On Tue 05 Mar 16:53 PST 2019, Brian Masney wrote:
> Here are some patches that fix gpio hogging for all boards that use
> spmi-gpio and ssbi-gpio. These depend on the following two patches
> that were merged in 4.20-rc1:
>
> commit 149a96047237 ("pinctrl: qcom: spmi-gpio: fix gpio-hog related
>
On Thu 25 Apr 05:18 PDT 2019, Niklas Cassel wrote:
> The commit description should be: arm64: dts: qcom: qcs404-evb:
>
> (The s3 regulator node moved during upstreaming.)
>
> Andy/Bjorn, could you please fix this before applying?
>
Picked up with the subject change.
Thanks,
Bjorn
> Kind
On Thu 25 Apr 05:34 PDT 2019, Niklas Cassel wrote:
> The current l3 min voltage level is not supported by
> the regulator (the voltage is not a multiple of the regulator step size),
> so a driver requesting this exact voltage would fail, see discussion in:
>
On Mon 15 Apr 09:11 PDT 2019, Jeffrey Hugo wrote:
> diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
> b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
[..]
> + thermal-zones {
> + battery-thermal {
> + polling-delay-passive = <250>;
> +
On Wed 20 Mar 06:39 PDT 2019, Amit Kucheria wrote:
> A couple of fixes to the adc node in PMS405 to get thermistors to work
> correctly.
>
> Amit Kucheria (2):
> arm64: dts: qcom: pms405: calibrate the VADC correctly
> arm64: dts: qcom: pms405: Rename adc outputs as per schematics
>
Picked
unreachable in the current code.
Patch was compile-tested with. x86_64_defconfig + FIELDBUS_DEV=m,
HMS_ANYBUSS_BUS=m
(some unrelated sparse warnings (cast to restricted __be16))
Patch is against 5.1-rc6 (localversion-next is next-20190426)
drivers/staging/fieldbus/anybuss/host.c | 7 +++
1 file
On Fri 29 Mar 01:47 PDT 2019, Amit Kucheria wrote:
> Commit e31f941cf977 ("MAINTAINERS: update list of qcom drivers") had a
> typo in the filename, replace the underscore with dash.
>
> Fixes: e31f941cf977 ("MAINTAINERS: update list of qcom drivers")
> Reported-by: Joe Perches
> Signed-off-by:
On Thu, Apr 25, 2019 at 5:55 PM Ingo Molnar wrote:
> * Aubrey Li wrote:
> > On Wed, Apr 24, 2019 at 10:00 PM Julien Desfossez
> > wrote:
> > >
> > > On 24-Apr-2019 09:13:10 PM, Aubrey Li wrote:
> > > > On Wed, Apr 24, 2019 at 12:18 AM Vineeth Remanan Pillai
> > > > wrote:
> > > > >
> > > > >
Modify uart rx and complete for DMA.
Signed-off-by: Long Cheng
---
drivers/tty/serial/8250/8250_mtk.c | 53
1 file changed, 23 insertions(+), 30 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_mtk.c
b/drivers/tty/serial/8250/8250_mtk.c
index
Add 8250 UART APDMA to support MediaTek UART. If MediaTek UART is
enabled by SERIAL_8250_MT6577, and we can enable this driver to offload
the UART device moving bytes.
Signed-off-by: Long Cheng
Signed-off-by: Sean Wang
---
drivers/dma/mediatek/Kconfig | 11 +
Subject/Topic: Suggestion to the 100,000 Unemployed Persons in Singapore
For Immediate World-Wide Release 26th April 2019 Singapore Time
I would like to suggest the 100,000 unemployed persons in Singapore to
apply for refugee status in developed countries outside of Singapore.
I believe many or
The filename matches mtk-uart-apdma.c.
So using "mtk-uart-apdma.txt" should be better.
And add some property.
Signed-off-by: Long Cheng
---
.../devicetree/bindings/dma/8250_mtk_dma.txt | 33
.../devicetree/bindings/dma/mtk-uart-apdma.txt | 55
2
In Mediatek SOCs, the uart can support DMA function.
Base on DMA engine formwork, we add the DMA code to support uart. And put the
code under drivers/dma/mediatek.
This series contains document bindings, Kconfig to control the function enable
or not,
device tree including interrupt and dma
1. add uart APDMA controller device node
2. add uart 0/1/2/3/4/5 DMA function
Signed-off-by: Long Cheng
---
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 51 +
1 file changed, 51 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
A minor code cleanup.
Signed-off-by: Masahiro Yamada
---
Makefile | 9 +
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/Makefile b/Makefile
index 251ded5..334ef8a 100644
--- a/Makefile
+++ b/Makefile
@@ -988,8 +988,9 @@ vmlinux-dirs:= $(patsubst %/,%,$(filter %/,
This sample works well as builtin.
Signed-off-by: Masahiro Yamada
---
samples/Kconfig | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/samples/Kconfig b/samples/Kconfig
index b98a763..399ae53 100644
--- a/samples/Kconfig
+++ b/samples/Kconfig
@@ -20,8 +20,7 @@ config
The prompt of CONFIG_SAMPLE_SECCOMP claims this is "loadable module
only", which is invalid.
samples/seccomp/ only contains host programs, so having it tristate
is pointless.
Signed-off-by: Masahiro Yamada
---
samples/Kconfig | 4 ++--
samples/seccomp/Makefile | 2 +-
2 files
Do not descend to sub-directories when unneeded.
I used subdir-$(CONFIG_...) for hidraw, seccomp, and statx because
they only contain host programs.
While we are here, let's add SPDX License tag, and sort the directories
alphabetically.
Signed-off-by: Masahiro Yamada
---
samples/Makefile |
Handle samples/ like the other top-level directories to simplify
the Makefile.
Include include/config/auto.conf earlier to evaluate
drivers-$(CONFIG_SAMPLES).
Signed-off-by: Masahiro Yamada
---
Makefile | 18 --
samples/Makefile | 2 +-
2 files changed, 9
(localversion-next is next-20190426)
drivers/staging/greybus/uart.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/greybus/uart.c b/drivers/staging/greybus/uart.c
index b3bffe9..ff18112 100644
--- a/drivers/staging/greybus/uart.c
+++ b/drivers/staging/greybus
On Fri, 26 Apr 2019, Stephen Boyd wrote:
> Quoting Paul Walmsley (2019-04-11 01:27:32)
> > Add common library code for the Analog Bits Wide-Range PLL (WRPLL) IP
> > block, as implemented in TSMC CLN28HPC.
>
> I haven't deeply reviewed at all, but I already get two problems when
> compile testing
On 27/04/19 1:50 AM, Rob Herring wrote:
> On Tue, Apr 23, 2019 at 04:18:13PM +0530, Vignesh Raghavendra wrote:
>> Add binding documentation for TI's HyperBus memory controller present on
>> AM654 SoC.
>>
>> Signed-off-by: Vignesh Raghavendra
>> ---
>>
as coccicheck warning
about usless casting)
Patch is against 5.1-rc6 (localversion-next is next-20190426)
drivers/staging/kpc2000/kpc_dma/fileops.c | 16 +---
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/staging/kpc2000/kpc_dma/fileops.c
b/drivers/staging/kpc2000
On 2019/4/27 0:48, Jean Delvare wrote:
On Fri, 2019-04-26 at 22:23 +0800, Pu Wen wrote:
On 2019/4/26 17:38, Jean Delvare wrote:
I would like you to also document the new supported chipset in
drivers/i2c/busses/Kconfig and Documentation/i2c/busses/i2c-piix4 as
well as in the header comment of
From: Olivier Moysan
[ Upstream commit 5f8a1000c3e630c3ac06f1d664eeaa755bce8823 ]
Allow indexation of sai iec958 controls according
to device id.
Signed-off-by: Olivier Moysan
Signed-off-by: Mark Brown
Signed-off-by: Sasha Levin
---
sound/soc/stm/stm32_sai_sub.c | 7 ---
1 file
From: Olivier Moysan
[ Upstream commit b8468192971807c43a80d6e2c41f83141cb7b211 ]
Change capabilities exposed in SAI S/PDIF mode, to match
actually supported formats.
In S/PDIF mode only 32 bits stereo is supported.
Signed-off-by: Olivier Moysan
Signed-off-by: Mark Brown
Signed-off-by: Sasha
From: John Hsu
[ Upstream commit 54d1cf78b0f4ba348a7c7fb8b7d0708d71b6cc8a ]
The driver changes the stream name of DAC and ADC to avoid the issue of
widget with prefixed name. When the machine adds prefixed name for codec,
the stream name of DAI may not find the widgets.
Signed-off-by: John Hsu
From: Rander Wang
[ Upstream commit 570f18b6a8d1f0e60e8caf30e66161b6438dcc91 ]
On HDaudio platforms, if playback is started when capture is working,
there is no audible output.
This can be root-caused to the use of the rx|tx_mask to store an HDaudio
stream tag.
If capture is stared before
From: Rander Wang
[ Upstream commit 03d0aa4d4fddce4a5d865d819a4d98bfc3d451e6 ]
The current implementation of the hdac_hda codec results in zero-valued
samples on capture and noise with headset playback when SOF is used on
platforms with an on-board HDaudio codec. This is root-caused to SOF
From: Rander Wang
[ Upstream commit c899df3e9b0bf7b76e642aed1a214582ea7012d5 ]
If playback and capture are enabled concurrently, when the capture stops
the output becomes inaudile. The playback application will become stuck
and underrun after a timeout.
This is caused by mistaken use of the
From: Olivier Moysan
[ Upstream commit 26f98e82dd49b7c3cc5ef0edd882aa732a62b672 ]
When snd_pcm_stop_xrun() is called in interrupt routine,
substream context may have already been released.
Add protection on substream context.
Signed-off-by: Olivier Moysan
Signed-off-by: Mark Brown
From: Sylwester Nawrocki
[ Upstream commit 2b13bee3884926cba22061efa75bd315e871de24 ]
After commit fbeec965b8d1c ("ASoC: samsung: odroid: Fix 32000 sample rate
handling") the audio root clock frequency is configured improperly for
44100 sample rate. Due to clock rate rounding it's 20070401 Hz
From: Shuming Fan
[ Upstream commit 4834d7070c85a5fb69637265dbbb05d13043280c ]
The IRQ function may not work when system suspend.
We remove snd_soc_dapm_force_enable_pin function call to
make sure the bias off when idle and run into suspend/resume function.
Signed-off-by: Shuming Fan
From: John Hsu
[ Upstream commit 844a4a362dbec166b44d6b9b3dd45b08cb273703 ]
The driver has two issues when machine add prefix name for codec.
(1)The stream name of DAI can't find the AIF widgets.
(2)The drivr can enable/disalbe the MICBIAS and SAR widgets.
The patch will fix these issues
From: Shuming Fan
[ Upstream commit 1c5b6a27e432e4fe170a924c8b41012271496a4c ]
If ASRC turns on, HW will use clk_dac as the reference clock
whether recording or playback.
Both of clk_dac and clk_adc should set proper clock while using ASRC.
Signed-off-by: Shuming Fan
Signed-off-by: Mark Brown
From: KaiChieh Chuang
[ Upstream commit a9764869779081e8bf24da07ac040e8f3efcf13a ]
The dpcm get from fe_clients/be_clients
may be free before use
Add a spin lock at snd_soc_card level,
to protect the dpcm instance.
The lock may be used in atomic context, so use spin lock.
Use irq spin lock
From: Maxime Jourdan
[ Upstream commit 9b70c697e87286ade406e6a02091757307dd4b7c ]
We want the video decoder clocks to always round to closest. While the
muxes are already using CLK_MUX_ROUND_CLOSEST, the corresponding
CLK_DIVIDER_ROUND_CLOSEST was forgotten for the dividers.
Fix this by adding
From: Daniel Mack
[ Upstream commit f0f2338a9cfaf71db895fa989ea7234e8a9b471d ]
The CS4270 does not by default increment the register address on
consecutive writes. During normal operation it doesn't matter as all
register accesses are done individually. At resume time after suspend,
however,
From: Jerome Brunet
[ Upstream commit 6246f283d5e02ac757bd8d9bacde8fdc54c4582d ]
If for any reason, the backend does not have the requested substream
(like capture on a playback only backend), the BE will be skipped in
dpcm_be_dai_startup().
However, dpcm_apply_symmetry() does not skip those
From: Olivier Moysan
[ Upstream commit c47255b61129857b74b0d86eaf59335348be05e0 ]
Register platform component with a prefix, to avoid warnings
on debugfs entries creation, due to component name
redundancy.
Signed-off-by: Olivier Moysan
Signed-off-by: Mark Brown
Signed-off-by: Sasha Levin
From: Olivier Moysan
[ Upstream commit 19441e35a43b616ea6afad91ed0d9e77268d8f6a ]
The DFSDM must be stopped when a new setting is applied.
restart systematically DFSDM on multiple prepare calls,
to apply changes.
Signed-off-by: Olivier Moysan
Signed-off-by: Mark Brown
Signed-off-by: Sasha
From: Stephane Eranian
[ Upstream commit 583feb08e7f7ac9d533b446882eb3a54737a6dbb ]
When an event is programmed with attr.wakeup_events=N (N>0), it means
the caller is interested in getting a user level notification after
N samples have been recorded in the kernel sampling buffer.
With precise
From: Jann Horn
[ Upstream commit a0fe2c6479aab5723239b315ef1b552673f434a3 ]
Use parentheses around uses of the argument in u64_to_user_ptr() to
ensure that the cast doesn't apply to part of the argument.
There are existing uses of the macro of the form
u64_to_user_ptr(A + B)
which expands
From: Sugar Zhang
[ Upstream commit c85064435fe7a216ec0f0238ef2b8f7cd850a450 ]
This is because set_fmt ops maybe called when PD is off,
and in such case, regmap_ops will lead system hang.
enale PD before doing regmap_ops.
Signed-off-by: Sugar Zhang
Signed-off-by: Mark Brown
Signed-off-by:
From: YueHaibing
[ Upstream commit 27fad74a5a77fe2e1f876db7bf27efcf2ec304b2 ]
If CONFIG_CRYPTO is not set or set to m,
gcc building warn this:
lib/iov_iter.o: In function `hash_and_copy_to_iter':
iov_iter.c:(.text+0x9129): undefined reference to `crypto_stats_get'
iov_iter.c:(.text+0x9152):
From: Qian Cai
[ Upstream commit fcf88917dd435c6a4cb2830cb086ee58605a1d85 ]
The commit 510ded33e075 ("slab: implement slab_root_caches list")
changes the name of the list node within "struct kmem_cache" from "list"
to "root_caches_node", but leaks_show() still use the "list" which
causes a
From: Charles Keepax
[ Upstream commit 47c4cc08cb5b34e93ab337b924c5ede77ca3c936 ]
The chips main power supplies VA and VP are enabled during probe but
then never disabled, this will cause warnings from the regulator
framework on driver removal. Fix this by adding a remove callback and
disabling
From: Josh Poimboeuf
[ Upstream commit 4fa5ecda2bf96be7464eb406df8aba9d89260227 ]
This fixes the following warning seen on GCC 7.3:
arch/x86/kernel/dumpstack.o: warning: objtool: oops_end() falls through to
next function show_regs()
Reported-by: kbuild test robot
Signed-off-by: Josh
From: Kamal Heib
[ Upstream commit ea7a5c706fa49273cf6d1d9def053ecb50db2076 ]
Make sure to free the DSR on pvrdma_pci_remove() to avoid the memory leak.
Fixes: 29c8d9eba550 ("IB: Add vmw_pvrdma driver")
Signed-off-by: Kamal Heib
Acked-by: Adit Ranadive
Signed-off-by: Jason Gunthorpe
From: Ondrej Jirman
[ Upstream commit 1a07a94b47b1f528f39c3e6187b5eaf02efe44ea ]
There are two problems here:
1. Not all clk_data->hws[] need to be initialized, depending on various
configured quirks. This leads to NULL ptr deref in
clk_hw_unregister_gate() in sun8i_tcon_top_unbind()
2.
From: Lijun Ou
[ Upstream commit 4772e03d239484f3461e33c79d721c8ea03f7416 ]
Due to the incorrect use of the seg and obj information, the position of
the mtt is calculated incorrectly, and the free space of the page is not
enough to store the entire mtt, resulting in access to the next page.
From: Longpeng
[ Upstream commit 6a8aae68c87349dbbcd46eac380bc43cdb98a13b ]
If the msix_affinity_masks is alloced failed, then we'll
try to free some resources in vp_free_vectors() that may
access it directly.
We met the following stack in our production:
[ 29.296767] BUG: unable to handle
From: "ndesaulni...@google.com"
[ Upstream commit be24b37e22c20cbaa891971616784dd0f35211e8 ]
Fixes the warning reported by Clang:
security/keys/trusted.c:146:17: warning: passing an object that
undergoes default
argument promotion to 'va_start' has undefined behavior [-Wvarargs]
From: Varun Prakash
[ Upstream commit 5c2442fd78998af60e13aba506d103f7f43f8701 ]
If scsi cmd sglist is not suitable for DDP then csiostor driver uses
preallocated buffers for DDP, because of this data copy is required from
DDP buffer to scsi cmd sglist before calling ->scsi_done().
From: Wangyan Wang
[ Upstream commit 827abdd024207146822f66ba3ba74867135866b9 ]
This is the first step to make MT2701 hdmi stable.
The parent rate of hdmi phy had set by DPI driver.
We should not set or change the parent rate of MT2701 hdmi phy,
as a result we should remove the flags of
From: Brian Norris
[ Upstream commit 771acc7e4a6e5dba779cb1a7fd851a164bc81033 ]
Badly-designed systems might have (for example) active-high wake pins
that default to high (e.g., because of external pull ups) until they
have an active firmware which starts driving it low. This can cause an
From: David Müller
[ Upstream commit 7c2e07130090ae001a97a6b65597830d6815e93e ]
Since commit 648e921888ad ("clk: x86: Stop marking clocks as
CLK_IS_CRITICAL"), the pmc_plt_clocks of the Bay Trail SoC are
unconditionally gated off. Unfortunately this will break systems where these
clocks are
From: Tzung-Bi Shih
[ Upstream commit d6ba3f815bc5f3c4249d15c8bc5fbb012651b4a4 ]
Fix wrong setting on number of channels. The context wants to set
constraint to 2 channels instead of 4.
Signed-off-by: Tzung-Bi Shih
Acked-by: Pierre-Louis Bossart
Signed-off-by: Mark Brown
Signed-off-by:
From: Stephen Boyd
[ Upstream commit b995dcca7cf12f208cfd95fd9d5768dca7cccec7 ]
It's used by probe and that isn't an init function. Drop this so that we
don't get a section mismatch.
Reported-by: kbuild test robot
Cc: David Müller
Cc: Hans de Goede
Cc: Andy Shevchenko
Fixes: 7c2e07130090
From: Russell King
[ Upstream commit 2e95f984aae4cf0608d0ba2189c756f2bd50b44a ]
When using the S/PDIF DAI, there is no requirement to call
snd_soc_dai_set_fmt() as there is no DAI format definition that defines
S/PDIF. In any case, S/PDIF does not have separate clocks, this is
embedded into
From: Paolo Valente
[ Upstream commit eed47d19d9362bdd958e4ab56af480b9dbf6b2b6 ]
The function bfq_bfqq_expire() invokes the function
__bfq_bfqq_expire(), and the latter may free the in-service bfq-queue.
If this happens, then no other instruction of bfq_bfqq_expire() must
be executed, or a
From: Tetsuo Handa
[ Upstream commit 7c2bd9a39845bfb6d72ddb55ce737650271f6f96 ]
syzbot is reporting uninitialized value at rpc_sockaddr2uaddr() [1]. This
is because syzbot is setting AF_INET6 to "struct sockaddr_in"->sin_family
(which is embedded into user-visible "struct nfs_mount_data"
From: Ming Lei
[ Upstream commit 1b8f21b74c3c9c82fce5a751d7aefb7cc0b8d33d ]
In NVMe's error handler, follows the typical steps of tearing down
hardware for recovering controller:
1) stop blk_mq hw queues
2) stop the real hw queues
3) cancel in-flight requests via
From: James Smart
[ Upstream commit 67f471b6ed3b09033c4ac77ea03f92afdb1989fe ]
This patch fixes a long-standing bug that initialized the FC-NVME
cmnd iu CSN value to 1. Early FC-NVME specs had the connection starting
with CSN=1. By the time the spec reached approval, the language had
changed to
From: Linus Torvalds
[ Upstream commit f958d7b528b1b40c44cfda5eabe2d82760d868c3 ]
We have a VM_BUG_ON() to check that the page reference count doesn't
underflow (or get close to overflow) by checking the sign of the count.
That's all fine, but we actually want to allow people to use a "get
From: Joerg Roedel
[ Upstream commit 3c677d206210f53a4be972211066c0f1cd47fe12 ]
The exlcusion range limit register needs to contain the
base-address of the last page that is part of the range, as
bits 0-11 of this register are treated as 0xfff by the
hardware for comparisons.
So correctly set
From: Stephane Eranian
[ Upstream commit 583feb08e7f7ac9d533b446882eb3a54737a6dbb ]
When an event is programmed with attr.wakeup_events=N (N>0), it means
the caller is interested in getting a user level notification after
N samples have been recorded in the kernel sampling buffer.
With precise
From: John Hsu
[ Upstream commit 54d1cf78b0f4ba348a7c7fb8b7d0708d71b6cc8a ]
The driver changes the stream name of DAC and ADC to avoid the issue of
widget with prefixed name. When the machine adds prefixed name for codec,
the stream name of DAI may not find the widgets.
Signed-off-by: John Hsu
From: Kaike Wan
[ Upstream commit a8639a79e85c18c16c10089edd589c7948f19bbd ]
When an old ack_queue entry is used to store an incoming request, it may
need to clean up the old entry if it is still referencing the
MR. Originally only RDMA READ request needed to reference MR on the
responder side
From: John Hsu
[ Upstream commit 844a4a362dbec166b44d6b9b3dd45b08cb273703 ]
The driver has two issues when machine add prefix name for codec.
(1)The stream name of DAI can't find the AIF widgets.
(2)The drivr can enable/disalbe the MICBIAS and SAR widgets.
The patch will fix these issues
From: Sylwester Nawrocki
[ Upstream commit 2b13bee3884926cba22061efa75bd315e871de24 ]
After commit fbeec965b8d1c ("ASoC: samsung: odroid: Fix 32000 sample rate
handling") the audio root clock frequency is configured improperly for
44100 sample rate. Due to clock rate rounding it's 20070401 Hz
From: Shuming Fan
[ Upstream commit 1c5b6a27e432e4fe170a924c8b41012271496a4c ]
If ASRC turns on, HW will use clk_dac as the reference clock
whether recording or playback.
Both of clk_dac and clk_adc should set proper clock while using ASRC.
Signed-off-by: Shuming Fan
Signed-off-by: Mark Brown
From: Dan Carpenter
[ Upstream commit 2d85978341e6a32e7443d9f28639da254d53f400 ]
We don't want to overwrite "ret", it already holds the correct error
code. The "regmap" variable might be a valid pointer as this point.
Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support")
Signed-off-by: Dan
From: Maxime Jourdan
[ Upstream commit 9b70c697e87286ade406e6a02091757307dd4b7c ]
We want the video decoder clocks to always round to closest. While the
muxes are already using CLK_MUX_ROUND_CLOSEST, the corresponding
CLK_DIVIDER_ROUND_CLOSEST was forgotten for the dividers.
Fix this by adding
From: Pankaj Bharadiya
[ Upstream commit cacea3a90e211f0c111975535508d446a4a928d2 ]
w_text_param can be NULL and it is being dereferenced without checking.
Add the missing sanity check to prevent NULL pointer dereference.
Signed-off-by: Pankaj Bharadiya
Acked-by: Pierre-Louis Bossart
From: Charles Keepax
[ Upstream commit a2225a6d155fcb247fe4c6d87f7c91807462966d ]
Best to lock across handling the bus error to ensure the DSP doesn't
change power state as we are reading the status registers.
Signed-off-by: Charles Keepax
Signed-off-by: Mark Brown
Signed-off-by: Sasha Levin
From: Daniel Mack
[ Upstream commit f0f2338a9cfaf71db895fa989ea7234e8a9b471d ]
The CS4270 does not by default increment the register address on
consecutive writes. During normal operation it doesn't matter as all
register accesses are done individually. At resume time after suspend,
however,
From: Olivier Moysan
[ Upstream commit 19441e35a43b616ea6afad91ed0d9e77268d8f6a ]
The DFSDM must be stopped when a new setting is applied.
restart systematically DFSDM on multiple prepare calls,
to apply changes.
Signed-off-by: Olivier Moysan
Signed-off-by: Mark Brown
Signed-off-by: Sasha
From: Rander Wang
[ Upstream commit c899df3e9b0bf7b76e642aed1a214582ea7012d5 ]
If playback and capture are enabled concurrently, when the capture stops
the output becomes inaudile. The playback application will become stuck
and underrun after a timeout.
This is caused by mistaken use of the
From: Sugar Zhang
[ Upstream commit c85064435fe7a216ec0f0238ef2b8f7cd850a450 ]
This is because set_fmt ops maybe called when PD is off,
and in such case, regmap_ops will lead system hang.
enale PD before doing regmap_ops.
Signed-off-by: Sugar Zhang
Signed-off-by: Mark Brown
Signed-off-by:
From: Jann Horn
[ Upstream commit a0fe2c6479aab5723239b315ef1b552673f434a3 ]
Use parentheses around uses of the argument in u64_to_user_ptr() to
ensure that the cast doesn't apply to part of the argument.
There are existing uses of the macro of the form
u64_to_user_ptr(A + B)
which expands
From: Charles Keepax
[ Upstream commit 47c4cc08cb5b34e93ab337b924c5ede77ca3c936 ]
The chips main power supplies VA and VP are enabled during probe but
then never disabled, this will cause warnings from the regulator
framework on driver removal. Fix this by adding a remove callback and
disabling
From: Kaike Wan
[ Upstream commit d0294344470e6b52d097aa7369173f32d11f2f52 ]
The receive side mapping (RSM) on hfi1 hardware is a special
matching mechanism to direct an incoming packet to a given
hardware receive context. It has 4 instances of matching capabilities
(RSM0 - RSM3) that share the
From: Max Filippov
[ Upstream commit 2663147dc7465cb29040a05cc4286fdd839978b5 ]
New pt_regs should indicate that there's no syscall, not that there's
syscall #0. While at it wrap macro body in do/while and parenthesize
macro arguments.
Signed-off-by: Max Filippov
Signed-off-by: Sasha Levin
From: tiancyin
[ Upstream commit c1cefe115d1cdc460014483319d440b2f0d07c68 ]
[Why]
the member sdr_white_level of struct dc_cursor_attributes was not
initialized, then the random value result that
dcn10_set_cursor_sdr_white_level() set error hw_scale value 0x20D9(normal
value is 0x3c00), this
From: Josh Poimboeuf
[ Upstream commit 4fa5ecda2bf96be7464eb406df8aba9d89260227 ]
This fixes the following warning seen on GCC 7.3:
arch/x86/kernel/dumpstack.o: warning: objtool: oops_end() falls through to
next function show_regs()
Reported-by: kbuild test robot
Signed-off-by: Josh
From: Kamal Heib
[ Upstream commit ea7a5c706fa49273cf6d1d9def053ecb50db2076 ]
Make sure to free the DSR on pvrdma_pci_remove() to avoid the memory leak.
Fixes: 29c8d9eba550 ("IB: Add vmw_pvrdma driver")
Signed-off-by: Kamal Heib
Acked-by: Adit Ranadive
Signed-off-by: Jason Gunthorpe
From: Peter Zijlstra
[ Upstream commit 1d54ad944074010609562da5c89e4f5df2f4e5db ]
Thomas-Mich Richter reported he triggered a WARN()ing from
event_function_local()
on his s390. The problem boils down to:
CPU-A CPU-B
perf_event_overflow()
From: Varun Prakash
[ Upstream commit 5c2442fd78998af60e13aba506d103f7f43f8701 ]
If scsi cmd sglist is not suitable for DDP then csiostor driver uses
preallocated buffers for DDP, because of this data copy is required from
DDP buffer to scsi cmd sglist before calling ->scsi_done().
From: Tetsuo Handa
[ Upstream commit 7c2bd9a39845bfb6d72ddb55ce737650271f6f96 ]
syzbot is reporting uninitialized value at rpc_sockaddr2uaddr() [1]. This
is because syzbot is setting AF_INET6 to "struct sockaddr_in"->sin_family
(which is embedded into user-visible "struct nfs_mount_data"
From: Dongli Zhang
[ Upstream commit bf348f9b78d413e75bb079462751a1d86b6de36c ]
When tag_set->nr_maps is 1, the block layer limits the number of hw queues
by nr_cpu_ids. No matter how many hw queues are used by virtio-blk, as it
has (tag_set->nr_maps == 1), it can use at most nr_cpu_ids hw
From: Brian Norris
[ Upstream commit 771acc7e4a6e5dba779cb1a7fd851a164bc81033 ]
Badly-designed systems might have (for example) active-high wake pins
that default to high (e.g., because of external pull ups) until they
have an active firmware which starts driving it low. This can cause an
From: Lijun Ou
[ Upstream commit 4772e03d239484f3461e33c79d721c8ea03f7416 ]
Due to the incorrect use of the seg and obj information, the position of
the mtt is calculated incorrectly, and the free space of the page is not
enough to store the entire mtt, resulting in access to the next page.
From: Rander Wang
[ Upstream commit 570f18b6a8d1f0e60e8caf30e66161b6438dcc91 ]
On HDaudio platforms, if playback is started when capture is working,
there is no audible output.
This can be root-caused to the use of the rx|tx_mask to store an HDaudio
stream tag.
If capture is stared before
From: Annaliese McDermond
[ Upstream commit c63adb28f6d913310430f14c69f0a2ea55eed0cc ]
The common pins were mistakenly not added to the DAPM graph.
Adding these pins will allow valid graphs to be created.
Signed-off-by: Annaliese McDermond
Signed-off-by: Mark Brown
Signed-off-by: Sasha Levin
From: Russell King
[ Upstream commit 2e95f984aae4cf0608d0ba2189c756f2bd50b44a ]
When using the S/PDIF DAI, there is no requirement to call
snd_soc_dai_set_fmt() as there is no DAI format definition that defines
S/PDIF. In any case, S/PDIF does not have separate clocks, this is
embedded into
From: Sylwester Nawrocki
[ Upstream commit 2b13bee3884926cba22061efa75bd315e871de24 ]
After commit fbeec965b8d1c ("ASoC: samsung: odroid: Fix 32000 sample rate
handling") the audio root clock frequency is configured improperly for
44100 sample rate. Due to clock rate rounding it's 20070401 Hz
From: Daniel Mack
[ Upstream commit f0f2338a9cfaf71db895fa989ea7234e8a9b471d ]
The CS4270 does not by default increment the register address on
consecutive writes. During normal operation it doesn't matter as all
register accesses are done individually. At resume time after suspend,
however,
From: Kaike Wan
[ Upstream commit a8639a79e85c18c16c10089edd589c7948f19bbd ]
When an old ack_queue entry is used to store an incoming request, it may
need to clean up the old entry if it is still referencing the
MR. Originally only RDMA READ request needed to reference MR on the
responder side
From: John Hsu
[ Upstream commit 54d1cf78b0f4ba348a7c7fb8b7d0708d71b6cc8a ]
The driver changes the stream name of DAC and ADC to avoid the issue of
widget with prefixed name. When the machine adds prefixed name for codec,
the stream name of DAI may not find the widgets.
Signed-off-by: John Hsu
1 - 100 of 867 matches
Mail list logo
