Now that bcm47xx_sprom.h contains a prototype for bcm47xx_fill_sprom,
include that header file directly from bcm47xx.h.
Signed-off-by: Florian Fainelli
---
arch/mips/include/asm/mach-bcm47xx/bcm47xx.h | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/mips/include/asm
Hi Thomas,
This patch series fixes W=1 -Wmissing-prototypes warnings for the
bcm47xx_sprom.c firmware file.
Thanks!
Florian Fainelli (2):
firmware: bcm47xx_sprom: Fix -Wmissing-prototypes warnings
MIPS: BCM47xx: Include bcm47xx_sprom.h
arch/mips/include/asm/mach-bcm47xx/bcm47xx.h | 4
bcm47xx_sprom.h did not include a prototype for bcm47xx_fill_sprom()
therefore add one, and make sure we do include that header to fix
-Wmissing-prototypes warnings.
Reported-by: kernel test robot
Signed-off-by: Florian Fainelli
---
drivers/firmware/broadcom/bcm47xx_sprom.c | 1 +
include
On 7/23/20 11:20 PM, Rakesh Pillai wrote:
>
>
>> -Original Message-----
>> From: Florian Fainelli
>> Sent: Friday, July 24, 2020 12:33 AM
>> To: Rakesh Pillai ; 'Andrew Lunn'
>>
>> Cc: ath...@lists.infradead.org; linux-wirel...@vger.kernel
On 6/13/20 1:21 AM, Álvaro Fernández Rojas wrote:
> BCM6318, BCM6328, BCM6362 and BCM63268 SoCs have a power domain controller
> to enable/disable certain components in order to save power.
>
> v4: Fix device tree bindings documentation.
> v3: Introduce changes suggested by Florian:
> - Use
time configuration.
Signed-off-by: Florian Fainelli
---
drivers/soc/bcm/brcmstb/biuctrl.c | 87 +++
1 file changed, 77 insertions(+), 10 deletions(-)
diff --git a/drivers/soc/bcm/brcmstb/biuctrl.c
b/drivers/soc/bcm/brcmstb/biuctrl.c
index 61731e01f94b..95602ece51d4
On 7/24/20 1:33 PM, Jim Quinlan wrote:
> From: Jim Quinlan
>
> A reset controller "rescal" is shared between the AHCI driver and the PCIe
> driver for the BrcmSTB 7216 chip. Use
> devm_reset_control_get_optional_shared() to handle this sharing.
>
> Signed-off-by: Jim Quinlan
>
> Fixes:
cpu_logical_map is only defined for CONFIG_SMP builds, when we are in an
UP configuration, the boot CPU is 0.
Reported-by: kernel test robot
Fixes: 6468fc18b006 ("irqchip/irq-bcm7038-l1: Add PM support")
Signed-off-by: Florian Fainelli
---
drivers/irqchip/irq-bcm7038-l1.c | 8 ++
drivers/memory/Kconfig
> +++ b/drivers/memory/Kconfig
> @@ -54,6 +54,17 @@ config ATMEL_EBI
> tree is used. This bus supports NANDs, external ethernet controller,
> SRAMs, ATA devices, etc.
>
> +config BRCMSTB_DPFE
> + bool "Broadcom STB DPFE driver"
On 7/24/20 11:23 AM, Krzysztof Kozlowski wrote:
> Fix firwmare -> firmware.
>
> Signed-off-by: Krzysztof Kozlowski
Acked-by: Florian Fainelli
--
Florian
On 7/24/20 3:50 AM, Codrin Ciubotariu wrote:
> The MACB embeds an MDIO bus controller. For this reason, the PHY nodes
> were represented as sub-nodes in the MACB node. Generally, the
> Ethernet controller is different than the MDIO controller, so the PHYs
> are probed by a separate MDIO driver.
On 7/23/2020 9:07 PM, kernel test robot wrote:
> Hi Justin,
>
> FYI, the error/warning still remains.
>
> tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> master
> head: d15be546031cf65a0fc34879beca02fd90fe7ac7
> commit: 6468fc18b00685c82408f40e9569c0d3527862b8
On 7/23/20 3:08 PM, codrin.ciubota...@microchip.com wrote:
> On 23.07.2020 21:59, Florian Fainelli wrote:
>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
>> content is safe
>>
>> On 7/21/20 10:13 AM, Codrin Ciubotariu wrote:
>>> Th
On 7/23/20 11:21 AM, Rakesh Pillai wrote:
>
>
>> -Original Message-----
>> From: Florian Fainelli
>> Sent: Tuesday, July 21, 2020 11:35 PM
>> To: Andrew Lunn ; Rakesh Pillai
>> Cc: ath...@lists.infradead.org; linux-wirel...@vger.kernel.org;
On 7/21/20 10:13 AM, Codrin Ciubotariu wrote:
> Use the new macb bindings and add an mdio sub-node to contain all the
> phy nodes.
>
> Signed-off-by: Codrin Ciubotariu
Reviewed-by: Florian Fainelli
--
Florian
On 7/21/20 10:13 AM, Codrin Ciubotariu wrote:
> Use the new macb bindings and add an mdio sub-node to contain all the
> phy nodes.
>
> Signed-off-by: Codrin Ciubotariu
Reviewed-by: Florian Fainelli
--
Florian
On 7/21/20 10:13 AM, Codrin Ciubotariu wrote:
> Use the new macb bindings and add an mdio sub-node to contain all the
> phy nodes.
>
> Signed-off-by: Codrin Ciubotariu
Reviewed-by: Florian Fainelli
--
Florian
On 7/21/20 10:13 AM, Codrin Ciubotariu wrote:
> The MACB embeds an MDIO bus controller. For this reason, the PHY nodes
> were represented as sub-nodes in the MACB node. Generally, the
> Ethernet controller is different than the MDIO controller, so the PHYs
> are probed by a separate MDIO driver.
On 7/21/20 10:13 AM, Codrin Ciubotariu wrote:
> Use the new macb bindings and add an mdio sub-node to contain all the
> phy nodes.
>
> Signed-off-by: Codrin Ciubotariu
Reviewed-by: Florian Fainelli
--
Florian
d to contain of the PHY nodes (and other MDIO devices' nodes).
>
> Signed-off-by: Codrin Ciubotariu
Reviewed-by: Florian Fainelli
--
Florian
On 7/21/20 10:13 AM, Codrin Ciubotariu wrote:
> Use the device-managed variant for the allocating the MDIO bus. This
> cleans-up the code a little on the remove and error paths.
>
> Signed-off-by: Codrin Ciubotariu
Reviewed-by: Florian Fainelli
--
Florian
On 7/23/20 12:37 AM, Krzysztof Kozlowski wrote:
> The specific drivers in drivers/memory usually go via architecture (e.g.
> ARM SoC) maintainers but the generic parts (of_memory.[ch]) lacked any
> care.
>
> Signed-off-by: Krzysztof Kozlowski
Acked-by: Florian Fainelli
What
On 7/23/20 12:37 AM, Krzysztof Kozlowski wrote:
> Single statement blocks don't need braces. Fixes checkpatch warning:
>
> WARNING: braces {} are not necessary for single statement blocks
>
> Signed-off-by: Krzysztof Kozlowski
Acked-by: Florian Fainelli
--
Florian
On 7/23/20 12:37 AM, Krzysztof Kozlowski wrote:
> The string itself can be made const for safety.
>
> Signed-off-by: Krzysztof Kozlowski
Acked-by: Florian Fainelli
--
Florian
On 7/22/20 12:38 PM, Jonathan McDowell wrote:
> On Tue, Jul 21, 2020 at 10:26:07AM -0700, Florian Fainelli wrote:
>> On 7/21/20 10:16 AM, Jonathan McDowell wrote:
>>> This adds full 802.1q VLAN support to the qca8k, allowing the use of
>>> vlan_filtering and more compl
On 7/21/20 12:21 PM, Jakub Kicinski wrote:
> On Tue, 21 Jul 2020 04:58:59 + Chi Song wrote:
>> An imbalanced TX indirection table causes netvsc to have low
>> performance. This table is created and managed during runtime. To help
>> better diagnose performance issues caused by imbalanced
On 7/21/20 10:25 AM, Andrew Lunn wrote:
> On Tue, Jul 21, 2020 at 10:44:19PM +0530, Rakesh Pillai wrote:
>> NAPI gets scheduled on the CPU core which got the
>> interrupt. The linux scheduler cannot move it to a
>> different core, even if the CPU on which NAPI is running
>> is heavily loaded. This
On 7/21/20 4:02 AM, hongbo.w...@nxp.com wrote:
> From: "hongbo.wang"
>
> the following command will be supported:
> Add VLAN:
> ip link add link swp1 name swp1.100 type vlan protocol 802.1ad id 100
> Delete VLAN:
> ip link del link swp1 name swp1.100
>
> when adding vlan, this patch
suspend callbacks have completed.
>
> Adding a suspend hook to the BDC driver that halts the controller before
> S2 entry thus preventing unwanted access to the BDC register space during
> this transition.
>
> Signed-off-by: Danesh Petigara
> Signed-off-by: Al Cooper
Acked-by: Florian Fainelli
--
Florian
On 7/21/20 7:43 AM, Al Cooper wrote:
> Add compatible string for some newer boards that only have this
> as there match sting. Remove unused compatible string "brcm,bdc-v0.16".
>
> Signed-off-by: Al Cooper
Acked-by: Florian Fainelli
--
Florian
faster than the incoming
> 16K transfers. This issue is fixed by doubling the number of BDs
> that can be queued so that the entire 1M request can be queued
> without running out of buffers.
>
> Signed-off-by: Al Cooper
Acked-by: Florian Fainelli
--
Florian
; cleared. The fix is to clear the endpoint flags for the disconnect
> case only and not for S2 exit.
>
> Signed-off-by: Al Cooper
Acked-by: Florian Fainelli
--
Florian
On 7/21/20 7:43 AM, Al Cooper wrote:
> Remove "brcm,bdc-v0.16" because it was never used on any system.
> Add "brcm,bdc-udc-v2" which exists for any STB system with BDC.
>
> Signed-off-by: Al Cooper
Acked-by: Florian Fainelli
--
Florian
The fix is to only allow the endpoint commands
> when the endpoint is connected. This will also fix issues that
> showed up when using configfs to create gadgets.
>
> Signed-off-by: Sasi Kumar
> Signed-off-by: Al Cooper
Acked-by: Florian Fainelli
--
Florian
On 7/21/20 10:16 AM, Jonathan McDowell wrote:
> This adds full 802.1q VLAN support to the qca8k, allowing the use of
> vlan_filtering and more complicated bridging setups than allowed by
> basic port VLAN support.
>
> Tested with a number of untagged ports with separate VLANs and then a
> trunk
On 7/20/2020 3:41 AM, hongbo.w...@nxp.com wrote:
> From: "hongbo.wang"
>
> the following command can be supported:
> ip link add link swp1 name swp1.100 type vlan protocol 802.1ad id 100
You should probably include the switch driver that is going to be
benefiting from doing these changes in
On 7/15/20 7:35 AM, Jim Quinlan wrote:
> Patchset Summary:
> Enhance a PCIe host controller driver. Because of its unusual design
> we are foced to change dev->dma_pfn_offset into a more general role
> allowing multiple offsets. See the 'v1' notes below for more info.
Christoph, Robin,
On 7/9/20 4:27 PM, Florian Fainelli wrote:
> Do not print the full function name (brcmstb_gisb_arb_decode_addr) which
> is quite long, and reduces our chances to printing a full line, instead
> just use "GISB: " as a prefix for these prints.
>
> Signed-off-by: F
On 7/9/20 4:24 PM, Florian Fainelli wrote:
> Signed-off-by: Florian Fainelli
Applied to soc/next, thanks!
--
Florian
On 7/9/20 4:45 PM, Florian Fainelli wrote:
> ARCH_BRCMSTB makes use of the irq-bcm7038-l1.c irqchip driver, enable
> it.
>
> Signed-off-by: Florian Fainelli
Applied to soc/next, thanks!
--
Florian
-by: Florian Fainelli
---
arch/arm64/kernel/entry.S | 2 ++
arch/arm64/kvm/hyp/entry.S | 2 ++
arch/arm64/kvm/hyp/hyp-entry.S | 4
3 files changed, 8 insertions(+)
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index c1ffa95c0ad2..f70e0893ba51 100644
--- a/arch/arm64
at the point of an ERET, this could potentially be used as part of a
side-channel attack.
This patch emits an SB sequence after each ERET so that speculation is
held up on exception return.
Signed-off-by: Will Deacon
Signed-off-by: Florian Fainelli
---
arch/arm64/kernel/entry.S | 2 ++
arch
On 7/20/20 6:04 AM, Greg KH wrote:
> On Thu, Jul 09, 2020 at 12:50:23PM -0700, Florian Fainelli wrote:
>> From: Will Deacon
>>
>> commit 679db70801da9fda91d26caf13bf5b5ccc74e8e8 upstream
>>
>> Some CPUs can speculate past an ERET instruction and potentiall
sync_sg_for_device(e1, e2, e3, e4)
> +dma_sync_sg_for_device(>dev, e2, e3, e4)
>
> @@
> expression e1, e2;
> @@
> -pci_dma_mapping_error(e1, e2)
> +dma_mapping_error(>dev, e2)
>
> @@
> expression e1, e2;
> @@
> -pci_set_dma_mask(e1, e2)
> +dma_set_mask(>dev, e2)
>
> @@
> expression e1, e2;
> @@
> -pci_set_consistent_dma_mask(e1, e2)
> +dma_set_coherent_mask(>dev, e2)
>
> Signed-off-by: Christophe JAILLET
Acked-by: Florian Fainelli
--
Florian
quot;net: bcmgenet: Use devm_clk_get_optional() to get the
> clocks")
> Signed-off-by: Zhang Changzhong
Acked-by: Florian Fainelli
--
Florian
t;net: bcmgenet: enable NETIF_F_HIGHDMA flag")
> Signed-off-by: Zhang Changzhong
Acked-by: Florian fainelli
--
Florian
using macros (Andrew)
Florian Fainelli (4):
net: Wrap ndo_do_ioctl() to prepare for DSA stacked ops
net: dsa: Add wrappers for overloaded ndo_ops
net: Call into DSA netdevice_ops wrappers
net: dsa: Setup dsa_netdev_ops
include/net/dsa.h| 71
Make the core net_device code call into our ndo_do_ioctl() and
ndo_get_phys_port_name() functions via the wrappers defined previously
Signed-off-by: Florian Fainelli
---
net/core/dev.c | 5 +
net/core/dev_ioctl.c | 5 +
2 files changed, 10 insertions(+)
diff --git a/net/core
do tests like dev->netdev_ops == _ops which
was not the case before since we were allocating an entirely new
structure.
Signed-off-by: Florian Fainelli
---
include/net/dsa.h | 1 -
net/dsa/master.c | 52 ---
2 files changed, 13 insertions(+), 40 del
In preparation for adding another layer of call into a DSA stacked ops
singleton, wrap the ndo_do_ioctl() call into dev_do_ioctl().
Reviewed-by: Andrew Lunn
Signed-off-by: Florian Fainelli
---
net/core/dev_ioctl.c | 24 +---
1 file changed, 17 insertions(+), 7 deletions
-by: Florian Fainelli
---
include/net/dsa.h | 70 +++
1 file changed, 70 insertions(+)
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 6fa418ff1175..343642ca4f63 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -86,6 +86,18 @@ struct
On 7/19/2020 8:40 AM, Andrew Lunn wrote:
>> +#if IS_ENABLED(CONFIG_NET_DSA)
>> +#define dsa_build_ndo_op(name, arg1_type, arg1_name, arg2_type, arg2_name) \
>> +static int inline dsa_##name(struct net_device *dev, arg1_type arg1_name, \
>> + arg2_type arg2_name) \
On 7/19/2020 9:04 AM, Andrew Lunn wrote:
>> If we have the core network stack reference DSA as a module then we
>> force DSA to be either built-in or not, which is not very practical,
>> people would still want a modular choice to be possible. The static
>> inline only wraps indirect function
On 7/18/2020 2:18 PM, Vladimir Oltean wrote:
> On Fri, Jul 17, 2020 at 08:05:32PM -0700, Florian Fainelli wrote:
>> Make the core net_device code call into our ndo_do_ioctl() and
>> ndo_get_phys_port_name() functions via the wrappers defined previously
>>
>> Sign
On 7/18/2020 1:30 PM, Vladimir Oltean wrote:
> Hi Florian,
>
> On Fri, Jul 17, 2020 at 08:05:30PM -0700, Florian Fainelli wrote:
>> In preparation for adding another layer of call into a DSA stacked ops
>> singleton, wrap the ndo_do_ioctl() call into dev_do_ioct
do tests like dev->netdev_ops == _ops which
was not the case before since we were allocating an entirely new
structure.
Signed-off-by: Florian Fainelli
---
include/net/dsa.h | 1 -
net/dsa/master.c | 52 ---
2 files changed, 13 insertions(+), 40 del
(no known
in tree problems because of that though).
Let me know if this approach looks reasonable to you and we might do the
same with our ethtool_ops overloading as well.
Thanks!
Florian Fainelli (4):
net: Wrap ndo_do_ioctl() to prepare for DSA stacked ops
net: dsa: Add wrappers for overloaded
In preparation for adding another layer of call into a DSA stacked ops
singleton, wrap the ndo_do_ioctl() call into dev_do_ioctl().
Signed-off-by: Florian Fainelli
---
net/core/dev_ioctl.c | 24 +---
1 file changed, 17 insertions(+), 7 deletions(-)
diff --git a/net/core
-by: Florian Fainelli
---
include/net/dsa.h | 41 +
1 file changed, 41 insertions(+)
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 6fa418ff1175..681ba2752514 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -86,6 +86,18 @@ struct dsa_device_ops
Make the core net_device code call into our ndo_do_ioctl() and
ndo_get_phys_port_name() functions via the wrappers defined previously
Signed-off-by: Florian Fainelli
---
net/core/dev.c | 5 +
net/core/dev_ioctl.c | 5 +
2 files changed, 10 insertions(+)
diff --git a/net/core
On 7/17/2020 1:29 PM, Matthew Hagan wrote:
>
>
> On 16/07/2020 23:09, Jakub Kicinski wrote:
>> On Mon, 13 Jul 2020 21:50:26 +0100 Matthew Hagan wrote:
>>> Add names and decriptions of additional PORT0_PAD_CTRL properties.
>>>
>>> Signed-off-by: Matthew Hagan
>>> ---
>>>
On 7/17/2020 12:26 PM, Matthew Hagan wrote:
>
>
> On 16/07/2020 23:32, Andrew Lunn wrote:
>> On Thu, Jul 16, 2020 at 03:09:25PM -0700, Jakub Kicinski wrote:
>>> On Mon, 13 Jul 2020 21:50:26 +0100 Matthew Hagan wrote:
Add names and decriptions of additional PORT0_PAD_CTRL properties.
On 7/17/2020 2:45 AM, Sudeep Holla wrote:
> On Wed, Jul 15, 2020 at 03:43:24PM -0700, Florian Fainelli wrote:
>>
>>
>> On 7/15/2020 9:55 AM, Daniele Alessandrelli wrote:
>>> From: Daniele Alessandrelli
>>>
>>> Currently, when SMC/HVC is used
faster than the incoming
> 16K transfers. This issue is fixed by doubling the number of BDs
> that can be queued so that the entire 1M request can be queued
> without running out of buffers.
>
> Signed-off-by: Al Cooper
> Signed-off-by: Florian Fainelli
You can certainly
On 7/17/2020 8:23 AM, Al Cooper wrote:
> From: Florian Fainelli
>
> The BDC clock is optional and we may get an -EPROBE_DEFER error code
> which would not be propagated correctly, fix this by using
> devm_clk_get_optional().
>
> Signed-off-by: Florian Fainelli
S
On 7/17/2020 8:23 AM, Al Cooper wrote:
> From: Sasi Kumar
>
> Multiple connects/disconnects can cause a crash on the second
> disconnect. The driver had a problem where it would try to send
> endpoint commands after it was disconnected which is not allowed
> by the hardware. The fix is to
On 7/17/2020 8:23 AM, Al Cooper wrote:
> Add compatible string for some newer boards that only have this
> as there match sting.
>
> Signed-off-by: Al Cooper
This looks good to me, however you should also include it in the binding
document.
--
Florian
add WAKE_FILTER support")
> Signed-off-by: Doug Berger
Acked-by: Florian Fainelli
--
Florian
RBUF_ACPI_EN flag when Wake
> on Filter is enabled. A clear flag indicates that the GENET
> hardware must have been reset so the remainder of the
> hardware programming is bypassed.
>
> Fixes: f50932cca632 ("net: bcmgenet: add WAKE_FILTER support")
> Signed-off-by: Doug Berger
Acked-by: Florian Fainelli
--
Florian
e MPD_EN flag when Wake on
> Magic Packet is enabled. A clear flag indicates that the
> GENET hardware must have been reset so the remainder of the
> hardware programming is bypassed.
>
> Fixes: 1a1d5106c1e3 ("net: bcmgenet: move clk_wol management to bcmgenet_wol")
>
On 7/13/2020 1:50 PM, Matthew Hagan wrote:
> Add names and decriptions of additional PORT0_PAD_CTRL properties.
>
> Signed-off-by: Matthew Hagan
> ---
> Documentation/devicetree/bindings/net/dsa/qca8k.txt | 8
> 1 file changed, 8 insertions(+)
>
> diff --git
On 7/16/2020 7:13 AM, Daniele Alessandrelli wrote:
> Hi Florian,
>
> Thanks for you feedback.
>
> On Wed, 2020-07-15 at 15:43 -0700, Florian Fainelli wrote:
>>
>> On 7/15/2020 9:55 AM, Daniele Alessandrelli wrote:
>>> From: Daniele Alessandrelli
>
On 7/15/2020 8:32 PM, Chris Healy wrote:
>
>
> On Wed, Jul 15, 2020 at 8:10 PM Florian Fainelli <mailto:f.faine...@gmail.com>> wrote:
>
>
>
> On 7/14/2020 10:59 AM, Chris Healy wrote:
> > Some Cotsworks SFF have invalid data in the first fe
On 7/14/2020 10:59 AM, Chris Healy wrote:
> Some Cotsworks SFF have invalid data in the first few bytes of the
> module EEPROM. This results in these modules not being detected as
> valid modules.
>
> Address this by poking the correct EEPROM values into the module
> EEPROM when the model/PN
Le 2020-07-15 à 18:28, Randy Dunlap a écrit :
> From: Randy Dunlap
>
> Change doubled word "is" to "it is".
>
> Signed-off-by: Randy Dunlap
> Cc: Florian Fainelli
> Cc: bcm-kernel-feedback-l...@broadcom.com
> Cc: linux-m...@vger.kernel.org
Acked
On 7/15/2020 9:55 AM, Daniele Alessandrelli wrote:
> From: Daniele Alessandrelli
>
> Currently, when SMC/HVC is used as transport, the base address of the
> shared memory used for communication is not passed to the SMCCC call.
> This means that such an address must be hard-coded into the
e running on the RPi VideoCore can be used to reset and
>>>> initialize HW controlled by the firmware.
>>>>
>>>> Signed-off-by: Nicolas Saenz Julienne
>>>> Reviewed-by: Florian Fainelli
>>>>
>>>> ---
>>>> Changes
On 7/13/2020 7:23 PM, Xu Wang wrote:
> platform_get_resource() may return NULL, add proper
> check to avoid potential NULL dereferencing.
>
> Signed-off-by: Xu Wang
> ---
If you use devm_ioremap_resource() you can remove the !res check
entirely which would be equally acceptable as a fix.
>
On 7/12/2020 8:30 PM, Chunfeng Yun wrote:
> Use readl_poll_timeout() to poll register status
>
> Cc: Florian Fainelli
> Signed-off-by: Chunfeng Yun
> ---
> v2 changes, suggested by Stephen:
> 1. use unsigned int instead of int for @usec parameter
> 2. add dev_log
On 7/11/2020 2:07 PM, Linus Walleij wrote:
> On Wed, Jul 1, 2020 at 6:44 AM Florian Fainelli wrote:
>> On 6/30/2020 9:37 PM, Mark Tomlinson wrote:
>
>>> That was one of my thoughts too. I found someone had tried that
>>> earlier, but it was rejected:
>>&g
The Broadcom BDC driver did not have a MAINTAINERS entry which made it
escape review from Al and myself, add an entry so the relevant mailing
lists and people are copied.
Signed-off-by: Florian Fainelli
---
MAINTAINERS | 8
1 file changed, 8 insertions(+)
diff --git a/MAINTAINERS b
ARCH_BRCMSTB makes use of the irq-bcm7038-l1.c irqchip driver, enable
it.
Signed-off-by: Florian Fainelli
---
arch/arm/mach-bcm/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 6aa938b949db..52ce6febf6ea 100644
--- a/arch
We need to have a definition for cpu_logical_map[] which on ARM
platforms is provided by asm/smp_plat.h. This header is not
automatically included from linux/smp.h and untangling it is a bit
difficult.
Signed-off-by: Florian Fainelli
---
drivers/irqchip/irq-bcm7038-l1.c | 3 +++
1 file changed
Do not print the full function name (brcmstb_gisb_arb_decode_addr) which
is quite long, and reduces our chances to printing a full line, instead
just use "GISB: " as a prefix for these prints.
Signed-off-by: Florian Fainelli
---
drivers/bus/brcmstb_gisb.c | 4 ++--
1 file changed, 2
Signed-off-by: Florian Fainelli
---
arch/arm/include/debug/brcmstb.S | 24 +---
1 file changed, 13 insertions(+), 11 deletions(-)
diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S
index 132a20c4a676..79223209d3f4 100644
--- a/arch/arm/include
The UPG_AUX_AON_INTR2 Level 2 interrupt controller node is defined with
the "brcm,upg-aux-aon-l2-intc" compatible string in Device Tree and
behaves as an edge triggered standard Broadcom STB L2 interrupt
controller.
Signed-off-by: Florian Fainelli
---
drivers/irqchip/irq-brcmstb-l2.c
From: Kamal Dasu
The HIF_SPI_INTR2 Level 2 interrupt controller node is defined with the
"brcm,hif-spi-l2-intc" compatible string in Device Tree and behaves as
an edge triggered standard Broadcom STB L2 interrupt controller.
Signed-off-by: Kamal Dasu
Signed-off-by: Floria
Define the compatible string brcm,upg-aux-aon-l2-intc which is used by
the Broadcom STB UPG auxiliary always-on interrupt controller.
Signed-off-by: Florian Fainelli
---
.../devicetree/bindings/interrupt-controller/brcm,l2-intc.txt| 1 +
1 file changed, 1 insertion(+)
diff --git
e_irq_wake() is called early on.
Signed-off-by: Justin Chen
Signed-off-by: Florian Fainelli
---
drivers/irqchip/irq-brcmstb-l2.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/irqchip/irq-brcmstb-l2.c b/drivers/irqchip/irq-brcmstb-l2.c
index 0298ede67e51..157fad184bdc 100644
---
Add documentation for the brcm,hif-spi-l2-intc compatible string to the
brcm,l2-intc.txt binding document.
Signed-off-by: Florian Fainelli
---
.../devicetree/bindings/interrupt-controller/brcm,l2-intc.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git
a/Documentation
Hi Marc,
This patch series contains a number of updates for Broadcom STB L2
interrupt controllers to enable them as wake-up interrupt controllers,
and add missing compatible strings that should be matched.
Thanks!
Florian Fainelli (3):
dt-bindings: interrupt-controller: Document Broadcom STB
e_irq_wake() is called early on.
Signed-off-by: Justin Chen
Signed-off-by: Florian Fainelli
---
drivers/irqchip/irq-bcm7120-l2.c | 8 +---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/irqchip/irq-bcm7120-l2.c b/drivers/irqchip/irq-bcm7120-l2.c
index 586df3587be0..c7
]
Signed-off-by: Florian Fainelli
---
Changes in v2:
- added missing hunk in hyp/entry.S per Will's feedback
arch/arm64/kernel/entry.S | 2 ++
arch/arm64/kvm/hyp/entry.S | 2 ++
arch/arm64/kvm/hyp/hyp-entry.S | 4
3 files changed, 8 insertions(+)
diff --git a/arch/arm64/kernel
On 7/8/2020 9:36 PM, Naresh Kamboju wrote:
> While running LTP cpuhotplug test on mainline 5.8.0-rc4 the kernel BUG noticed
> on arm64 Juno-r2 KASAN config enabled kernel.
>
> steps to reproduce:
> - boot KASAN enabled Juno-r2 device
> - cd /opt/ltp
> - ./runltp -f cpuhotplug
>
> metadata:
>
: a9e821b89daa ("arm64: Add KRYO4XX gold CPU cores to erratum list 1463225
and 1418040")
Signed-off-by: Florian Fainelli
---
arch/arm64/kernel/cpu_errata.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index 8e
than
> the u16 so the end result is always zero. Remove the second explicit
> shift as this is extraneous.
>
> Fixes: 6e9fdb60d362 ("net: systemport: Add support for VLAN transmit
> acceleration")
> Addresses-Coverity: ("Operands don't affect result")
>
Now that we have moved the PHY ethtool statistics to be dynamically
registered, we no longer need to inline those for ethtool. This used to
be done to avoid cross symbol referencing and allow ethtool to be
decoupled from PHYLIB entirely.
Signed-off-by: Florian Fainelli
---
drivers/net/phy/phy.c
since we could have DSA register its own ethtool_phy_ops instance
instead of overloading the ethtool_ops.
Florian Fainelli (2):
net: phy: Define PHY statistics ethtool_phy_ops
net: phy: Uninline PHY ethtool statistics operations
drivers/net/phy/phy.c| 48
Extend ethtool_phy_ops to include the 3 function pointers necessary for
implementing PHY statistics. In a subsequent change we will uninline
those functions.
Signed-off-by: Florian Fainelli
---
drivers/net/phy/phy_device.c | 3 +++
include/linux/ethtool.h | 7 +++
2 files changed, 10
We have a number of error conditions that can lead to the driver not
probing successfully, move the print when we are sure
dsa_register_switch() has suceeded. This avoids repeated prints in case
of probe deferral for instance.
Signed-off-by: Florian Fainelli
---
drivers/net/dsa/dsa_loop.c | 11
901 - 1000 of 8558 matches
Mail list logo
