Thanks :)
-Original Message-
From: Viresh Kumar [mailto:viresh.ku...@linaro.org]
Sent: 05 March 2015 10:26
To: Rahul Khandelwal (Rahul Khandelwal)
Cc: r...@rjwysocki.net; a...@linux-foundation.org;
linux-kernel@vger.kernel.org; sta...@vger.kernel.org
Subject: Re: [PATCH 1/1] subsystem:
On Thu, 05 Mar 2015, Sebastian Reichel wrote:
> Hi,
>
> On Wed, Feb 04, 2015 at 04:24:35PM -0800, Todd Brandt wrote:
> > New power_supply driver at driver/power which interfaces with the
> > axp20x mfd driver as a cell. Provides battery info, monitors for
> > changes, and generates alerts on temp
On Tue, Mar 03, 2015 at 12:07:20PM +0900, Namhyung Kim wrote:
SNIP
> +static int record__merge_index_files(struct record *rec, int nr_index)
> +{
> + int i;
> + int ret = -1;
> + u64 offset;
> + char path[PATH_MAX];
> + struct perf_file_section *idx;
> + struct perf_data_f
On 03/04/2015 05:14 PM, Jacek Anaszewski wrote:
Add macros for defining boost mode and trigger type properties
of flash LED devices.
Signed-off-by: Jacek Anaszewski
Acked-by: Kyungmin Park
Cc: Bryan Wu
Cc: Richard Purdie
---
include/dt-bindings/leds/max77693.h | 21 +
On Thu, 05 Mar 2015, Axel Lin wrote:
> The defines in phy-miphy365x.h are all covered in phy.h:
>
> MIPHY_TYPE_SATA == PHY_TYPE_STA
> MIPHY_TYPE_PCIE == PHY_TYPE_PCIE
> MIPPHY_TYPE_USB == PHY_TYPE_USB2
>
> So covert to use phy.h and then delete phy-miphy365x.h.
>
> Signed-off-by: Axel Lin
> --
On Thu, 05 Mar 2015, Axel Lin wrote:
> Prefer devm_kcalloc over devm_kzalloc with multiply.
> In additional, use sizeof(phy) is incorrect, fix it.
>
> Signed-off-by: Axel Lin
> ---
> drivers/phy/phy-miphy365x.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
Acked-by: Lee Jones
On 2015/3/5 6:29, Rafael J. Wysocki wrote:
> On Wednesday, February 25, 2015 04:39:42 PM Hanjun Guo wrote:
>> CPU hardware ID (phys_id) is defined as u32 in structure acpi_processor,
>> but phys_id is used as int in acpi processor driver, so it will lead to
>> some inconsistence for the drivers.
>>
Hi Ivan,
On Wed, 04 Mar 2015 14:28:20 +0200, Ivan.khoronzhuk wrote:
> On 02/26/2015 11:41 AM, Jean Delvare wrote:
> > On Thu, 26 Feb 2015 09:50:42 +0100, Jean Delvare wrote:
> >> Please also note that the recently released version 3.0.0 of the SMBIOS
> >> specification introduces a new entry point
Make it all a bit easier on the eyes:
- Move the __setup_param() lines right after their init functions
- Use consistent vertical spacing
- Use more horizontal spacing to make it look like regular C code
- Use standard comment style
Cc: Luis R. Rodriguez
Cc: Andrew Morton
Cc: Andy Lutomirs
On 03/05/2015 12:53 AM, David Rientjes wrote:
On Wed, 4 Mar 2015, Kazutomo Yoshii wrote:
I noticed that numa_alloc_onnode() failed to allocate memory on a
specified node in v4.0-rc1. I added a code to check the return value
of walk_page_range() in queue_pages_range() so that do_mbind() only
ret
+Cc Viresh Kumar
Viresh, this is the patch for the underlying clocks for the Mediatek
cpufreq driver.
On Thu, Mar 05, 2015 at 10:43:21AM +0800, Pi-Cheng Chen wrote:
> Hi Sascha,
>
> On 4 March 2015 at 19:21, Sascha Hauer wrote:
> > On Wed, Mar 04, 2015 at 06:49:11PM +0800, pi-cheng.chen wrote:
On 03/05/2015 02:09 AM, Marcelo Tosatti wrote:
>> Can you please include the series?
>>
>> Thanks
>
> Sebastian?
I will pick it up, don't worry. I think I do my -RT day tomorrow.
Sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majo
On Wed, 04 Mar 2015, Ville Syrjälä wrote:
> On Wed, Mar 04, 2015 at 08:11:38PM +0530, Purushothaman, Vijay A wrote:
>> Minor nitpick: typo in patch title
>
> Dang. I already fixed a typo there before sending this out, but turns
> out I only managed to cchange it into a different typo :( Maybe I ne
This drivers allows a fixed framebuffer memory to be set by an additional
IORESOURCE_MEM resource. Thus add an example to the DT documentation.
Signed-off-by: Alexander Stein
Acked-by: Nicolas Ferre
---
Changes in v2:
* Fix typo noticed by checkpatch.pl
Documentation/devicetree/bindings/video/
Hi Ingo,
On Thu, Mar 05, 2015 at 03:56:20AM +0100, Ingo Flaschberger wrote:
> Dear Markus,
>
> as I get no answer at the kernel mailinglist:
> your patch to use devm_kzalloc instead of kzalloc produce driver crashes
> when the 1wire bus is unbound and bound again (see details below).
>
> What do
ip_check_defrag() may be used by af_packet to defragment outgoing packets.
skb_network_offset() of af_packet's outgoing packets is not zero.
Signed-off-by: Alexander Drozdov
---
net/ipv4/ip_fragment.c | 11 +++
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/net/ipv4/ip_fra
On 5 March 2015 at 11:58, Viresh Kumar wrote:
> On 5 March 2015 at 09:02, Pi-Cheng Chen wrote:
>> In the case of Mediatek SoC, the intermediate frequency might not be one
>> entry
>> of OPP table. To elaborate, the source clock node of the CPUs/Cluster on
>> Mediatek SoC is a mux. The mux has se
Hi Viresh,
Thanks for reviewing.
Please see my reply below:
On 4 March 2015 at 19:09, Viresh Kumar wrote:
> Haven't reviewed it completely yet, but this is all I have done.
>
> On 4 March 2015 at 14:19, pi-cheng.chen wrote:
>
>> +static int mtk_cpufreq_notify(struct notifier_block *nb,
>> +
Now that we've simplified the gbpages config space, move the
'page_size_mask' initialization into probe_page_size_mask(), right
next to the PSE and PGE enablement lines.
Cc: Luis R. Rodriguez
Cc: Andrew Morton
Cc: Andy Lutomirski
Cc: Borislav Petkov
Cc: Borislav Petkov
Cc: Dave Hansen
Cc:
It's a bit pointless to allow Kconfig configuration for 1GB kernel
mappings, it's already hidden behind a 'default y' and CONFIG_EXPERT.
Remove this complication and simplify the code by renaming
CONFIG_ENABLE_DIRECT_GBPAGES to CONFIG_X86_DIRECT_GBPAGES and
document the DEBUG_PAGE_ALLOC and KMEMC
On 2015/03/05 10:23, Gu Zheng wrote:
Hi Kamazawa-san,
On 03/04/2015 01:45 PM, Kamezawa Hiroyuki wrote:
On 2015/03/03 22:18, Tejun Heo wrote:
Hello, Kame.
On Tue, Mar 03, 2015 at 03:53:46PM +0900, Kamezawa Hiroyuki wrote:
relationship between proximity domain and lapic id doesn't change.
rela
On 03/04/2015 08:34 PM, Kim Phillips wrote:
> I don't see how, e.g., for one, dma_map_sg is I/O TLB
> implementation-dependent.
I'll need some remedial classes on this topic, but for the moment I
don't see how this matters for mapping sg chains. Can you share some
pointers?
Thanks,
Cristian S.
On 2015/3/5 6:56, Rafael J. Wysocki wrote:
> On Wednesday, February 25, 2015 04:39:40 PM Hanjun Guo wrote:
>> Changes since v8:
>> - remove MPIDR packing things by introducing phys_cpuid_t;
>>
>> - update patch acpi: fix acpi_os_ioremap for arm64 to follow
>> Rafael's suggestion;
>>
>> -
On Thu, Mar 05, 2015 at 01:59:45PM +0800, Peter Hung wrote:
> Did you received the series of F81232 V8 patches ? Please tell me if
> not received.
I got it. I just haven't had time to look at it yet. Will try to do so
this week.
Johan
--
To unsubscribe from this list: send the line "unsubscribe
Hi Jeff,
On 03/05/2015 01:06 AM, Jeff Layton wrote:
> Commit 8634b51f6ca2 (locks: convert lease handling to file_lock_context)
> introduced a regression in the handling of lease upgrade/downgrades.
>
> In the event that we already have a lease on a file and are going to
> either upgrade or downgr
On Wed, 4 Mar 2015, Kazutomo Yoshii wrote:
> I noticed that numa_alloc_onnode() failed to allocate memory on a
> specified node in v4.0-rc1. I added a code to check the return value
> of walk_page_range() in queue_pages_range() so that do_mbind() only
> returns an error number or zero.
>
I assum
On Mon, 2 Mar 2015 22:29:45 +0100 Pavel Machek wrote:
> On Tue 2015-02-24 15:33:53, NeilBrown wrote:
> > The USB Battery Charging spec (BC1.2) suggests a dedicated
> > charging port can deliver from 0.5 to 5.0A at between 4.75 and 5.25
> > volts.
> >
> > To choose the "correct" current voltage s
On 4 March 2015 at 22:37, Ingo Molnar wrote:
>
> * Victor Kamensky wrote:
>
>> Hi Arnaldo, Ingo,
>>
>> What happened with this pull request? [...]
>
> This pull request was for v4.1, and I merged it in:
Ok, I got it. Sorry I missed that before.
> commit 8a26ce4e544659256349551283414df504889a59
On Thu, Mar 05, 2015 at 01:24:47AM +, Horiguchi Naoya(堀口 直也) wrote:
> On Wed, Mar 04, 2015 at 11:12:33PM +, Luck, Tony wrote:
> > > - fixed AR and UC order in enum severity_level because UC is severer than
> > > AR
> > > by definition. Current code is not affected by this wrong order by
On Mon, 2 Mar 2015 22:29:39 +0100 Pavel Machek wrote:
> On Tue 2015-02-24 15:33:53, NeilBrown wrote:
> > If it cannot, we will stop pulling more current when voltage drops.
>
> Can you justify it a bit more?
>
> I mean... maybe there's a fuse in the charger? Or maybe it will supply
> the curren
* Victor Kamensky wrote:
> Hi Arnaldo, Ingo,
>
> What happened with this pull request? [...]
This pull request was for v4.1, and I merged it in:
commit 8a26ce4e544659256349551283414df504889a59
Merge: acba3c7e4652 726f3234dd12
Author: Ingo Molnar
Date: Wed Feb 18 19:14:54 2015 +0100
Me
On Mon, 2 Mar 2015 22:09:26 +0100 Pavel Machek wrote:
> On Tue 2015-02-24 15:33:52, NeilBrown wrote:
> > Add a 'continuous' option for usb charging which enabled
> > the "linear" charging mode of the twl4030.
>
> Documentation/ :-).
!
>
> > Linear charging does a good job with not so reliable
* Kees Cook wrote:
> Switch to using the newly created asm-generic/seccomp.h for the
> seccomp strict mode syscall definitions. The obsolete sigreturn
> syscall override is retained in 32-bit mode, and the ia32 syscall
> overrides are used in the compat case. Remaining definitions were
> ide
On Mon, 2 Mar 2015 22:05:26 +0100 Pavel Machek wrote:
> On Tue 2015-02-24 15:33:52, NeilBrown wrote:
> > 'max_current' sysfs attributes are created which allow the
> > max to be set.
> > Whenever a current source changes, the default is restored.
> > This will be followed by a uevent, so user-spa
Letzte Warnung Webmail Benutzer
Dies ist eine Nachricht von Ihrem E-Mail-Service-IT-Team, um Ihr Konto zu
aktualisieren Wir aktualisieren alle E-Mail-Konten, sind alle Benutzer keine
Themen Überprüfung Ihre E-Mail-Konto für die Aktualisierung und Updates. Bitte
überprüfen Sie und aktualisie
On Thu, Mar 05, 2015 at 04:21:21PM +1100, NeilBrown wrote:
> Hi Al (and others),
>
> I wonder if you could look over this patchset.
> It allows RCU-walk to follow symlinks in many common cases,
> thus removing a surprising performance hit caused by using symlinks.
>
> The last could of patche
Add the new list that Mediatek specific patches should also be
directed to.
Signed-off-by: Matthias Brugger
---
MAINTAINERS | 1 +
1 file changed, 1 insertion(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index ddc5a8c..3e30c83 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1205,6 +1205,7 @@ F:
Hello,
Peter Hung 於 2015/2/26 下午 06:02 寫道:
This series patch V8 is changed from V7 as following:
1. The V7 MSR strange delta value is checked with locking problem. We changed
f81232_set_mctrl() & f81232_read_msr() lock mechanism, the old version is
only locked with variable protection,
On Mon, 2015-03-02 at 19:54 -0800, Joe Perches wrote:
> Use the built-in function instead of memset.
>
> Signed-off-by: Joe Perches
Acked-by: Don Fry
for pcnet32.c
> ---
> drivers/net/ethernet/amd/pcnet32.c | 2 +-
> drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 2 +-
On Wed, 25 Feb 2015 07:24:43 + Lee Jones wrote:
> On Tue, 24 Feb 2015, NeilBrown wrote:
>
> > The twl4030 usb phy needs to be active while we are using
> > the USB VBUS as a current source for charging.
> > In particular, the usb3v1 regulator must be enabled and the
> > PHY_PWR_PHYPWD bit mu
The NLMSG_OK macro compares three things:
- the len arg from the user
- a size_t: sizeof(struct nlmsghdr)
- an int: sizeof(struct nlmsghdr) casted
- an u32: the nlmsghdr->nlmsg_len member
When building with -Wsign-compare, this macro triggers a signed compare
warning. This is because it compa
From: Igal Liberman
The Freescale Data Path Acceleration Architecture (DPAA) is a set of
hardware components on specific QorIQ P and T series multicore processors.
This architecture provides the infrastructure to support simplified
sharing of networking interfaces and accelerators by multiple CPU
On Wed, Mar 4, 2015 at 1:57 AM, Fabian Frederick wrote:
> ceph_aops was already defined extern in addr.c section
>
> Signed-off-by: Fabian Frederick
> ---
> fs/ceph/super.h |1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/fs/ceph/super.h b/fs/ceph/super.h
> index 04c8124..02ca99c 10064
Hi Lukasz,
On 03/04/2015 07:38 PM, Lukasz Majewski wrote:
> Hi Chanwoo,
>
>> This patch adds the support for Exynos5433's TMU (Thermal Management
>> Unit). Exynos5433 has a little different register bit fields as
>> following description:
>> - Support the eight trip points for rising/falling inte
This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC based on
Octal core CPUs (quad Cortex-A57 and quad Cortex-A53). And Exynos5433 supports
PSCI (Power State Coordination Interface) v0.1.
This patch includes following dt node to support Exynos5433 SoC:
1. Octa core for big.LITTLE
This patch adds SPI (Serial Peripheral Interface) dt node for Exynos5433 SoC.
SPI transfers serial data by using various peripherals. SPI includes
8-bit/16-bit/32-bit shift registers to transmit and receive data. PDMA is used
for SPI communication.
Cc: Kukjin Kim
Cc: Mark Rutland
Cc: Marc Zyngie
This patch adds RTC (Real Time Clock) dt node for Exynos5433 SoC and adds
ADC dt node for Exynos5433 SoC. The c1b501564c98a94b4(iio: adc: exynos_adc:
Add support for exynos7) commit supports the ADC for Exynos7. Exynos5433's ADC
IP is the same with Exynos7's ADC IP. Exynos5433 has a little differen
This patch adds PMU (Power Management Unit) dt node for Exynos5433 SoC and
set the source clock for CLKOUT register as xxti .
Cc: Kukjin Kim
Signed-off-by: Chanwoo Choi
[ideal.song: Add the setting of CLKOUT register]
Signed-off-by: Inha Song
Acked-by: Inki Dae
---
Documentation/devicetree/bi
This patch adds the TMU (Thermal Management Unit) sensor devicetree node for
Exynos5433. The Exynos5433 includes the five temperature sensors as following:
- two temperature sensor for Cortex-A57 (ATLAS)
- one temperature sensor for Cortex-A53 (APOLLO)
- one temperature sensor for G3D IP
- one temp
From: Inha Song
This patch adds I2S device tree node for Exynos5433 SoC.
In Exynos5433 SoC, I2S0 is used for audio interface.
Signed-off-by: Inha Song
Signed-off-by: Chanwoo Choi
Acked-by: Inki Dae
---
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 17 +
1 file changed, 17 inse
This patchset adds new 64-bit Exynos5433 Samsung SoC which contains quad
Cortex-A57 and quad Cortex-A53. It is desigend with the 20nm low power process.
Depends on:
- This patch-set has the dependency on Exynos5433 clock driver[1][2] and
pinctrl driver[3].
The Exynos5433 clock controller patch-se
From: Jaehoon Chung
This patch adds MSHC (Mobile Storage Host Controller) dt node for Exynos5433
SoC. MSHC is an interface between the system the SD/MMC card.
Cc: Kukjin Kim
Cc: Mark Rutland
Cc: Marc Zyngier
Cc: Arnd Bergmann
Cc: Olof Johansson
Cc: Catalin Marinas
Cc: Will Deacon
Signed-o
This patch adds the thermal-zones devicetree node for Exynos5433 SoC.
The thermal-zones has five thermal-zones and then each thermal-zone contains
each thermal-sensor to monitor the temperature of own IP. The {atlas0|apollo}_
thermal zone have the eight trip-points for interrupt method to detect th
From: Inha Song
This patch adds ADMA (Advanced DMA) device tree node for Exynos5433 SoC.
In Exynos5433 SoC, ADMA is used for I2S audio interface.
Cc: Kukjin Kim
Signed-off-by: Inha Song
Acked-by: Inki Dae
---
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 11 +++
1 file changed, 11 ins
Hi, Mel,
On Sat, 2015-02-28 at 15:30 +0800, Huang Ying wrote:
> On Sat, 2015-02-28 at 01:46 +, Mel Gorman wrote:
> > On Fri, Feb 27, 2015 at 03:21:36PM +0800, Huang Ying wrote:
> > > FYI, we noticed the below changes on
> > >
> > > git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.
From: Igal Liberman
Signed-off-by: Igal Liberman
---
drivers/soc/fsl/fman/Kconfig| 6 +
drivers/soc/fsl/fman/Makefile | 1 +
drivers/soc/fsl/fman/rtc/Makefile | 13 ++
drivers/soc/fsl/fman/rtc/fman_rtc.c | 354
4 files changed, 374 inser
From: Igal Liberman
Signed-off-by: Igal Liberman
---
drivers/soc/fsl/fman/Kconfig| 6 +
drivers/soc/fsl/fman/Makefile | 1 +
drivers/soc/fsl/fman/pcd/Makefile | 13 +
drivers/soc/fsl/fman/pcd/fman_kg.c | 850
drivers/soc/fsl/fman/pcd/fm
From: Igal Liberman
Signed-off-by: Igal Liberman
---
drivers/soc/Kconfig |1 +
drivers/soc/Makefile |1 +
drivers/soc/fsl/Kconfig |1 +
drivers/soc/fsl/Makefile |1 +
drivers/soc/fsl/fman/Kconfig |7 +
drivers/soc/fsl/fman/Makefile | 13 +
dr
From: Igal Liberman
Signed-off-by: Igal Liberman
---
drivers/soc/fsl/fman/Kconfig | 10 +
drivers/soc/fsl/fman/Makefile |2 +
drivers/soc/fsl/fman/port/Makefile| 13 +
drivers/soc/fsl/fman/port/fman_port.c | 1536 +
4 files changed, 1
From: Igal Liberman
Signed-off-by: Igal Liberman
---
drivers/soc/fsl/fman/Kconfig | 6 +
drivers/soc/fsl/fman/Makefile | 7 +-
drivers/soc/fsl/fman/mac/Makefile | 15 +
drivers/soc/fsl/fman/mac/fman_crc32.c | 117
drivers/soc/fsl/fm
From: Igal Liberman
Signed-off-by: Igal Liberman
---
drivers/soc/fsl/fman/Makefile | 1 +
drivers/soc/fsl/fman/sp/Makefile | 13 +++
drivers/soc/fsl/fman/sp/fman_sp.c | 204 ++
3 files changed, 218 insertions(+)
create mode 100644 drivers/soc/fsl/fma
On (03/04/15 14:02), a...@linux-foundation.org wrote:
> +What:/sys/block/zram/compact
> +Date:August 2015
> +Contact: Minchan Kim
> +Description:
> + The compact file is write-only and trigger compaction for
> + allocator zrm uses. The al
If the inode is valid and the page has been read in,
then we can follow a link in RCU-walk.
Signed-off-by: NeilBrown
---
fs/nfs/inode.c | 22 ++
fs/nfs/symlink.c | 19 +--
include/linux/nfs_fs.h |1 +
3 files changed, 40 insertions(+), 2
Currently following a symlink never uses rcu-walk, so
terminate_walk isn't needed.
That will change in a future patch. In preparation, change
some
path_put_condtional()
path_put()
sequences to
path_to_nameidata()
terminate_walk()
These sequence are identical when in ref-walk, and correct
If LOOKUP_RCU is set, follow_link will not take/drop reference counts.
Replace cond_resched() with _cond_resched() as the latter
is a no-op if rcu_read_lock() is held while the former will
give a warning in that case.
Signed-off-by: NeilBrown
---
fs/namei.c | 19 +--
1 file ch
touch_atime is not RCU-safe, and so cannot be called on an
RCU walk.
However in situations where RCU-walk makes a difference,
the symlink will likely to accessed much more often than
it is useful to update the atime.
So split out the test of "Does the atime actually need to be updated"
into atime
If LOOKUP_RCU is set, use GFP_ATOMIC rather than GFP_KERNEL,
and try to get the ilock without blocking.
When these succeed, follow_link() can succeed without dropping
out of RCU-walk.
Signed-off-by: NeilBrown
---
fs/xfs/xfs_ioctl.c |2 +-
fs/xfs/xfs_iops.c| 15 ++-
fs/xf
Now that follow_link handles LOOKUP_RCU, we do not need to
'unlazy_walk' when a symlink is found.
Signed-off-by: NeilBrown
---
fs/namei.c | 12
1 file changed, 12 deletions(-)
diff --git a/fs/namei.c b/fs/namei.c
index 4ddbc1ef5726..11e6b2068c96 100644
--- a/fs/namei.c
+++ b/fs/n
If the symlink has already be been read-in, then
page_follow_link_light can succeed in RCU-walk mode.
page_getlink_rcu() is added to support this.
With this many filesystems can follow links in RCU-walk
mode when everything is cached. This includes ext?fs and
others.
If the page is a HighMem pa
When we support ->follow_link in RCU-walk we will not want to
take a reference to the 'struct path *link' passed to follow_link,
and correspondingly will not want to drop that reference.
As link_path_walk will complete_walk() in the case of an error,
and as complete_walk() will clear LOOKUP_RCU, w
Hi Al (and others),
I wonder if you could look over this patchset.
It allows RCU-walk to follow symlinks in many common cases,
thus removing a surprising performance hit caused by using symlinks.
The last could of patches make changes to XFS and NFS to support
this but I haven't forwarded to
In preparation for supporting ->follow_link in RCU-walk,
make sure all ->follow_link handers which are not atomic
will fail if LOOKUP_RCU is set.
Later patches will make some of these handle LOOKUP_RCU
more gracefully.
This is current achieved by introducing a new function
"nd_is_rcu" to check if
Hello Minchan,
Nice work!
On 03/04/2015 02:01 PM, Minchan Kim wrote:
> +static void putback_zspage(struct zs_pool *pool, struct size_class *class,
> + struct page *first_page)
> +{
> + int class_idx;
> + enum fullness_group fullness;
> +
> + BUG_ON(!is_firs
Hi,
I'm seeing "NOHZ: local_softirq_pending" warnings with 3.14.31-rt28
(3.14.3-rt4 too). They're mostly "NOHZ: local_softirq_pending 08"
(NET_RX) but they happen occasionally for other softirqs too (0c aka
NET_RX and NET_TX is second-most common). CONFIG_PREEMPT_RT_FULL and
CONFIG_NO_HZ_FULL(_ALL
According to i.MX6 Series Reference Manual, the formula to calculate
the sys clock is
sysclk rate = bclk rate * (div2 + 1) * (7 * psr + 1) * (pm + 1) * 2
Commit aafa85e71a75 ("ASoC: fsl_ssi: Add DAI master mode support for
SSI on i.MX series") added the divisor calculation which relies on
the clk
From: Stephen Rothwell
Date: Thu, 5 Mar 2015 13:42:47 +1100
> From: Stephen Rothwell
> Date: Thu, 5 Mar 2015 13:37:05 +1100
> Subject: [PATCH] mpls: using vzalloc requires including vmalloc.h
>
> Fixes this build error:
>
> net/mpls/af_mpls.c: In function 'resize_platform_label_table':
> net/m
Hi Linus,
>>> +#include
>>> +#include
>>> +#include
>>> +#include
>>> +#include
>>> +#include
>>
>> This should be:
>> #include
In fact, just by trying it out I found I need linux/gpio.h for APIs like
gpiochip_add_pin_range, and etc.
>>
>>
>
> Great! I will address all comments and re-se
On 5 March 2015 at 10:06, Rahul Khandelwal (Rahul Khandelwal)
wrote:
> Hello Viresh,
>
> Thank you for your reply and the information. :)
>
> I have created the patch using the "diff -up" command, I think this way
> should be used to create patches as mentioned in
> Documentation/SubmittingPatch
Hi Andrew,
After merging the akpm-current tree, today's linux-next build (bfin
TCM-BF537_defconfig and many others) failed like this:
(.init.text+0x5f8): undefined reference to `ioremap_huge_init'
Caused by commit 45eaed3ec431 ("lib/ioremap.c: add huge I/O map
capability interfaces"). lib/ioremp
On Thu, Mar 05, 2015 at 04:34:02AM +0800, kbuild test robot wrote:
> drivers/thermal/cpu_cooling.c:463:18-24: WARNING: PTR_ERR_OR_ZERO can be used
>
>
> Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
>
> Generated by: scripts/coccinelle/api/ptr_ret.cocci
>
> CC: Javi Merino
> Signe
On 03/02/2015 08:23 PM, Peter Zijlstra wrote:
> On Thu, Feb 26, 2015 at 08:52:02AM +0530, Preeti U Murthy wrote:
>> The hrtimer mode of broadcast queues hrtimers in the idle entry
>> path so as to wakeup cpus in deep idle states.
>
> Callgraph please...
cpuidle_idle_call()
| clockevents_not
Hello Viresh,
Thank you for your reply and the information. :)
I have created the patch using the "diff -up" command, I think this way should
be used to create patches as mentioned in Documentation/SubmittingPatches..
Could you please help me to know whether any kernel release using interactiv
Hi Arnaldo, Ingo,
What happened with this pull request? I already
see in v4.0-rc2 changes additions to one requested
by this pull request, but I don't see this series itself.
For example e370a3d57664cd5e39c0b95d157ebc841b568409
"perf symbols: Define EM_AARCH64 for older OSes" by David
is already
On 03/02/2015 08:26 PM, Peter Zijlstra wrote:
> On Fri, Feb 27, 2015 at 02:19:05PM +0530, Preeti U Murthy wrote:
>> The problem reported in the changelog of this patch is causing severe
>> regressions very frequently on our machines for certain usecases. It would
>> help to put in a fix in place fi
Hi,
This series adds the mach-omap2 code for the wkup_m3_rproc driver
submitted here [1]. pdata-quirks patch requires the pdata added with
patch 3 of the aforementioned series. The dt patch was previously
included as part of the rproc series here [2]. Changes are:
v1->v2:
-Because the firmware lo
Signed-off-by: Suman Anna
Signed-off-by: Dave Gerlach
---
arch/arm/boot/dts/am33xx.dtsi | 21 +
1 file changed, 13 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index acd3705..086415c 100644
--- a/arch/arm/boot/dts/a
Use pdata-quirks to provide platform data required for reset
of the wkup_m3 during boot.
Signed-off-by: Dave Gerlach
---
This patch requires the pdata introduced in this patch:
https://www.mail-archive.com/linux-omap@vger.kernel.org/msg114622.html
arch/arm/mach-omap2/pdata-quirks.c | 13 +++
On 03/04/2015 09:14 PM, "Stéphane Viau" wrote:
Hi,
Hi Archit,
On 03/04/2015 12:06 AM, Stephane Viau wrote:
Up until now, we assume that eDP is tight to intf_0 and HDMI to
intf_3. This information shall actually come from the mdp5_cfg
module since it can change from one chip to another.
Si
On 5 March 2015 at 09:02, Pi-Cheng Chen wrote:
> In the case of Mediatek SoC, the intermediate frequency might not be one entry
> of OPP table. To elaborate, the source clock node of the CPUs/Cluster on
> Mediatek SoC is a mux. The mux has several PLLs as parents. When we are
> doing CPU frequency
Hi,
This patch series is version two of the series to add a
wkup_m3_rproc driver for TI AM335x SoCs. This family of SoCs
contains an ARM Cortex M3 coprocessor that is responsible for
low-level power tasks that cannot be handled by the main ARM
Cortex A8 so firmware running from the CM3 can be used
Add a remoteproc driver to load the firmware for and boot the wkup_m3
present on am33xx and am43xx. The wkup_m3 is an integrated Cortex M3
that allows the SoC to enter the lowest possible power state by taking
control from the MPU after it has gone into its own low power state and
shutting off any
Add the device tree bindings document for ti,am3353-wkup-m3 which is
used by the wkup_m3_rproc driver.
Signed-off-by: Dave Gerlach
---
.../bindings/remoteproc/wkup_m3_rproc.txt | 46 ++
1 file changed, 46 insertions(+)
create mode 100644
Documentation/devicetree/bi
From: Suman Anna
The rproc_da_to_va API is currently used to perform any device to
kernel address translations to meet the different needs of the remoteproc
core/drivers (eg: loading). The functionality is achieved within the
remoteproc core, and is limited only for carveouts allocated within the
> -Original Message-
> From: Konrad Rzeszutek Wilk [mailto:konrad.w...@oracle.com]
> Sent: Thursday, March 5, 2015 3:43 AM
> To: Wang, Xiaoming
> Cc: ch...@chris-wilson.co.uk; david.vra...@citrix.com;
> lau...@codeaurora.org; heiko.carst...@de.ibm.com; li...@horizon.com;
> l...@aserp2030.o
On 03/04/2015 07:02 PM, Ingo Molnar wrote:
> * Andrew Morton wrote:
>
>> On Fri, 27 Feb 2015 17:01:32 -0500 Jason Baron wrote:
>>
I don't really understand the need for rotation/round-robin. We can
solve the thundering herd via exclusive wakeups, but what is the point
in choosing
Hi all,
Changes since 20150304:
The net-next tree gained a build failure for which I applied a patch.
The md tree lost its build failure.
The mfd tree lost its build failure.
The clk tree lost its build failure.
Non-merge commits (relative to Linus' tree): 2570
2666 files changed,
Hi Viresh,
Thanks for reviewing. Please see my reply below:
On 4 March 2015 at 18:15, Viresh Kumar wrote:
> On 4 March 2015 at 14:19, pi-cheng.chen wrote:
>> In this patch, CPU clock/power domain information is added into the
>> platform_data of cpufreq-dt so that cpufreq-dt driver could check
On Wed, Mar 4, 2015 at 6:58 PM, joeyli wrote:
>
> After 84c91b7ae merged to v3.17 kernel, hibernate code checks the e280 regions
> should not be changed when doing hibernate resume. Without your patch 8,
> the hibernate resume checking will randomly fail on the machines that reserved
> setup_data
Hi,
Happy New Year,
Am Miss Noleta Voss, I will so much appreciate your kind reply for i have some
thing very important to talk with
you...kindly reply me
Yours Noleta Voss
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message
Hi Yinghai,
On Wed, Mar 04, 2015 at 10:12:58AM -0800, Yinghai Lu wrote:
> On Wed, Mar 4, 2015 at 7:54 AM, Jiri Kosina wrote:
>
> >
> > Also this 15-patch series needs to be separated into two patchsets. The
> > whole series is not appropriate for -rc3, but this particular one at least
> > is a r
1 - 100 of 1215 matches
Mail list logo