few years on, Wine has matured to the point where it's
ready to run quite a few apps, even some protected by Safedisc.
One sticking point is that apps like Photoshop and probably
Punkbuster want to retrieve the hard drive's serial number
/sys/firmware/ibft/ethernet0/pci-bdf
5:1:0
shouldn't this somehow also have a symlink to the kernels ethX view of
ethernet devices?
(and if so.. how much of the info is duplicated..)
That NIC is used by the NIC firmware (or the BIOS) to negotiate
the iSCSI target. The information that
On Nov 28, 2007 6:44 PM, [EMAIL PROTECTED] wrote:
I built the same dynticks-enabled 2.6.23.9 kernel on a nearly identical
system with minor changes to reflect the slightly different hardware.
These two systems have identical MSI E7210 MasterX FA6R motherboards (same
model and revision.) The
Greg KH wrote:
On Wed, Nov 28, 2007 at 11:00:36PM -0500, Mark Lord wrote:
While doing insert/remove (quickly) tests on USB, I managed to trigger
an Oops on 2.6.23.1 on the call to strlen() in make_class_name().
This patch prevents this oops.
There is still the larger problem of the overall
On Wed, 28 Nov 2007, Greg KH wrote:
The other kobject fields which should be set, directly or indirectly, by
the creator are its ktype, kset, and parent. We will get to those shortly,
however please note that the ktype and kset must be set before the
kobject_init() function is called.
On Nov 29, 2007 7:37 AM, Xavier Bestel [EMAIL PROTECTED] wrote:
One sticking point is that apps like Photoshop and probably
Punkbuster want to retrieve the hard drive's serial number
So they can't be installed on a network drive ?
I think Adobe supports that, though perhaps not with the
On Thu, 29 Nov 2007, Cornelia Huck wrote:
The only problem arises when a child's driver retains a reference to
the parent kobject. If things are done properly, this reference should
involve incrementing the module count -- which would prevent the module
from being unloaded in the
On Thu, 29 Nov 2007 20:13:17 +0530
Balbir Singh [EMAIL PROTECTED] wrote:
They say better strike when the iron is hot.
Since we have so many people discussing the memory controller, I would
like to access the readiness of the memory controller for mainline
merge.
At the VM-Summit we
On Thu, 29 Nov 2007, Kay Sievers wrote:
And if someone calls kobject_put() after kobject_init() to clean up,
their release function will not be called if they didn't set the ktype.
So the check really belongs into kobject_init() IMO.
Right. And even though cleaning up no longer needs to
On Wed, 2007-11-28 at 13:09 -0800, Christoph Lameter wrote:
s390 has a special way to determine the pointer to a per cpu area
plus there is a way to access the base of the per cpu area of the
currently executing processor.
Note: I had to do a minor change to ASM code. Please check that
this
Quoting Al Boldi [EMAIL PROTECTED]:
Sure, browsing is the easy part, but Version Control starts when things
become writable.
But how is that supposed to work? What happens when you make some
changes to a file and save it? Do you want the git file system to
commit it right aways or wait
Greg KH wrote:
On Wed, Nov 28, 2007 at 11:00:36PM -0500, Mark Lord wrote:
While doing insert/remove (quickly) tests on USB, I managed to trigger
an Oops on 2.6.23.1 on the call to strlen() in make_class_name().
This patch prevents this oops.
There is still the larger problem of the overall
The file exit.c contains one useless extern declaration of sem_exit().
Moreover, it refers to nothing.
This trivial patch removes it.
Signed-off-by: Pierre Peiffer [EMAIL PROTECTED]
---
kernel/exit.c |2 --
1 file changed, 2 deletions(-)
Index: b/kernel/exit.c
On Thu, 2007-11-29 at 10:54 -0500, Alan Stern wrote:
On Thu, 29 Nov 2007, Kay Sievers wrote:
And if someone calls kobject_put() after kobject_init() to clean up,
their release function will not be called if they didn't set the ktype.
So the check really belongs into kobject_init() IMO.
I can't say I'm understading these traces very well, but here's a
snippet that looks a bit strange. I'm running 'while true; do date;
done' in parallel with the dd.
For some time it is doing 100% CPU as expected, then it goes into a
second or so of mosty idle (afaics), and then
On Thu, 29 Nov 2007, Raymano Garibaldi wrote:
The feature does work as long as the device remains plugged in and
that is what I have said in my previous postings too. What I'm saying
that should work and worked under 2.6.21 and is not working currently
is the ability to unplug and plug back
Alan Cox [EMAIL PROTECTED] wrote on 28/11/2007 19:50:42:
So as there is no question the current code does some ugly things it
is
even more true that we would be even more happy to use an official
API.
LSM was that and we were happily using it which we won't be able to do
if
it
New version of the unaligned access document I posted recently. Thanks for
all the feedback, I've learned a lot!
Changes:
- 'in between' spelling fix
- shortened example addresses for readability
- better summarised the common architectural differences in handling
unaligned access under Why
Rik van Riel wrote:
On Thu, 29 Nov 2007 20:13:17 +0530
Balbir Singh [EMAIL PROTECTED] wrote:
They say better strike when the iron is hot.
Since we have so many people discussing the memory controller, I would
like to access the readiness of the memory controller for mainline
merge.
At
Hello,
I've a machine with a Core2Duo CPU. /proc/cpuinfo reports the flag
constant_tsc, but at boot time, I have the log :
...
Total of 2 processors activated (6919.15 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -
On Thu, 29 Nov 2007, Jing Xue wrote:
By the way, the only SCM I have worked with that tries to mount its
repository (or a view on top of it) as a file system is ClearCase with
its dynamic views. And, between the buggy file system implementation,
the intrusion on workflow, and the lack of
Hello All,
I tested some more with the edge_triggered interrupt handler on AT91,
and I had already a long time a problem with the AT91SAM9261-EK kit,
that the DM9000 Ethernet controller did not work _at all_ on RT. I
just tried if the edge triggered interrupt handler works on that board
also. And
On Thu, 29 Nov 2007 17:04:40 +0100,
Kay Sievers [EMAIL PROTECTED] wrote:
On Thu, 2007-11-29 at 10:54 -0500, Alan Stern wrote:
On Thu, 29 Nov 2007, Kay Sievers wrote:
And if someone calls kobject_put() after kobject_init() to clean up,
their release function will not be called if
Roel Kluin wrote:
drivers/net/e1000/e1000_ethtool.c:113:
#define E1000_TEST_LEN sizeof(e1000_gstrings_test) / ETH_GSTRING_LEN
drivers/net/e1000e/ethtool.c:106:
#define E1000_TEST_LEN sizeof(e1000_gstrings_test) / ETH_GSTRING_LEN
E1000_TEST_LEN*ETH_GSTRING_LEN will expand to
On Thu, Nov 29, 2007 at 10:41:29AM -0500, Mark Lord wrote:
Greg KH wrote:
On Wed, Nov 28, 2007 at 11:00:36PM -0500, Mark Lord wrote:
While doing insert/remove (quickly) tests on USB, I managed to trigger
an Oops on 2.6.23.1 on the call to strlen() in make_class_name().
This patch prevents
* Miklos Szeredi [EMAIL PROTECTED] wrote:
to get symbolic stack backdumps for the wakeup points, and add
trace_special_sym() calls to generate extra stackdump entries at
arbitrary places. schedule() does not have it right now - it might
make sense to add it.
OK, this helped.
It
o Updating mail id for kdump maintainer
Signed-off-by: Vivek Goyal [EMAIL PROTECTED]
---
MAINTAINERS |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff -puN MAINTAINERS~update-kdump-maintainer-details MAINTAINERS
---
Al Viro [EMAIL PROTECTED] wrote on 28/11/2007 18:30:40:
On Wed, Nov 28, 2007 at 01:15:05PM -0500, [EMAIL PROTECTED] wrote:
(Note that the concept has interesting implications in the other
direction as
well - rather than stopping you from reading a file that has
malware, you could
in
On Thu, 2007-11-29 at 11:12 +1100, James Morris wrote:
On Wed, 28 Nov 2007, [EMAIL PROTECTED] wrote:
So as there is no question the current code does some ugly things it is
even more true that we would be even more happy to use an official API.
How about becoming involved in creating
On Thu, 29 Nov 2007 10:47:19 -0500 (EST),
Alan Stern [EMAIL PROTECTED] wrote:
On Thu, 29 Nov 2007, Cornelia Huck wrote:
The only problem arises when a child's driver retains a reference to
the parent kobject. If things are done properly, this reference should
involve incrementing
On Thu, 29 Nov 2007, Remy Bohmer wrote:
I changed the interrupt handler from the simple_irq to the edge_irq,
and it works...!!
(I added a noop routine for that .ack part, because there is no ack)
I believe I was too focussed on the masking bug in the RT kernel on
the simple_irq() that I
On Wed, 2007-11-28 at 17:07 -0800, Greg KH wrote:
The easiest way is as Al described above, just have the userspace
program that wrote the file to disk, check it then.
But the problem is that this isn't just Samba, this is a countless
myriad of different applications. And if one of them
On Nov 29 2007, FUJITA Tomonori wrote:
On Thu, 29 Nov 2007 14:03:19 +0100
Jan Kara [EMAIL PROTECTED] wrote:
Adding relevant people and lists to CC...
Honza
- Forwarded message from Anders Henke [EMAIL
[ 2.6.25 material ]
UML still needed some work in order to allow CFLAGS to be passed in
from the command line.
USER_CFLAGS is produced from KBUILD_CFLAGS in part by removing all the
-I switches. This is so that kernel headers don't accidentally get
pulled into libc files. However, a common use
[ 2.6.25 material ]
The declaration and implementation of __const_udelay use different
names for the parameter on a number of architectures:
include/asm-avr32/delay.h:15:extern void __const_udelay(unsigned long usecs);
arch/avr32/lib/delay.c:39:inline void __const_udelay(unsigned long xloops)
[ This should accompany git-x86.patch to mainline ]
git-x86.patch introduces asm-x86/asm.h. UML needs to follow this with
an asm/asm.h of its own.
Signed-off-by: Jeff Dike [EMAIL PROTECTED]
---
include/asm-um/asm.h |6 ++
1 file changed, 6 insertions(+)
Index:
[ 2.6.25 material ]
Style fixes in arch/um/os-Linux/irq.c and arch/um/os-Linux/sigio.c:
Updated copyrights
trimmed includes
added severity indicators to printks
CodingStyle fixes
turned an bunch of panics into printks
call some libc functions
On Thu, Nov 29, 2007 at 11:36:12AM -0500, Jon Masters wrote:
On Wed, 2007-11-28 at 17:07 -0800, Greg KH wrote:
The easiest way is as Al described above, just have the userspace
program that wrote the file to disk, check it then.
But the problem is that this isn't just Samba, this is a
On Thu, Nov 29, 2007 at 11:27:45AM -0500, Jon Masters wrote:
On Thu, 2007-11-29 at 11:12 +1100, James Morris wrote:
On Wed, 28 Nov 2007, [EMAIL PROTECTED] wrote:
So as there is no question the current code does some ugly things it is
even more true that we would be even more happy to
On Nov 29 2007 11:27, Jon Masters wrote:
They (virus protection folks) generally think they want to intercept
various system calls, such as open() and block until they have performed
a scan operation on the file. I explained the mmap issue [...]
If open and close was everything, then that would
On Thu, 29 Nov 2007 11:27:45 -0500
Jon Masters [EMAIL PROTECTED] wrote:
On Thu, 2007-11-29 at 11:12 +1100, James Morris wrote:
On Wed, 28 Nov 2007, [EMAIL PROTECTED] wrote:
So as there is no question the current code does some ugly things it is
even more true that we would be even
On Nov 29 2007 08:47, Greg KH wrote:
On Thu, Nov 29, 2007 at 11:36:12AM -0500, Jon Masters wrote:
On Wed, 2007-11-28 at 17:07 -0800, Greg KH wrote:
The easiest way is as Al described above, just have the userspace
program that wrote the file to disk, check it then.
But the problem is
On Mon, 26 Nov 2007 10:25:33 -0800
Agreed. On first glance, I was intrigued but:
1) Why is everyone so concerned that export symbol space is large?
- does it cost cpu or running memory?
yes. about 120 bytes per symbol
- does it cause bugs?
yes, bad apis are causing bugs...
On Thu, 29 Nov 2007, Cornelia Huck wrote:
Unfortunately kobjects don't have an owner field. In practice this
means that it isn't possible to pin the owner of some random kobject --
you have to know where the kobject came from or what it's embedded in.
All users of kobjects need to
On Thu, Nov 29, 2007 at 05:53:33PM +0100, Jan Engelhardt wrote:
But the problem is that this isn't just Samba, this is a countless
myriad of different applications. And if one of them doesn't support
on-access scanning, then the whole solution isn't worth using.
Ok, which specific
On Thu, Nov 29, 2007 at 11:19:40AM +0100, Miklos Szeredi wrote:
date-7119 0 15636591us!: schedule bash-502 (0 0)
bash-502 0 15643908us!: schedule date-7119 (0 0)
bash-502 0 15646250us!: schedule date-7120 (0 0)
How exactly did you end up getting this data?
And is
[EMAIL PROTECTED] wrote on 28/11/2007 19:20:26:
Tvrtko A. Ursulin [EMAIL PROTECTED] writes:
We here at Sophos (the fourth largest endpoint security vendor in
the world)
have such a module called Talpa which is a part of our main
endpoint security
product
What is a endpoint
On Thu, Nov 29, 2007 at 05:45:57PM +0100, Anders Henke wrote:
On Nov 29 2007, FUJITA Tomonori wrote:
@@ -3295,7 +3295,7 @@ static struct scsi_host_template adpt_template = {
.this_id= 7,
.cmd_per_lun= 1,
.use_clustering = ENABLE_CLUSTERING,
On Thu, Nov 29, 2007 at 05:53:33PM +0100, Jan Engelhardt wrote:
On Nov 29 2007 08:47, Greg KH wrote:
On Thu, Nov 29, 2007 at 11:36:12AM -0500, Jon Masters wrote:
On Wed, 2007-11-28 at 17:07 -0800, Greg KH wrote:
The easiest way is as Al described above, just have the userspace
Hi Daniel,
On Thu, Nov 29, 2007 at 04:15:23PM +, Daniel Drake wrote:
Unaligned memory accesses occur when you try to read N bytes of data starting
from an address that is not evenly divisible by N (i.e. addr % N != 0).
For example, reading 4 bytes of data from address 0x10004 is fine, but
On Thu, 2007-11-29 at 08:47 -0800, Greg KH wrote:
On Thu, Nov 29, 2007 at 11:36:12AM -0500, Jon Masters wrote:
On Wed, 2007-11-28 at 17:07 -0800, Greg KH wrote:
The easiest way is as Al described above, just have the userspace
program that wrote the file to disk, check it then.
On Thu, 29 Nov 2007, Kay Sievers wrote:
In fact, if we were designing the kobject API from scratch, I'd suggest
making the ktype value an argument to kobject_init() so that it
_couldn't_ be omitted.
Sounds fine, maybe we should also pass the name along, so it will be
obvious what
Hi all,
Can anyone advice whether there is something similar to inotify in 2.4 kernel?
Need efficient way to track file system changes.
Maybe some other tools, approaches under 2.4?
TIA,
Vitaliy
-
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to
On Thu, Nov 29, 2007 at 12:01:49AM -0800, Pete Zaitcev wrote:
On Thu, 29 Nov 2007 08:44:38 +0100, Oliver Neukum [EMAIL PROTECTED] wrote:
3. Make sure usbcore doesn't probe the devices in the wrong mode with the
option driver
This fixes duplication. And to take it further, why don't we
On Thu, 29 Nov 2007 17:45:57 +0100
Anders Henke [EMAIL PROTECTED] wrote:
On Nov 29 2007, FUJITA Tomonori wrote:
On Thu, 29 Nov 2007 14:03:19 +0100
Jan Kara [EMAIL PROTECTED] wrote:
Adding relevant people and lists to CC...
On Nov 29, 2007 1:58 PM, Robert P. J. Day [EMAIL PROTECTED] wrote:
On Thu, 29 Nov 2007, Alexey Dobriyan wrote:
On 11/29/07, Robert P. J. Day [EMAIL PROTECTED] wrote:
echo '#! /bin/sh' /tmp/modprobe
echo 'echo $@ /tmp/modprobe.log' /tmp/modprobe
echo 'exec /sbin/modprobe $@'
On Thu, 29 Nov 2007 03:59:54 -0800 (PST) Roland McGrath [EMAIL PROTECTED]
wrote:
+/*
+ * Determines whether a value may be installed in a segment register.
+ */
+#define invalid_selector(value) \
+ ((value) != 0 ((value) SEGMENT_RPL_MASK) != USER_RPL)
This didn't need to be
On Thu, 29 Nov 2007 04:00:14 -0800 (PST) Roland McGrath [EMAIL PROTECTED]
wrote:
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -461,12 +461,13 @@ static int ptrace_set_debugreg(struct task_struct
*child,
void ptrace_disable(struct task_struct *child)
{
On 11/7/07, Tejun Heo [EMAIL PROTECTED] wrote:
Thanks. We're currently trying to find out what's actually going on
with all these drives. At first, drives which got blacklisted aren't
many and made sense (had other problems with NCQ, etc..) but with new
generation drives from many vendors
On 11/28/2007 07:42 PM, Roland McGrath wrote:
--- a/arch/x86/ia32/ptrace32.c
+++ b/arch/x86/ia32/ptrace32.c
@@ -48,19 +48,27 @@ static int putreg32(struct task_struct *child, unsigned
regno, u32 val)
if (val (val 3) != 3)
return -EIO;
On Nov 29, 2007 9:03 AM, Greg KH [EMAIL PROTECTED] wrote:
On Thu, Nov 29, 2007 at 05:53:33PM +0100, Jan Engelhardt wrote:
On Nov 29 2007 08:47, Greg KH wrote:
On Thu, Nov 29, 2007 at 11:36:12AM -0500, Jon Masters wrote:
On Wed, 2007-11-28 at 17:07 -0800, Greg KH wrote:
The easiest
Can we please stop this useless discussion? Trying to check the content
of files to see whether they might be malicious is inherently braindead,
and no amounts of plugins in random places will fix this.
Actually it is quite effective especially for files whose content is
expected not to be
On Thu, Nov 29, 2007 at 04:00:31AM -0800, Roland McGrath wrote:
+#define R32(l,q) \
+ case offsetof(struct user32, regs.l): \
+ regs-q = value; break
+
+#define SEG32(rs)
On Nov 29, 2007 9:11 AM, [EMAIL PROTECTED] wrote:
These are good points. However, on the Slack 10.2 box I repeated these
measurements with all userspace code quiesced. No daemons running except
for those that are kernel threads. Secondly, I do run dynticks kernels on
other Slackware 10.2
On Thu, Nov 29, 2007 at 12:05:36PM -0500, Jon Masters wrote:
On Thu, 2007-11-29 at 08:47 -0800, Greg KH wrote:
On Thu, Nov 29, 2007 at 11:36:12AM -0500, Jon Masters wrote:
On Wed, 2007-11-28 at 17:07 -0800, Greg KH wrote:
The easiest way is as Al described above, just have the
* Jeff Dike [EMAIL PROTECTED] wrote:
On Thu, Nov 29, 2007 at 11:19:40AM +0100, Miklos Szeredi wrote:
date-7119 0 15636591us!: schedule bash-502 (0 0)
bash-502 0 15643908us!: schedule date-7119 (0 0)
bash-502 0 15646250us!: schedule date-7120 (0 0)
How
On Thu, 2007-11-29 at 12:06 -0500, Alan Stern wrote:
On Thu, 29 Nov 2007, Kay Sievers wrote:
In fact, if we were designing the kobject API from scratch, I'd suggest
making the ktype value an argument to kobject_init() so that it
_couldn't_ be omitted.
Sounds fine, maybe we
On Thu, 29 Nov 2007, Kay Sievers wrote:
On Nov 29, 2007 1:58 PM, Robert P. J. Day [EMAIL PROTECTED] wrote:
On Thu, 29 Nov 2007, Alexey Dobriyan wrote:
On 11/29/07, Robert P. J. Day [EMAIL PROTECTED] wrote:
echo '#! /bin/sh' /tmp/modprobe
echo 'echo $@ /tmp/modprobe.log'
On Nov 29, 2007 4:46 PM, Dan Kegel [EMAIL PROTECTED] wrote:
On Nov 29, 2007 7:37 AM, Xavier Bestel [EMAIL PROTECTED] wrote:
One sticking point is that apps like Photoshop and probably
Punkbuster want to retrieve the hard drive's serial number
So they can't be installed on a network
On Wed, Nov 28, 2007 at 04:41:18PM -0800, Roland McGrath wrote:
This generalizes the getreg and putreg functions so they can be used on the
current task, as well as on a task stopped in TASK_TRACED and switched off.
This lays the groundwork to share this code for all kinds of user-mode
101 - 200 of 994 matches
Mail list logo
