On 14/06/2013 06:12, Eric Dumazet wrote:
On Fri, 2013-06-14 at 04:57 +0300, Eliezer Tamir wrote:
Use sched_clock() instead of get_cycles().
We can use sched_clock() because we don't care much about accuracy.
Remove the dependency on X86_TSC
Signed-off-by: Eliezer Tamir
Since for max_load and this_load, they are the value that already be
scaled. It is not reasonble to get a minimum value between the scaled
and non-scaled value, like below example.
min(sds-busiest_load_per_task, sds-max_load);
Also add comment over in what condition, there would be cpu
On Thu, Jun 13, 2013 at 10:33:26PM -0700, Joe Perches wrote:
On Fri, 2013-06-14 at 15:21 +1000, Dave Chinner wrote:
On Thu, Jun 13, 2013 at 07:37:50PM -0700, Joe Perches wrote:
This typedef is unnecessary and should just be removed.
Signed-off-by: Joe Perches j...@perches.com
Here is two patches which correct the scale usage in the fix_small_balance,
and give out comment over when fix_small_imbalance would cause load change.
Lei Wen (2):
sched: reduce calculation effort in fix_small_imbalance
sched: scale the busy and this queue's per-task load before compare
Actually all below item could be repalced by scaled_busy_load_per_task
(sds-busiest_load_per_task * SCHED_POWER_SCALE)
/sds-busiest-sgp-power;
Signed-off-by: Lei Wen lei...@marvell.com
---
kernel/sched/fair.c | 19 ---
1 file changed, 8 insertions(+), 11
Hello,
On 6/12/2013 9:21 PM, Prarit Bhargava wrote:
On 06/11/2013 03:41 AM, Shinya Kuribayashi wrote:
[ 27.857330] hrtimer: interrupt took 0 ns
^^^ see below ...
This may be because the frequency of our tick timer source in this
system is very slow, it's 32768 Hz. I think it's not
On Fri, Jun 14, 2013 at 12:06:51AM +0200, Arnd Bergmann wrote:
On Thursday 13 June 2013 15:43:42 Maxime Ripard wrote:
+
+ ahb@8008 {
+ usb0: usb@8008 {
+ pinctrl-names = default;
+ pinctrl-0 = usb0_otg_cfa10036;
+
Willy Tarreau wrote...
I'm attaching the two patches here to be appled on top of 2.6.32.61, I would
like it if you could try in your environment to confirm that they correctly
fix the issue.
Confirmation: Kernel builds and runs for both Debian squeeze and
wheezy (gcc 4.4 and gcc 4.7) on i386.
On 14/06/13 08:47, Tony Lindgren wrote:
* Kishon Vijay Abraham I kis...@ti.com [130613 22:41]:
Hi,
On Thursday 13 June 2013 06:35 PM, Tomi Valkeinen wrote:
Hi,
On 28/05/13 08:18, Kishon Vijay Abraham I wrote:
Hi Tony,
On Friday 17 May 2013 06:52 PM, Kishon Vijay Abraham I wrote:
In
Hi Christoph,
On Fri, Jun 14, 2013 at 08:23:18AM +0200, Christoph Biedl wrote:
Willy Tarreau wrote...
I'm attaching the two patches here to be appled on top of 2.6.32.61, I would
like it if you could try in your environment to confirm that they correctly
fix the issue.
Confirmation:
On 06/10/2013 07:01 AM, Matthew Garrett wrote:
Windows 8 leaves backlight control up to individual graphics drivers rather
than making ACPI calls itself. There's plenty of evidence to suggest that
the Intel driver for Windows doesn't use the ACPI interface, including the
fact that it's broken
On Fri, Jun 14, 2013 at 02:30:53PM +0800, Shawn Guo wrote:
On Fri, Jun 14, 2013 at 12:06:51AM +0200, Arnd Bergmann wrote:
On Thursday 13 June 2013 15:43:42 Maxime Ripard wrote:
+
+ ahb@8008 {
+ usb0: usb@8008 {
+ pinctrl-names =
On Thu, Jun 13, 2013 at 03:43:41PM +0200, Maxime Ripard wrote:
Brian Lilly (3):
ARM: cfa10049: Switch the chip select pin of the LCD controller
ARM: mxs: dt: Add the Crystalfontz CFA-10055 device tree
ARM: mxs: dt: Add Crystalfontz CFA-10057 device tree
Maxime Ripard (1):
ARM:
Hi Will,
We have tested the patch,
It seems ok in the stability test .
We have merged it into our main branch .
Thanks for your patch !
-Original Message-
From: Will Deacon [mailto:will.dea...@arm.com]
Sent: Monday, June 03, 2013 5:54 PM
To: Wang, Yalin
Cc: 'richard -rw- weinberger';
MD5 key lookups on a given TCP socket were being performed
incorrectly. This fix alters parameter inputs to the MD5
lookup function tcp_md5_do_lookup, which is called by functions
tcp_md5_do_add and tcp_md5_do_del. Specifically, the change now
inputs the correct address and address family required
On Fri, 14 Jun 2013, Sachin Kamat wrote:
Hi Lee,
On 13 June 2013 16:19, Lee Jones lee.jo...@linaro.org wrote:
On Wed, 12 Jun 2013, Sachin Kamat wrote:
devm_* APIs are device managed and make code simpler.
Signed-off-by: Sachin Kamat sachin.ka...@linaro.org
Cc: Miguel Aguilar
On 06/14/2013 07:57 AM, Paul E. McKenney wrote:
On Fri, Jun 14, 2013 at 07:25:57AM +0800, Lai Jiangshan wrote:
On Thu, Jun 13, 2013 at 11:22 PM, Paul E. McKenney
paul...@linux.vnet.ibm.com wrote:
On Thu, Jun 13, 2013 at 10:55:41AM +0800, Lai Jiangshan wrote:
On 06/12/2013 11:40 PM, Paul E.
From: Kishon Vijay Abraham I kis...@ti.com
Added an API of_extcon_get_extcon_dev() to be used by drivers to get
extcon device in the case of dt boot (this can be used instead of
extcon_get_extcon_dev()).
Signed-off-by: Kishon Vijay Abraham I kis...@ti.com
Signed-off-by: Chanwoo Choi
On 10/06/13 14:52, Arnd Bergmann wrote:
On Monday 10 June 2013 10:27:05 Srinivas KANDAGATLA wrote:
+ soc {
+ pin-controller-sbc {
+ #address-cells = 1;
+ #size-cells = 1;
+ compatible = st,stih416-pinctrl,
On 06/13/2013 02:55 PM, Christian Ruppert wrote:
Traditionally, GPIO ranges are based on consecutive ranges of both GPIO
and pin numbers. This patch allows for GPIO ranges with arbitrary lists
of pin numbers.
Signed-off-by: Christian Ruppert christian.rupp...@abilis.com
---
On 06/14/2013 11:11 AM, Jonghwa Lee wrote:
This patch adds NULL pointer checking of extcon device to 'extcon_unregister
_interest' which unregisters extcon notifier block.
Signed-off-by: Jonghwa Lee jonghwa3@samsung.com
Signed-off-by: Myungjoo Ham myungjoo@samsung.com
---
On Fri, 2013-06-14 at 18:56 +1200, Aydin Arik wrote:
MD5 key lookups on a given TCP socket were being performed
incorrectly. This fix alters parameter inputs to the MD5
lookup function tcp_md5_do_lookup, which is called by functions
tcp_md5_do_add and tcp_md5_do_del. Specifically, the change
On 14.06.13 11:15:13, Namhyung Kim wrote:
+int perf_get_persistent_event_fd(unsigned cpu, struct perf_event_attr
*attr)
+{
+ struct pers_event_desc *desc;
+
+ if (cpu = (unsigned)nr_cpu_ids)
+ return -EINVAL;
+
+ list_for_each_entry(desc, per_cpu(pers_events,
On 14.06.13 11:08:40, Namhyung Kim wrote:
- if (perf_evlist__mmap(evlist, opts-mmap_pages, false) 0) {
+try_again2:
+ if (perf_evlist__mmap(evlist, opts-mmap_pages, opts-mmap_ro) 0) {
+ if (!opts-mmap_ro errno == EACCES) {
+ opts-mmap_ro = true;
+
On Tue, Jun 11, 2013 at 8:11 PM, Bin Gao bin@linux.intel.com wrote:
On Sun, Jun 09, 2013 at 10:53:35PM +0300, Andy Shevchenko wrote:
Please, try to avoid top posting in the future emails.
On Fri, Jun 7, 2013 at 12:26 AM, Bin Gao bin@linux.intel.com wrote:
With v4l2, the camera sensor
From: JunweiZhang junwei.zh...@6wind.com
no real problem is fixed, just save a few bytes in
net_namespace structure.
Signed-off-by: JunweiZhang junwei.zh...@6wind.com
Signed-off-by: Nicolas Dichtel nicolas.dich...@6wind.com
---
include/net/net_namespace.h | 2 ++
1 file changed, 2 insertions(+)
From: JunweiZhang junwei.zh...@6wind.com
ip_vs.h is not necessary for sysctl_binary.c.
prepare for the next patch to avoid compile issue.
Signed-off-by: JunweiZhang junwei.zh...@6wind.com
Signed-off-by: Nicolas Dichtel nicolas.dich...@6wind.com
---
kernel/sysctl_binary.c | 1 -
1 file changed,
After commit 839a8e86(writeback: replace custom worker pool implementation
with unbound workqueue), bdi_writeback_workfn runs off bdi_writeback-dwork,
on each execution, it processes bdi-work_list and reschedules if there are
more things to do instead of flush any work that race with us existing.
Transparent huge zero page is used during the page fault instead of
in khugepaged.
# ls /sys/kernel/mm/transparent_hugepage/
defrag enabled khugepaged use_zero_page
# ls /sys/kernel/mm/transparent_hugepage/khugepaged/
alloc_sleep_millisecs defrag full_scans max_ptes_none pages_collapsed
There is just one caller in fs-writeback.c call wb_do_writeback and
current codes unnecessary export it in header file, this patch fix
it by changing wb_do_writeback to static function.
Signed-off-by: Wanpeng Li liw...@linux.vnet.ibm.com
---
fs/fs-writeback.c | 2 +-
The old codes accumulate addr to get right pmd, however,
currently pmds are preallocated and transfered as a parameter,
there is unnecessary to accumulate addr variable any more, this
patch remove it.
Signed-off-by: Wanpeng Li liw...@linux.vnet.ibm.com
---
arch/x86/mm/pgtable.c | 4 +---
1
There is a blank in show_free_areas which lead to dump messages aren't
aligned. This patch remove blank.
Before patch:
[155219.720141] active_anon:50675 inactive_anon:35273 isolated_anon:0
[155219.720141] active_file:215421 inactive_file:344268 isolated_file:0
[155219.720141] unevictable:0
The default zonelist order selecter will select node order if any node's
DMA zone comprises greater than 70% of its local memory instead of 60%,
according to default_zonelist_order::low_kmem_size total * 70/100.
Signed-off-by: Wanpeng Li liw...@linux.vnet.ibm.com
---
Documentation/sysctl/vm.txt
wb_reason_name is not used any more, this patch remove it.
Signed-off-by: Wanpeng Li liw...@linux.vnet.ibm.com
---
include/linux/writeback.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index e27468e..8b5cec4 100644
---
* Tomi Valkeinen tomi.valkei...@ti.com [130613 23:42]:
On 14/06/13 08:47, Tony Lindgren wrote:
* Kishon Vijay Abraham I kis...@ti.com [130613 22:41]:
Hi,
On Thursday 13 June 2013 06:35 PM, Tomi Valkeinen wrote:
Hi,
On 28/05/13 08:18, Kishon Vijay Abraham I wrote:
Hi Tony,
On
After commit 839a8e86(writeback: replace custom worker pool implementation
with unbound workqueue), there is no bdi forker thread any more. This patch
rename WB_REASON_FORKER_THREAD to WB_REASON_WORKER_THREAD since works are
done by emergency worker.
Signed-off-by: Wanpeng Li
On Thu, Jun 13, 2013 at 08:55:33PM -0700, Guenter Roeck wrote:
[...]
Signed-off-by: Johannes Thumshirn johannes.thumsh...@men.de
Almost good. One comment below.
Thanks,
Guenter
Nice to hear. Thanks for the review by the way.
[...]
+
+ drv-num_gpios = of_gpio_count(node);
+ if
This commit adds boost frequency support in cpufreq core (Hardware
Software).
Some SoC (like Exynos4 - e.g. 4x12) allow setting frequency above
its normal operation limits. Such a mode shall be only used for a short
time.
Overclocking (boost) support is essentially provided by platform
dependent
The Intel's hardware based boost solution driver has been changed to cooperate
with
common cpufreq boost framework.
The global sysfs boost attribute entry code
(/sys/devices/system/cpu/cpufreq/boost)
has been moved to a core cpufreq code. This attribute is now only visible,
when cpufreq driver
The struct cpufreq_driver has been extended to embrace the information
related to boost support.
When boost_mode device tree attribute is defined for a platform, the
boost_supported flag is set. Moreover boost related attributes were
exported.
Signed-off-by: Lukasz Majewski
This patch series introduces support for CPU overclocking technique
called Boost.
It is a follow up of a LAB governor proposal. Boost is a LAB component:
http://thread.gmane.org/gmane.linux.kernel/1484746/match=cpufreq
Boost unifies hardware based solution (e.g. Intel Nehalem) with
software
On 6/13/2013 10:03 AM, Sujit Reddy Thumma wrote:
static struct scsi_host_template ufshcd_driver_template = {
@@ -1771,8 +2064,8 @@ int ufshcd_init(struct device *dev, struct
ufs_hba **hba_handle,
/* Configure LRB */
ufshcd_host_memory_configure(hba);
- host-can_queue =
Hello,
on my 64bit kernel / 32 bit userspace system with libnuma 2.0.8 i get this
error on linux 3.9.6:
bench/numa.c: In function ‘worker_thread’:
bench/numa.c:1113:20: error: comparison between signed and unsigned integer
expressions [-Werror=sign-compare]
bench/numa.c:1161:6: error: format
On Thursday 13 June 2013 11:49:17 Scott Wood wrote:
On 06/13/2013 02:21:24 AM, Rojhalat Ibrahim wrote:
On Wednesday 12 June 2013 16:50:26 Scott Wood wrote:
On 06/12/2013 03:19:30 AM, Rojhalat Ibrahim wrote:
On Tuesday 11 June 2013 12:28:59 Scott Wood wrote:
Yes, I figured it was
I've been working with device passthrough irq
on armv7 after disassociating the device from guest
free_irq() is executed on host. Display of /proc/interrupts
still shows the IRQ info with no irq name associated,
and there is no irq_action associated with the IRQ.
'show_interrupts()' in
We have an unpleasant HPFS (at least) race with read(2) vs. unlink(2)
The thing is, HPFS and several other filesystems keep track of all opened
struct file for directory and update the position in it upon directory
modifications. For HPFS it's particulary painful, since it encodes the
Hi Laurent,
Am Freitag, 14. Juni 2013, 02:27:01 schrieb Laurent Pinchart:
Hi Heiko,
Thank you for the patch. I've tested it on an sh73a0 KZM9G board with the
sh- pfc driver and it seems to work fine. Please see the code below for
comments.
On Monday 10 June 2013 21:40:29 Heiko Stübner
--
hallo,
Haben Sie ein Darlehen, Rechnungen zu bezahlen oder Ihr eigenes
Unternehmen gründen möchten, können Sie für ein Darlehen bewerben Sie
sich jetzt und kontaktieren Sie uns via E-mail:
willsrichardloancompan...@yahoo.co.uk
Kreditantrag
Name:
Adresse:
Tel:
Alter:
Beruf:
On 14/06/13 10:33, Tony Lindgren wrote:
If we want to fix something this late in the merge window, the patches
must have a clear description what caused the regression and what happens
without the patches. These patches don't have that. And they are marked
RFC also. So actually I'm not
On Thursday, June 13, 2013 11:14 PM, Arnd Bergmann wrote:
On Thursday 13 June 2013 22:22:31 Jingoo Han wrote:
+struct pcie_port_info {
+ u32 cfg0_size;
+ u32 cfg1_size;
+ u32 io_size;
+ u32 mem_size;
+ phys_addr_t
On 14 June 2013 12:36, Lee Jones lee.jo...@linaro.org wrote:
On Fri, 14 Jun 2013, Sachin Kamat wrote:
Hi Lee,
On 13 June 2013 16:19, Lee Jones lee.jo...@linaro.org wrote:
On Wed, 12 Jun 2013, Sachin Kamat wrote:
devm_* APIs are device managed and make code simpler.
Signed-off-by:
On Fri, Jun 14, 2013 at 12:19:43AM +0100, Grant Likely wrote:
The MIPS interrupt controllers are all registering their own irq_domains
now. Drop the MIPS specific code because it is no longer needed.
Signed-off-by: Grant Likely grant.lik...@linaro.org
Cc: Ralf Baechle r...@linux-mips.org
On 06/12/2013 07:16 PM, Steven Rostedt wrote:
On Wed, 2013-06-12 at 12:22 -0400, Steven Rostedt wrote:
# sudo trace-cmd record -e brcmfmac:brcmf_dbg -f 'level 0x4'
disable all
enable brcmfmac:brcmf_dbg
path = /sys/kernel/debug/tracing/events/brcmfmac/brcmf_dbg/enable
(level 0x4)
^
The comment introduced with the recently added pinctrl_gpio_range.pins
element was wrong. This corrects it.
Thanks to Patrice Chotard for pointing this out.
Signed-off-by: Christian Ruppert christian.rupp...@abilis.com
---
include/linux/pinctrl/pinctrl.h |2 +-
1 files changed, 1
Wanpeng Li wrote:
Transparent huge zero page is used during the page fault instead of
in khugepaged.
# ls /sys/kernel/mm/transparent_hugepage/
defrag enabled khugepaged use_zero_page
# ls /sys/kernel/mm/transparent_hugepage/khugepaged/
alloc_sleep_millisecs defrag full_scans
On Fri, Jun 14, 2013 at 4:19 AM, Stephen Warren swar...@wwwdotorg.org wrote:
On 06/13/2013 03:12 AM, Alexandre Courbot wrote:
Add basic support for booting secondary processors on Tegra devices
using the Trusted Foundations secure monitor.
Signed-off-by: Alexandre Courbot acour...@nvidia.com
On Fri, Jun 14, 2013 at 9:22 AM, Ralf Baechle r...@linux-mips.org wrote:
On Fri, Jun 14, 2013 at 12:19:43AM +0100, Grant Likely wrote:
The MIPS interrupt controllers are all registering their own irq_domains
now. Drop the MIPS specific code because it is no longer needed.
Signed-off-by:
Hi,
On Friday 14 June 2013 12:45 PM, Chanwoo Choi wrote:
From: Kishon Vijay Abraham I kis...@ti.com
Added an API of_extcon_get_extcon_dev() to be used by drivers to get
extcon device in the case of dt boot (this can be used instead of
extcon_get_extcon_dev()).
Signed-off-by: Kishon Vijay
devm_* APIs are device managed and make code simpler.
Signed-off-by: Sachin Kamat sachin.ka...@linaro.org
Cc: Miguel Aguilar miguel.agui...@ridgerun.com
---
Patch is based on mfd-next tree and compile tested.
This driver gives following compilation error (not introduced by this patch):
On Thu, Jun 13, 2013 at 11:35 PM, Dave Martin dave.mar...@arm.com wrote:
diff --git a/Documentation/devicetree/bindings/arm/tegra.txt
b/Documentation/devicetree/bindings/arm/tegra.txt
index ed9c853..d59bc19 100644
--- a/Documentation/devicetree/bindings/arm/tegra.txt
+++
On Fri, Jun 14, 2013 at 4:21 AM, Stephen Warren swar...@wwwdotorg.org wrote:
On 06/13/2013 03:12 AM, Alexandre Courbot wrote:
Not all Tegra devices need to set the CPU reset handler in the same way.
s/need/can/ ?
Fixed, thanks!
Alex.
--
To unsubscribe from this list: send the line unsubscribe
* Stephen Warren swar...@wwwdotorg.org [130613 12:37]:
On 06/12/2013 12:33 PM, Tony Lindgren wrote:
* Linus Walleij linus.wall...@linaro.org [130611 12:59]:
On Tue, Jun 11, 2013 at 6:33 PM, Stephen Warren swar...@wwwdotorg.org
wrote:
On 06/11/2013 02:16 AM, Linus Walleij wrote:
From:
Gcc 4.3 doesn't understand binary constants (0b*):
sound/soc/codecs/si476x.c:172:8: error: invalid suffix b110 on integer
constant
sound/soc/codecs/si476x.c:219:9: error: invalid suffix b111 on integer
constant
sound/soc/codecs/si476x.c:219:56: error: invalid suffix b111 on integer
On 06/14/2013 05:36 PM, Kishon Vijay Abraham I wrote:
Hi,
On Friday 14 June 2013 12:45 PM, Chanwoo Choi wrote:
From: Kishon Vijay Abraham I kis...@ti.com
Added an API of_extcon_get_extcon_dev() to be used by drivers to get
extcon device in the case of dt boot (this can be used instead of
On Fri, Jun 14, 2013 at 4:23 AM, Stephen Warren swar...@wwwdotorg.org wrote:
On 06/13/2013 03:12 AM, Alexandre Courbot wrote:
Use a firmware operation to set the CPU reset handler and only resort to
doing it ourselves if there is none defined.
This supports the booting of secondary CPUs on
On 14.06.13 11:36:00, Namhyung Kim wrote:
+static int pers_event_sysfs_register(struct pers_event *event)
+{
+ struct device_attribute *attr = event-sysfs.attr;
+ int idx;
+
+ *attr = (struct device_attribute)__ATTR(, 0444, pers_event_sysfs_show,
+
These look okay. Feel free to add my Acked-by. I presume they can't become
const also?
David
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please
On Fri 14-06-13 15:30:34, Wanpeng Li wrote:
There is just one caller in fs-writeback.c call wb_do_writeback and
current codes unnecessary export it in header file, this patch fix
it by changing wb_do_writeback to static function.
So what?
Besides that git grep wb_do_writeback tells that
Commit 50d8f87d2b3 (powerpc/fsl-pci Make PCIe hotplug work with Freescale
PCIe controllers) does not handle non-PCIe controllers properly, which causes
a panic during boot for certain configurations.
This patch fixes the issue by calling setup_indirect_pci for all device types.
On Thu, Jun 13, 2013 at 03:38:09PM -0600, Stephen Warren wrote:
On 06/13/2013 06:55 AM, Christian Ruppert wrote:
This patch adds the infrastructure required to register non-linear gpio
ranges through gpiolib and the standard GPIO device tree bindings.
That's not exactly true. The existing
On Mon, Jun 10, 2013 at 4:35 PM, Arnd Bergmann a...@arndb.de wrote:
__initdata = {
.virtual= (unsigned long)AXI_VIRT_BASE,
.length = AXI_PHYS_SIZE,
.type = MT_DEVICE,
- },
+ }, {
+ .pfn=
On Thu, Jun 13, 2013 at 06:25:49PM +0800, Fengguang Wu wrote:
Greetings,
I got the below dmesg in linux-next and the first bad commit is
Thanks Fengguang.
Can you try the following please? I do not see the same issue
unfortunately but I am the wrong type of unlucky here.
---8---
mm: Clear
Am Freitag, 14. Juni 2013, 01:53:49 schrieb Laurent Pinchart:
Hi Linus,
On Thursday 13 June 2013 17:36:00 Linus Walleij wrote:
On Thu, Jun 13, 2013 at 5:23 PM, Heiko Stübner he...@sntech.de wrote:
Ok, I'll see that I get this fixed :-)
Hmm ... what is the meaning of the argument of
Hi,
On Friday 14 June 2013 01:47 PM, Tomi Valkeinen wrote:
On 14/06/13 10:33, Tony Lindgren wrote:
If we want to fix something this late in the merge window, the patches
must have a clear description what caused the regression and what happens
without the patches. These patches don't have
Michal Hocko wrote:
On Fri 14-06-13 15:30:34, Wanpeng Li wrote:
There is just one caller in fs-writeback.c call wb_do_writeback and
current codes unnecessary export it in header file, this patch fix
it by changing wb_do_writeback to static function.
So what?
Besides that git grep
On Thu 13-06-13 13:34:46, David Rientjes wrote:
On Thu, 13 Jun 2013, Michal Hocko wrote:
Right now it appears that that number of users is 0 and we're talking
about a problem that was reported in 3.2 that was released a year and a
half ago. The rules of inclusion in stable also
On Fri, Jun 14, 2013 at 03:30:34PM +0800, Wanpeng Li wrote:
There is just one caller in fs-writeback.c call wb_do_writeback and
current codes unnecessary export it in header file, this patch fix
it by changing wb_do_writeback to static function.
Signed-off-by: Wanpeng Li
Commit 106c992a5ebef28193cf5958e49ceff5e4aebb04 (mm/hugetlb: add more
arch-defined huge_pte functions) merged in v3.10-rc1.
The above commit added an include of asm-generic/hugetlb.h to each
architecture's asm/hugetlb.h (except s390). Unfortunately metag was
missed which resulted in build errors
On Fri 14-06-13 12:29:52, Kirill A. Shutemov wrote:
Michal Hocko wrote:
On Fri 14-06-13 15:30:34, Wanpeng Li wrote:
There is just one caller in fs-writeback.c call wb_do_writeback and
current codes unnecessary export it in header file, this patch fix
it by changing wb_do_writeback to
To support DT booting of da850 EVM, davinci gpio driver converted to platform
driver. Also when here, start using gpiolib API for gpio get/set
functionalities.
Hence removing gpio inline functionalities. However usage of gpiolib API will
cause an additional software latencies.
In this patch
Make some minor coding style fixes. Use proper multi-line
commenting style, arrange include files alphabetically use
macros for bit definitions.
Signed-off-by: Philip Avinash avinashphi...@ti.com
Signed-off-by: Sekhar Nori nsek...@ti.com
---
Changes since v1:
- Remove variable name
From: KV Sujith sujit...@ti.com
gpio controller resource information being associated with
davinci_soc_info structure and not created any device. Hence davinci
gpio didn't fall under proper device model. This patch creates gpio
davinci as a platform device for da8xx platforms.
- Add Memory and
From: KV Sujith sujit...@ti.com
Modify GPIO Davinci driver to be compliant to standard platform drivers.
The driver did not have platform driver structure or a probe. Instead,
had a davinci_gpio_setup() function which is called in the pure_init
sequence. The function also had dependency on
Remove NEED_MACH_GPIO_H config select option for ARCH_DAVINCI to start
use gpiolib interface for davinci platforms. However with this software
latencies for gpio_get/set APIs will affect. Latency has increased by 18
microsecond with gpiolib API as compared with inline API's.
Software latency is
Sender mail id got corrupted. I will send another.
Thanks
Avinash
On Fri, Jun 14, 2013 at 15:04:34, y...@symphony.india.ext.ti.com wrote:
From: Philip Avinash avinashphi...@ti.com
To support DT booting of da850 EVM, davinci gpio driver converted to platform
driver. Also when here, start
Create davinci gpio device and remove references in davinci_soc_info
structure. Also rearrange header file inclusion in group basis.
Signed-off-by: Philip Avinash avinashphi...@ti.com
Acked-by: Linus Walleij linus.wall...@linaro.org
Signed-off-by: Sekhar Nori nsek...@ti.com
---
Create davinci gpio device and remove gpio references in
davinci_soc_info structure for dmxxx platforms. Also add Memory and IRQ
resources for GPIO platform device.
Signed-off-by: Philip Avinash avinashphi...@ti.com
Acked-by: Linus Walleij linus.wall...@linaro.org
Signed-off-by: Sekhar Nori
gpio controller resource information being associated with
davinci_soc_info structure and not created any device. Hence davinci
gpio didn't fall under proper device model. This patch creates gpio
davinci as a platform device for dmxxx platforms.
Also add daivinci_register_gpio API to create
On 06/14/2013 05:31 PM, Michal Hocko wrote:
On Fri 14-06-13 12:29:52, Kirill A. Shutemov wrote:
Michal Hocko wrote:
On Fri 14-06-13 15:30:34, Wanpeng Li wrote:
There is just one caller in fs-writeback.c call wb_do_writeback and
current codes unnecessary export it in header file, this patch
Any comment or feedback for this patch?
On Fri, 2013-05-24 at 17:36 +0800, Ley Foon Tan wrote:
This patch adds address translation to fdt. It is needed when the early
console is connected to a simple-bus (bridge) that has address translation
enabled.
Walter Goossens have submitted first
On Wed, Jun 12, 2013 at 10:50:35PM +0100, Uwe Kleine-K??nig wrote:
This interrupt controller is found on Cortex-M3 and Cortex-M4 machines.
Support for this controller appeared in Catalin's Cortex tree based on
2.6.33 but was nearly completely rewritten.
Signed-off-by: Catalin Marinas
With conversion of GPIO davinci driver to platform driver, gpio-davinci driver
can support DT boot.
This patch series
- adds dt binding support for gpio-davinci.
- da850 dt support goio.
This patch series is based on Linux 3.10-rc4 and is availabel at [1].
1.
On Fri, Jun 14, 2013 at 10:16:55AM +0100, Mel Gorman wrote:
On Thu, Jun 13, 2013 at 06:25:49PM +0800, Fengguang Wu wrote:
Greetings,
I got the below dmesg in linux-next and the first bad commit is
Thanks Fengguang.
Can you try the following please? I do not see the same issue
Replace /include/ by #include for da850 device tree files, in order to
use the C pre-processor, making use of #define features possible.
Signed-off-by: Philip Avinash avinashphi...@ti.com
---
Changes since v1:
- New patch and comes as a dependency of patch 3/4
From: KV Sujith sujit...@ti.com
Add DT entries for Davinci GPIO.
Signed-off-by: KV Sujith sujit...@ti.com
Signed-off-by: Philip Avinash avinashphi...@ti.com
---
Changes since v1:
- interrupts member defined as array and with interrupt flags
arch/arm/boot/dts/da850.dtsi | 15
From: KV Sujith sujit...@ti.com
- Add GPIO DT Data and pinmux for DA850 EVM. GPIO is configurable differently
on different boards. So add GPIO pinmuxing in dts file.
- Dependency: This patch is dependent on Grab-pin-control patch;
https://patchwork.kernel.org/patch/2013751/
Signed-off-by: KV
In struct snd_soc_card zylonite .owner is assigned THIS_MODULE
twice, remove one of them.
Signed-off-by: Emil Goode emilgo...@gmail.com
---
sound/soc/pxa/zylonite.c |1 -
1 file changed, 1 deletion(-)
diff --git a/sound/soc/pxa/zylonite.c b/sound/soc/pxa/zylonite.c
index ceb6566..db8aadf
ehci-omap needs NOP_USB_XCEIV PHY driver to function
properly, so select it. As the USB PHY drivers no longer
depend on USB_PHY, it is safe to select the PHY drivers.
Signed-off-by: Roger Quadros rog...@ti.com
Tested-by: Adrien Vergé adrienve...@gmail.com
---
drivers/usb/host/Kconfig |4 +---
Convert PHY Drivers from menuconfig to menu so that the PHY drivers
can be explicitely selected by the controller drivers.
USB_PHY is no longer a user visible option. It is upto to the PHY
drivers to select it if needed. This patch does so for the existing
PHY drivers that use the USB_PHY
Hi,
Improve Kconfig so that the relevant PHY driver can be explicitely
selected by the controller driver instead of relying on the user
to do so.
Detailed description in patch 1.
v3:
- Fix linking problem when CONFIG_USB is m
v2:
- Merge patches 3-5 into the first patch to prevent circular
1 - 100 of 1176 matches
Mail list logo
