Hi Luca,
On 30/07/2013 22:21, Luciano Coelho wrote:
Add device tree bindings documentation for the TI WiLink modules.
Currently only the WLAN part of the WiLink6, WiLink7 and WiLink8
modules is supported.
Signed-off-by: Luciano Coelho
---
In v3, use IRQ_TYPE_LEVEL_HIGH in the example, as
+ Roger
Hi George,
Yes, I had some comment about the "ti'type" in Roger's series that will
be applicable here as well.
On 14/08/2013 16:16, George Cherian wrote:
+Benoit
If you dont have any comments, can you take this for 3.12?
Regards
-George
On 7/10/2013 1:44 PM, George Cherian
Hi Ruslan,
On 14/08/2013 10:35, Ruslan Bilovol wrote:
Hello,
There is no functional changes between v1 and v2 - just
added the patch for omap4-var-som - Uri Yosef confirmed
this board have the same connection of OMAP4<->TWL6030 as
SDP4430 board
The series looks good to me, but it will be
Hi Roger,
On 01/08/2013 16:05, Roger Quadros wrote:
> Split otghs_ctrl and USB2 PHY power down into separate
> omap-control-usb nodes. Update ti,mode property.
Nit: I guess you mean ti,type?
> CC: Benoit Cousson
> Signed-off-by: Roger Quadros
> ---
> arch/arm/boot/dts
Hi Lee,
Thanks for that cleanup.
On 14/08/2013 09:30, Tony Lindgren wrote:
* Lee Jones [130813 08:51]:
Tony, Benoit,
Poke
Looks like Benoit's new email address is bcous...@baylibre.com.
Probably best for Benoit to pick these to avoid merge conflicts.
I've just applied the 7 following
Hi Lee,
Thanks for that cleanup.
On 14/08/2013 09:30, Tony Lindgren wrote:
* Lee Jones lee.jo...@linaro.org [130813 08:51]:
Tony, Benoit,
Poke
Looks like Benoit's new email address is bcous...@baylibre.com.
Probably best for Benoit to pick these to avoid merge conflicts.
I've just
Hi Roger,
On 01/08/2013 16:05, Roger Quadros wrote:
Split otghs_ctrl and USB2 PHY power down into separate
omap-control-usb nodes. Update ti,mode property.
Nit: I guess you mean ti,type?
CC: Benoit Cousson benoit.cous...@linaro.org
Signed-off-by: Roger Quadros rog...@ti.com
---
arch/arm
Hi Ruslan,
On 14/08/2013 10:35, Ruslan Bilovol wrote:
Hello,
There is no functional changes between v1 and v2 - just
added the patch for omap4-var-som - Uri Yosef confirmed
this board have the same connection of OMAP4-TWL6030 as
SDP4430 board
The series looks good to me, but it will be good
+ Roger
Hi George,
Yes, I had some comment about the ti'type in Roger's series that will
be applicable here as well.
On 14/08/2013 16:16, George Cherian wrote:
+Benoit
If you dont have any comments, can you take this for 3.12?
Regards
-George
On 7/10/2013 1:44 PM, George Cherian wrote:
Hi Luca,
On 30/07/2013 22:21, Luciano Coelho wrote:
Add device tree bindings documentation for the TI WiLink modules.
Currently only the WLAN part of the WiLink6, WiLink7 and WiLink8
modules is supported.
Signed-off-by: Luciano Coelho coe...@ti.com
---
In v3, use IRQ_TYPE_LEVEL_HIGH in the
On 13/08/2013 16:45, Kishon Vijay Abraham I wrote:
Hi,
On Tuesday 13 August 2013 06:51 PM, Benoit Cousson wrote:
Hi Kishon,
On 12/08/2013 11:37, Kishon Vijay Abraham I wrote:
SMPS10 has two outputs OUT1 and OUT2. Hence SMPS10 is modeled as
two regulators. The dt node is split to reflect
On 13/08/2013 15:36, Pavel Machek wrote:
Hi!
I finally got released by the aliens. It took longer than expected
and beside a small scar on the back of my neck, I feel pretty OK.
Scars on neck sound scary...
The order should not matter at all in DT, it should be a static
representation of
Hi lars,
On 07/08/2013 17:11, Lars Poeschel wrote:
On Wednesday 07 August 2013 at 16:53:09, Mark Rutland wrote:
On Wed, Aug 07, 2013 at 12:06:32PM +0100, Lars Poeschel wrote:
From: Lars Poeschel
Following commit ff5c9059 and therefore other omap platforms using
the gpio-omap driver correct
Hi Kishon,
On 12/08/2013 11:37, Kishon Vijay Abraham I wrote:
SMPS10 has two outputs OUT1 and OUT2. Hence SMPS10 is modeled as
two regulators. The dt node is split to reflect it.
Mmm, I'm curious. How is it supposed to work?
Do you have dedicated control on each output?
Otherwise, it should
Salut Alexandre,
On 03/08/2013 20:00, Alexandre Belloni wrote:
ARM Performance Monitor Units are available on the am33xx, add the support in
the dtsi.
Tested with perf and oprofile on a regular beaglebone.
Signed-off-by: Alexandre Belloni
Thanks, applied for 3.12.
Regards,
Benoit
--
To
Hi Pavel,
I finally got released by the aliens. It took longer than expected and
beside a small scar on the back of my neck, I feel pretty OK.
I just have few cosmetic comments on top of Javier's ones.
On 11/08/2013 17:02, Javier Martinez Canillas wrote:
Hi Pavel,
some minor comments about
Hi Pavel,
I finally got released by the aliens. It took longer than expected and
beside a small scar on the back of my neck, I feel pretty OK.
I just have few cosmetic comments on top of Javier's ones.
On 11/08/2013 17:02, Javier Martinez Canillas wrote:
Hi Pavel,
some minor comments about
Salut Alexandre,
On 03/08/2013 20:00, Alexandre Belloni wrote:
ARM Performance Monitor Units are available on the am33xx, add the support in
the dtsi.
Tested with perf and oprofile on a regular beaglebone.
Signed-off-by: Alexandre Belloni alexandre.bell...@free-electrons.com
Thanks, applied
Hi Kishon,
On 12/08/2013 11:37, Kishon Vijay Abraham I wrote:
SMPS10 has two outputs OUT1 and OUT2. Hence SMPS10 is modeled as
two regulators. The dt node is split to reflect it.
Mmm, I'm curious. How is it supposed to work?
Do you have dedicated control on each output?
Otherwise, it should
Hi lars,
On 07/08/2013 17:11, Lars Poeschel wrote:
On Wednesday 07 August 2013 at 16:53:09, Mark Rutland wrote:
On Wed, Aug 07, 2013 at 12:06:32PM +0100, Lars Poeschel wrote:
From: Lars Poeschel poesc...@lemonage.de
Following commit ff5c9059 and therefore other omap platforms using
the
On 13/08/2013 15:36, Pavel Machek wrote:
Hi!
I finally got released by the aliens. It took longer than expected
and beside a small scar on the back of my neck, I feel pretty OK.
Scars on neck sound scary...
The order should not matter at all in DT, it should be a static
representation of
On 13/08/2013 16:45, Kishon Vijay Abraham I wrote:
Hi,
On Tuesday 13 August 2013 06:51 PM, Benoit Cousson wrote:
Hi Kishon,
On 12/08/2013 11:37, Kishon Vijay Abraham I wrote:
SMPS10 has two outputs OUT1 and OUT2. Hence SMPS10 is modeled as
two regulators. The dt node is split to reflect
5-uevm.dts | 78
> --
> 1 file changed, 49 insertions(+), 29 deletions(-)
>
> Regards,
> Nishanth Menon
For the whole series:
Acked-by: Benoit Cousson
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
t
Hi Nishanth,
On 29/07/2013 15:17, Nishanth Menon wrote:
> On 07/29/2013 04:57 AM, Keerthy wrote:
>> Hi Nishanth,
>>
>> On Wednesday 17 July 2013 10:15 PM, Nishanth Menon wrote:
>>> Due to wrong older revision of documentation used as reference, we
>>> seem to have a bunch of LDOs wrongly
Hi Nishanth,
On 29/07/2013 15:17, Nishanth Menon wrote:
On 07/29/2013 04:57 AM, Keerthy wrote:
Hi Nishanth,
On Wednesday 17 July 2013 10:15 PM, Nishanth Menon wrote:
Due to wrong older revision of documentation used as reference, we
seem to have a bunch of LDOs wrongly configured on OMAP5
deletions(-)
Regards,
Nishanth Menon
For the whole series:
Acked-by: Benoit Cousson benoit.cous...@gmail.com
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Joel,
On 06/26/2013 05:28 AM, Joel A Fernandes wrote:
> On Tue, Jun 25, 2013 at 8:23 PM, Joel A Fernandes wrote:
>> From: Joel A Fernandes
>>
>> This series is fixes to get MMC working on AM33XX without HWMOD data.
>> On removal of HWMOD data, interrupt and register properties need to be
>>
Hi Joel,
On 06/26/2013 05:28 AM, Joel A Fernandes wrote:
On Tue, Jun 25, 2013 at 8:23 PM, Joel A Fernandes joelag...@ti.com wrote:
From: Joel A Fernandes agnel.j...@gmail.com
This series is fixes to get MMC working on AM33XX without HWMOD data.
On removal of HWMOD data, interrupt and
Hi Tony,
On 06/24/2013 12:19 PM, Tony Lindgren wrote:
> Hi,
>
> For merging this series, I suggest the following sets:
>
> * Joel A Fernandes [130620 14:13]:
>>
>> Joel A Fernandes (3):
>> edma: config: Enable config options for EDMA
>> da8xx: config: Enable MMC and FS options
>> ARM:
Hi Tony,
On 06/24/2013 12:19 PM, Tony Lindgren wrote:
Hi,
For merging this series, I suggest the following sets:
* Joel A Fernandes joelag...@ti.com [130620 14:13]:
Joel A Fernandes (3):
edma: config: Enable config options for EDMA
da8xx: config: Enable MMC and FS options
ARM:
On 06/19/2013 09:05 AM, Roger Quadros wrote:
On 06/19/2013 03:23 PM, Benoit Cousson wrote:
On 06/19/2013 07:05 AM, Florian Vaussard wrote:
Hello,
On 06/19/2013 01:03 PM, Roger Quadros wrote:
On 06/19/2013 01:10 PM, Benoit Cousson wrote:
On 06/19/2013 02:46 AM, Tony Lindgren wrote:
* Roger
On 06/19/2013 09:05 AM, Roger Quadros wrote:
On 06/19/2013 03:23 PM, Benoit Cousson wrote:
On 06/19/2013 07:05 AM, Florian Vaussard wrote:
Hello,
On 06/19/2013 01:03 PM, Roger Quadros wrote:
On 06/19/2013 01:10 PM, Benoit Cousson wrote:
On 06/19/2013 02:46 AM, Tony Lindgren wrote:
* Roger
Hi Tony,
On 06/19/2013 07:27 AM, Tony Lindgren wrote:
* Benoit Cousson [130619 03:17]:
On 06/19/2013 02:46 AM, Tony Lindgren wrote:
We have a similar issue with the MMC1 PBIAS. I think in the long run we
should expand regulator (and possibly pinctrl) framework(s) to handle
comparators. We
On 06/19/2013 07:05 AM, Florian Vaussard wrote:
Hello,
On 06/19/2013 01:03 PM, Roger Quadros wrote:
On 06/19/2013 01:10 PM, Benoit Cousson wrote:
On 06/19/2013 02:46 AM, Tony Lindgren wrote:
* Roger Quadros [130619 00:42]:
Hi Benoit,
On 06/19/2013 04:17 AM, Benoit Cousson wrote:
Hi Roger
On 06/19/2013 06:03 AM, Roger Quadros wrote:
On 06/19/2013 01:10 PM, Benoit Cousson wrote:
On 06/19/2013 02:46 AM, Tony Lindgren wrote:
* Roger Quadros [130619 00:42]:
Hi Benoit,
On 06/19/2013 04:17 AM, Benoit Cousson wrote:
Hi Roger,
On 06/18/2013 11:04 AM, Roger Quadros wrote:
Provide
Hi Afzal,
On 06/14/2013 09:03 AM, Afzal Mohammed wrote:
Add AM43x ePOS EVM minimal DT source - this is a minimal one to get
it booting. Also include it in omap2plus dtbs and document bindings.
The hardware is under development.
Signed-off-by: Afzal Mohammed
---
Hi Benoit,
This is based on
22:36:38 -0400
Subject: [PATCH] ARM: dts: Add bandgap DT entry for OMAP5
Add bandgap device DT entry for OMAP5 dtsi.
Cc: Tony Lindgren
Cc: Russell King
Signed-off-by: Eduardo Valentin
Signed-off-by: J Keerthy
Signed-off-by: Benoit Cousson
---
arch/arm/boot/dts/omap5.dtsi |9 +
1
On 06/19/2013 02:46 AM, Tony Lindgren wrote:
* Roger Quadros [130619 00:42]:
Hi Benoit,
On 06/19/2013 04:17 AM, Benoit Cousson wrote:
Hi Roger,
On 06/18/2013 11:04 AM, Roger Quadros wrote:
Provide the RESET and Power regulators for the USB PHY,
the USB Host port mode and the PHY device
On 06/19/2013 02:46 AM, Tony Lindgren wrote:
* Roger Quadros rog...@ti.com [130619 00:42]:
Hi Benoit,
On 06/19/2013 04:17 AM, Benoit Cousson wrote:
Hi Roger,
On 06/18/2013 11:04 AM, Roger Quadros wrote:
Provide the RESET and Power regulators for the USB PHY,
the USB Host port mode
...@atomide.com
Cc: Russell King li...@arm.linux.org.uk
Signed-off-by: Eduardo Valentin eduardo.valen...@ti.com
Signed-off-by: J Keerthy j-keer...@ti.com
Signed-off-by: Benoit Cousson benoit.cous...@linaro.org
---
arch/arm/boot/dts/omap5.dtsi |9 +
1 file changed, 9 insertions(+)
diff --git
Hi Afzal,
On 06/14/2013 09:03 AM, Afzal Mohammed wrote:
Add AM43x ePOS EVM minimal DT source - this is a minimal one to get
it booting. Also include it in omap2plus dtbs and document bindings.
The hardware is under development.
Signed-off-by: Afzal Mohammed af...@ti.com
---
Hi Benoit,
This
On 06/19/2013 06:03 AM, Roger Quadros wrote:
On 06/19/2013 01:10 PM, Benoit Cousson wrote:
On 06/19/2013 02:46 AM, Tony Lindgren wrote:
* Roger Quadros rog...@ti.com [130619 00:42]:
Hi Benoit,
On 06/19/2013 04:17 AM, Benoit Cousson wrote:
Hi Roger,
On 06/18/2013 11:04 AM, Roger Quadros
On 06/19/2013 07:05 AM, Florian Vaussard wrote:
Hello,
On 06/19/2013 01:03 PM, Roger Quadros wrote:
On 06/19/2013 01:10 PM, Benoit Cousson wrote:
On 06/19/2013 02:46 AM, Tony Lindgren wrote:
* Roger Quadros rog...@ti.com [130619 00:42]:
Hi Benoit,
On 06/19/2013 04:17 AM, Benoit Cousson
Hi Tony,
On 06/19/2013 07:27 AM, Tony Lindgren wrote:
* Benoit Cousson b-cous...@ti.com [130619 03:17]:
On 06/19/2013 02:46 AM, Tony Lindgren wrote:
We have a similar issue with the MMC1 PBIAS. I think in the long run we
should expand regulator (and possibly pinctrl) framework(s) to handle
On 06/19/2013 09:05 AM, Roger Quadros wrote:
On 06/19/2013 03:23 PM, Benoit Cousson wrote:
On 06/19/2013 07:05 AM, Florian Vaussard wrote:
Hello,
On 06/19/2013 01:03 PM, Roger Quadros wrote:
On 06/19/2013 01:10 PM, Benoit Cousson wrote:
On 06/19/2013 02:46 AM, Tony Lindgren wrote:
* Roger
On 06/19/2013 09:05 AM, Roger Quadros wrote:
On 06/19/2013 03:23 PM, Benoit Cousson wrote:
On 06/19/2013 07:05 AM, Florian Vaussard wrote:
Hello,
On 06/19/2013 01:03 PM, Roger Quadros wrote:
On 06/19/2013 01:10 PM, Benoit Cousson wrote:
On 06/19/2013 02:46 AM, Tony Lindgren wrote:
* Roger
nodes in relation with ECAP & EHRPWM DT nodes to
AM33XX SoC family. Also populates device tree nodes for ECAP & EHRPWM by
adding necessary properties like pwm-cells, base reg & set disabled as
status.
Can someone please grab #2 till #4? Paul took just #1 as far as I can
tell.
DTS shou
Hi Roger,
On 06/18/2013 11:04 AM, Roger Quadros wrote:
Provide the RESET and Power regulators for the USB PHY,
the USB Host port mode and the PHY device.
Also provide pin multiplexer information for the USB host
pins.
Signed-off-by: Roger Quadros
---
Hi Eduardo,
On 06/18/2013 03:16 PM, Eduardo Valentin wrote:
Benoit
On 07-06-2013 16:46, Eduardo Valentin wrote:
Include bandgap devices for OMAP4460 devices.
Cc: "Benoît Cousson"
Cc: Tony Lindgren
Cc: Russell King
Cc: linux-o...@vger.kernel.org
Cc: devicetree-disc...@lists.ozlabs.org
Cc:
Hi Eduardo,
On 06/18/2013 03:16 PM, Eduardo Valentin wrote:
Benoit
On 07-06-2013 16:46, Eduardo Valentin wrote:
Include bandgap devices for OMAP4460 devices.
Cc: Benoît Cousson b-cous...@ti.com
Cc: Tony Lindgren t...@atomide.com
Cc: Russell King li...@arm.linux.org.uk
Cc:
Hi Roger,
On 06/18/2013 11:04 AM, Roger Quadros wrote:
Provide the RESET and Power regulators for the USB PHY,
the USB Host port mode and the PHY device.
Also provide pin multiplexer information for the USB host
pins.
Signed-off-by: Roger Quadros rog...@ti.com
---
should be Benoit Cousson
So, Benoit. Would you please be so kind and pick up the dts pieces?
That's done. Patches are available in
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git
for_3.11/dts
Thanks,
Benoit
--
To unsubscribe from this list: send the line unsubscribe
Hi Keerthy,
On 06/10/2013 06:03 AM, J, KEERTHY wrote:
> Hi Stephen,
>
> Thanks for the review comments.
>
>
> From: Stephen Warren [swar...@wwwdotorg.org]
> Sent: Saturday, June 08, 2013 1:26 AM
> To: J, KEERTHY
> Cc: Cousson, Benoit;
Hi Keerthy,
On 06/10/2013 06:03 AM, J, KEERTHY wrote:
Hi Stephen,
Thanks for the review comments.
From: Stephen Warren [swar...@wwwdotorg.org]
Sent: Saturday, June 08, 2013 1:26 AM
To: J, KEERTHY
Cc: Cousson, Benoit;
Hi Keerthy,
On 06/07/2013 01:28 PM, J Keerthy wrote:
> Adds palmas mfd and palmas regulator nodes. This is
> based on the patch series:
>
> http://www.mail-archive.com/linux-omap@vger.kernel.org/msg89957.html
>
> The device tree nodes are based on:
> https://lkml.org/lkml/2013/6/6/25
It looks
Hi Keerthy,
On 06/07/2013 01:28 PM, J Keerthy wrote:
Adds palmas mfd and palmas regulator nodes. This is
based on the patch series:
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg89957.html
The device tree nodes are based on:
https://lkml.org/lkml/2013/6/6/25
It looks like
Hi Dan,
On 05/31/2013 06:12 PM, Florian Vaussard wrote:
> Hello Dan,
>
> On 05/31/2013 05:45 PM, Dan Murphy wrote:
>> Update the dt property ti,audpwron-gpio to use the
>> gpio macro definition for GPIO_ACTIVE_HIGH.
>>
>> Signed-off-by: Dan Murphy
>> ---
>>
Hi Dan,
On 05/31/2013 05:44 PM, Dan Murphy wrote:
> The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es
> are different.
>
> A1-A3 = gpio_wk7
> ES = gpio_110
>
> There is no change to LED D2
>
> Abstract away the pinmux and the LED definitions for the two boards into
> the
On 06/03/2013 03:19 PM, Afzal Mohammed wrote:
> DT source (minimal) for AM4372 SoC to represent AM43x SoC's. Those
> represented here are the minimal DT nodes necessary to get kernel
> booting.
>
> In DT nodes, "ti,hwmod" property has not been added, this would be
> added along with PRCM support
Hi Afzal,
On 06/03/2013 09:49 AM, Mohammed, Afzal wrote:
> Hi Benoit,
>
> On Wed, May 29, 2013 at 19:05:35, Cousson, Benoit wrote:
>
>> And in this case, you do not introduce any new revision.
>>
>> There is no point to update the binding each time we add a new SoC
>> variant that will contain
Hi Afzal,
On 06/03/2013 09:49 AM, Mohammed, Afzal wrote:
Hi Benoit,
On Wed, May 29, 2013 at 19:05:35, Cousson, Benoit wrote:
And in this case, you do not introduce any new revision.
There is no point to update the binding each time we add a new SoC
variant that will contain the exact
On 06/03/2013 03:19 PM, Afzal Mohammed wrote:
DT source (minimal) for AM4372 SoC to represent AM43x SoC's. Those
represented here are the minimal DT nodes necessary to get kernel
booting.
In DT nodes, ti,hwmod property has not been added, this would be
added along with PRCM support for
Hi Dan,
On 05/31/2013 05:44 PM, Dan Murphy wrote:
The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es
are different.
A1-A3 = gpio_wk7
ES = gpio_110
There is no change to LED D2
Abstract away the pinmux and the LED definitions for the two boards into
the respective
Hi Dan,
On 05/31/2013 06:12 PM, Florian Vaussard wrote:
Hello Dan,
On 05/31/2013 05:45 PM, Dan Murphy wrote:
Update the dt property ti,audpwron-gpio to use the
gpio macro definition for GPIO_ACTIVE_HIGH.
Signed-off-by: Dan Murphy dmur...@ti.com
---
Hi Dan,
On 05/29/2013 01:20 PM, Dan Murphy wrote:
> The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es
> are different.
>
> A1-A3 = gpio_wk7clean
> ES = gpio_110
>
> There is no change to LED D2
>
> Abstract away the pinmux and the LED definitions for the two boards into
>
Hi Dan,
On 05/29/2013 01:20 PM, Dan Murphy wrote:
The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es
are different.
A1-A3 = gpio_wk7clean
ES = gpio_110
There is no change to LED D2
Abstract away the pinmux and the LED definitions for the two boards into
the
Hi Stephen,
On 05/29/2013 05:27 PM, Stephen Warren wrote:
> On 05/29/2013 02:39 AM, Benoit Cousson wrote:
>> Hi Afzal,
>>
>> On 05/29/2013 10:06 AM, Mohammed, Afzal wrote:
>>> Hi Jon,
>>>
>>> On Wed, May 29, 2013 at 03:35:10, Stephen Warren wrot
On 05/30/2013 09:31 AM, Gupta, Pekon wrote:
>> Sorry, I missed that series.
>>
>> I'm applying it right now.
>>
> No issues.. Please pick newer v4 versions of this series.
> Following are rebased, updated and tested on linux-3.10-rc3
>
> [PATCH v4,0/3]
Hi Pekon,
On 05/20/2013 06:44 AM, Gupta, Pekon wrote:
>
>
> am33xx_pinmux: pinmux@44e10800 {
> pinctrl-names = "default";
> - pinctrl-0 = <_keypad_s0 _keys_s0>;
> + pinctrl-0 = <_keypad_s0 _keys_s0
> + _pins_s0>;
Why
Hi Pekon,
On 05/20/2013 06:44 AM, Gupta, Pekon wrote:
am33xx_pinmux: pinmux@44e10800 {
pinctrl-names = default;
- pinctrl-0 = matrix_keypad_s0 volume_keys_s0;
+ pinctrl-0 = matrix_keypad_s0 volume_keys_s0
+ nandflash_pins_s0;
Why add this to
On 05/30/2013 09:31 AM, Gupta, Pekon wrote:
Sorry, I missed that series.
I'm applying it right now.
No issues.. Please pick newer v4 versions of this series.
Following are rebased, updated and tested on linux-3.10-rc3
[PATCH v4,0/3] http://www.spinics.net/lists/linux-omap/msg91165.html
Hi Stephen,
On 05/29/2013 05:27 PM, Stephen Warren wrote:
On 05/29/2013 02:39 AM, Benoit Cousson wrote:
Hi Afzal,
On 05/29/2013 10:06 AM, Mohammed, Afzal wrote:
Hi Jon,
On Wed, May 29, 2013 at 03:35:10, Stephen Warren wrote:
On 05/28/2013 03:25 PM, Jon Hunter wrote
On 05/29/2013 11:58 AM, Mohammed, Afzal wrote:
> Hi Benoit,
>
> On Wed, May 29, 2013 at 14:09:18, Cousson, Benoit wrote:
>> On 05/29/2013 10:06 AM, Mohammed, Afzal wrote:
>>> On Wed, May 29, 2013 at 03:35:10, Stephen Warren wrote:
On 05/28/2013 03:25 PM, Jon Hunter wrote:
>
> If you are
On 05/29/2013 10:57 AM, Florian Vaussard wrote:
> Hello,
>
> On 05/29/2013 10:53 AM, Benoit Cousson wrote:
>> + Florian
>>
>> Hi Afzal,
>>
>> On 05/27/2013 04:37 PM, Afzal Mohammed wrote:
>>> DT source (minimal) for AM4372 SoC to represent AM43x S
+ Florian
Hi Afzal,
On 05/27/2013 04:37 PM, Afzal Mohammed wrote:
> DT source (minimal) for AM4372 SoC to represent AM43x SoC's. Those
> represented here are the minimal DT nodes necessary to get kernel
> booting.
>
> In DT nodes, "ti,hwmod" property has not been added, this would be
> added
Hi Afzal,
On 05/29/2013 10:06 AM, Mohammed, Afzal wrote:
> Hi Jon,
>
> On Wed, May 29, 2013 at 03:35:10, Stephen Warren wrote:
>> On 05/28/2013 03:25 PM, Jon Hunter wrote:
>
ti,am335x-timer (applicable to AM335x devices)
ti,am335x-timer-1ms
Hi Afzal,
On 05/29/2013 10:06 AM, Mohammed, Afzal wrote:
Hi Jon,
On Wed, May 29, 2013 at 03:35:10, Stephen Warren wrote:
On 05/28/2013 03:25 PM, Jon Hunter wrote:
ti,am335x-timer (applicable to AM335x devices)
ti,am335x-timer-1ms (applicable to
+ Florian
Hi Afzal,
On 05/27/2013 04:37 PM, Afzal Mohammed wrote:
DT source (minimal) for AM4372 SoC to represent AM43x SoC's. Those
represented here are the minimal DT nodes necessary to get kernel
booting.
In DT nodes, ti,hwmod property has not been added, this would be
added along with
On 05/29/2013 10:57 AM, Florian Vaussard wrote:
Hello,
On 05/29/2013 10:53 AM, Benoit Cousson wrote:
+ Florian
Hi Afzal,
On 05/27/2013 04:37 PM, Afzal Mohammed wrote:
DT source (minimal) for AM4372 SoC to represent AM43x SoC's. Those
represented here are the minimal DT nodes necessary
On 05/29/2013 11:58 AM, Mohammed, Afzal wrote:
Hi Benoit,
On Wed, May 29, 2013 at 14:09:18, Cousson, Benoit wrote:
On 05/29/2013 10:06 AM, Mohammed, Afzal wrote:
On Wed, May 29, 2013 at 03:35:10, Stephen Warren wrote:
On 05/28/2013 03:25 PM, Jon Hunter wrote:
If you are adding more
Hi Eduardo,
On 05/15/2013 06:36 PM, Eduardo Valentin wrote:
> On 15-05-2013 11:23, Benoit Cousson wrote:
>> Hi Eduardo,
>>
>> On 05/15/2013 04:58 PM, Eduardo Valentin wrote:
>>> Include bandgap devices for OMAP4460 devices.
>>>
>>> Cc: "Benoît
Hi Eduardo,
On 05/15/2013 06:36 PM, Eduardo Valentin wrote:
On 15-05-2013 11:23, Benoit Cousson wrote:
Hi Eduardo,
On 05/15/2013 04:58 PM, Eduardo Valentin wrote:
Include bandgap devices for OMAP4460 devices.
Cc: Benoît Cousson b-cous...@ti.com
Cc: Tony Lindgren t...@atomide.com
Cc
Hi Eduardo,
On 05/15/2013 04:58 PM, Eduardo Valentin wrote:
> Include bandgap devices for OMAP4460 devices.
>
> Cc: "Benoît Cousson"
> Cc: Tony Lindgren
> Cc: Russell King
> Cc: linux-o...@vger.kernel.org
> Cc: devicetree-disc...@lists.ozlabs.org
> Cc: linux-arm-ker...@lists.infradead.org
>
Hi Eduardo,
On 05/15/2013 04:58 PM, Eduardo Valentin wrote:
Include bandgap devices for OMAP4460 devices.
Cc: Benoît Cousson b-cous...@ti.com
Cc: Tony Lindgren t...@atomide.com
Cc: Russell King li...@arm.linux.org.uk
Cc: linux-o...@vger.kernel.org
Cc: devicetree-disc...@lists.ozlabs.org
Hi Kishon,
On 04/09/2013 10:28 AM, Kishon Vijay Abraham I wrote:
> commit 92702d (ARM: OMAP4: PM: fix PM regression introduced by recent
> clock cleanup) makes the 'ocp2scp_usb_phy_phy_48m' as optional
> functional clock causing regression in MUSB. But this 48MHz clock is a
> mandatory clock for
Hi Kishon,
On 04/09/2013 10:28 AM, Kishon Vijay Abraham I wrote:
commit 92702d (ARM: OMAP4: PM: fix PM regression introduced by recent
clock cleanup) makes the 'ocp2scp_usb_phy_phy_48m' as optional
functional clock causing regression in MUSB. But this 48MHz clock is a
mandatory clock for usb
Hi Tony,
On 04/05/2013 05:43 PM, Tony Lindgren wrote:
> * Benoit Cousson [130405 03:00]:
>> On 04/05/2013 10:30 AM, Benoit Cousson wrote:
>>
>> ...
>>
>>>> ARM: dts: OMAP4: Add HS USB Host IP nodes
>>>> ARM: dts: OMAP3: Add HS USB Host I
Hi Tony,
On 04/05/2013 05:43 PM, Tony Lindgren wrote:
* Benoit Cousson b-cous...@ti.com [130405 03:00]:
On 04/05/2013 10:30 AM, Benoit Cousson wrote:
...
ARM: dts: OMAP4: Add HS USB Host IP nodes
ARM: dts: OMAP3: Add HS USB Host IP nodes
ARM: dts: omap3-beagle: Add USB Host support
Hi Roger,
On 04/05/2013 10:30 AM, Benoit Cousson wrote:
...
>> ARM: dts: OMAP4: Add HS USB Host IP nodes
>> ARM: dts: OMAP3: Add HS USB Host IP nodes
>> ARM: dts: omap3-beagle: Add USB Host support
>
> These 3 DTS patches are good to me, but I cannot applied them
Hi Roger,
On 03/20/2013 04:44 PM, Roger Quadros wrote:
> Hi Tony,
>
> These patches provide the SoC side code required to support
> the changes in the OMAP USB Host drivers done in [1], [2] & [3].
>
> Device tree support is added for Beagleboard only. I've removed
> Panda device tree support
Hi Roger,
On 03/20/2013 04:44 PM, Roger Quadros wrote:
Hi Tony,
These patches provide the SoC side code required to support
the changes in the OMAP USB Host drivers done in [1], [2] [3].
Device tree support is added for Beagleboard only. I've removed
Panda device tree support till we
Hi Roger,
On 04/05/2013 10:30 AM, Benoit Cousson wrote:
...
ARM: dts: OMAP4: Add HS USB Host IP nodes
ARM: dts: OMAP3: Add HS USB Host IP nodes
ARM: dts: omap3-beagle: Add USB Host support
These 3 DTS patches are good to me, but I cannot applied them on top of
the already existing
Hi Philip,
On 02/01/2013 06:37 AM, Philip Avinash wrote:
> DT field of "interrupts" was mentioned wrongly as "interrupt" in SPI
> node. This went unnoticed as spi-omap2 driver not making use of
> interrupt. Fixes the typo.
>
> Signed-off-by: Philip Avinash
> ---
> arch/arm/boot/dts/am33xx.dtsi
Hi Philip,
On 02/01/2013 06:37 AM, Philip Avinash wrote:
DT field of interrupts was mentioned wrongly as interrupt in SPI
node. This went unnoticed as spi-omap2 driver not making use of
interrupt. Fixes the typo.
Signed-off-by: Philip Avinash avinashphi...@ti.com
---
Hi Anil,
On 03/17/2013 06:23 AM, Anil Kumar wrote:
> Hi Benoit,
>
> On Thu, Mar 7, 2013 at 12:21 PM, Benoit Cousson wrote:
>> Hi,
>>
>> On 03/06/2013 06:53 PM, Tony Lindgren wrote:
>>> * Anil Kumar [130305 18:40]:
>>>> Hi Tony,
>>>
Hi Anil,
On 03/17/2013 06:23 AM, Anil Kumar wrote:
Hi Benoit,
On Thu, Mar 7, 2013 at 12:21 PM, Benoit Cousson b-cous...@ti.com wrote:
Hi,
On 03/06/2013 06:53 PM, Tony Lindgren wrote:
* Anil Kumar anilk...@gmail.com [130305 18:40]:
Hi Tony,
From: linux-arm-kernel [mailto:linux-arm
+ Jon
Hi Kishon,
On 03/07/2013 02:35 PM, Kishon Vijay Abraham I wrote:
> Hi Benoit,
>
> Here are the dt data patches to get usb device functional in OMAP platforms.
>
> All the patches deal with modifying arch/arm/boot except one which modifies
> Documentation/../usb/omap-usb.txt
>
> Changes
Hi Kishon,
On 03/13/2013 10:11 AM, kishon wrote:
> Benoit,
>
> Will you be queuing this patch series?
I'm reviewing them right now.
Regards,
Benoit
>
> Thanks
> Kishon
>
> On Thursday 07 March 2013 07:05 PM, Kishon Vijay Abraham I wrote:
>> Hi Benoit,
>>
>> Here are the dt data patches to
Hi Kishon,
On 03/13/2013 10:11 AM, kishon wrote:
Benoit,
Will you be queuing this patch series?
I'm reviewing them right now.
Regards,
Benoit
Thanks
Kishon
On Thursday 07 March 2013 07:05 PM, Kishon Vijay Abraham I wrote:
Hi Benoit,
Here are the dt data patches to get usb device
+ Jon
Hi Kishon,
On 03/07/2013 02:35 PM, Kishon Vijay Abraham I wrote:
Hi Benoit,
Here are the dt data patches to get usb device functional in OMAP platforms.
All the patches deal with modifying arch/arm/boot except one which modifies
Documentation/../usb/omap-usb.txt
Changes from v2:
101 - 200 of 352 matches
Mail list logo