Meelis Roos writes:
> > > Just got this on bootup of my Sun T2000:
> > >...
> > > I have not seen it before, this includes 4.6.0 4.6.0-08907-g7639dad
> > > 4.7.0-rc1-00094-g6b15d66 4.7.0-rc4-00014-g67016f6.
> > >
> > > It is not reproducible, did not appear on next reboot of the same
> > >
Meelis Roos writes:
> > > Just got this on bootup of my Sun T2000:
> > >...
> > > I have not seen it before, this includes 4.6.0 4.6.0-08907-g7639dad
> > > 4.7.0-rc1-00094-g6b15d66 4.7.0-rc4-00014-g67016f6.
> > >
> > > It is not reproducible, did not appear on next reboot of the same
> > >
Add support for the PWM controller found in the Amlogic SoCs.
This driver supports the Meson8b and GXBB SoCs.
Signed-off-by: Neil Armstrong
---
drivers/pwm/Kconfig | 9 +
drivers/pwm/Makefile| 1 +
drivers/pwm/pwm-meson.c | 491
Add support for the PWM controller found in the Amlogic SoCs.
This driver supports the Meson8b and GXBB SoCs.
Signed-off-by: Neil Armstrong
---
drivers/pwm/Kconfig | 9 +
drivers/pwm/Makefile| 1 +
drivers/pwm/pwm-meson.c | 491
3
Add bindings for the Amlogic PWM Controller in Meson8b and GXBB SoCs.
Signed-off-by: Neil Armstrong
---
Documentation/devicetree/bindings/pwm/pwm-meson.txt | 21 +
1 file changed, 21 insertions(+)
create mode 100644
Add bindings for the Amlogic PWM Controller in Meson8b and GXBB SoCs.
Signed-off-by: Neil Armstrong
---
Documentation/devicetree/bindings/pwm/pwm-meson.txt | 21 +
1 file changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/pwm-meson.txt
diff
Signed-off-by: Neil Armstrong
---
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 28
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index
Signed-off-by: Neil Armstrong
---
arch/arm/boot/dts/meson8b.dtsi | 21 +
1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index fc4080d..41fd536 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
Signed-off-by: Neil Armstrong
---
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 28
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 806b903..2eacef0 100644
---
Signed-off-by: Neil Armstrong
---
arch/arm/boot/dts/meson8b.dtsi | 21 +
1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index fc4080d..41fd536 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++
Subject: [PATCH v2 0/4] pwm: Add Amlogic Meson SoC PWM Controller
Add support for the PWM controller found in Amlogic Meson SoCs.
This controller provides a dual PWM output with 4 selectable clock source
and a two level divider to achieve a better PWM range.
Currently Meson8b and GXBB SoCs are
Subject: [PATCH v2 0/4] pwm: Add Amlogic Meson SoC PWM Controller
Add support for the PWM controller found in Amlogic Meson SoCs.
This controller provides a dual PWM output with 4 selectable clock source
and a two level divider to achieve a better PWM range.
Currently Meson8b and GXBB SoCs are
* PaX Team wrote:
> On 9 Jul 2016 at 14:27, Andy Lutomirski wrote:
>
> > I like the series, but I have one minor nit to pick. The effect of this
> > series is to harden usercopy, but most of the code is really about
> > infrastructure to validate that a pointed-to
* PaX Team wrote:
> On 9 Jul 2016 at 14:27, Andy Lutomirski wrote:
>
> > I like the series, but I have one minor nit to pick. The effect of this
> > series is to harden usercopy, but most of the code is really about
> > infrastructure to validate that a pointed-to object is valid.
>
>
Given a Kconfig.sample, implementing 2 empty and 2 non-empty menu
entries:
menu EMPTY_MENU
endmenu
menu NONEMPTY_MENU
config DUMMY_1
bool "desc-1"
endmenu
menuconfig EMPTY_MENUCONFIG
bool "desc-2"
menuconfig NONEMPTY_MENUCONFIG
bool "desc-3"
if NONEMPTY_MENUCONFIG
config DUMMY_2
Given a Kconfig.sample, implementing 2 empty and 2 non-empty menu
entries:
menu EMPTY_MENU
endmenu
menu NONEMPTY_MENU
config DUMMY_1
bool "desc-1"
endmenu
menuconfig EMPTY_MENUCONFIG
bool "desc-2"
menuconfig NONEMPTY_MENUCONFIG
bool "desc-3"
if NONEMPTY_MENUCONFIG
config DUMMY_2
Op 08-07-16 om 17:44 schreef Gustavo Padovan:
> From: Gustavo Padovan
>
> Signalling doesn't need to be enabled at sync_file creation, it is only
> required if userspace waiting the fence to signal through poll().
>
> Thus we delay fence_add_callback() until poll
Op 08-07-16 om 17:44 schreef Gustavo Padovan:
> From: Gustavo Padovan
>
> Signalling doesn't need to be enabled at sync_file creation, it is only
> required if userspace waiting the fence to signal through poll().
>
> Thus we delay fence_add_callback() until poll is called. It only adds the
>
Signed-off-by: Neil Armstrong
---
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 6 ++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 832815d..bcca82f 100644
---
Signed-off-by: Neil Armstrong
---
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 6 ++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 832815d..bcca82f 100644
---
Adds support for the Amlogic Meson GXBB SoC Watchdog Timer.
It differs from the meson6/meson8b HW, so need for a separate driver.
The HW provides a divider capable of having a 1ms timebase thus simplifying
the counter update.
The restart call is not provided even if the HW is capable of triggering
Adds support for the Amlogic Meson GXBB SoC Watchdog Timer.
It differs from the meson6/meson8b HW, so need for a separate driver.
The HW provides a divider capable of having a 1ms timebase thus simplifying
the counter update.
The restart call is not provided even if the HW is capable of triggering
Acked-by: Rob Herring
Signed-off-by: Neil Armstrong
---
.../devicetree/bindings/watchdog/meson-gxbb-wdt.txt | 16
1 file changed, 16 insertions(+)
create mode 100644
Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
Acked-by: Rob Herring
Signed-off-by: Neil Armstrong
---
.../devicetree/bindings/watchdog/meson-gxbb-wdt.txt | 16
1 file changed, 16 insertions(+)
create mode 100644
Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
diff --git
Add watchdog specific driver for Amlogic Meson GXBB SoC.
Signed-off-by: Neil Armstrong
---
drivers/watchdog/Kconfig | 10 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/meson_gxbb_wdt.c | 270 ++
3 files
Add watchdog specific driver for Amlogic Meson GXBB SoC.
Signed-off-by: Neil Armstrong
---
drivers/watchdog/Kconfig | 10 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/meson_gxbb_wdt.c | 270 ++
3 files changed, 281 insertions(+)
Hi Ingo,
I am sorry the previous post didn't contain formal patch log. I made a
new one as below. The boot crash could not only happen with certain
memory. Because of this code bug the regions which need be avoided like
the zipped kernel with its unzipping running code, initrd, kernel
command
Hi Ingo,
I am sorry the previous post didn't contain formal patch log. I made a
new one as below. The boot crash could not only happen with certain
memory. Because of this code bug the regions which need be avoided like
the zipped kernel with its unzipping running code, initrd, kernel
command
On Sat, Jul 09, 2016 at 12:25:09AM +0200, Peter Zijlstra wrote:
> On Sat, Jul 09, 2016 at 12:00:47AM +0200, Peter Zijlstra wrote:
> > Yes, you're right. Let me try and see if I can make that better.
>
> Something like so?
yep, seems good ;-)
jirka
>
> ---
> --- a/arch/x86/events/intel/ds.c
>
On Sat, Jul 09, 2016 at 12:25:09AM +0200, Peter Zijlstra wrote:
> On Sat, Jul 09, 2016 at 12:00:47AM +0200, Peter Zijlstra wrote:
> > Yes, you're right. Let me try and see if I can make that better.
>
> Something like so?
yep, seems good ;-)
jirka
>
> ---
> --- a/arch/x86/events/intel/ds.c
>
On 07/08/16 09:13, Petr Mladek wrote:
> On Thu 2016-07-07 20:27:13, Topi Miettinen wrote:
>> On 07/07/16 09:16, Petr Mladek wrote:
>>> On Sun 2016-07-03 15:08:07, Topi Miettinen wrote:
The attached patch would make any uses of capabilities generate audit
messages. It works for simple
On 07/08/16 09:13, Petr Mladek wrote:
> On Thu 2016-07-07 20:27:13, Topi Miettinen wrote:
>> On 07/07/16 09:16, Petr Mladek wrote:
>>> On Sun 2016-07-03 15:08:07, Topi Miettinen wrote:
The attached patch would make any uses of capabilities generate audit
messages. It works for simple
On Sat, Jul 9, 2016 at 10:53 PM, Tejun Heo wrote:
> Hello, Ming.
>
> On Fri, Jul 08, 2016 at 06:35:06PM +0800, Ming Lei wrote:
>> I am wondering why REQ_THROTTLED is cleared for the original bio
>> even it has been charged and will be issued to driver, and is it allowed
>> to
On Sat, Jul 9, 2016 at 10:53 PM, Tejun Heo wrote:
> Hello, Ming.
>
> On Fri, Jul 08, 2016 at 06:35:06PM +0800, Ming Lei wrote:
>> I am wondering why REQ_THROTTLED is cleared for the original bio
>> even it has been charged and will be issued to driver, and is it allowed
>> to throttle and charge
Add support for using with both wl12xx and wl18xx.
- all wilink family needs special init command for entering wspi mode.
extra clock cycles should be sent after the spi init command while the
cs pin is high.
- Use inverted chip select for sending a dummy 4 bytes command that
completes the
Add support for using with both wl12xx and wl18xx.
- all wilink family needs special init command for entering wspi mode.
extra clock cycles should be sent after the spi init command while the
cs pin is high.
- Use inverted chip select for sending a dummy 4 bytes command that
completes the
On Sun, 2016-07-10 at 08:49 +0200, Borislav Petkov wrote:
> On Sat, Jul 09, 2016 at 10:56:55AM -0700, Joe Perches wrote:
> >
> > defconfigs both with and without CONFIG_PRINTK build
> > properly with the proposed change to this specific patch.
> Did you try latest tip/master?
Assuming tip is
On Sun, 2016-07-10 at 08:49 +0200, Borislav Petkov wrote:
> On Sat, Jul 09, 2016 at 10:56:55AM -0700, Joe Perches wrote:
> >
> > defconfigs both with and without CONFIG_PRINTK build
> > properly with the proposed change to this specific patch.
> Did you try latest tip/master?
Assuming tip is
Add nuc970_defconfig file support.
Signed-off-by: Wan Zongshun
---
arch/arm/configs/nuc970_defconfig | 76 +++
1 file changed, 76 insertions(+)
create mode 100644 arch/arm/configs/nuc970_defconfig
diff --git
Add nuc970_defconfig file support.
Signed-off-by: Wan Zongshun
---
arch/arm/configs/nuc970_defconfig | 76 +++
1 file changed, 76 insertions(+)
create mode 100644 arch/arm/configs/nuc970_defconfig
diff --git a/arch/arm/configs/nuc970_defconfig
This patch is to add dts description for nuc900 platform.
Signed-off-by: Wan Zongshun
---
.../devicetree/bindings/arm/nuvoton/nuc970.txt | 12
.../bindings/clock/nuvoton,nuc970-clk.txt | 13 +
This patch is to add dts support for nuc970 platform.
Signed-off-by: Wan Zongshun
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/nuc970-evb.dts | 34
arch/arm/boot/dts/nuc970.dtsi| 88
3 files
This patch is to add dts description for nuc900 platform.
Signed-off-by: Wan Zongshun
---
.../devicetree/bindings/arm/nuvoton/nuc970.txt | 12
.../bindings/clock/nuvoton,nuc970-clk.txt | 13 +
.../interrupt-controller/nuvoton,nuc900-aic.txt| 15
This patch is to add dts support for nuc970 platform.
Signed-off-by: Wan Zongshun
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/nuc970-evb.dts | 34
arch/arm/boot/dts/nuc970.dtsi| 88
3 files changed, 123
This patch is to add clock framework driver for nuc970.
The clock controller generates all clocks for Video, Audio,
CPU, system bus and all functionalities, nuc970 includes
two PLL modules.
Signed-off-by: Wan Zongshun
---
drivers/clk/Makefile| 1 +
This patch is to add clock framework driver for nuc970.
The clock controller generates all clocks for Video, Audio,
CPU, system bus and all functionalities, nuc970 includes
two PLL modules.
Signed-off-by: Wan Zongshun
---
drivers/clk/Makefile| 1 +
drivers/clk/nuc900/Makefile
Hi,
This patch series added Nuvoton new SoC NUC970 development board
support, this nuc970 belongs to nuc900 series, but many features are
not compatible with old nuc900 SoCs like nuc910, nuc920.
Those patches are basing on old w90x900 codes, and are using standard
linux subsystem interface, such
Hi,
This patch series added Nuvoton new SoC NUC970 development board
support, this nuc970 belongs to nuc900 series, but many features are
not compatible with old nuc900 SoCs like nuc910, nuc920.
Those patches are basing on old w90x900 codes, and are using standard
linux subsystem interface, such
This patch is to add SoC specific driver for nuc970 SoC,
it is for getting nuc970 version id and chip id.
Signed-off-by: Wan Zongshun
---
drivers/soc/Kconfig | 1 +
drivers/soc/Makefile | 1 +
drivers/soc/nuvoton/Kconfig | 10
This patch is to add nuc970 clocksource driver support.
NUC970 general timer controller includes five channels, TIMER0, TIMER1,
TIMER2, TIMER3, and TIMER4, which allow user to easily implement a
counting scheme or timing control for applications.The timer possesses
features such as adjustable
NUC970 is a new SoC of Nuvoton nuc900 series, this patch is
to add machine file support for it.
Signed-off-by: Wan Zongshun
---
arch/arm/mach-w90x900/Kconfig | 20
arch/arm/mach-w90x900/Makefile | 3 +++
arch/arm/mach-w90x900/nuc900.c | 41
This patch is to add SoC specific driver for nuc970 SoC,
it is for getting nuc970 version id and chip id.
Signed-off-by: Wan Zongshun
---
drivers/soc/Kconfig | 1 +
drivers/soc/Makefile | 1 +
drivers/soc/nuvoton/Kconfig | 10
drivers/soc/nuvoton/Makefile
This patch is to add nuc970 clocksource driver support.
NUC970 general timer controller includes five channels, TIMER0, TIMER1,
TIMER2, TIMER3, and TIMER4, which allow user to easily implement a
counting scheme or timing control for applications.The timer possesses
features such as adjustable
NUC970 is a new SoC of Nuvoton nuc900 series, this patch is
to add machine file support for it.
Signed-off-by: Wan Zongshun
---
arch/arm/mach-w90x900/Kconfig | 20
arch/arm/mach-w90x900/Makefile | 3 +++
arch/arm/mach-w90x900/nuc900.c | 41
This patch is to add irqchip driver support for nuc900 plat,
current this driver only supports nuc970 SoC.
Signed-off-by: Wan Zongshun
---
arch/arm/mach-w90x900/include/mach/irqs.h | 5 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-nuc900.c
This driver is to add reset support for nuc900 series,
currently, it only supports nuc970 SoC reset.
Signed-off-by: Wan Zongshun
---
drivers/power/reset/Kconfig| 7 +++
drivers/power/reset/Makefile | 1 +
drivers/power/reset/nuc900-reset.c | 93
This patch is to add nuc970 clock Macros header file
into include/dt-bindings/clock.
Signed-off-by: Wan Zongshun
---
include/dt-bindings/clock/nuc970-clock.h | 233 +++
1 file changed, 233 insertions(+)
create mode 100644
This driver is to add reset support for nuc900 series,
currently, it only supports nuc970 SoC reset.
Signed-off-by: Wan Zongshun
---
drivers/power/reset/Kconfig| 7 +++
drivers/power/reset/Makefile | 1 +
drivers/power/reset/nuc900-reset.c | 93
This patch is to add nuc970 clock Macros header file
into include/dt-bindings/clock.
Signed-off-by: Wan Zongshun
---
include/dt-bindings/clock/nuc970-clock.h | 233 +++
1 file changed, 233 insertions(+)
create mode 100644 include/dt-bindings/clock/nuc970-clock.h
This patch is to add irqchip driver support for nuc900 plat,
current this driver only supports nuc970 SoC.
Signed-off-by: Wan Zongshun
---
arch/arm/mach-w90x900/include/mach/irqs.h | 5 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-nuc900.c | 150
> "Alexey" == Alexey Brodkin writes:
Alexey> Hi Aaron,
Alexey> On Sat, 2016-07-09 at 07:47 -0400, Aaron Z wrote:
>> On Sat, Jul 9, 2016 at 4:37 AM, Alexey Brodkin
>> wrote:
>> >
>> > Hello,
>> >
>> > I was playing with quite simple
> "Alexey" == Alexey Brodkin writes:
Alexey> Hi Aaron,
Alexey> On Sat, 2016-07-09 at 07:47 -0400, Aaron Z wrote:
>> On Sat, Jul 9, 2016 at 4:37 AM, Alexey Brodkin
>> wrote:
>> >
>> > Hello,
>> >
>> > I was playing with quite simple bridged setup on different boards
>> with > very recent
On Sat, Jul 09, 2016 at 10:56:55AM -0700, Joe Perches wrote:
> defconfigs both with and without CONFIG_PRINTK build
> properly with the proposed change to this specific patch.
Did you try latest tip/master?
> Borislav, your delightful personality always impresses.
> Never change.
What goes
On Sat, Jul 09, 2016 at 10:56:55AM -0700, Joe Perches wrote:
> defconfigs both with and without CONFIG_PRINTK build
> properly with the proposed change to this specific patch.
Did you try latest tip/master?
> Borislav, your delightful personality always impresses.
> Never change.
What goes
Sunrise Point PCH with SPS Firmware doesn't expose working
MEI interface, we need to quirk it out.
Cc: #4.4+
Signed-off-by: Tomas Winkler
---
drivers/misc/mei/pci-me.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
Sunrise Point PCH with SPS Firmware doesn't expose working
MEI interface, we need to quirk it out.
Cc: #4.4+
Signed-off-by: Tomas Winkler
---
drivers/misc/mei/pci-me.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
401 - 466 of 466 matches
Mail list logo