For purpose of adding testing HW we would like
to get rid of pci dependency in generic mei code
This patch provides only straight forward changes
FW status and prob quirks need to be handled separately
Signed-off-by: Tomas Winkler
---
drivers/misc/mei/amthif.c| 68
fixed sparse warning: incompatible types in comparison expression
(different address spaces)
wolw and reg both are being used only for the initialization of
the __iomem area.
Signed-off-by: Sudip Mukherjee
---
drivers/staging/et131x/et131x.c | 4 ++--
1 file changed,
Setting of hw_ops and device has should be in
mei_device_init.
We add reference to the parent device and remove
pci dependent cfg
Signed-off-by: Tomas Winkler
Signed-off-by: Alexander Usyskin
---
drivers/misc/mei/hw-me.c | 6 ++
drivers/misc/mei/hw-txe.c | 5 ++---
Remove inclusion of linux/pci.h in mei layer
however we need to include the headers that before
got included implicitly from linux/pci.h.
Signed-off-by: Tomas Winkler
---
drivers/misc/mei/amthif.c| 2 +-
drivers/misc/mei/bus.c | 1 -
drivers/misc/mei/client.c| 2 +-
fw status retrieval has pci specific implementation
so we push it back to the hw layer
Signed-off-by: Tomas Winkler
---
drivers/misc/mei/hw-me.c | 28
drivers/misc/mei/hw-txe.c | 30 ++
drivers/misc/mei/init.c| 21
For purpose of adding testing HW we would like
to get rid of pci dependency in generic mei code.
Signed-off-by: Tomas Winkler
---
drivers/misc/mei/hw-me.c | 3 +--
drivers/misc/mei/hw-txe.c | 3 +--
drivers/misc/mei/mei_dev.h | 2 --
drivers/misc/mei/pci-me.c | 2 +-
> Do you have example how to acces of_ from i2c driver?
>
> Platform drivers do:
>
> if (pdev->dev.of_node) {
As I said, this is basically the same. Just use the node from the
client's device. Nothing special here.
signature.asc
Description: Digital signature
In order to support testing hw module we remove dependency on
pci from mei module
Tomas Winkler (6):
mei: push all standard settings into mei_device_init
mei: get rid of most of the pci dependencies in mei
mei: move fw_status back to hw ops handlers
mei: remove the reference to pdev from
From: Todd Poynor
usb: phy: Temporarily hold wakeupsource on charger connect and disconnect
events
Allow other parts of the system to react to the charger connect/disconnect
event without allowing the system to suspend before the other parts can process
the event. This wakeup_source times out
From: Todd Poynor
usb: phy: Hold wakeupsource when USB is enumerated in peripheral mode
Purpose of this is to prevent the system to enter into suspend state from USB
peripheral traffic by hodling a wakeupsource when USB is connected and
enumerated in peripheral mode(say adb).
Disabled by
On 28/08/14 16:01, Russell King - ARM Linux wrote:
> On Tue, Aug 19, 2014 at 07:12:07PM +0100, Daniel Thompson wrote:
>> On 19/08/14 18:37, Russell King - ARM Linux wrote:
>>> On Tue, Aug 19, 2014 at 05:45:53PM +0100, Daniel Thompson wrote:
+int register_fiq_nmi_notifier(struct notifier_block
On 01.09.2014 19:35, Marc Zyngier wrote:
On 01/09/14 15:57, Hanjun Guo wrote:
From: Tomasz Nowicki
ACPI kernel uses MADT table for proper GIC initialization. It needs to
parse GIC related subtables, collect CPU interface and distributor
addresses and call driver initialization function (which
On Tue, 02 Sep 2014, ville.syrj...@linux.intel.com wrote:
> From: Ville Syrjälä
>
> When intel_tv_detect() fails to do load detection it would forget to
> drop the locks and clean up the acquire context. Fix it up.
>
> This is a regression from:
> commit 208bf9fdcd3575aa4a5d48b3e0295f7cdaf6fc44
On Sat, Aug 23, 2014 at 02:00:52AM +0800, Addy Ke wrote:
> In rk3x SOC, the I2C controller can receive/transmit up to 32 bytes data
> in one chunk, so the size of data to be write/read to/from TXDATAx/RXDATAx
> must be less than or equal 32 bytes at a time.
>
> Tested on rk3288-pinky board, elan
On Tue, Sep 02, 2014 at 12:03:11PM +0100, Daniel Thompson wrote:
> On 28/08/14 17:15, Paul E. McKenney wrote:
> > On Thu, Aug 28, 2014 at 04:54:25PM +0100, Daniel Thompson wrote:
> >> On 28/08/14 16:01, Russell King - ARM Linux wrote:
> >>> There's concerns with whether either printk() in
[...]
> +static int mtk8250_probe_of(struct platform_device *pdev, struct uart_port
> *p,
> +struct mtk8250_data *data)
> +{
> + int err;
> + struct device_node *np = pdev->dev.of_node;
> +
> + data->clk = of_clk_get(np, 0);
> + if (IS_ERR(data->clk)) {
>
The leon_dma_ops struct is needed for leon regardless of PCI configuration.
Signed-off-by: Andreas Larsson
---
arch/sparc/include/asm/dma-mapping.h |6 --
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/sparc/include/asm/dma-mapping.h
On 09/02/2014 02:09 PM, Jean-Francois Moine wrote:
On Tue, 02 Sep 2014 16:12:40 +0530
Varka Bhadram wrote:
+ switch (((np == bitclkmaster) << 4) | (np == framemaster)) {
+ case 0x11:
+ return SND_SOC_DAIFMT_CBS_CFS;
+ case 0x10:
+ return
On Tue, Aug 12, 2014 at 03:12:17PM +0100, Matthias Brugger wrote:
> This patch adds the devicetree documentation for the Mediatek UART.
>
> Signed-off-by: Matthias Brugger
> ---
> .../devicetree/bindings/serial/mtk-uart.txt| 20
>
> 1 file changed, 20
On 2 September 2014 21:03, Theodore Ts'o wrote:
> On Tue, Sep 02, 2014 at 02:15:39PM +1000, Dave Airlie wrote:
>> On 2 September 2014 14:05, Theodore Ts'o wrote:
>> > I recently upgraded to v3.17-rc3, and on my Lenovo T540p, I can no
>> > longer see the my Dell 30" monitor when it is connected
I see, thanks, I will fix it, I was just worried about the subjects
being too long so I just stuck with the same subject; is there a
character limit on how long the subject line should be? Or as long as
it's reasonable, it'll be fine?
On Tue, Sep 02, 2014 at 12:19:40PM +0300, Dan Carpenter wrote:
Hi Felipe,
Sorry for the delay in replying to this mail, I've been trying to get answers
to the suspend/resume
questions you had.
> > +config USB_DWC3_ST
> > + tristate "STMicroelectronics Platforms"
> > + depends on ARCH_STI && OF
> > + default USB_DWC3_HOST
>
> this seems wrong as
On Sep 2, 2014, at 9:43 AM, Daniel Mack wrote:
> On 09/02/2014 08:32 AM, Klaus Goger wrote:
>> Use the correct register address for Calibration Active and Interrupt
>> Enable
>>
>> Signed-off-by: Klaus Goger
>
> These register definitions are currently unused, but your fix is
> correct. Just
Some quirky PHYs may require to be calibrated post the
hcd initialization.
The USB 3.0 DRD PHY on Exynos5420/5800 systems, coming along
with Synopsys's DWC3 controller, is one such PHY which needs
to be calibrated post xhci's reset at initialization time and
at resume time, to get the controller
The host controller by itself may sometimes need to handle PHY
and/or calibrate some of the PHY settings to get full support out
of the PHY controller. The PHY core provides a calibration
funtionality now to do so.
Therefore, facilitate getting the two possible PHYs, viz.
USB 2.0 type (UTMI+) and
Adding phy calibrate callback, which facilitates setting certain
PHY settings post initialization of the PHY controller.
Exynos5420 and Exynos5800 have 28nm USB 3.0 DRD PHY for which
the Loss-of-Signal (LOS) Detector Threshold Level as well as
Tx-Vboost-Level should be controlled for Super-Speed
Some PHY controllers may need to calibrate certain
PHY settings after initialization of the controller and
sometimes even after initializing the PHY-consumer too.
Add support for the same in order to let consumers do so in need.
Signed-off-by: vivek Gautam
---
drivers/phy/phy-core.c | 36
This series is based on Heikki's patches for simpliefied phy lookup table:
[PATCHv3 0/6] phy: simplified phy lookup [1], applied against 'usb-next' branch
alongwith Sergei's patch for adding generic phy support to usb hcd [2].
NOTE: We need to get above dependencies merged first in order to merge
On 09/02/2014 12:26 PM, Xiubo Li wrote:
Signed-off-by: Xiubo Li
---
sound/soc/generic/simple-card.c | 61 -
1 file changed, 29 insertions(+), 32 deletions(-)
diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c
index
fixed sparse warning : context imbalance in 'do_locked_client_insert'
different lock contexts for basic block
spin_unlock_irqrestore is called at a later stage before returning
from the function if locked is 1.
Signed-off-by: Sudip Mukherjee
---
On Tue, Sep 02, 2014 at 08:47:31AM +0800, Axel Lin wrote:
> The min_sel is 0, max_sel is 15, so n_voltages should be 16.
Applied, thanks.
signature.asc
Description: Digital signature
On Tue, 02 Sep 2014 16:12:40 +0530
Varka Bhadram wrote:
> >>> + switch (((np == bitclkmaster) << 4) | (np == framemaster)) {
> >>> + case 0x11:
> >>> + return SND_SOC_DAIFMT_CBS_CFS;
> >>> + case 0x10:
> >>> + return SND_SOC_DAIFMT_CBS_CFM;
> >>> + case 0x01:
> >>> +
Add XFAIL, XPASS and POSIX 1003.3 std. codes (UNRESOLVED/
UNTESTED/UNSUPPORTED) as a result code. These are
used for the results that test case is expected to fail or
unsupported feature (by config).
This also introduces PASS/FAIL/XFAIL/XPASS/UNSUP/UNTST/UNRES
result codes for each testcase. Since
ftracetest is a collection of testcase shell-scripts for ftrace.
To avoid regressions of ftrace, these testcases check correct
ftrace behaviors. If someone would like to add any features on
ftrace, the patch series should have at least one testcase for
checking the new behavior.
Changes in v3:
-
Add ftrace basic testcases. This just checks ftrace debugfs
interface works as it is designed.
Changes in v2:
- Change shell to sh instead of bash.
Signed-off-by: Masami Hiramatsu
---
tools/testing/ftrace/test.d/basic1.tc |3 +++
tools/testing/ftrace/test.d/basic2.tc |6 ++
Add basic testcases for kprobe dynamic events.
This also shows that the ftracetest accepts sub-directory
for new testcases.
Changes in v2:
- Change shell to sh instead of bash.
Signed-off-by: Masami Hiramatsu
---
.../testing/ftrace/test.d/kprobe/add_and_remove.tc | 11 +++
Hi,
Here is the collection of testcases for ftrace version 3.
This is just some updates and fixes according to the
discussion at previous version.
https://lkml.org/lkml/2014/8/26/304
The major updates are:
- Fix some expressions to work on dash (Thanks Luis!)
- Support
On Tue, Sep 02, 2014 at 02:15:39PM +1000, Dave Airlie wrote:
> On 2 September 2014 14:05, Theodore Ts'o wrote:
> > I recently upgraded to v3.17-rc3, and on my Lenovo T540p, I can no
> > longer see the my Dell 30" monitor when it is connected via the
> > docking station using a Displayport
At Tue, 02 Sep 2014 16:12:40 +0530,
Varka Bhadram wrote:
>
> On 09/02/2014 04:08 PM, Jean-Francois Moine wrote:
> > On Tue, 02 Sep 2014 15:51:41 +0530
> > Varka Bhadram wrote:
> >
> >>> + switch (((np == bitclkmaster) << 4) | (np == framemaster)) {
> >>> + case 0x11:
> >>> + return
On 28/08/14 17:15, Paul E. McKenney wrote:
> On Thu, Aug 28, 2014 at 04:54:25PM +0100, Daniel Thompson wrote:
>> On 28/08/14 16:01, Russell King - ARM Linux wrote:
>>> On Tue, Aug 19, 2014 at 07:12:07PM +0100, Daniel Thompson wrote:
On 19/08/14 18:37, Russell King - ARM Linux wrote:
> On
On 01/09/14 18:34, David Vrabel wrote:
> On 29/08/14 16:17, Stefan Bader wrote:
>>
>> This change might not be the fully correct approach as it basically
>> removes the pre-set page table entry for the fixmap that is compile
>> time set (level2_fixmap_pgt[506]->level1_fixmap_pgt). For one the
>>
On Tue, Sep 02, 2014 at 11:39:08AM +0100, Vivek Gautam wrote:
> Hi,
>
>
> On Fri, Aug 29, 2014 at 12:18 AM, Mark Rutland wrote:
> > On Thu, Aug 28, 2014 at 09:01:56AM +0100, Vivek Gautam wrote:
> >> Exynos7 also has a separate special gate clock going to the IP
> >> apart from the usual AHB
When cgroup_kn_lock_live() is called through some kernfs operation and
another thread is calling cgroup_rmdir(), we may trigger the warning in
cgroup_get().
[ cut here ]
WARNING: CPU: 1 PID: 1228 at kernel/cgroup.c:1034 cgroup_get+0x89/0xa0()
...
Call Trace:
[]
On Tue, Aug 26, 2014 at 09:13:24PM +0200, Simon Lindgren wrote:
> There is a race condition in at91_do_twi_xfer when signals arrive.
> If a signal is recieved while waiting for a transfer to complete
> wait_for_completion_interruptible_timeout() will return -ERESTARTSYS.
> This is not handled
Run these two scripts concurrently:
for ((; ;))
{
mkdir /cgroup/sub
rmdir /cgroup/sub
}
for ((; ;))
{
echo $$ > /cgroup/sub/cgroup.procs
ech $$ > /cgce 6f2e0c38c2108a74 ]---
}
A kernel bug will be triggered:
BUG: unable to handle kernel
Use const char* instead of casting const char* to char*.
Signed-off-by: Irina Tirdea
---
drivers/iio/magnetometer/ak8975.c |8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/iio/magnetometer/ak8975.c
b/drivers/iio/magnetometer/ak8975.c
index a235792..61edc66
When CONFIG_PM_RUNTIME is not defined and bmg160 tries to power
off the device, bmg160_set_power_state will call pm_runtime_put_autosuspend,
which is not implemented (wil return -ENOSYS).
Only call bmg160_set_power_state when CONFIG_PM_RUNTIME is defined.
Signed-off-by: Irina Tirdea
On Mon, Aug 25, 2014 at 04:45:36PM +0200, Jiri Olsa wrote:
> The optimized task context switch for cloned perf events just
> swaps whole perf event contexts (of current and next process)
> if it finds them suitable. Events from the 'current' context
> will now measure data of the 'next' context
Signed-off-by: Erik van Luijk
---
arch/arm/boot/dts/at91sam9g45.dtsi | 7 +++
arch/arm/boot/dts/at91sam9m10g45ek.dts | 3 +++
2 files changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi
b/arch/arm/boot/dts/at91sam9g45.dtsi
index 932a669..bf62c18 100644
---
On 09/01/2014 04:50 PM, Trond Myklebust wrote:
> On Mon, Sep 1, 2014 at 7:32 AM, Shakil A Khan wrote:
>> Signed-off-by : Shakil A Khan
>> ---
>> net/sunrpc/auth_gss/auth_gss.c |2 +-
>> 1 files changed, 1 insertions(+), 1 deletions(-)
>>
>> diff --git a/net/sunrpc/auth_gss/auth_gss.c
Add support for the BMI055 gyroscope sensor. BMI055 is a package
consisting of an acceleration sensor and a gyroscope. This patch
adds support for the gyroscope only.
Spec downloaded from:
http://ae-bst.resource.bosch.com/media/products/dokumente/bmi055/BST-BMI055-DS000-06.pdf
The BMI055
On Mon, Aug 25, 2014 at 04:45:35PM +0200, Jiri Olsa wrote:
> As described in commit:
> 1f9a7268c67f perf: Do not allow optimized switch for non-cloned events
> we dont allow optimized switch for non cloned contexts.
>
> There's no need now to check if one of the context is parent
> of the other
From: Josef Ahmad
This patch adds the PCI id for Intel Quark ILB.
It will be used for GPIO and Multifunction device driver.
Signed-off-by: Josef Ahmad
Acked-by: Bjorn Helgaas
Signed-off-by: Andy Shevchenko
---
include/linux/pci_ids.h | 1 +
1 file changed, 1 insertion(+)
diff --git
On Tue, Sep 02, 2014 at 11:06:30AM +0100, Andre Przywara wrote:
> Hi Rob,
>
> thanks for looking at this.
>
> On 02/09/14 04:06, Rob Herring wrote:
> > On Fri, Aug 29, 2014 at 11:13 AM, Andre Przywara
> > wrote:
> >> The ARM Server Base System Architecture (SBSA) describes a generic
> >> UART
This brings support of the LPC SCH device found on Intel Quark SoC. Patches
were compile tested, and driver runs on actual hardware.
Please, note that PCI ID will be used in future in the gpio-sch driver.
Changelog v2:
- squash patches 1/5 and 2/5 into 1/4
- add Acked-by Bjorn
- address Lee's
This patch refactors the driver to use helper functions instead of
copy'n'pasted pieces of code.
It also introduces an additional struct to hold a chipset info. The chipset
info will be used to store features that are supported by specific processor or
chipset. LPC_SCH supports SMBUS, GPIO and
This patch removes FSF address because it can be changed. While here, update
the copyright lines by adding Intel Corp. to them.
There is no functional change.
Signed-off-by: Andy Shevchenko
---
drivers/mfd/lpc_sch.c | 5 +
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git
Intel Quark X1000 SoC supports IRQ based GPIO. This patch will
enable MFD support for Quark X1000 and provide IRQ resources
to Quark X1000 GPIO device driver.
Signed-off-by: Chang Rebecca Swee Fun
Tested-by: Chang Rebecca Swee Fun
Signed-off-by: Andy Shevchenko
---
drivers/mfd/lpc_sch.c | 37
On 09/02/2014 04:08 PM, Jean-Francois Moine wrote:
On Tue, 02 Sep 2014 15:51:41 +0530
Varka Bhadram wrote:
+ switch (((np == bitclkmaster) << 4) | (np == framemaster)) {
+ case 0x11:
+ return SND_SOC_DAIFMT_CBS_CFS;
+ case 0x10:
+ return
On Tue, 2 Sep 2014 17:26:08 +0800
Xiubo Li wrote:
> @@ -285,11 +287,11 @@ static int asoc_simple_card_dai_link_of(struct
> device_node *node,
> dai_props->codec_dai.sysclk);
>
> /*
> - * soc_bind_dai_link() will check cpu name
> - * after of_node matching if
On Tue, Sep 02, 2014 at 12:14:27PM +0200, leroy christophe wrote:
> Calling 'iptables-compat -L', first time nothing is listed on the screen.
> Second try, it generates following Oops.
I'm going to pass this patch to -stable asap:
commit b88825de8545ad252c31543fef13cadf4de7a2bc
Author: Pablo
On Tue, 2 Sep 2014 17:26:09 +0800
Xiubo Li wrote:
> +Example 4 - many DAI links:
> sound {
> compatible = "simple-audio-card";
> simple-audio-card,name = "Cubox Audio";
> @@ -128,6 +195,7 @@ sound {
> };
> codec {
> sound-dai = < 0>;
On Mon, Sep 01, 2014 at 10:28:13PM +0800, Chen-Yu Tsai wrote:
> The "clock-frequency" DT property is listed as optional, However,
> the current code stores the return value of of_property_read_u32 in
> the return code of mv64xxx_of_config, but then forgets to clear it
> after setting the default
Hi,
On Fri, Aug 29, 2014 at 12:18 AM, Mark Rutland wrote:
> On Thu, Aug 28, 2014 at 09:01:56AM +0100, Vivek Gautam wrote:
>> Exynos7 also has a separate special gate clock going to the IP
>> apart from the usual AHB clock. So add support for the same.
>>
>> Signed-off-by: Vivek Gautam
>> ---
On Tue, 02 Sep 2014 15:51:41 +0530
Varka Bhadram wrote:
> > + switch (((np == bitclkmaster) << 4) | (np == framemaster)) {
> > + case 0x11:
> > + return SND_SOC_DAIFMT_CBS_CFS;
> > + case 0x10:
> > + return SND_SOC_DAIFMT_CBS_CFM;
> > + case 0x01:
> > +
On Mon, Sep 01, 2014 at 08:51:36AM -0700, Srinivas Pandruvada wrote:
> On Mon, 2014-09-01 at 08:36 -0700, Joe Perches wrote:
> > On Mon, 2014-09-01 at 12:11 +0300, Laurentiu Palcu wrote:
> > > The following chips are either similar or have only the resolution
> > > different. Hence, change this
Hello, Arend.
On 01/09/14 16:08, Arend van Spriel wrote:
Maybe it would be better to use the DMA-API instead of the PCI wrappers.
I just found out that the PCI wrappers were indeed removed from the
DMA-API.txt documentation back in 2010, saying that "driver writers are
always able to use
On Tue, Sep 02, 2014 at 12:03:42PM +0800, Jason Wang wrote:
> On 09/01/2014 06:19 PM, Peter Zijlstra wrote:
> > OK I suppose that more or less makes sense, the contextual behaviour is
> > of course tedious in that it makes behaviour less predictable. The
> > 'other' tasks might not want to
On 09/02/2014 02:56 PM, Xiubo Li wrote:
Signed-off-by: Xiubo Li
---
sound/soc/generic/simple-card.c | 61 -
1 file changed, 29 insertions(+), 32 deletions(-)
diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c
index
On Tue, Sep 02, 2014 at 11:08:32AM +0200, Antoine Tenart wrote:
> Hi,
>
> On Mon, Sep 01, 2014 at 09:13:43AM +0800, Peter Chen wrote:
> > On Fri, Aug 29, 2014 at 04:25:35PM +0200, Antoine Tenart wrote:
> > > On Tue, Aug 26, 2014 at 06:22:40PM +0800, Peter Chen wrote:
> > > > On Fri, Aug 22, 2014
And comment and advice are welcome.
Change in v2:
- Maintian compatibility with the old DTs.
Change in v1:
- Add simple-card dts node patches.
- Fix format parsing bug from Jean-Francois's comment.
- Rebase to Kuninori-san's newest changes in next branch.
Xiubo Li (4):
ASoC: simple-card:
This patch will split the DT node into old style and new style:
The new style will merge the single DAI link and muti DAI links code
together, the new style will be easier to add muti DAI links from old
single DAI link DTs.
This patch will maintian compatibility with the old DTs.
Signed-off-by:
This update patch will split the DT node into old style and new style:
The new style will will be easier to add muti DAI links from old single
DAI link DTs.
This patch will maintian compatibility with the old DTs.
Signed-off-by: Xiubo Li
---
.../devicetree/bindings/sound/simple-card.txt |
Signed-off-by: Xiubo Li
---
sound/soc/generic/simple-card.c | 48 -
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c
index 667fa49..e6976a0 100644
---
Signed-off-by: Xiubo Li
---
sound/soc/generic/simple-card.c | 61 -
1 file changed, 29 insertions(+), 32 deletions(-)
diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c
index 986d2c7..cad2b30 100644
---
Calling 'iptables-compat -L', first time nothing is listed on the screen.
Second try, it generates following Oops.
See below the console dump and the disassembled code around the failing
address
root@vgoip:~# /usr/local/sbin/iptables-compat -L
root@vgoip:~# /usr/local/sbin/iptables-compat -L
2014-08-12 16:12 GMT+02:00 Matthias Brugger :
> This patch set adds support for the UART found in Mediatek SoCs.
> The chip is a changed version of a 8250 controller.
> Especially it introduces a new register called highspeed. The value
> in this register has to be set depending on the baudrate.
On Di, 2014-09-02 at 10:29 +0200, Sabrina Dubroca wrote:
> Calling setsockopt with IPV6_JOIN_ANYCAST or IPV6_LEAVE_ANYCAST
> triggers the assertion in addrconf_join_solict()/addrconf_leave_solict()
>
> ipv6_sock_ac_join(), ipv6_sock_ac_drop(), ipv6_sock_ac_close() need to
> take RTNL before
Hi Rob,
thanks for looking at this.
On 02/09/14 04:06, Rob Herring wrote:
> On Fri, Aug 29, 2014 at 11:13 AM, Andre Przywara
> wrote:
>> The ARM Server Base System Architecture (SBSA) describes a generic
>> UART which all compliant level 1 systems should implement. This is
>> actually a PL011
From: Ville Syrjälä
When intel_tv_detect() fails to do load detection it would forget to
drop the locks and clean up the acquire context. Fix it up.
This is a regression from:
commit 208bf9fdcd3575aa4a5d48b3e0295f7cdaf6fc44
Author: Ville Syrjälä
Date: Mon Aug 11 13:15:35 2014 +0300
On Tue, Sep 02, 2014 at 11:40:16AM +0200, Peter Zijlstra wrote:
> On Mon, Sep 01, 2014 at 09:04:38PM +0200, Peter Zijlstra wrote:
> > On Mon, Sep 01, 2014 at 09:46:42AM -0700, Guenter Roeck wrote:
> > > Yes, the problem is still seen in next-140829. See qemu test results at
> > >
If the hw doesn't have a valid MAC address, give a random one and
set it to the hw.
Signed-off-by: Hayes Wang
---
drivers/net/usb/r8152.c | 39 ---
1 file changed, 24 insertions(+), 15 deletions(-)
diff --git a/drivers/net/usb/r8152.c
Exchange the location of rtl8152_set_mac_address() and
set_ethernet_addr(). Then, the set_ethernet_addr() could
set the MAC address by calling rtl8152_set_mac_address()
later.
Signed-off-by: Hayes Wang
---
drivers/net/usb/r8152.c | 34 +-
1 file changed, 17
If the interface has invalid MAC address, it couldn't
be used. In order to let it work normally, give a
random one.
Hayes Wang (2):
r8152: change the location of rtl8152_set_mac_address
r8152: use eth_hw_addr_random
drivers/net/usb/r8152.c | 65
Hi,
On Monday, September 01, 2014 09:36:39 PM Rob Herring wrote:
> On Mon, Sep 1, 2014 at 10:39 AM, Bartlomiej Zolnierkiewicz
> wrote:
> > Calxeda 1G/10G XGMAC Ethernet support should be available only on
> > Calxeda ECX-1000/2000 (Highbank/Midway) platforms.
> >
> > Signed-off-by: Bartlomiej
On Tue, Sep 02, 2014 at 08:39:56AM +0300, Adrian Hunter wrote:
SNIP
> >>> -e intel_pt/tsc=1,noretcomp=0/
> >>>
> >>> I guess I wanted to hear more elaboration why is this better
> >>> than the current way we have by defining an alias, like:
> >>>
> >>> krava alias: "tsc=1,noretcomp=0"
> >>>
On Mon, Sep 01, 2014 at 09:04:38PM +0200, Peter Zijlstra wrote:
> On Mon, Sep 01, 2014 at 09:46:42AM -0700, Guenter Roeck wrote:
> > Yes, the problem is still seen in next-140829. See qemu test results at
> > http://server.roeck-us.net:8010/builders.
> >
> > I provided sparc64 images at
On Tue, Sep 02, 2014 at 01:53:18AM +0100, Andrew Bresticker wrote:
> On Mon, Sep 1, 2014 at 4:01 AM, Mark Rutland wrote:
> > On Fri, Aug 29, 2014 at 11:14:30PM +0100, Andrew Bresticker wrote:
> >> The Global Interrupt Controller (GIC) present on certain MIPS systems
> >> can be used to route
On Tue, Sep 02, 2014 at 10:16:22AM +0100, Russell King - ARM Linux wrote:
> On Tue, Sep 02, 2014 at 05:47:29PM +0900, AKASHI Takahiro wrote:
> > On 09/01/2014 08:47 PM, Russell King - ARM Linux wrote:
> >> On Wed, Aug 27, 2014 at 02:55:46PM +0900, AKASHI Takahiro wrote:
> >>> 1)
> >>> setting x0
The following chips are either similar or have only the resolution
different. Hence, change this driver to support these chips too:
BMI055 - combo chip (accelerometer part is identical to BMC150's)
BMA255 - identical to BMC150's accelerometer
BMA222E - 8 bit resolution
BMA250E - 10 bit
On Tue, Sep 02, 2014 at 09:15:18AM +0300, Eliezer Tamir wrote:
> On 02/09/2014 06:29, Jason Wang wrote:
> > On 09/01/2014 02:39 PM, Eliezer Tamir wrote:
> >> On 29/08/2014 06:08, Jason Wang wrote:
> Yes, but rx busy polling only works in process context and does not
> disable bh, so it
On Tue, Sep 2, 2014 at 11:21 AM, Geert Uytterhoeven
wrote:
> JFYI, when comparing v3.17-rc3[1] to v3.17-rc2[3], the summaries are:
> - build errors: +10/-22
Only known randconfig and new R_PPC64_REL24 relocation truncations.
Gr{oetje,eeting}s,
Geert
--
Geert
On 30 August 2014 05:40, Chanho Min wrote:
> It is fully legal for a controller to start handling busy-end interrupt
> before it has signaled that the command has completed. So make sure
> we do things in the proper order, Or it results that command interrupt
> is ignored so it can cause
When user requests V4L2_MEMORY_MMAP type buffers, the videobuf-core
will assign the corresponding offset to the 'boff' field of the
videobuf_buffer for each requested buffer sequentially. Later, user
may call mmap() to map one or all of the buffers with the 'offset'
parameter which is equal to its
Below is the list of build error/warning regressions/improvements in
v3.17-rc3[1] compared to v3.16[2].
Summarized:
- build errors: +17/-39
- build warnings: +131/-73
JFYI, when comparing v3.17-rc3[1] to v3.17-rc2[3], the summaries are:
- build errors: +10/-22
- build warnings: +49/-48
Hm... Now you've broken it into *too* many separate patches. Also the
subjects are the same. Also the subjects are too vague. Which coding
style issue is addressed?
It should be something like:
patch 1: comments
patch 2: add/remove spaces
patch 3: fix quoted text
patch 4: braces
patch 5: add
Hi Kuninori-san
This patch series will break the old DTs, and I will follow Mark's
Advice to maintain compatibility with the old DTs.
I will send another version, please help me to review it. And I will also
split the update patch series to many small ones.
Thanks very much,
BRs
Xiubo
>
On Tue, Sep 02, 2014 at 05:47:29PM +0900, AKASHI Takahiro wrote:
> On 09/01/2014 08:47 PM, Russell King - ARM Linux wrote:
>> On Wed, Aug 27, 2014 at 02:55:46PM +0900, AKASHI Takahiro wrote:
>>> 1)
>>> setting x0 to -ENOSYS is necessary because, otherwise, user-issued
>>> syscall(-1) will
>>>
Hi,
Am Montag, den 01.09.2014, 20:28 -0700 schrieb Greg Kroah-Hartman:
[...]
> > I checked the MAINTAINERS file,
> > I can only find the maintainer for some subfolders of drivers/gpu but no
> > entry
> > for drivers/gpu/ipu-v3.
> > So I'm not sure who is the maintainer for drivers/gpu/ipu-v3.
>
On Mon, Sep 01, 2014 at 12:29:46PM -0400, kan.li...@intel.com wrote:
> From: Kan Liang
>
> There are two types of event formats for PMU events. E.g. el-abort OR
> cpu/el-abort/. However, the lexer mistakenly recognizes the simple style
> format as two events.
>
> The parse_events_pmu_check
601 - 700 of 1554 matches
Mail list logo
