Paul Mackerras schrieb:
Andrew Morton writes:
Bizarrely, the original author of the patch (Anton) has fallen off the cc.
Could whoever did that please thwap himself?
Anyway, my head is now officially spinning. Did anyone actually have a
reason why we shouldn't proceed with Anton's patch?
Paul Mackerras schrieb:
Andrew Morton writes:
Bizarrely, the original author of the patch (Anton) has fallen off the cc.
Could whoever did that please thwap himself?
Anyway, my head is now officially spinning. Did anyone actually have a
reason why we shouldn't proceed with Anton's patch?
Andrew Morton schrieb:
On Tue, 19 Feb 2008 12:27:54 +0100 Clemens Koller <[EMAIL PROTECTED]> wrote:
Benjamin Herrenschmidt schrieb:
On Tue, 2008-02-19 at 00:35 +0100, Clemens Koller wrote:
[EMAIL PROTECTED] schrieb:
On Mon, 18 Feb 2008 08:18:47 +0100, Krzysztof Helt said:
I know
CIJOML schrieb:
Hi there,
I would like flash my D-link DVG-G1402S with linux ADM5120 port. It should be
possible, but I would like still use it as a SIP gateway. There is Infineon
PEB 3332 EL responsible for that job, so my question is if it is supported.
BTW this router's internals photos
Benjamin Herrenschmidt schrieb:
On Tue, 2008-02-19 at 00:35 +0100, Clemens Koller wrote:
[EMAIL PROTECTED] schrieb:
On Mon, 18 Feb 2008 08:18:47 +0100, Krzysztof Helt said:
I know two fb drivers which use endianess information (pm2fb and s3c2410fb).
Both resolve endianess at driver level
Benjamin Herrenschmidt schrieb:
On Tue, 2008-02-19 at 00:35 +0100, Clemens Koller wrote:
[EMAIL PROTECTED] schrieb:
On Mon, 18 Feb 2008 08:18:47 +0100, Krzysztof Helt said:
I know two fb drivers which use endianess information (pm2fb and s3c2410fb).
Both resolve endianess at driver level
Andrew Morton schrieb:
On Tue, 19 Feb 2008 12:27:54 +0100 Clemens Koller [EMAIL PROTECTED] wrote:
Benjamin Herrenschmidt schrieb:
On Tue, 2008-02-19 at 00:35 +0100, Clemens Koller wrote:
[EMAIL PROTECTED] schrieb:
On Mon, 18 Feb 2008 08:18:47 +0100, Krzysztof Helt said:
I know two fb
CIJOML schrieb:
Hi there,
I would like flash my D-link DVG-G1402S with linux ADM5120 port. It should be
possible, but I would like still use it as a SIP gateway. There is Infineon
PEB 3332 EL responsible for that job, so my question is if it is supported.
BTW this router's internals photos
[EMAIL PROTECTED] schrieb:
On Mon, 18 Feb 2008 08:18:47 +0100, Krzysztof Helt said:
I know two fb drivers which use endianess information (pm2fb and s3c2410fb).
Both resolve endianess at driver level. Actually, both handle it by setting
special
bits so the graphics chip itself reorder bytes to
[EMAIL PROTECTED] schrieb:
On Mon, 18 Feb 2008 08:18:47 +0100, Krzysztof Helt said:
I know two fb drivers which use endianess information (pm2fb and s3c2410fb).
Both resolve endianess at driver level. Actually, both handle it by setting
special
bits so the graphics chip itself reorder bytes to
do so?
We (CRUX community, http://crux.nu ) just switched to the -ng.
The old non -ng version doesn't seem to be maintained well.
Regards,
--
Clemens Koller
___
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany
http://www.anagramm-technolo
?
We (CRUX community, http://crux.nu ) just switched to the -ng.
The old non -ng version doesn't seem to be maintained well.
Regards,
--
Clemens Koller
___
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany
http://www.anagramm-technology.com
*) addr)
#define CONST_ADDR (*(const struct __dummy *) addr)
CONST_ADDR is never used in the kernel.
Maybe some -cris people could have a look.
Thanks,
--
Clemens Koller
__
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel
*) addr)
#define CONST_ADDR (*(const struct __dummy *) addr)
CONST_ADDR is never used in the kernel.
Maybe some -cris people could have a look.
Thanks,
--
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel
.
Work your way from there and then use a Linux Source code
Cross Reference (lxr, ask Google for one) and follow the code.
Regards,
--
Clemens Koller
__
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
F
a Linux Source code
Cross Reference (lxr, ask Google for one) and follow the code.
Regards,
--
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm
in menuconfig is it present to
turn OFF. Even if I hand edit .config, make puts it back again...
True...
Regards,
--
Clemens Koller
___
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany
http://www.anagramm-technology.com
Phone: +49-89-741518-50
Fax
in menuconfig is it present to
turn OFF. Even if I hand edit .config, make puts it back again...
True...
Regards,
--
Clemens Koller
___
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany
http://www.anagramm-technology.com
Phone: +49-89-741518-50
on embedded machines.
The attached patch is another try to at least allow to get
rid of this module.
Feedback is welcome.
Regards,
--
Clemens Koller
__
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089
on embedded machines.
The attached patch is another try to at least allow to get
rid of this module.
Feedback is welcome.
Regards,
--
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089
Randy Dunlap schrieb:
> On Mon, 03 Dec 2007 14:33:29 +0100 Clemens Koller wrote:
>
>> Just a little whitespace cleanup patch for Documentation/BUG-HUNTING.
>>
>> Signed-off-by: Clemens Koller <[EMAIL PROTECTED]>
>
>
> Mostly looks OK, except for the last
Just a little whitespace cleanup patch for Documentation/BUG-HUNTING.
Signed-off-by: Clemens Koller <[EMAIL PROTECTED]>
--
Clemens Koller
__
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
F
Just a little whitespace cleanup patch for Documentation/BUG-HUNTING.
Signed-off-by: Clemens Koller [EMAIL PROTECTED]
--
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089
Randy Dunlap schrieb:
On Mon, 03 Dec 2007 14:33:29 +0100 Clemens Koller wrote:
Just a little whitespace cleanup patch for Documentation/BUG-HUNTING.
Signed-off-by: Clemens Koller [EMAIL PROTECTED]
Mostly looks OK, except for the last chunk: why delete that line?
missing a + line
is at .c2u_0cpynopld+0x8/0x24
LR is at mpeg_read+0x19c/0x35c [dm642]
pc : []lr : []Tainted: P
Your Kernel is tainted. The proprietary module seems to crash.
You won't get help from us regarding this module.
Please read:
http://www.kernel.org/pub/linux/docs/lkml/reporting-bugs.html
Regards,
--
Clemens
Regards,
--
Clemens Koller
___
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany
http://www.anagramm-technology.com
Phone: +49-89-741518-50
Fax: +49-89-741518-19
-
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body
why the
watchdog is triggered so easily and why it's good this way.
i.e: http://www.ganssle.com/watchdogs.pdf
Regards,
--
Clemens Koller
__
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518
://www.ganssle.com/watchdogs.pdf
Regards,
--
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm-technology.com
-
To unsubscribe from this list: send the line
tchdog in the kernel.
See: Device Drivers -> Character devices -> Watchdog Timer Support -> ...
Regards,
--
Clemens Koller
__
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http
in the kernel.
See: Device Drivers - Character devices - Watchdog Timer Support - ...
Regards,
--
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm
der which just gives full
control to the linux kernel.
Florian:
Check the IP route chache flushes, as Eric mentioned.
I'm working on the MPC854x as well. If you send me your scripts,
I can give them a run here to gather more information.
(I'm about to update my kernels here)
Regards,
Clemens Koller
___
.
Florian:
Check the IP route chache flushes, as Eric mentioned.
I'm working on the MPC854x as well. If you send me your scripts,
I can give them a run here to gather more information.
(I'm about to update my kernels here)
Regards,
Clemens Koller
__
RD Imaging Devices
ld be less of a chore to use it in linux...is there something
>> wrong with the truecrypt kernel driver ?
>
> Two reasons:
> The author hasn't sent patches.
> It looks to me the license is incompatible with the GPLv2.
Just FYI:
http://www.truecrypt.org/license.php
Regards,
Clemens K
...is there something
wrong with the truecrypt kernel driver ?
Two reasons:
The author hasn't sent patches.
It looks to me the license is incompatible with the GPLv2.
Just FYI:
http://www.truecrypt.org/license.php
Regards,
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
active sync /dev/hde1
1 3411 active sync /dev/hdg1
I didn't dare to report a bug against the old kernel. I moved to
2.6.22.9 and the problem disappeared...
Any ways to debug that (non-intrusive on a production machine)?
Regards,
Clemens Koller
___
a bug against the old kernel. I moved to
2.6.22.9 and the problem disappeared...
Any ways to debug that (non-intrusive on a production machine)?
Regards,
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
related, you can boot
some other distro or change the kernel to see if this problem
still persists. Please post the dmesg output if you are sure
the problem is kernel related...
Regards,
--
Clemens Koller
___
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379
related, you can boot
some other distro or change the kernel to see if this problem
still persists. Please post the dmesg output if you are sure
the problem is kernel related...
Regards,
--
Clemens Koller
___
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379
,
--
Clemens Koller
___
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany
http://www.anagramm-technology.com
Phone: +49-89-741518-50
Fax: +49-89-741518-19
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" i
,
--
Clemens Koller
___
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany
http://www.anagramm-technology.com
Phone: +49-89-741518-50
Fax: +49-89-741518-19
-
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body
so temperature sensitive (so, a
typical hardware design flaw :-).
On a PCI add-on card with the same chip, the E-PAD also didn't look
soldered over it's whole E-PAD area but it was working.
As you might have noticed, I am more into hardware debugging.
Propably some kernel gurus might have other
ing vanilla kernel for your
problem (minimal configuration, skip i.e. the sound stuff, ...).
And then git bisect with a known bad kernel.
Same thing in hardware: move components (Controllers + HDD) to/from a working
machine and verify...
Regards,
Clemens Koller
__
for your
problem (minimal configuration, skip i.e. the sound stuff, ...).
And then git bisect with a known bad kernel.
Same thing in hardware: move components (Controllers + HDD) to/from a working
machine and verify...
Regards,
Clemens Koller
__
RD Imaging Devices
add-on card with the same chip, the E-PAD also didn't look
soldered over it's whole E-PAD area but it was working.
As you might have noticed, I am more into hardware debugging.
Propably some kernel gurus might have other ideas (related to software).
Regards,
Clemens Koller
RaidDevice State
0 3310 active sync /dev/hde1
1 341 1 active sync /dev/hdg1
Thank you in advance,
--
Clemens Koller
__
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D
ntly dropped error rate (from about 20 to
> 2-4 per mirror rebuild) but did not eliminate the problem.
Again... sounds like bad memory to me.
Juat my $0.05.
Regards,
Clemens Koller
__
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-
) but did not eliminate the problem.
Again... sounds like bad memory to me.
Juat my $0.05.
Regards,
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm
active sync /dev/hde1
1 3411 active sync /dev/hdg1
Thank you in advance,
--
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
.
Regards,
Clemens Koller
__
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm-technology.com
-
To unsubscribe from this list: send the line "unsubscribe linux-k
.
Regards,
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm-technology.com
-
To unsubscribe from this list: send the line unsubscribe linux-kernel
Dag-Erling Smørgrav schrieb:
> Clemens Koller <[EMAIL PROTECTED]> writes:
>> I am talking about _how_ the calibration register is addressed from
>> userspace. It's a simple register, some bits at address 7 and I would
>> expect to read/modify/write registers to do all t
Dag-Erling Smørgrav schrieb:
> Clemens Koller <[EMAIL PROTECTED]> writes:
>> It looks odd to me to do only differential up and down adjustments.
>> I would prefer read_calibration_register and write_calibration_register
>> access and let the userspace decide how mu
battery
with +1567days,7h,34m,12sec instead of telling it's 11th Sept. 2007, 4:33pm ?
Regards,
Clemens Koller
__
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm-t
of telling it's 11th Sept. 2007, 4:33pm ?
Regards,
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm-technology.com
-
To unsubscribe from this list
Dag-Erling Smørgrav schrieb:
Clemens Koller [EMAIL PROTECTED] writes:
It looks odd to me to do only differential up and down adjustments.
I would prefer read_calibration_register and write_calibration_register
access and let the userspace decide how much it wants to
increment/decrement
Dag-Erling Smørgrav schrieb:
Clemens Koller [EMAIL PROTECTED] writes:
I am talking about _how_ the calibration register is addressed from
userspace. It's a simple register, some bits at address 7 and I would
expect to read/modify/write registers to do all the things you want
to do. Register
mount YAFFS2 filesystem as rootfs
Looks great!
Will this driver also work for the new BF52x series of the Blackfin Series?
(Or is it planned to make it work for... anytime soon.)
Thank you!
--
Clemens Koller
__
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45
mount YAFFS2 filesystem as rootfs
Looks great!
Will this driver also work for the new BF52x series of the Blackfin Series?
(Or is it planned to make it work for... anytime soon.)
Thank you!
--
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45
Robert P. J. Day schrieb:
On Thu, 23 Aug 2007, Clemens Koller wrote:
shaneed cm schrieb:
Hi,
This is a request for Linux kernel related project ideas.
I am Computer Science Engineering final year student. We have to do
a project of one year duration . I formed a group of two and we
decided
suitable for Solid State PATA/SATA Flashdisks and write / modify
a kernel scheduler to support it.
Regards,
--
Clemens Koller
__
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http
suitable for Solid State PATA/SATA Flashdisks and write / modify
a kernel scheduler to support it.
Regards,
--
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http
Robert P. J. Day schrieb:
On Thu, 23 Aug 2007, Clemens Koller wrote:
shaneed cm schrieb:
Hi,
This is a request for Linux kernel related project ideas.
I am Computer Science Engineering final year student. We have to do
a project of one year duration . I formed a group of two and we
decided
ean up will break it again.
/* Module mapping starts here */
.fill (PTRS_PER_PMD - (KERNEL_TEXT_SIZE/PMD_SIZE)),8,0
Regards,
--
Clemens Koller
___
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany
http://www.anagramm-technolo
will break it again.
/* Module mapping starts here */
.fill (PTRS_PER_PMD - (KERNEL_TEXT_SIZE/PMD_SIZE)),8,0
Regards,
--
Clemens Koller
___
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany
http://www.anagramm-technology.com
the k8temp is propably more difficult as installing
a newer kernel. Have a look at:
http://lists.debian.org/debian-amd64/2007/03/msg5.html
Regards,
--
Clemens Koller
__
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741
more difficult as installing
a newer kernel. Have a look at:
http://lists.debian.org/debian-amd64/2007/03/msg5.html
Regards,
--
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax
bout 7-10 days after a reboot.
Maybe there is some kind of buffer running full?
Do you need any additional info?
Please CC me :-)
(cc netdev)
Regards,
--
Clemens Koller
__
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
kind of buffer running full?
Do you need any additional info?
Please CC me :-)
(cc netdev)
Regards,
--
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http
Robert P. J. Day schrieb:
a while back, i threw together this wiki page:
http://fsdev.net/wiki/index.php?title=Stuff_to_be_removed
feel free to comment.
Won't miss anything there.
However, removal of kernel_threads() needs some updated drivers...
Regards,
--
Clemens Koller
Sam Ravnborg schrieb:
From: Segher Boessenkool <[EMAIL PROTECTED]>
...since this won't work (compiler bug, see <http://gcc.gnu.org/PR31490>).
The bug report says IA64 is broken, too. Please verify and extend the
patch if possible...
gcc-4.2.1 will be released soon.
Regards
Sam Ravnborg schrieb:
From: Segher Boessenkool [EMAIL PROTECTED]
...since this won't work (compiler bug, see http://gcc.gnu.org/PR31490).
The bug report says IA64 is broken, too. Please verify and extend the
patch if possible...
gcc-4.2.1 will be released soon.
Regards,
--
Clemens Koller
Robert P. J. Day schrieb:
a while back, i threw together this wiki page:
http://fsdev.net/wiki/index.php?title=Stuff_to_be_removed
feel free to comment.
Won't miss anything there.
However, removal of kernel_threads() needs some updated drivers...
Regards,
--
Clemens Koller
nybody give an example how to "map" lots of pages (which
got filled by i.e. a scatter gather DMA chain) from a driver
(kernel space) to userspace?
Thanks
--
Clemens Koller
__
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-8
give an example how to map lots of pages (which
got filled by i.e. a scatter gather DMA chain) from a driver
(kernel space) to userspace?
Thanks
--
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089
Chuck Ebbert schrieb:
On 07/06/2007 03:57 AM, Clemens Koller wrote:
The 180seconds reboot timeout also doesn't make sense here. The problem
won't go away after a reboot without user interaction.
What about GRUB fallbacks? The fallback image/kernel will start
automatically on reboot if you use
Chuck Ebbert schrieb:
On 07/06/2007 03:57 AM, Clemens Koller wrote:
The 180seconds reboot timeout also doesn't make sense here. The problem
won't go away after a reboot without user interaction.
What about GRUB fallbacks? The fallback image/kernel will start
automatically on reboot if you use
= parameters
and just retry/continue the boot process?
The 180seconds reboot timeout also doesn't make sense here. The problem
won't go away after a reboot without user interaction.
Regards,
--
Clemens Koller
___
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
= parameters
and just retry/continue the boot process?
The 180seconds reboot timeout also doesn't make sense here. The problem
won't go away after a reboot without user interaction.
Regards,
--
Clemens Koller
___
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
to be
a leap second added this year...but they would have seen it the next
time a leap second was added.
True. It seems like we will have another one next year.
Regards,
--
Clemens Koller
__
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof
you please explain in which configuration this problem got triggered.
Does it make sense to have some testing environments which have the date
set to about one month in the future to catch any crashes like that,
preventing machines in production from failing?!
Best regards,
--
Clemens Koller
you please explain in which configuration this problem got triggered.
Does it make sense to have some testing environments which have the date
set to about one month in the future to catch any crashes like that,
preventing machines in production from failing?!
Best regards,
--
Clemens Koller
to be
a leap second added this year...but they would have seen it the next
time a leap second was added.
True. It seems like we will have another one next year.
Regards,
--
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof
.. and see if it was really the kernel
who crashed.... and check your cron configuration.
Regards,
--
Clemens Koller
__
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagra
configuration.
Regards,
--
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm-technology.com
-
To unsubscribe from this list: send the line unsubscribe
Hello, Dimitry!
Dmitry Torokhov schrieb:
Hi,
On 6/27/07, Clemens Koller <[EMAIL PROTECTED]> wrote:
drivers/usb/input/usbtouchscreen.c: usbtouch_probe - type->init()
failed, err: -19
dmc_tsc10_init() returns -ENODEV (-19) when device responds with
something other than 0x06 0x00 to t
Hello, Dimitry!
Dmitry Torokhov schrieb:
Hi,
On 6/27/07, Clemens Koller [EMAIL PROTECTED] wrote:
drivers/usb/input/usbtouchscreen.c: usbtouch_probe - type-init()
failed, err: -19
dmc_tsc10_init() returns -ENODEV (-19) when device responds with
something other than 0x06 0x00 to the reset
Hello, Dimitry!
Dmitry Torokhov schrieb:
On 6/27/07, Clemens Koller <[EMAIL PROTECTED]> wrote:
drivers/usb/input/usbtouchscreen.c: usbtouch_probe - type->init()
failed, err: -19
dmc_tsc10_init() returns -ENODEV (-19) when device responds with
something other than 0x06 0x00 to t
Host Controller
DateCode April-2006.
The same problem appears with 2.6.21.5 and 2.6.20.1-ubuntu-something
on x86 platform.
--
Clemens Koller
__
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 08
Oliver Neukum schrieb:
Am Mittwoch, 27. Juni 2007 schrieb Clemens Koller:
Whenever I plug/unplug the FTDI FT232BM USB-RS232 converter, the latest
2.6.21.5 kernel complains:
usb 2-1: USB disconnect, address 7
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
Hi, Oliver!
Oliver Neukum schrieb:
Am Mittwoch, 27. Juni 2007 schrieb Clemens Koller:
Whenever I plug/unplug the FTDI FT232BM USB-RS232 converter, the latest
2.6.21.5 kernel complains:
usb 2-1: USB disconnect, address 7
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from
if you need more debugging information.
Regards,
--
Clemens Koller
__
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm-technology.com
-
To unsubscribe from this list
if you need more debugging information.
Regards,
--
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm-technology.com
-
To unsubscribe from this list
Hi, Oliver!
Oliver Neukum schrieb:
Am Mittwoch, 27. Juni 2007 schrieb Clemens Koller:
Whenever I plug/unplug the FTDI FT232BM USB-RS232 converter, the latest
2.6.21.5 kernel complains:
usb 2-1: USB disconnect, address 7
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from
Oliver Neukum schrieb:
Am Mittwoch, 27. Juni 2007 schrieb Clemens Koller:
Whenever I plug/unplug the FTDI FT232BM USB-RS232 converter, the latest
2.6.21.5 kernel complains:
usb 2-1: USB disconnect, address 7
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
DateCode April-2006.
The same problem appears with 2.6.21.5 and 2.6.20.1-ubuntu-something
on x86 platform.
--
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http
Hello, Dimitry!
Dmitry Torokhov schrieb:
On 6/27/07, Clemens Koller [EMAIL PROTECTED] wrote:
drivers/usb/input/usbtouchscreen.c: usbtouch_probe - type-init()
failed, err: -19
dmc_tsc10_init() returns -ENODEV (-19) when device responds with
something other than 0x06 0x00 to the reset and set
;"
SYSFS{bMaxPower}==" 0mA"
SYSFS{bmAttributes}=="e0"
SYSFS{bConfigurationValue}=="1"
SYSFS{bNumInterfaces}==" 1"
SYSFS{configuration}==""
looking at parent device '/devices/pci:00/:00:14.1':
ID=
{subsystem_vendor}==0x1131
SYSFS{device}==0x1561
SYSFS{vendor}==0x1131
looking at parent device '/devices/pci:00':
ID==pci:00
BUS==
DRIVER==
--
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof
,
--
Clemens Koller
__
R Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm-technology.com
-
To unsubscribe from this list: send the line "unsubscribe linux-k
,
--
Clemens Koller
__
RD Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm-technology.com
-
To unsubscribe from this list: send the line unsubscribe linux-kernel
1 - 100 of 140 matches
Mail list logo