> Now that we use u64 for bits, we can simply & them together.
>
> Signed-off-by: Michael S. Tsirkin
> ---
> drivers/virtio/virtio.c | 10 ++
> 1 file changed, 6 insertions(+), 4 deletions(-)
>
Reviewed-by: David Hildenbrand
--
To unsubscribe from this list: send the line
On 12/01/2014 01:25 AM, Peter Crosthwaite wrote:
> Add a DTS describing the Digilent ZYBO board. Similar to ZED but with
> a 50MHz crystal instead of 33MHz.
>
> Acked-by: Soren Brinkmann
> Signed-off-by: Peter Crosthwaite
>
> ---
> Changed since v1:
> Change compat vendor prefix from xlnx to
> Based on patch by Cornelia Huck.
>
> Note: for consistency, and to avoid sparse errors,
> convert all fields, even those no longer in use
> for virtio v1.0.
>
> Signed-off-by: Cornelia Huck
> Signed-off-by: Michael S. Tsirkin
...
>
> -static unsigned int features[] = {
> +static
On 11/30/2014 11:58 AM, Anjana Sasindran wrote:
> This patch fix a checkpatch.pl error:
>
> ERROR: space prohibited before ')' parenthesis closing
>
> Signed-off-by: Anjana Sasindran
Thanks for the patch, but this driver is removed in kernel 3.19.
So there is no point in patching it.
Regards,
Hi Greg,
After merging the usb tree, today's linux-next build (arm
multi_v7_defconfig) failed like this:
arch/arm/mach-omap2/twl-common.c:94:21: error: array type has incomplete
element type
struct phy_consumer consumers[] = {
^
Caused by commit dbc98635e0d4 ("phy: remove
> From: Cornelia Huck
>
> The CCW_CMD_SET_VQ command has a different format for revision 1+
> devices, allowing to specify a more complex virtqueue layout. For
> now, we stay however with the old layout and simply use the new
> command format for virtio-1 devices.
>
> Signed-off-by: Cornelia
Provide a way to specify panel requirement in terms of supported media bus
format (particularly useful for panels connected to an RGB or LVDS bus).
Signed-off-by: Boris Brezillon
---
drivers/gpu/drm/panel/panel-simple.c | 5 +
1 file changed, 5 insertions(+)
diff --git
Add bus_formats and num_bus_formats fields and
drm_display_info_set_bus_formats helper function to specify the bus
formats supported by a given display.
This information can be used by display controller drivers to configure
the output interface appropriately (i.e. RGB565, RGB666 or RGB888 on raw
Provide a way to specify panel requirement in terms of supported media bus
format (particularly useful for panels connected to an RGB or LVDS bus).
Signed-off-by: Boris Brezillon
---
drivers/gpu/drm/panel/panel-simple.c | 5 +
1 file changed, 5 insertions(+)
diff --git
Foxlink's fl500wvr00-a0t supports RGB888 format.
Signed-off-by: Boris Brezillon
---
drivers/gpu/drm/panel/panel-simple.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c
b/drivers/gpu/drm/panel/panel-simple.c
index 66838a5..695f406 100644
---
Hello,
This series makes use of the MEDIA_BUS_FMT definition to describe how
the data are transmitted to the display.
This will allow drivers to configure their output display bus according
to the display capabilities.
For example some display controllers support DPI (or raw RGB) connectors
and
On Fri, Nov 28, 2014 at 7:54 PM, Dexuan Cui wrote:
-Original Message-
From: Jason Wang [mailto:jasow...@redhat.com]
Sent: Friday, November 28, 2014 18:13 PM
To: Dexuan Cui
Cc: gre...@linuxfoundation.org; linux-kernel@vger.kernel.org;
driverdev-
de...@linuxdriverproject.org;
Add bus_formats and num_bus_formats fields and
drm_display_info_set_bus_formats helper function to specify the bus
formats supported by a given display.
This information can be used by display controller drivers to configure
the output interface appropriately (i.e. RGB565, RGB666 or RGB888 on raw
Hello,
This series makes use of the MEDIA_BUS_FMT definition to describe how
the data are transmitted to the display.
This will allow drivers to configure their output display bus according
to the display capabilities.
For example some display controllers support DPI (or raw RGB) connectors
and
Foxlink's fl500wvr00-a0t supports RGB888 format.
Signed-off-by: Boris Brezillon
---
drivers/gpu/drm/panel/panel-simple.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c
b/drivers/gpu/drm/panel/panel-simple.c
index 66838a5..695f406 100644
---
On Sat, Nov 29, 2014 at 12:29 AM, Alexey Khoroshilov
wrote:
> If usb_hub_claim_port() fails, no resources are deallocated and
> if stub_add_files() fails, port is not released.
>
> The patch fixes these issues and rearranges error handling code.
>
> Found by Linux Driver Verification project
On nie, 2014-11-30 at 21:19 +0900, Tomasz Figa wrote:
> Hi Krzysztof,
>
> 2014-11-28 23:08 GMT+09:00 Krzysztof Kozlowski :
> > On pią, 2014-11-28 at 15:04 +0100, Linus Walleij wrote:
> >> On Wed, Nov 26, 2014 at 3:24 PM, Krzysztof Kozlowski
> >> wrote:
> >>
> >> > The audio subsystem on Exynos
On Sun, Nov 30, 2014 at 8:14 PM, Julia Lawall wrote:
> From: Julia Lawall
>
> Delete a local structure that is only used to be initialized by memset.
>
> A semantic patch that makes this change is as follows:
> (http://coccinelle.lip6.fr/)
>
> //
> @@
> identifier x,i;
> @@
>
> {
> ... when any
Add bus_formats and num_bus_formats fields and
drm_display_info_set_bus_formats helper function to specify the bus
formats supported by a given display.
This information can be used by display controller drivers to configure
the output interface appropriately (i.e. RGB565, RGB666 or RGB888 on raw
You resend this one later.
Send a reply to the originial thread when you do that so we don't
respond to this email.
regards,
dan carpenter
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at
On Mon, 1 Dec 2014, Dan Carpenter wrote:
> On Sat, Nov 29, 2014 at 10:59:47PM +0900, OGAWA Hirofumi wrote:
> > Julia Lawall writes:
> >
> > >> iput() checks NULL of inode. What is wrong just remove NULL check,
> > >> instead of adding new jump labels?
> > >
> > > Personally, I prefer that
On Sun, Nov 30, 2014 at 07:10:27PM +0100, Boris Brezillon wrote:
> Hello,
>
> This series provides an implementation for raw accesses taking care of
> hidding the specific layout used by the GPMI controller.
>
> Best Regards,
>
> Boris
>
> Changes since v5:
> - rename gpmi_move_bits into
Chase,
On Sun, Nov 30, 2014 at 11:05:56PM -0600, Chase Southwood wrote:
> There are a handful of calls to printk in ni_stc.h without specified log
> levels, as well as one in ni_mio_common.c. This patch converts these
> calls to pr_err() instead, so that they are now explicitly log level
> ERR.
This is version 11 of optprobe related patch series. I decide to merge
all related patches in one series to make my work easier. This series is
grouped by 3 different parts:
Patch 1/7 moves all ARM probe related code to arch/arm/probes according
to suggestion from Russell King.
Patch 2/7 - 5/7
On Sun, Nov 30, 2014 at 04:28:02PM +0530, Anjana Sasindran wrote:
> This patch fix a checkpatch.pl error:
>
> ERROR: space prohibited before ')' parenthesis closing
>
> Signed-off-by: Anjana Sasindran
> ---
> drivers/staging/media/omap24xx/v4l2-int-device.h | 2 +-
> 1 file changed, 1
In discussion on LKML (https://lkml.org/lkml/2014/11/28/158), Russell
King suggest to move all probe related code to arch/arm/probes. This
patch do the work. Due to dependency on 'arch/arm/kernel/patch.h', this
patch also move patch.h to 'arch/arm/include/asm/patch.h', and related
'#include'
This patch introdces 'checker' to decoding phase, and calls checkers
when instruction decoding. This allows further decoding for specific
instructions. This patch introduces a stub call of checkers in kprobe
arch_prepare_kprobe() as an example and for further expansion.
Signed-off-by: Wang Nan
This patch uses the previously introduced checker functionality on
store instructions to record their stack consumption information to
arch_probes_insn.
Signed-off-by: Wang Nan
Signed-off-by: Jon Medhurst
Reviewed-by: Jon Medhurst
---
v1 -> v2:
- Bugfix and code improvements following
This patch introduce kprobeopt for ARM 32.
Limitations:
- Currently only kernel compiled with ARM ISA is supported.
- Offset between probe point and optinsn slot must not larger than
32MiB. Masami Hiramatsu suggests replacing 2 words, it will make
things complex. Futher patch can make
From: Masami Hiramatsu
Pass the original kprobe for preparing an optimized kprobe arch-dep
part, since for some architecture (e.g. ARM32) requires the information
in original kprobe.
---
Signed-off-by: Masami Hiramatsu
Cc: Wang Nan
---
arch/x86/kernel/kprobes/opt.c | 3 ++-
This patch prohibits probing instructions for which the stack
requirements are unable to be determined statically. Some test cases
are found not work again after the modification, this patch also
removes them.
Signed-off-by: Wang Nan
Reviewed-by: Jon Medhurst
---
v1 -> v2:
- Use
devices, since we still lack power_domain driver, so the other power rail
of rk3288 need keep power on.
I have tested it on rk3288-evb board, atop next-20141112. goto suspend by type
"echo mem > /sys/power/state", vdd_cpu is about 0mv by measuring, so it can be
determined in sleep mode, then press
On Mon, 2014-12-01 at 16:24 +1100, Paul Mackerras wrote:
> On Mon, Dec 01, 2014 at 04:02:14PM +1100, Michael Ellerman wrote:
> > On Mon, 2014-12-01 at 15:28 +1100, Paul Mackerras wrote:
> > > The bounds check for nodeid in cache_alloc_node gives false
> > > positives on machines where the node
It's a basic version of suspend and resume for rockchip,
it only support RK3288 now.
Signed-off-by: Tony Xie
Signed-off-by: Chris Zhong
Signed-off-by: Doug Anderson
Tested-by: Doug Anderson
Reviewed-by: Doug Anderson
---
Changes in v10: None
Changes in v9:
- fold Doug's patches
- modify
The pmu-sram is used to store resume code, suspend/resume need get the
address of it. Therefore add a binding and documentation for it.
Signed-off-by: Tony Xie
Signed-off-by: Chris Zhong
Reviewed-by: Doug Anderson
---
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in
add pmu sram node for suspend, add global_pwroff pinctrl.
The pmu sram is used to store the resume code.
global_pwroff is held low level at work, it would be pull to high
when entering suspend. reference this in the board DTS file since
some boards need it.
Signed-off-by: Tony Xie
Signed-off-by:
Add suspend-voltages and necessary pin-states for suspend on
rk3288-evb-rk808 boards. global_pwroff would be pulled high when
RK3288 entering suspend, this pin is a sleep signal for RK808, so
RK808 could goto sleep mode, and some regulators would be disable.
Signed-off-by: Chris Zhong
---
To be more friendly with drop monitor, we should only call kfree_skb() when
the packets were dropped and use consume_skb() in other cases.
Cc: Eric Dumazet
Signed-off-by: Jason Wang
---
Changes from V3:
- rebase to net-next.git
Changes from V2:
- use unlikely() when necessary
Changes from V1:
-
These have extra 'checker' functions associated with them so
lets make sure those get covered by testing.
Signed-off-by: Jon Medhurst
Signed-off-by: Wang Nan
---
v1 -> v2:
- Move to arch/arm/probes/ .
---
arch/arm/probes/kprobes-test-arm.c | 17 +++--
On 12/01/2014 01:26 PM, Doug Anderson wrote:
Chris,
On Mon, Nov 24, 2014 at 11:32 PM, Chris Zhong wrote:
add pmu sram node for suspend, add global_pwroff pinctrl.
The pmu sram is used to store the resume code.
global_pwroff is held low level at work, it would be pull to high
when entering
On 11.08.2014 19:32, Zoltan Kiss wrote:
> There is a long known problem with the netfront/netback interface: if the
> guest
> tries to send a packet which constitues more than MAX_SKB_FRAGS + 1 ring
> slots,
> it gets dropped. The reason is that netback maps these slots to a frag in the
> frags
Hi Brian,
On Mon, 1 Dec 2014 00:47:09 -0800
Brian Norris wrote:
> On Sun, Nov 30, 2014 at 07:10:27PM +0100, Boris Brezillon wrote:
> > Hello,
> >
> > This series provides an implementation for raw accesses taking care of
> > hidding the specific layout used by the GPMI controller.
> >
> >
>>> +/*
>>> + * NOTE: the first sub and add instruction will be modified according
>>> + * to the stack cost of the instruction.
>>> + */
>>> +asm (
>>> + ".global optprobe_template_entry\n"
>>> + "optprobe_template_entry:\n"
>>> + " sub
On Sun 30-11-14 00:37:36, Lino Sanfilippo wrote:
> In fanotify_mark_remove_from_mask() a mark is destroyed if only one of both
> bitmasks (mask or ignored_mask) of a mark is cleared. However the other mask
> may still be set and contain information that should not be lost. Thus only
> destroy a
On Sun, 30 Nov 2014 17:09:08 +0200
"Michael S. Tsirkin" wrote:
> Add low level APIs to test/set/clear feature bits.
> For use by transports, to make it easier to
> write code independent of feature bit array format.
>
> Note: APIs is prefixed with __ and has _bit suffix
> to stress its low
On Sun 30-11-14 00:37:37, Lino Sanfilippo wrote:
> If removing bits from a marks ignored mask, the concerning inodes/vfsmounts
> mask is not affected. So dont recalculate it.
>
> Signed-off-by: Lino Sanfilippo
Looks good. You can add:
Reviewed-by: Jan Kara
> -Original Message-
> From: Mark Rutland [mailto:mark.rutl...@arm.com]
> Sent: Friday, November 28, 2014 6:33 PM
> To: Zhang Zhuoyu-B46552
> Cc: linux-kernel@vger.kernel.org; ker...@pengutronix.de; linux-arm-
> ker...@lists.infradead.org; Li Yang-Leo-R58472; linuxppc-
>
Once the current message is finished, the driver notifies SPI core about
this by calling spi_finalize_current_message(). This function queues next
message to be transferred. If there are more messages in the queue, it is
possible that the driver is asked to transfer the next message at this
point.
Fix following build errors when PM_SLEEP is disabled (e.g. by disabling
SUSPEND and HIBERNATION):
drivers/clk/samsung/clk-exynos4415.c: In function ‘exynos4415_cmu_init’:
drivers/clk/samsung/clk-exynos4415.c:982:2: error: ‘exynos4415_ctx’ undeclared
(first use in this function)
On Thu, Nov 27, 2014 at 02:41:21PM +0800, Jason Wang wrote:
> Signed-off-by: Jason Wang
Applied, thanks.
> ---
> drivers/vhost/vhost.h | 4
> 1 file changed, 4 deletions(-)
>
> diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
> index 3eda654..7d039ef 100644
> ---
On Mon, Dec 01, 2014 at 04:12:37AM +, Ben Hutchings wrote:
> On Sun, 2014-11-30 at 18:44 +0300, Sergei Shtylyov wrote:
> > Hello.
> >
> > On 11/30/2014 6:11 PM, Michael S. Tsirkin wrote:
> >
> > > We need to use bit 32 for virtio 1.0
> >
> > > Signed-off-by: Michael S. Tsirkin
> > >
On Sat, Nov 29, 2014 at 2:03 AM, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki
>
> It is not valid to select CONFIG_PM directly without selecting
> CONFIG_PM_SLEEP or CONFIG_PM_RUNTIME too, because that breaks
> dependencies (ia64 does that) and it is not necessary to select
> CONFIG_PM
On 12/1/14 6:28 AM, Paul Mackerras wrote:
---
v2: include the oops message in the patch description
mm/slab.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/mm/slab.c b/mm/slab.c
index eb2b2ea..f34e053 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -3076,7 +3076,7 @@ static
I forgot to mention these comments:
On Tue, Nov 04, 2014 at 08:47:00PM +0800, Zhou Wang wrote:
> +static int hisi_nfc_remove(struct platform_device *pdev)
> +{
> + struct hinfc_host *host = platform_get_drvdata(pdev);
> + struct mtd_info *mtd = >mtd;
> +
> + nand_release(mtd);
> +
On Mon, Dec 01, 2014 at 09:16:41AM +0100, David Hildenbrand wrote:
> > Based on patch by Cornelia Huck.
> >
> > Note: for consistency, and to avoid sparse errors,
> > convert all fields, even those no longer in use
> > for virtio v1.0.
> >
> > Signed-off-by: Cornelia Huck
> >
On Mon, Dec 01, 2014 at 09:16:41AM +0100, David Hildenbrand wrote:
> > Based on patch by Cornelia Huck.
> >
> > Note: for consistency, and to avoid sparse errors,
> > convert all fields, even those no longer in use
> > for virtio v1.0.
> >
> > Signed-off-by: Cornelia Huck
> >
On Mon, Dec 01, 2014 at 04:53:15PM +0800, Jason Wang wrote:
> To be more friendly with drop monitor, we should only call kfree_skb() when
> the packets were dropped and use consume_skb() in other cases.
>
> Cc: Eric Dumazet
> Signed-off-by: Jason Wang
Acked-by: Michael S. Tsirkin
> ---
>
On Fri, 28 Nov 2014, Jay Aurabind wrote:
> Hello all,
>
> I notice that some activity has been going on with the minimum value
> of display brightness recently (e1c412e7575).
>
> But the minimum value thats currently chosen is not at all acceptable
> for my eyes. My display is working perfectly
Hi Laurent,
On 11/29/2014 05:38 PM, Laurent Pinchart wrote:
Hi Jacek,
Thank you for the patch.
On Friday 28 November 2014 10:17:56 Jacek Anaszewski wrote:
It is useful to have an access to the async sub-device
being matched, not only to the related struct device.
Change match callback
(2014/11/29 1:01), Steve Capper wrote:
> On 27 November 2014 at 06:07, Masami Hiramatsu
> wrote:
>> (2014/11/27 3:59), Steve Capper wrote:
>>> The crash is extremely easy to reproduce.
>>>
>>> I've not observed any missed events on a kprobe on an arm64 system
>>> that's still alive.
>>> My
Hi Lee,
Sorry for the late reply.
On Mon, 10 Nov 2014 09:57:28 +
Lee Jones wrote:
> On Wed, 05 Nov 2014, Boris Brezillon wrote:
>
> > Atmel AT91 SoCs have a memory range reserved for SMC (Static Memory
> > Controller) configuration.
> > Expose those registers so that drivers can make use
Le 01/12/2014 10:38, Boris Brezillon a écrit :
> Hi Lee,
>
> Sorry for the late reply.
>
> On Mon, 10 Nov 2014 09:57:28 +
> Lee Jones wrote:
>
>> On Wed, 05 Nov 2014, Boris Brezillon wrote:
>>
>>> Atmel AT91 SoCs have a memory range reserved for SMC (Static Memory
>>> Controller)
guten Tag
Dies sind Skipton Finanzdienstleistungen, bieten wir heute Darlehen Zinssatz
von 3%, unsere Art von Darlehen sind: - Business-Darlehen,
Intercompany-Darlehen Personen Darlehen und Kredite Familie. Wenn Sie Interesse
an unserem Angebot haben Darlehen füllen Sie bitte untenstehendes
Hello,
On 2014-11-30 23:23, SF Markus Elfring wrote:
From: Markus Elfring
Date: Sun, 30 Nov 2014 23:10:51 +0100
The vb2_put_vma() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the
Commit-ID: eda7516e1d428caf3cfc88e4292f2a1357a2e569
Gitweb: http://git.kernel.org/tip/eda7516e1d428caf3cfc88e4292f2a1357a2e569
Author: Borislav Petkov
AuthorDate: Sun, 30 Nov 2014 13:37:43 +0100
Committer: Thomas Gleixner
CommitDate: Mon, 1 Dec 2014 10:38:30 +0100
irqdomain: Correct
> -Original Message-
> From: Jason Wang [mailto:jasow...@redhat.com]
> Sent: Monday, December 1, 2014 16:23 PM
> To: Dexuan Cui
> Cc: gre...@linuxfoundation.org; linux-kernel@vger.kernel.org; driverdev-
> de...@linuxdriverproject.org; o...@aepfle.de; a...@canonical.com; KY
> Srinivasan;
On Mon, Dec 01, 2014 at 03:25:02AM +, li.xi...@freescale.com wrote:
> Ping :) .
>
> Thanks very much.
Applied with a few whitespace cleanups.
Thanks,
Thierry
pgpxxim3OwRtA.pgp
Description: PGP signature
> Subject: Re: [PATCH v2 0/3] pwm: ftm: add Power Management support
>
> On Mon, Dec 01, 2014 at 03:25:02AM +, li.xi...@freescale.com wrote:
> > Ping :) .
> >
> > Thanks very much.
>
> Applied with a few whitespace cleanups.
>
Hi Thierry,
Thanks verrry much.
BRs
Xiubo
--
To unsubscribe
On 30/11/14 12:51, Lino Sanfilippo wrote:
> In case of a spurious interrupt dont forget to reenable the interrupts that
> have been masked by reading the interrupt source register.
>
> Signed-off-by: Lino Sanfilippo
> ---
> drivers/net/ethernet/marvell/skge.c | 3 +--
> 1 file changed, 1
Hi Sebastian,
On Monday 24 November 2014 05:21 PM, Sebastian Andrzej Siewior wrote:
> * Vignesh R | 2014-11-14 10:37:25 [+0530]:
>
>> This series of patches fix TSC defects related to lag in touchscreen
>> performance and cursor jump at touch release. The lag was result of
>> udelay in TSC
Dexuan Cui writes:
>> -Original Message-
>> From: Jason Wang [mailto:jasow...@redhat.com]
>> Sent: Monday, December 1, 2014 16:23 PM
>> To: Dexuan Cui
>> Cc: gre...@linuxfoundation.org; linux-kernel@vger.kernel.org; driverdev-
>> de...@linuxdriverproject.org; o...@aepfle.de;
Hi, Vinod,
Could you please help review and merge this patch if possible. Thanks.
Thanks and Best Regards,
Jingchang
>>-Original Message-
>>From: Jingchang Lu [mailto:jingchang...@freescale.com]
>>Sent: Wednesday, October 22, 2014 4:54 PM
>>To: vinod.k...@intel.com
>>Cc:
On Sun, 30 Nov 2014 17:09:50 +0200
"Michael S. Tsirkin" wrote:
> virtio 1.0 makes all memory structures LE, so
> we need APIs to conditionally do a byteswap on BE
> architectures.
>
> To make it easier to check code statically,
> add virtio specific types for multi-byte integers
> in memory.
>
Commit-ID: 02ecc41abcea4ff9291d548f6f846b29b354ddd2
Gitweb: http://git.kernel.org/tip/02ecc41abcea4ff9291d548f6f846b29b354ddd2
Author: Borislav Petkov
AuthorDate: Sun, 30 Nov 2014 14:26:39 +0100
Committer: Thomas Gleixner
CommitDate: Mon, 1 Dec 2014 10:55:08 +0100
x86, microcode:
On 01/12/14 08:47, Jeremiah Mahler wrote:
Chase,
On Sun, Nov 30, 2014 at 11:05:56PM -0600, Chase Southwood wrote:
There are a handful of calls to printk in ni_stc.h without specified log
levels, as well as one in ni_mio_common.c. This patch converts these
calls to pr_err() instead, so that
On 12/01/2014 10:53 AM, Vignesh R wrote:
> Hi Sebastian,
Hi Vignesh,
> I fixed the issue that was triggering the WARN_ON(). I think it would be
> better if you tested these patches, before I posted them on the
> mainline. I don't want to clutter the list with too main versions. Here
> is the
> On Mon, Dec 01, 2014 at 09:16:41AM +0100, David Hildenbrand wrote:
> > > Based on patch by Cornelia Huck.
> > >
> > > Note: for consistency, and to avoid sparse errors,
> > > convert all fields, even those no longer in use
> > > for virtio v1.0.
> > >
> > > Signed-off-by: Cornelia
I think the subject doesn't need "for module use" because that's
implicit in exporting a symbol.
On Fri, Nov 28, 2014 at 07:12:58PM +0800, Vince Hsu wrote:
> Some Tegra drivers might be complied as kernel modules, and
"compiled"
> they need the fuse information for initialization. One
> example
On Sat, 29 Nov 2014, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki
>
> After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
> selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks
> depending on CONFIG_PM_RUNTIME may now be changed to depend on
> CONFIG_PM.
>
>
I am announcing the release of the Linux 3.16.7-ckt2 kernel.
The updated 3.16.y-ckt tree can be found at:
git://kernel.ubuntu.com/ubuntu/linux.git linux-3.16.y
and can be browsed at:
http://kernel.ubuntu.com/git?p=ubuntu/linux.git;h=refs/heads/linux-3.16.y;a=shortlog
The diff from
On Sun 30-11-14 00:37:38, Lino Sanfilippo wrote:
> Before flag FAN_ONDIR was implicitly set in a marks ignored mask. This led to
> some inconsistent behaviour:
>
> 1. It was not possible to remove the flag from the ignored mask, once it was
> set
> (implicitly) with a call like
>
>
On 01/12/14 05:05, Chase Southwood wrote:
There are a handful of calls to printk in ni_stc.h without specified log
levels, as well as one in ni_mio_common.c. This patch converts these
calls to pr_err() instead, so that they are now explicitly log level
ERR.
Signed-off-by: Chase Southwood
---
On Sun, 30 Nov 2014 17:10:17 +0200
"Michael S. Tsirkin" wrote:
> set FEATURES_OK as per virtio 1.0 spec
>
> Signed-off-by: Michael S. Tsirkin
> ---
> include/uapi/linux/virtio_config.h | 2 ++
> drivers/virtio/virtio.c| 29 ++---
> 2 files changed, 24
Hi all,
I will not be releasing a linux-next tree tomorrow.
Changes since 20141128:
The samsung tree gained a conflict against the arm-soc tree.
The v4l-dvb tree gained a conflict against the arm-soc tree.
The mmc-uh tree gained a conflict against the arm-soc tree.
The driver-core tree
Hi all,
Thanks for the patch, review comments are below.
For the next version I would appreciate if someone can test this driver with
the latest v4l2-compliance from the v4l-utils git repo. If possible test
streaming
as well (v4l2-compliance -s), ideally with both a sensor and a STD receiver
From: Borislav Petkov
Hand down the cpu number instead, otherwise lockdep screams when doing
echo 1 > /sys/devices/system/cpu/microcode/reload.
BUG: using smp_processor_id() in preemptible [] code:
amd64-microcode/2470
caller is debug_smp_processor_id+0x12/0x20
CPU: 1 PID: 2470 Comm:
On Sun, 30 Nov 2014 17:10:22 +0200
"Michael S. Tsirkin" wrote:
> Now that we use u64 for bits, we can simply & them together.
>
> Signed-off-by: Michael S. Tsirkin
> ---
> drivers/virtio/virtio.c | 10 ++
> 1 file changed, 6 insertions(+), 4 deletions(-)
Reviewed-by: Cornelia Huck
On 10/20/2014 02:52 PM, Michael S. Tsirkin wrote:
RFC patches to enable tx interrupts.
This is to demonstrate how this can be done without
core virtio changes, and to make sure I understand
the new APIs correctly.
Testing TBD, I was asked for a version for early testing.
Applies on top of
Hi James,
Can you pass these patches on to Linus please?
The first one fixes the handling of maximum buffer size for key descriptions,
fixing the size at 4095 + NUL char rather than whatever PAGE_SIZE happens to
be and permits you to read back the full description without it getting
clipped
On newer hosts that support delayed tx interrupts,
we probably don't have much to gain from orphaning
packets early.
Note: this might degrade performance for
hosts without event idx support.
Should be addressed by the next patch.
Cc: Rusty Russell
Cc: Michael S. Tsirkin
Signed-off-by: Michael
Hello:
We used to orphan packets before transmission for virtio-net. This breaks
socket accounting and can lead serveral functions won't work, e.g:
- Byte Queue Limit depends on tx completion nofication to work.
- Packet Generator depends on tx completion nofication for the last
transmitted
We already have counters for sent packets and sent bytes.
Use them to reduce the number of u64_stats_update_begin/end().
Take care not to bother with stats update when called
speculatively.
Cc: Rusty Russell
Cc: Michael S. Tsirkin
Signed-off-by: Jason Wang
Signed-off-by: Michael S. Tsirkin
This patch enables the interrupt coalescing setting through ethtool.
Cc: Rusty Russell
Cc: Michael S. Tsirkin
Signed-off-by: Jason Wang
---
drivers/net/virtio_net.c| 67 +
include/uapi/linux/virtio_net.h | 12
2 files changed, 79
From: "jeffrey.lin"
This patch is porting Raydium I2C touch driver. Developer can enable
raydium touch driver by modifying define "CONFIG_TOUCHSCREEN_RM_TS".
Change-Id: I5f33cfdf0e895de6e7d535c11dd4b3ce8b49fa48
Signed-off-by: jeffrey@rad-ic.com
---
drivers/input/touchscreen/Kconfig |
This patch implements interrupt coalescing support for vhost_net. And provides
ioctl()s for userspace to get and set coalescing parameters. Two kinds of
parameters were allowed to be set:
- max_coalesced_frames: which is the maximum numbers of packets were allowed
before issuing an irq.
-
On Mon, Dec 1, 2014 at 5:47 PM, Dexuan Cui wrote:
-Original Message-
From: Jason Wang [mailto:jasow...@redhat.com]
Sent: Monday, December 1, 2014 16:23 PM
To: Dexuan Cui
Cc: gre...@linuxfoundation.org; linux-kernel@vger.kernel.org;
driverdev-
de...@linuxdriverproject.org;
On Mon, Dec 01, 2014 at 05:53:16AM +, zhuoyu.zh...@freescale.com wrote:
>
>
> > -邮件原件-
> > 发件人: Mark Rutland [mailto:mark.rutl...@arm.com]
> > 发送时间: Friday, November 28, 2014 6:33 PM
> > 收件人: Zhang Zhuoyu-B46552
> > 抄送: linux-kernel@vger.kernel.org; ker...@pengutronix.de; linux-arm-
From: "Michael S. Tsirkin"
Improve tx batching using byte queue limits.
Should be especially effective for MQ.
Cc: Rusty Russell
Cc: Michael S. Tsirkin
Signed-off-by: Michael S. Tsirkin
---
drivers/net/virtio_net.c | 7 +++
1 file changed, 7 insertions(+)
diff --git
Hi,
During our rigorous testing of inserting and removing SD card, we
found exception in the kernel. Please find the backtrace is as below:
[ 1899.301985] Backtrace:
[ 1899.325461] [<800117c4>] (dump_backtrace+0x0/0x100) from [<803f2cf4>]
(dump_stack+0x18/0x1c)
[ 1899.375000] [<803f2cdc>]
From: Markus Elfring
Date: Mon, 1 Dec 2014 11:18:21 +0100
The ceph_put_snap_context() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring
1 - 100 of 1960 matches
Mail list logo
