Actually, this occured at 2.4.2
I searched though the archives, and the only people who were able to get
this resolved were those with a non-isapnp card (by added isapnp=0).
However, I have an isapnp card and the driver doesn't think my card
exists. If I lod it, withot options, I get:
russ kerne
Subject: 2.4.4, 2.4.4-ac1 and -ac3: oops loading future domain scsi module
Date: Wed, May 02, 2001 at 08:30:18AM +0200
Quoting Carlo E. Prelz ([EMAIL PROTECTED]):
> Here I am with another, fresh oops that I encountered while exploring
> new kernels. This time, the oops is generat
Please CC any replies.
I've attached a 'filled in' bug-report from REPORTING-BUGS template.
I've also attached my .config from 2.4.4{ac2}. I've followed a few other
threads that are indicating the same problem, is there still usefulness
in trying to capture an oops from 2.4.4? Bit odd that 2.4.4a
Hi,
This moves pci_enable_device in emu10k1 driver before any resource
access.
Ciao, Marcus
Index: main.c
===
RCS file: /build/mm/work/repository/linux-mm/drivers/sound/emu10k1/main.c,v
retrieving revision 1.3
diff -u -r1.3 linux-m
> /proc/uptime:
> 4400586.27 150439.36
>
> /proc/stat:
> cpu 371049158 3972370867 8752820 4448994822
> (user,nice, system, idle)
>
> In .../fs/proc/proc_misc.c:kstat_read_proc(), the cpu line is being
> computed by:
>
> len = sprintf(page, "cpu %u %u %u %lu\n", user, nic
As i stated before,
2.4.4, ac1, ac2 AND now ac3 will panic on receiving ICMPv6 packets (like traceroute6
and ping6)
See my earlier messages for panic info.
--
Cliff Albert| IRCNet:#linux.nl, #ne2000, #linux, #freebsd.nl
[EMAIL PROTECTED] |#openbsd, #ipv6,
Hi All,
I've now been battling for several days with the kernel performance stats
for disks and have come to the conclusion I need some assistance from
someone with a little more understanding of the block device support in
the kernel (and the kernel in general).
Initially I've been looking at
Here I am with another, fresh oops that I encountered while exploring
new kernels. This time, the oops is generated when trying to load the
module for a very old (1993) Future Domain SCSI card. 2.4.3-ac7 was my
previous kernel and worked perfectly. Now, loading the module
generates the following O
In message <[EMAIL PROTECTED]> you write:
> net/network.o: In function `init_or_cleanup':
> net/network.o(.text+0x4a530): relocation truncated to fit: R_ARM_PC24 ip_nat_
cleanup
My bad: Russell, you're absolutely right.
Obvious fix below.
Thanks!
Rusty.
diff -urN -I \$.*\$ -X /tmp/kerndiff.guo
what I am trying to do is this. I have a genuine network, say 1.1.1.x, and
my Linux host is on it, as 1.1.1.252 (eth0). I also have a second network at
the back of the Linux box, 192.168.200.x, and a web server on that network,
192.168.200.2. The Linux address is 192.168.200.1 on eth1.
What I w
Alpha. 2.4.1. Hz = 1024. Uptime > 48.54518 days (low idle).
(Subject message from ps and friends.)
/proc/uptime:
4400586.27 150439.36
/proc/stat:
cpu 371049158 3972370867 8752820 4448994822
(user,nice, system, idle)
In .../fs/proc/proc_misc.c:kstat_read_proc(), the cpu line is
>I am just a beginner in linux programming and I want to write a
>script for disconnecting users in cisco router.
This would be the wrong list to ask such a question. It is for the discussion
of the inner workings of the Linux kernel, not for questions about
applications which can be run on a L
Hello all,
I am just a beginner in linux programming and I want to write a
script for disconnecting users in cisco router.Could anybody help me out.
The scenario is like this. I have been using Cisco router2500
and in that we have users connected to it in async port.
when
On Tue, 1 May 2001, Mohammad A. Haque wrote:
> [EMAIL PROTECTED] wrote:
> > This patch replaces a wee bit of code vmware wanted in include/linux/skbuff.h
> > although I'm guessing it was removed for a reason and vmware should be patched
> > to use the new method.
> >
>
> Better to patch vmware ra
>Since the official aic7xxx site doesn't carry a patch against 2.4.4 yet
>(just 2.4.3) which has cosmetic issues when being patched, I made a
>patch against 2.4.4: I took the 2.4.3-aic7xxx-6.1.12 patch, applied to
>2.4.4, bumped the version to read -ma1 in EXTRAVERSION, and made a new
>patch again
>I guess we'll just have to wait for Justin to come out with the real patch...
It's out.
--
Justin
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please rea
>
>1. New aic7xxx driver locking disk access
The 6.1.5 version of the aic7xxx driver is quite stale. Can
you try 6.1.13 from:
http://people.FreeBSD.org/~gibbs/linux/
and see if this clears up your problem?
Thanks,
Justin
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel
Quoting Trond Myklebust <[EMAIL PROTECTED]> from ml.linux.kernel:
:> " " == Raphael Manfredi <[EMAIL PROTECTED]> writes:
: > An "ls -l" on the file yields:
:
: > -rw--- 1 ram users 1642491 May 1 00:00 inbox
:
: > (on the server, and via NFS), which is *abnormal*, since
The attached patch fixes the MOXA driver properly. Indexing is 0 based, so
rather than adjust the enum, don't subtract 1 from each index. Also use a
for loop for the PCI devices, and up the version number.
--
Tim Hockin
Systems Software Engineer
Sun Microsystems, Cobalt Server Appliances
[EMA
> > this has nothing to do with the very specific disk corruption
> > being discussed (which has to do with the ide controller, according
> > to the most recent rumors.).
>
> Actually, I think there are 2 problems that have been discussed -- the
> disk corruption and a general instability resul
In mailing-lists.linux-kernel, Seth wrote:
> Because lspci does not display all 256 bytes of pci configuration
>information.
Umm, "lspci -xxx"? At least, on lspci version 2.1.8 from RedHat 7.1.
Wayne
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a me
Dear All,
How can do to disable the L1 cache in linux ?
Are there some commands or directives to disable it ??
Thanks
Alex
N§²æìr¸yúèØb²X¬¶Ç§vØ^)Þº{.nÇ+·¥{±êçzX§¶¡Ü¨}©²Æ zÚ&j:+v¨¾«êçzZ+Ê+zf£¢·h§~Ûiÿûàz¹ ®w¥¢¸?¨èÚ&¢)ߢfù^jÇ«y§m
á@A«a¶Úÿ
0¶ìh®åi
"Steven J. Hill" <[EMAIL PROTECTED]> said:
> I checked in the archives and did not see a discussion of this
> anywhere. I have received some Linux kernel code from a project
> that I have inherited and a couple of the drivers are including
> math.h from the C library. This being the header file fr
On Tue, 1 May 2001, Rick Hohensee wrote:
> (kspamd) is the Linux-side wrapper for H3sm
C|N>K
OK, you owe me a new keyboard. And thanks for new .sig.
BTW, Rick, out of curiosity - how many Greencard Lawyers does it take
to upgrade the thing to full-blown H1 S&M?
-
To unsubscribe from th
Greetings.
I checked in the archives and did not see a discussion of this
anywhere. I have received some Linux kernel code from a project
that I have inherited and a couple of the drivers are including
math.h from the C library. This being the header file from
'/usr/include/math.h' in most cases.
Hello Daniel,
This combination against 2.4.4 won't allow directories to be moved.
Ex: mv a b #fails with I/O error. See attached strace.
But with ext2-dir-patch-S4 by itself, mv works as it should.
Later,
Albert
Daniel Phillips wrote:
>
> > Patch is on ftp.math.psu.edu/pub/viro/ext2-dir-patch-S
Dear All,
How can do to disable the L1 cache in linux ?
Are there some commands or directives to disable it ??
Thanks
Alex
èº{.nÇ+·®+%Ëlzwm
éb맲æìr¸zX§» ®w¥{ayº ÊÚë,j¢f£¢·hàz¹ ®w¥¢¸
¢·¦j:+v¨wèjØm¶ÿ¾«êçzZ+ùÝ¢j"ú!¶iOæ¬z·vØ^¶m§ÿðà nÆàþY&
( H3sm is my 3-stack Forth variant. )
I have a Linux 2.4.0-test10 kernel building and booting nicely with H3sm
partially installed as an in-kernel thread ala kswapd, the virtual memory
swapper. This means H3sm runs in cooperative multitasking with the Linux
schuduler, i.e. it's something of a co-
* Miles Lane <[EMAIL PROTECTED]> [May 01. 2001 18:50]:
> This patch is not showing up on ftp.kernel.org.
> Can you check that you actually got is pushed?
> Perhaps something is busted in the mirroring?
ftp://ftp.linux.org.uk:/pub/linux/alan/
--
Mads Martin Joergensen, http://mmj.dk
"Why make th
Manfred Spraul wrote:
>
> > So it seems that CONFIG_X86_USE_3DNOW is simply used to
> > enable access to the routines in mmx.c (the athlon-optimized
> > routines on CONFIG_K7 kernels), so then it appears that somehow
> > this is corrupting memory / not behaving as it should (very
> > technical, r
Mark Hahn wrote:
>
> > And that's exactly what I did :)... I found that ONLY the combination
> > of USE_3DNOW and forcing the athlon mmx stuff in (by doing #if 1 in
> > results in this wackiness. I should alos repeat that I *DO* see that
>
> I doubt that USE_3DNOW is causing the problem, but
On Tue, 01 May 2001 18:42:01 -0700,
Miles Lane <[EMAIL PROTECTED]> wrote:
>This patch is not showing up on ftp.kernel.org.
hpa says it is a bandwidth problem in kernel.org, have patience.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAI
[EMAIL PROTECTED] wrote:
> This patch replaces a wee bit of code vmware wanted in include/linux/skbuff.h
> although I'm guessing it was removed for a reason and vmware should be patched
> to use the new method.
>
Better to patch vmware rather than the kernel. Here's a patch thet
should be applie
[EMAIL PROTECTED] writes:
> --- skbuff.h.orig Tue May 1 18:41:50 2001
> +++ skbuff.hTue May 1 18:41:55 2001
> @@ -244,6 +244,11 @@
>
> /* Internal */
> #define skb_shinfo(SKB)((struct skb_shared_info *)((SKB)->end))
> +/* for vmware */
> +static inline atom
Despite VMware's webpage claiming compatibility issues with 2.4.x kernels I'd
been using it without any problem until I upgraded to 2.4.4. I couldn't use
their precompiled modules of course but compiling to match the running kernel
worked fine previously.
This patch replaces a wee bit of code vm
Hi Alan,
This patch is not showing up on ftp.kernel.org.
Can you check that you actually got is pushed?
Perhaps something is busted in the mirroring?
Thanks,
Miles
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Mor
On Wed, 2 May 2001, Roger Larsson wrote:
> On Wednesday 02 May 2001 02:43, Rik van Riel wrote:
> > On Tue, 1 May 2001, David S. Miller wrote:
> > > Rik van Riel writes:
> > > > Then we will be scanning through memory looking for something to
> > > > swap out (otherwise we'd not be in need of swa
On Wednesday 02 May 2001 02:43, Rik van Riel wrote:
> On Tue, 1 May 2001, David S. Miller wrote:
> > Rik van Riel writes:
> > > Then we will be scanning through memory looking for something to
> > > swap out (otherwise we'd not be in need of swap space, right?).
> > > At this point we can simpl
Dear All,
How can do to turn off the L1 cache in linux ?
Are there some commands or directives to turn off it ??
Thanks
Alex
èº{.nÇ+·®+%Ëlzwm
éb맲æìr¸zX§» ®w¥{ayº ÊÚë,j¢f£¢·hàz¹ ®w¥¢¸
¢·¦j:+v¨wèjØm¶ÿ¾«êçzZ+ùÝ¢j"ú!¶iOæ¬z·vØ^¶m§ÿðà nÆàþY&
Linus Torvalds writes:
> I would suggest the opposite approach instead: make the PPC just support
> isa_readx/isa_writex instead.
We can certainly do that, no problem.
BUT that won't get a token ring pcmcia card working in the newer
powerbooks, such as the titanium G4 powerbook, because the PCI
Hi, all. I've been staring at the APM code and trying to figure out
some things related to idle behaviour. I'm staring at the code for
2.2.19.
My first question is why does cpu_idle() wait for 0.33 seconds of
idling before calling acpi_idle() (apm_cpu_idle() in fact)? Why not
wait less time, or
On 1 May 2001 13:11:33 CDT,
shreenivasa H V <[EMAIL PROTECTED]> wrote:
>I am having trouble compiling the modules for kernel 2.4. The compilation
>doesn't go through, it just goes into each directory and says "nothing to do"
>and comes out. The object files are not created.
Does your 2.4.4 .conf
On Tue, 1 May 2001, David S. Miller wrote:
> Rik van Riel writes:
> > Then we will be scanning through memory looking for something to
> > swap out (otherwise we'd not be in need of swap space, right?).
> > At this point we can simply free up swap entries while scanning
> > through memory look
Rik van Riel writes:
> Then we will be scanning through memory looking for something to
> swap out (otherwise we'd not be in need of swap space, right?).
> At this point we can simply free up swap entries while scanning
> through memory looking for stuff to swap out.
Sounds a lot like my pat
On Tue, 1 May 2001, Stephen C. Tweedie wrote:
> The right fix is to reclaim such pages only when we need to. To
> disable swap caching when we still have enough swap free would hurt
> users who have the spare swap to cope with it.
That's easy enough. When we are:
1. almost out of swap and
2. ne
Oliver Neukum wrote:
>
> On Tuesday, 1. May 2001 22:49, Erik Hensema wrote:
> > Hi,
> >
> > A little question which may be a FAQ: what does the major version number
> > [1] of the Linux kernel (still) mean? What is the policy on increasing the
> > major version (eg. on what basis it is decided t
On Tue, 1 May 2001, Trond Myklebust wrote:
> > I'll give your patch a spin tomorrow, after I catch some
> > zzz's. :-)
>
> Right you are.
And indeed, the tcp-hang patch fixed the problem! Thanks a lot!
> FYI I've now put up those patches of which I am aware against 2.2.19
> on
>
>
I have motherboard with VIA MVP3 chipset.
I noticed big video slowdown since 2.4.2-ac21. Watching "divx" by avifile with
new kernels is impossible, becouse very bad performance. Now, after few hours -
I found the reason, and I don't understand it.
It has nothing to do with mtrr or K6. In file
* At 2001-05-02T01:12+0200, [EMAIL PROTECTED] wrote:
:
| The first line makes unadorned [no Shift, Ctrl, Alt] slash
| (on my keyboard the key with keytop / has keycode 53 as showkey tells me)
| into a dead ASCII slash. The 0d part is for "dead".
Well, if I had known this, I could've saved us all
I tried 2.4.4-ac2 this morning. The warning about rx_queue_len is
gone :-) but I have one about tx_full_rate:
May 1 12:37:25 oleron cardmgr[150]: + Warning:
/lib/modules/2.4.4-ac2/kernel/drivers/net/aironet4500_core.o
symbol for parameter tx_full_rate not found
That's easily solved by
Leif Sawyer writes:
> Below is the end of a thread between myself and Ted Lemon
> regarding building DHCP under Sparc Linux.
>
> I'm not well versed in parsing the kernel code to know
> what the subtle differences in the different implementations
> of this IOCtl, and am looking for some gu
On Tue, 1 May 2001, David Bronaugh wrote:
> opl3sax cards have refused to init in Linux with the in-kernel OSS driver
> since 2.4.3 at least (last I tested and worked was 2.4.1). I'm pretty sure
> this is a kernel issue as it's happened on 2 different machines, one of
> which I never goofed aroun
On 1 May 2001, Christoph Rohland wrote:
> On Mon, 30 Apr 2001, Alan Cox wrote:
> >> paging in just released 2.4.4, but in previuos kernel, a page that
> >> was paged-out, reserves its place in swap even if it is paged-in
> >> again, so once you have paged-out all your ram at least once, you
> >> c
On Tue, May 01, 2001 at 04:00:53PM -0700, David S. Miller wrote:
>
> Frank, thanks for doing all the legwork to resolve the networking
> side of this problem.
No problem...
I just diff'd the 'old' and 'new' kernel trees. The one which produced the
ravenous skb_hungry kernels was for all intents
> The issue here is that the dead keys themselves
> are producing the wrong characters.
No. If someone without diaeresis key uses the double quote,
and attaches dead_diaeresis to it, she probably wants that
double quote when it is followed by a space.
When programming one needs quotes etc.
When w
Hi,
I am running 2.4.4 with the lvm -0.91 beta7 patches applied on a debian
sid base. When I checked my box this morning the follow greeted me on
the serial console. The reiserfs errors are caused by the DMA timeout.
Note this is a ultra100 controller not supporting raid.
hde: timeout waitin
Below is the end of a thread between myself and Ted Lemon
regarding building DHCP under Sparc Linux.
I'm not well versed in parsing the kernel code to know
what the subtle differences in the different implementations
of this IOCtl, and am looking for some guidance from the
appropriate maintainers
On Fri, Apr 20, 2001 at 02:51:55AM +, Ton Hospel wrote:
> Resettable counters are evil.
Perhaps "evil" should be reserved to describe counters which automatically
reset as a side effect of being read.
> I really think cisco got this right: from the commandline interface
> you can reset count
This is an attempt at a generic PM event interface for the kernel.
The design is more or less obvious and was laid out in a previous
message. Comments appreciated.
Alan Cox <[EMAIL PROTECTED]> writes:
> > > The entire PM layer for the embedded board I worked on was
> > > 3Kbytes. How small will
[EMAIL PROTECTED] writes:
> > See?
>
> I see! Dave, please, take the second Andrea's patch (appended).
> It is really the cleanest one.
Thanks a lot Andrea and Alexey. I've applied the patch.
Later,
David S. Miller
[EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscr
Frank, thanks for doing all the legwork to resolve the networking
side of this problem.
Later,
David S. Miller
[EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/
H. Peter Anvin writes:
> Not correct, there can't be more than 2^15 *directories* in a single
> directory. I belive this is an ext2 limitation.
This is imposed by a number of issues:
- EXT2_LINK_MAX=32000 is checked for new subdirectories
- ext2 bg_used_dirs_count is a __u16
- inode->i_nlink (__
On Tuesday, May 01, 2001 03:11:58 PM -0700 David <[EMAIL PROTECTED]>
wrote:
> Can't say for a definite fact that it was reiserfs but I can say for a
> definite fact that something fishy happens sometimes.
>
> If I have a text file open, something.html comes to mind, If I edit it
> and save it
On Wednesday, May 02, 2001 12:41:52 AM +0200 Daniel Elstner
<[EMAIL PROTECTED]> wrote:
> Hi,
>
> On Mon, 30 Apr 2001 21:03:47 -0400 Chris Mason <[EMAIL PROTECTED]> wrote:
>
>> > Apparently it's a reiserfs/symlink problem.
>> > I tried doing the lndir on an ext2 partition, sources still
>> > o
On Tue, 1 May 2001, Russell King wrote:
>
> In which case, can we change the following in IO-mapping.txt please?
Oh, sorry. I misread your question. The _return_ value is a cookie.
The first argument should basically be the start of a "struct pci_dev"
resource entry, but obviously architecture
Hi,
On Mon, 30 Apr 2001 21:03:47 -0400 Chris Mason <[EMAIL PROTECTED]> wrote:
> > Apparently it's a reiserfs/symlink problem.
> > I tried doing the lndir on an ext2 partition, sources still
> > on reiserfs. And it worked just fine!
>
> Neat, thanks for the extra details. Does that mean you can
OK, cutting to chase:
opl3sax cards have refused to init in Linux with the in-kernel OSS driver
since 2.4.3 at least (last I tested and worked was 2.4.1). I'm pretty sure
this is a kernel issue as it's happened on 2 different machines, one of
which I never goofed around with.
Usually message is
Can't say for a definite fact that it was reiserfs but I can say for a
definite fact that something fishy happens sometimes.
If I have a text file open, something.html comes to mind, If I edit it
and save it in one rxvt and open it in another rxvt, my changes may not
be there. If I save it *a
On Tue, May 01, 2001 at 05:35:12PM -0400, Olivier Galibert wrote:
> On Tue, May 01, 2001 at 12:31:12PM -0400, Eric S. Raymond wrote:
> > You are proposing an interface that will handle easy cases but blow
> > up in the user's face in any hard one. That's poor design, frustrating
> > the user exac
> So it seems that CONFIG_X86_USE_3DNOW is simply used to
> enable access to the routines in mmx.c (the athlon-optimized
> routines on CONFIG_K7 kernels), so then it appears that somehow
> this is corrupting memory / not behaving as it should (very
> technical, right?) :)...
Do you use any u
On Tue, May 01, 2001 at 02:58:59PM -0400, Geoffrey Gallaway wrote:
> I see that the SCSI version of the drive seems to be supported in linux
> but I can only find tidbits of information that don't confirm or deny
> this. Listed below are two sites that have some information which seem
> to confir
Followup to: <[EMAIL PROTECTED]>
By author:Alan Cox <[EMAIL PROTECTED]>
In newsgroup: linux.dev.kernel
>
> > cyrus-imapd i ran into problems.
> > At about 2^15 files the filesystem gave up, telling me that there cannot be
> > more files in a directory.
> >
> > Is this a vfs-Issue or an ext2-
Well,
When a puzzled Alexey wondered whether the problems I was seeing with 2.4.4
might be related to a failure to execute 'make clean' before compiling the
kernel, I replied in the negative as I *always* clean up before compiling
anything. Yet, for the sake of science and such I moved the kernel
On Tue, May 01, 2001 at 12:31:12PM -0400, Eric S. Raymond wrote:
> You are proposing an interface that will handle easy cases but blow
> up in the user's face in any hard one. That's poor design, frustrating
> the user exactly when he/she most needs help.
Yeah, but what is the current method, vi
On Tue, May 01, 2001 at 02:19:33PM -0700, Linus Torvalds wrote:
> On Tue, 1 May 2001, Russell King wrote:
> > Talking around this issue, is there any chance of getting the
> > official use of the first parameter to ioremap documented in
> > Documentation/IO-mapping.txt please? There appears to be
> reserved.But if you did such a hot swap you would have "bigger
> fish to fry" in a HA application... I mean, none of your data would be
> there!
You need to realise this has happened and do the right thing. Since
it could be an md raid array the hotswap is not fatal.
ftp://ftp.kernel.org/pub/linux/kernel/people/alan/2.4/
Intermediate diffs are available from
http://www.bzimage.org
2.4.4-ac3
o Fix hang on boot with SMP (Andrea Arcangeli)
| and fixes a few more uglies too
o
On Tue, 1 May 2001, Russell King wrote:
>
> Talking around this issue, is there any chance of getting the
> official use of the first parameter to ioremap documented in
> Documentation/IO-mapping.txt please? There appears to be
> confusion as to whether it is:
>
> a) PCI bus address
> b) CPU un
> cyrus-imapd i ran into problems.
> At about 2^15 files the filesystem gave up, telling me that there cannot be
> more files in a directory.
>
> Is this a vfs-Issue or an ext2-issue?
Bit of both. You exceeded the max link count, and your performance would have
been abominable too. cyrus should
Alan Cox writes:
> > Does this package also tell the kernel to "re-establish" a
> > reservation for all devices after a bus reset, or at least inform a
> > user level program? Finding out when there has been a bus reset has
> > been a stumbling block for me.
>
> You cannot rely on a bus re
Linus Torvalds wrote:
>
> On Tue, 1 May 2001, H. Peter Anvin wrote:
> >
> > Oh bother, you're right of course. We need some kind of standardized
> > macro for indirecting through a potentially unaligned pointer.
>
> No we don't - because it already exists.
>
> It's called "get_unaligned()".
>
Followup to: <27280.988750082@hades>
By author:Andreas Rogge <[EMAIL PROTECTED]>
In newsgroup: linux.dev.kernel
>
> While trying to create 100.000 (in words: one hundred thousand) Mailboxes
> with
> cyrus-imapd i ran into problems.
> At about 2^15 files the filesystem gave up, telling me
On Tuesday, 1. May 2001 22:49, Erik Hensema wrote:
> Hi,
>
> A little question which may be a FAQ: what does the major version number
> [1] of the Linux kernel (still) mean? What is the policy on increasing the
> major version (eg. on what basis it is decided the next kernel isn't going
> to be 2
On Tue, 1 May 2001, H. Peter Anvin wrote:
>
> Oh bother, you're right of course. We need some kind of standardized
> macro for indirecting through a potentially unaligned pointer.
No we don't - because it already exists.
It's called "get_unaligned()".
Linus
-
To unsubscribe
[EMAIL PROTECTED] said:
> Does this package also tell the kernel to "re-establish" a reservation
> for all devices after a bus reset, or at least inform a user level
> program? Finding out when there has been a bus reset has been a
> stumbling block for me.
[EMAIL PROTECTED] said:
> You cannot
While trying to create 100.000 (in words: one hundred thousand) Mailboxes
with
cyrus-imapd i ran into problems.
At about 2^15 files the filesystem gave up, telling me that there cannot be
more files in a directory.
Is this a vfs-Issue or an ext2-issue?
Andreas Rogge <[EMAIL PROTECTED]>
Availabl
Hi,
A little question which may be a FAQ: what does the major version number
[1] of the Linux kernel (still) mean? What is the policy on increasing the
major version (eg. on what basis it is decided the next kernel isn't going
to be 2.6 but 3.0)?
I'm asking this question because I think there is
> Is this I2O implementation supporting PCI devices ?
Yes
> Yesterday I post something about that, I have a CompactPCI computer with 2
> computers in it. One master and one slave. The slave one, is has a non
> transparent pci-to-pci bridge : DEC (INTEL) 21554, wich support I2O
> messaging, I wan
> Oh bother, you're right of course. We need some kind of standardized
> macro for indirecting through a potentially unaligned pointer. It can
get_unaligned()
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo
> OK I found the explanation now. The reason ksoftirqd was deadlocking on
> me without the explicit clear of SCHED_YIELD in p->policy is because a
> softirq event was pending at the time of the first kernel_thread() and
> then while returning from the syscall it was so taking the ret_from_irq
Oh
> Does this package also tell the kernel to "re-establish" a
> reservation for all devices after a bus reset, or at least inform a
> user level program? Finding out when there has been a bus reset has
> been a stumbling block for me.
You cannot rely on a bus reset. Imagine hot swap disks on an F
> I'm wary of this, because Linus has stated that the current "struct
> pci_dev" is really meant to be a generic thing, and it might change to
> "struct dev" (now that we've renamed the old "struct dev" to "struct
> netdev").
It is already being (ab)used this way. Its an isa pnp device in 2.4.*.
Hello,
I don't know what have changed since 2.4.4-pre6 or 2.4.3-ac13 which are
the last kernel I had tested before 2.4.4 which introduced that sound
problem...
I have a sound card, but I don't load the modules for it: I just use
my DVB-s card from Hauppauge to watch TV or playing DVD.
It seems
> And that's exactly what I did :)... I found that ONLY the combination
> of USE_3DNOW and forcing the athlon mmx stuff in (by doing #if 1 in
> results in this wackiness. I should alos repeat that I *DO* see that
I doubt that USE_3DNOW is causing the problem, but rather when you
USE_3DNOW, th
I'm the owner of that first URL.
The driver works for me. Make sure you enable the "Freecom USB/ATAPI"
support under the USB Mass Storage option in the kernel configuration.
Note that this is only supported for 2.4.x series kernels.
Matt
On Tue, May 01, 2001 at 02:58:59PM -0400, Geoffrey Gall
Hi :)
And that's exactly what I did :)... I found that ONLY the combination
of USE_3DNOW and forcing the athlon mmx stuff in (by doing #if 1 in
mmx.c)
results in this wackiness. I should alos repeat that I *DO* see that
wierdness you described with 3DNOW (in my case, it was that kde locks
up
On Tue, May 01, 2001 at 10:22:39AM -0700, Linus Torvalds wrote:
> I bet that the patch will be smaller too. It's a simple case of
> - do the ioremap() _once_ at bootup, save the result in a static
>variable somewhere.
> - implement the (one-liner) isa_readx/isa_writex functions.
>
> On many
Dan Hollis wrote:
>
> On Tue, 1 May 2001, Seth Goldberg wrote:
> > I Should clarify that this is the KX133A chipset.
>
> No such thing. Surely you mean KT133A. No X.
>
Surely :)... That's what sleep deprivation does to you ;).
--S
-
To unsubscribe from this list: send the line "unsubscr
Wow. My very first pseudo-flame. Thank you for making me feel welcome
;).
--S
Jesper Juhl wrote:
>
> Seth Goldberg wrote:
>
> > Test.
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to [EMAIL PROTECTED]
> > More majordomo info
On Tue, May 01, 2001 at 05:53:12PM +0200, J . A . Magallon wrote:
> What you have todo is to learn how to configure your mailer to display
> headers you want. elm and balsa can do it. Do not know about Outlook...
> (btw, it is curious, mailing to lkml with outlook...)
Outlook express is different
1 - 100 of 216 matches
Mail list logo
