tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
master
head: b29482fde649c72441d5478a4ea2c52c56d97a5e
commit: e83f195aa45c1ffd73b3a950a887e41c260cf194 RDMA/cm: Pull duplicated code
into cm_queue_work_unlock()
date: 4 weeks ago
config: sh-randconfig-s032-20200611
On 6/11/20 4:06 AM, Abhishek Pandit-Subedi wrote:
> Veyron Jaq and Mighty both use the Marvel 8897 WiFi+BT chip. Add wakeup
> and pinctrl block to devicetree so the btmrvl driver can correctly
> configure the wakeup interrupt.
>
> Signed-off-by: Abhishek Pandit-Subedi
> Reviewed-by: Reviewed-by:
Le 11/06/2020 à 05:41, Chris Packham a écrit :
Since commit cbe46bd4f510 ("powerpc: remove CONFIG_CMDLINE #ifdef mess")
CONFIG_CMDLINE has always had a value regardless of CONFIG_CMDLINE_BOOL.
For example:
$ make ARCH=powerpc defconfig
$ cat .config
# CONFIG_CMDLINE_BOOL is not set
Implemented ECC correctable and uncorrectable error handling for EDU
reads. If ECC correctable bitflips are encountered on EDU transfer,
read page again using pio, This is needed due to a controller lmitation
where read and corrected data is not transferred to the DMA buffer on ECC
errors. This
When flash-dma is absent do not default to using flash-edu.
Make sure flash-edu is enabled before setting EDU transfer
function.
Fixes: a5d53ad26a8b ("mtd: rawnand: brcmnand: Add support for flash-edu for dma
transfers")
Signed-off-by: Kamal Dasu
---
drivers/mtd/nand/raw/brcmnand/brcmnand.c |
On Wed, Jun 10, 2020 at 11:31:16PM +, Luis Chamberlain wrote:
> On Wed, Jun 10, 2020 at 09:52:13PM +, Luis Chamberlain wrote:
> > diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
> > index 7ff2ea5cd05e..5cea04c05e09 100644
> > --- a/kernel/trace/blktrace.c
> > +++
On Wed, Jun 10, 2020 at 03:09:42PM +0200, Jerome Brunet wrote:
>
> On Wed 10 Jun 2020 at 06:13, hhk7...@gmail.com wrote:
>
> > From: Hyeonki Hong
> >
> > If a GPIO bank has greater than 16 pins, PAD_DS_REG is split into two
> > registers. However, when register and bit were calculated, the
NETWORKING_BLOCK_COMMENT_STYLE is supported by checkpatch but there
doesn't seem to be any check for the standard block comment style.
Add support for NONNETWORKING_BLOCK_COMMENT_STYLE to check for empty /*
on first line of non-networking block comments.
Signed-off-by: Scott Branden
---
Changes
On Wed, Jun 10, 2020 at 01:06:58PM -0700, Kyung Min Park wrote:
> This RFC series has been reviewed by Dave Hansen.
Then why isn't there a "Reviewed-by:" line with his name on it on the
patches?
Come on, you all know how to do this properly...
Hi Linus,
Please pull the m68knommu changes for v5.8.
Regards
Greg
The following changes since commit 9cb1fd0efd195590b828b9b865421ad345a4a145:
Linux 5.7-rc7 (2020-05-24 15:32:54 -0700)
are available in the Git repository at:
The UFS load calculation is based on "total_time" and "busy_time" in a
devfreq window. However, the source of time is different for both
parameters: "busy_time" is assigned from "jiffies" thus has different
accuracy from "total_time" which is assigned from ktime_get().
Besides, the time of window
On Thu, Jun 11, 2020 at 11:01:38AM +0800, yukuai (C) wrote:
> On 2020/6/11 10:28, Dave Chinner wrote
> > Actually, it's a lot simpler:
> >
> > thread1 thread2
> >
> > __xfs_trans_commit
> > xfs_log_commit_cil
> >xlog_wait
> > schedule
> >
Add SPI_CONTROLLER_FALLBACK to fallback to pio mode in case dma transfer
failed.
If spi client driver want to enable this feature please set master->flags
with SPI_MASTER_FALLBACK and add master->fallback checking in its can_dma()
as spi-imx.c
Signed-off-by: Robin Gong
---
drivers/spi/spi.c
Add fallback pio feature for dma transfer failed. Since another whole
pio transfer including setup_transfer will be issued by spi core, no
need to restore jobs like commit bcd8e7761ec9 ("spi: imx: fallback to PIO
if dma setup failure").
Signed-off-by: Robin Gong
---
drivers/spi/spi-imx.c | 23
Introudce fallback pio way at spi core level so that the tx/rx buffer
mapped by spi core for dma could be unmap and fallback pio again. Hence no
need the below patch where 'dma_sync_sg_for_devic' to sync fresh data back
into 'device' memory and sync to 'cpu' again in spi core.
tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
master
head: b29482fde649c72441d5478a4ea2c52c56d97a5e
commit: 6482023b9d3350bf1b756ef36e1ea1a1c871879c crypto: marvell - enable
OcteonTX cpt options for build
date: 3 months ago
config: s390-randconfig-s032-20200611
On Thu, Jun 04, 2020 at 01:41:07PM +0200, Jiri Kosina wrote:
> On Tue, 2 Jun 2020, Andrey Konovalov wrote:
>
> > > Hello,
> > >
> > > syzbot found the following crash on:
> > >
> > > HEAD commit:b0c3ba31 Merge tag 'fsnotify_for_v5.7-rc8' of
> > > git://git.ke..
> > > git tree: upstream
Hello,
syzbot found the following crash on:
HEAD commit:7ae77150 Merge tag 'powerpc-5.8-1' of git://git.kernel.org..
git tree: upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=150f296110
kernel config: https://syzkaller.appspot.com/x/.config?x=d195fe572fb15312
tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
master
head: b29482fde649c72441d5478a4ea2c52c56d97a5e
commit: ab93a4bc955b3980c699430bc0b633f0d8b607be sched/fair: Remove
distribute_running from CFS bandwidth
date: 6 weeks ago
config: arm64-randconfig-s032-20200611
On Wed 10 Jun 02:40 PDT 2020, Paul Cercueil wrote:
> Hi,
>
> Le lun. 8 juin 2020 à 18:10, Suman Anna a écrit :
> > Hi Paul,
> >
> > On 6/8/20 5:46 PM, Paul Cercueil wrote:
> > > Hi Suman,
> > >
> > > > > > On 5/15/20 5:43 AM, Paul Cercueil wrote:
> > > > > > > Call pm_runtime_get_sync()
On Wed, Jun 10, 2020 at 07:59:55PM -0700, Kees Cook wrote:
>
> Yeah, that seems reasonable. Here's the diff for that part:
>
> diff --git a/include/uapi/linux/seccomp.h b/include/uapi/linux/seccomp.h
> index 7b6028b399d8..98bf19b4e086 100644
> --- a/include/uapi/linux/seccomp.h
> +++
Hi Miquel,
On 6/9/2020 7:32 PM, Miquel Raynal wrote:
Hi Sivaprakash,
Sivaprakash Murugesan wrote on Tue, 9 Jun
2020 16:40:55 +0530:
SFLASHC_BURST_CFG register is not available on all ipq nand platforms,
it is available only on ipq8064 devices and the nand controller works
without
Make kernel GNU build-id available in VMCOREINFO. Having
build-id in VMCOREINFO facilitates presenting appropriate kernel
namelist image with debug information file to kernel crash dump
analysis tools. Currently VMCOREINFO lacks uniquely identifiable
key for crash analysis automation.
Regarding
Hi Miquel,
Thanks for the review.
On 6/9/2020 7:33 PM, Miquel Raynal wrote:
Hi Sivaprakash,
Sivaprakash Murugesan wrote on Tue, 9 Jun
2020 16:40:56 +0530:
BAM mode is set by writing BAM_MODE_EN bit on NAND_CTRL register.
NAND_CTRL is an operational register and in BAM mode operational
On Thu, 2017-09-01 at 10:25:32 -0700, Kees Cook wrote:
> Subject: Re: [PATCH v2] usb: gadget: configfs: Fix KASAN use-after-free
> To: Jim Lin
> Cc: Felipe Balbi , , LKML
> , Greg KH ,
> Steve Beattie
>
>
> On Tue, Jan 17, 2017 at 1:29 AM, Jim Lin wrote:
> > When gadget is disconnected,
Hi Linus,
The following changes since commit ffeb595d84811dde16a28b33d8a7cf26d51d51b3:
Merge tag 'powerpc-5.7-6' of
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
(2020-05-30 12:28:44 -0700)
are available in the Git repository at:
As IOMMU UAPI gets extended, user data size may increase. To support
backward compatibiliy, this patch introduces a size field to each UAPI
data structures. It is *always* the responsibility for the user to fill in
the correct size.
Specific scenarios for user data handling are documented in:
IOMMU user API header was introduced to support nested DMA translation and
related fault handling. The current UAPI data structures consist of three
areas that cover the interactions between host kernel and guest:
- fault handling
- cache invalidation
- bind guest page tables, i.e. guest PASID
IOMMU UAPI is newly introduced to support communications between guest
virtual IOMMU and host IOMMU. There has been lots of discussions on how
it should work with VFIO UAPI and userspace in general.
This document is indended to clarify the UAPI design and usage. The
mechenics of how future
Hi Linus:
This push contains a number of fixes to the omap and nitrox drivers.
The following changes since commit 58ca0060ec4e51208d2eee12198fc55fd9e4feb3:
crypto: hisilicon - fix driver compatibility issue with different versions of
devices (2020-05-28 17:27:52 +1000)
are available in the
IOMMU UAPI data has an argsz field which is filled by user. As the data
structures expands, argsz may change. As the UAPI data are shared among
different architectures, extensions of UAPI data could be a result of
one architecture which has no impact on another. Therefore, these argsz
santity
Asalam - alikom,
I apologise for sending an unexpected message,
We are an expert in Finance, Investments and Assets Collateralization.
We offer loan / project funding at a low interest rate of 2.5% RIO per
anum. Kindly revert back if interested for further proceedings and
negotiations.
Hi Linus,
dhowells reported an oops, and the i915 team tracked it down to a
missing fix that didn't have correct tags, they've pulled it in along
with two other fixes.
I might have some more fixes for rc1, but I might not, taking the day
off tomorrow, so probably won't be in a hurry to process
Hi all,
News: The merge window has opened, so please do *not* add v5.9 material
to your linux-next included branches until after v5.8-rc1 has been
released.
Changes since 20200610:
My fixes tree contains:
4cb4bfffe2c1 ("device_cgroup: Fix RCU list debugging warning")
The tip t
Greeting,
FYI, we noticed the following commit (built with gcc-9):
commit: c7b2a6d1affb732cdb37677f31cc8c2499fbf57c ("[PATCHv2 1/2] x86/mm: Fix
boot with some memory above MAXMEM")
url:
Since commit cbe46bd4f510 ("powerpc: remove CONFIG_CMDLINE #ifdef mess")
CONFIG_CMDLINE has always had a value regardless of CONFIG_CMDLINE_BOOL.
For example:
$ make ARCH=powerpc defconfig
$ cat .config
# CONFIG_CMDLINE_BOOL is not set
CONFIG_CMDLINE=""
When enabling CONFIG_CMDLINE_BOOL
Fix the following build errors:
include/linux/spi 2>&1 || true
ln -sf /home/zhangqing/spi.git2/tools/spi/../../include/uapi/linux/spi/spidev.h
include/linux/spi/spidev.h
make -f /home/zhangqing/spi.git2/tools/build/Makefile.build dir=.
obj=spidev_test
make[1]: Entering directory
Fix the following sparse warning:
./spidev_test.c:50:9: warning: symbol 'default_tx' was not declared. Should it
be static?
./spidev_test.c:59:9: warning: symbol 'default_rx' was not declared. Should it
be static?
./spidev_test.c:60:6: warning: symbol 'input_tx' was not declared. Should it be
> If the second exfat_get_dentry() call fails then we need to release "old_bh"
> before returning. There
> is a similar bug in exfat_move_file().
>
> Fixes: 5f2aa075070c ("exfat: add inode operations")
> Reported-by: Markus Elfring
> Signed-off-by: Dan Carpenter
Applied. Thanks!
On 6/10/2020 12:15 PM, Jonathan McDowell wrote:
> This patch improves the handling of the SGMII interface on the QCA8K
> devices. Previously the driver did no configuration of the port, even if
> it was selected. We now configure it up in the appropriate
> PHY/MAC/Base-X mode depending on what
tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
master
head: b29482fde649c72441d5478a4ea2c52c56d97a5e
commit: 80591e61a0f7e88deaada69844e4a31280c4a38f kbuild: tell sparse about the
$ARCH
date: 7 months ago
config: s390-randconfig-s032-20200611 (attached as .config)
This allows other driver to reuse the name string for spi-altera
platform device creation.
Signed-off-by: Matthew Gerlach
Signed-off-by: Wu Hao
Signed-off-by: Xu Yilun
Signed-off-by: Russ Weight
---
drivers/spi/spi-altera.c | 6 ++
include/linux/spi/altera.h | 2 ++
2 files changed, 4
From: Matthew Gerlach
The spi-altera driver was originally written with a 32
bit processor, where sizeof(unsigned long) is 4. On a
64 bit processor sizeof(unsigned long) is 8. Change the structure
member to u32 to match the actual size of the control
register.
Signed-off-by: Matthew Gerlach
Add support for 32bit width data register, then it supports 32bit
data width spi slave device and spi transfers.
Signed-off-by: Xu Yilun
Signed-off-by: Wu Hao
Signed-off-by: Matthew Gerlach
Signed-off-by: Russ Weight
---
drivers/spi/spi-altera.c | 14 ++
1 file changed, 14
This patchset adds platform_data for spi-altera, to enable more IP
configurations, and creating specific spi client devices. It also adds
regmap support, to enable the indirect access to this IP.
We have a PCIE based FPGA platform which integrates this IP to communicate
with a BMC chip (Intel
This patch introduced SPI core parameters in platform data, it
allows passing these SPI core parameters via platform data.
Signed-off-by: Wu Hao
Signed-off-by: Xu Yilun
Signed-off-by: Matthew Gerlach
Signed-off-by: Russ Weight
---
drivers/spi/spi-altera.c | 25 ++---
在 2020/6/10 下午1:23, Joonsoo Kim 写道:
> 2020년 6월 9일 (화) 오후 11:46, Johannes Weiner 님이 작성:
>>
>> On Tue, Jun 09, 2020 at 05:15:33PM +0800, Alex Shi wrote:
>>>
>>>
>>> 在 2020/6/4 上午7:03, Andrew Morton 写道:
+ /* XXX: Move to lru_cache_add() when it supports new vs putback */
>>>
>>> Hi
This patch introduces platform data for slave information, it allows
spi-altera to add new spi devices once master registration is done.
Signed-off-by: Wu Hao
Signed-off-by: Xu Yilun
Signed-off-by: Matthew Gerlach
Signed-off-by: Russ Weight
---
drivers/spi/spi-altera.c | 11 +++
This patch adds support for regmap. It allows this driver to
be compatible if low layer register access method is changed
in some cases.
Signed-off-by: Matthew Gerlach
Signed-off-by: Wu Hao
Signed-off-by: Xu Yilun
Signed-off-by: Russ Weight
---
drivers/spi/Kconfig| 1 +
Fix spelling issues over the comments in the code.
requsted ==> requested
deterimined ==> determined
insde ==> inside
neet ==> need
somthing ==> something
Signed-off-by: Keyur Patel
---
fs/ext4/extents.c | 10 +-
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git
From: Daeho Jeong
Added a new ioctl to send discard commands or/and zero out
to whole data area of a regular file for security reason.
Signed-off-by: Daeho Jeong
---
fs/f2fs/f2fs.h | 8 +++
fs/f2fs/file.c | 143 +
2 files changed, 151
On 6/10/2020 12:14 PM, Jonathan McDowell wrote:
> Update the driver to use the new PHYLINK callbacks, removing the
> legacy adjust_link callback.
>
> Signed-off-by: Jonathan McDowell
This looks reasonable to me, Russell would be the person you want to get
an Acked-by/Reviewed-by tag from.
--
On Wed, Jun 10, 2020 at 08:11:39PM +0200, Alexander A. Klimov wrote:
> Am 10.06.20 um 10:57 schrieb Federico Vaga:
> > On Tuesday, June 9, 2020 10:12:41 PM CEST Alexander A. Klimov wrote:
> > > Rationale:
> > > Reduces attack surface on kernel devs opening the links for MITM
> > > as HTTPS traffic
On 2020/6/10 下午9:11, Pierre Morel wrote:
Protected Virtualisation protects the memory of the guest and
do not allow a the host to access all of its memory.
Let's refuse a VIRTIO device which does not use IOMMU
protected access.
Signed-off-by: Pierre Morel
---
From: Daeho Jeong
Added a new ioctl to send discard commands or/and zero out
to whole data area of a regular file for security reason.
Signed-off-by: Daeho Jeong
---
fs/f2fs/f2fs.h | 8 +++
fs/f2fs/file.c | 143 +
2 files changed, 151
On 6/10/20 8:07 PM, Souptick Joarder wrote:
> Hi Stephen,
>
> While compiling linux-next-20200610, I hit below compile error.
> .config file is attached.
>
> Steps ->
>
> 1. Download the tar
> 2. make defconfig
> 3. make -j4
>
> In file included fro
On 2020/6/10 下午7:05, Michael S. Tsirkin wrote:
+EXPORT_SYMBOL_GPL(vhost_get_vq_desc);
/* Reverse the effect of vhost_get_vq_desc. Useful for error handling. */
void vhost_discard_vq_desc(struct vhost_virtqueue *vq, int n)
{
+ unfetch_descs(vq);
vq->last_avail_idx -= n;
On Thu, 2020-06-11 at 10:06 +0800, kernel test robot wrote:
> On Sun, Jun 07, 2020 at 09:13:08AM +0800, Ian Kent wrote:
> > On Sat, 2020-06-06 at 20:18 +0200, Greg Kroah-Hartman wrote:
> > > On Sat, Jun 06, 2020 at 11:52:16PM +0800, kernel test robot
> > > wrote:
> > > > Greeting,
> > > >
> > > >
On Wed, Jun 10, 2020 at 08:48:45AM +, David Laight wrote:
> From: Sargun Dhillon
> > Sent: 10 June 2020 09:13
> In essence the 'copy_to_user' is done by the wrapper code.
> The code filling in the CMSG buffer can be considered to be
> writing a kernel buffer.
>
> IIRC other kernels (eg
On 2020/6/11 10:28, Dave Chinner wrote
Actually, it's a lot simpler:
thread1 thread2
__xfs_trans_commit
xfs_log_commit_cil
xlog_wait
schedule
xlog_cil_push_work
wake_up_all
On Wed, Jun 10, 2020 at 08:12:38AM +, Sargun Dhillon wrote:
> As an aside, all of this junk should be dropped:
> + ret = get_user(size, >size);
> + if (ret)
> + return ret;
> +
> + ret = copy_struct_from_user(, sizeof(addfd), uaddfd, size);
> + if (ret)
> +
On 2020/6/10 下午4:51, Michael S. Tsirkin wrote:
On Wed, Jun 10, 2020 at 04:25:06PM +0800, Jason Wang wrote:
+
+#define VP_VDPA_FEATURES \
+ ((1ULL << VIRTIO_F_ANY_LAYOUT)| \
This is presumably for transitional devices only. In fact looking at
code it seems that only
On 2020/6/10 上午12:49, Bjorn Helgaas wrote:
On Tue, Jun 09, 2020 at 11:15:06AM +0200, Arnd Bergmann wrote:
On Tue, Jun 9, 2020 at 6:02 AM Zhangfei Gao wrote:
On 2020/6/9 上午12:41, Bjorn Helgaas wrote:
On Mon, Jun 08, 2020 at 10:54:15AM +0800, Zhangfei Gao wrote:
On 2020/6/6 上午7:19, Bjorn
On Wed, Jun 10, 2020 at 10:56 AM Sudeep Holla wrote:
[I admit you can write bigger posts than me, so I am not going to
write a passionate response to each of your paragraphs.
Let's keep it to the point.]
> > > > if (xfer->hdr.poll_completion) {
> > > > - ktime_t stop =
From: Dave Chinner
xlog_wait() on the CIL context can reference a freed context if the
waiter doesn't get scheduled before the CIL context is freed. This
can happen when a task is on the hard throttle and the CIL push
aborts due to a shutdown. This was detected by generic/019:
thread 1
A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "devm_kcalloc".
Signed-off-by: Xu Wang
---
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 5 +++--
1 file changed, 3
Hi Linus,
Please pull this third part of the 5.8 DAX changes. Now that the xfs
changes have landed, this third piece changes the FS_XFLAG_DAX ioctl
code in xfs to request that the inode be reloaded after the last program
closes the file, if doing so would make a S_DAX change happen. This
goal
The bpf_prog is being checked for !NULL after uml_kmalloc but
later its used directly for example:
bpf_prog->filter = bpf and is also later returned upon success.
Fix this, do a NULL check and return right away.
Signed-off-by: Gaurav Singh
---
arch/um/drivers/vector_user.c | 8 +---
1 file
On Thu, Jun 11, 2020 at 1:19 AM Luck, Tony wrote:
>
> On Wed, Jun 10, 2020 at 02:58:46PM +0800, Zhenzhong Duan wrote:
> > By calling edac_inc_ue_error() before panic, we get a correct UE error
> > count for core dump analysis.
>
> Looks accurate, and I'll add the patch to be applied. But I wonder
The original code is a nop as i_mce.status is or'ed with part of itself,
fix it.
Signed-off-by: Zhenzhong Duan
---
arch/x86/kernel/cpu/mce/inject.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kernel/cpu/mce/inject.c b/arch/x86/kernel/cpu/mce/inject.c
index
On 4/4/20 1:55 AM, syzbot wrote:
Hello,
syzbot found the following crash on:
HEAD commit:bef7b2a7 Merge tag 'devicetree-for-5.7' of git://git.kerne..
git tree: upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=15f39c5de0
kernel config:
On 6/10/20 7:17 PM, Al Viro wrote:
> On Wed, Jun 10, 2020 at 06:36:16PM -0700, Matthew Wilcox wrote:
>
>> while (file->f_mode & FMODE_OVL_UPPER)
>> file = file->private_data;
>> return file;
>>
>> Or are you proposing that overlayfs copy FMODE_HUGEPAGES from the
>>
On Wed, Jun 10, 2020 at 06:49:45PM -0700, Eric Biggers wrote:
> From: Eric Biggers
>
> There's no need for mnt_want_write_file() to clone a write reference to
> the mount when the file is already open for writing, provided that
> mnt_drop_write_file() is changed to conditionally drop the
On Thu, Jun 11, 2020 at 09:39:52AM +0800, Yu Kuai wrote:
> I recently got UAF by running generic/019 in qemu:
>
> ==
> BUG: KASAN: use-after-free in __lock_acquire+0x4508/0x68c0
> Read of size 8 at addr 88811327f080 by task
On 2020/6/11 8:23, Yan Zhao wrote:
> On Wed, Jun 10, 2020 at 04:59:43PM +0800, Xiang Zheng wrote:
>> Hi Yan,
>>
>> few nits below...
>>
>> On 2020/5/18 10:53, Yan Zhao wrote:
>>> This driver intercepts all device operations as long as it's probed
>>> successfully by vfio-pci driver.
>>>
>>> It
On Mon, Mar 2, 2020 at 8:36 PM Minchan Kim wrote:
> From: Oleksandr Natalenko
>
> It all began with the fact that KSM works only on memory that is marked
> by madvise(). And the only way to get around that is to either:
[...]
> To overcome this restriction, lets employ a new remote madvise API.
On 6/10/20 7:06 PM, kernel test robot wrote:
On Sun, Jun 07, 2020 at 09:13:08AM +0800, Ian Kent wrote:
It seems the result of stress-ng is inaccurate if test time too
short, we'll increase the test time to avoid unreasonable results,
sorry for the inconvenience.
Thank you for your response!
On 6/10/20 6:56 PM, Catalin Marinas wrote:
On Wed, Jun 10, 2020 at 03:51:56PM +0800, kernel test robot wrote:
FYI, we noticed the following commit (built with gcc-7):
commit: b751c52bb587ae66f773b15204ef7a147467f4c7 ("kmemleak: increase
DEBUG_KMEMLEAK_EARLY_LOG_SIZE default to 16K")
On Wed, Jun 10, 2020 at 9:58 PM Lakshmi Ramasubramanian
wrote:
> On 6/10/20 6:45 PM, Paul Moore wrote:
>
> Hi Paul,
>
> > I'm sorry I didn't get a chance to mention this before you posted this
> > patch, but for the past several years we have been sticking with a
> > policy of only adding new
On Wed, Jun 10, 2020 at 06:36:16PM -0700, Matthew Wilcox wrote:
> while (file->f_mode & FMODE_OVL_UPPER)
> file = file->private_data;
> return file;
>
> Or are you proposing that overlayfs copy FMODE_HUGEPAGES from the
> underlying fs to the overlaying fs?
The latter -
From: Ramuthevar Vadivel Murugan
Add the dt-schema to support USB PHY on Intel LGM SoC
Signed-off-by: Ramuthevar Vadivel Murugan
---
.../devicetree/bindings/usb/intel,lgm-usb-phy.yaml | 53 ++
1 file changed, 53 insertions(+)
create mode 100644
From: Ramuthevar Vadivel Murugan
Add support for USB PHY on Intel LGM SoC.
Signed-off-by: Ramuthevar Vadivel Murugan
---
drivers/usb/phy/Kconfig | 11 ++
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/phy-lgm-usb.c | 280 ++
3 files
The USB PHY provides the optimized for low power dissipation while active,
idle, or on standby.
Requires minimal external components, a single resistor, for best operation.
Supports 10/5-Gbps high-speed data transmission rates through 3-m USB 3.x cable
---
v2:
- Address Phillip's review
On Wed, Jun 10, 2020 at 5:57 PM wrote:
> From: Tom Rix
>
> Clang's static analysis tool reports these double free memory errors.
>
> security/selinux/ss/services.c:2987:4: warning: Attempt to free released
> memory [unix.Malloc]
> kfree(bnames[i]);
>
Hi all,
On Wed, 10 Jun 2020 12:17:07 +1000 Stephen Rothwell
wrote:
>
> Today's linux-next merge of the scsi-mkp tree got a conflict in:
>
> drivers/scsi/sr.c
>
> between commit:
>
> a711d91cd97e ("block: add a cdrom_device_info pointer to struct gendisk")
>
> from Linus' tree and
Veyron Jaq and Mighty both use the Marvel 8897 WiFi+BT chip. Add wakeup
and pinctrl block to devicetree so the btmrvl driver can correctly
configure the wakeup interrupt.
Signed-off-by: Abhishek Pandit-Subedi
Reviewed-by: Reviewed-by: Douglas Anderson
---
The Veyron Mighty Chromebook (rk3288
On Sun, Jun 07, 2020 at 09:13:08AM +0800, Ian Kent wrote:
> On Sat, 2020-06-06 at 20:18 +0200, Greg Kroah-Hartman wrote:
> > On Sat, Jun 06, 2020 at 11:52:16PM +0800, kernel test robot wrote:
> > > Greeting,
> > >
> > > FYI, we noticed a 11827.2% improvement of stress-
> > > ng.stream.ops_per_sec
Ok, I got it. Thanks for quick response~ :)
2020년 6월 11일 (목) 오전 10:56, Eric Biggers 님이 작성:
>
> On Thu, Jun 11, 2020 at 09:23:23AM +0900, Daeho Jeong wrote:
> > Yes, I saw the implementation in vfs_write().
> > But if we use mnt_want_write_file() here, it'll call mnt_clone_write()
> > internally
On 6/10/20 6:45 PM, Paul Moore wrote:
Hi Paul,
I'm sorry I didn't get a chance to mention this before you posted this
patch, but for the past several years we have been sticking with a
policy of only adding new fields to the end of existing records;
please adjust this patch accordingly.
tree/branch: https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git
WIP.fixes
branch HEAD: 0acd9a0ded80c986ccc9588ba2703436769ead74 Revert "mm/vmalloc:
modify struct vmap_area to reduce its size"
elapsed time: 1130m
configs tested: 172
configs skipped: 15
The following configs have
On Thu, Jun 11, 2020 at 09:23:23AM +0900, Daeho Jeong wrote:
> Yes, I saw the implementation in vfs_write().
> But if we use mnt_want_write_file() here, it'll call mnt_clone_write()
> internally if the file is already open in write mode.
> Don't you think the below thing is needed? We can increase
Use device_init_wakeup to allow the Bluetooth dev to wake the system
from suspend. Currently, the device can wake the system but no
power/wakeup entry is created in sysfs to allow userspace to disable
wakeup.
Signed-off-by: Abhishek Pandit-Subedi
Reviewed-by: Douglas Anderson
---
Set the correct parent dev when registering hdev. This allows userspace
tools to find the parent device (for example, to set the power/wakeup
property).
Before this change, the path was /sys/devices/virtual/bluetooth/hci0
and after this change, it looks more like:
Use the parent device's power/wakeup to control whether we support
remote wake. If remote wakeup is disabled, Bluetooth will not enable
scanning for incoming connections.
Signed-off-by: Abhishek Pandit-Subedi
Reviewed-by: Douglas Anderson
---
drivers/bluetooth/btmrvl_main.c | 9 +
1
p9_read_work and p9_fd_cancelled may be called concurrently.
Before list_del(>rreq->req_list) in p9_read_work is called,
the req->req_list may have been deleted in p9_fd_cancelled.
We can fix it by setting req->status to REQ_STATUS_FLSHD after
list_del(>req_list) in p9_fd_cancelled.
Before
Hi linux-bluetooth,
This patch series is refactoring the btmrvl driver to add better support
for controlling remote wakeup during suspend. Previously, the hci device
was getting created as /sys/devices/virtual/bluetooth/hci0 and there
wasn't a way to control wakeup for the device from
Hi Ionela,
Thanks for your reply !
On 2020/6/10 17:40, Ionela Voinescu wrote:
> Hi guys,
>
> Sorry for showing up late to the party, I was on holiday last week.
>
> On Thursday 04 Jun 2020 at 13:58:22 (+0100), Sudeep Holla wrote:
>> On Thu, Jun 04, 2020 at 12:42:06PM +0200, Rafael J. Wysocki
From: Eric Biggers
There's no need for mnt_want_write_file() to clone a write reference to
the mount when the file is already open for writing, provided that
mnt_drop_write_file() is changed to conditionally drop the reference.
We seem to have ended up in the current situation because
The pull request you sent on Wed, 10 Jun 2020 21:28:37 +0100:
> git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs.git uaccess.i915
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/3a8557e1aed0043d526f304a1f500108c8976b78
Thank you!
--
Deet-doot-dot, I am a bot.
The pull request you sent on Wed, 10 Jun 2020 21:30:19 +0100:
> git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs.git work.misc
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/4dbb29fe9dae033a375f231da9cc27aaa09d2580
Thank you!
--
Deet-doot-dot, I am a bot.
1 - 100 of 1152 matches
Mail list logo
