When trying to compile SimGear-0.0.12 under 2.2.16, with gcc-2.95.2,
I could (quite reproducibly) cause an unbounded number of:
VM: do_try_to_free_pages failed for x
where x was cc1plus, kswapd, syslogd, etc.
Under 2.2.17pre20, this still start to happen, but shortly thereafter
the
The last message I see is "Calibrating delay loop"
(I see this thaks to the Jtag debugger for Elan520 because
I haven't configured the VGA board yet).
I've seen this on a board with a BIOS problem. I think it is caused because the
Kernel is in a loop waiting for a timer interrupt to occur.
hat the flow control says. Perhaps there are some hardware differences
in the configuration of the control signal pull-up/downs.
Jon Burgess
PLANET PROJECT will connect millions of people worldwide through the combined
technology of 3Com and the Internet. Find out more and
What is the output of 'lspci -v'? If it says that the chip revision is '78' then
this is one of the new 3C905CX (note the CX) NIC's or ASIC on the motherboard.
I've seen a problem with the 3c59x.c driver and this chip, it can send packets
but not receive any. The 3Com 3c90x-1.0.0i.tgz driver at
When using Linux-2.2.17 + ide.2.2.17.all.2904.patch on a board with the
CS5530, doing the following generates a kernel NULL dereference:
pb-3com# cat /proc/ide/cs5530
Unable to handle kernel NULL pointer dereference at virtual address 003c
...
This is caused because the 'bmide_dev' in
I have never tried it myself but it looks like it might do what you want:
http://oss.sgi.com/projects/fam/
fam and imon FAQ
===
What is fam?
fam, the File Alteration Monitor, provides an API which applications can use to
be notified when specific files or directories are
On Fri, 2007-04-27 at 22:46 +0200, Markus Rechberger wrote:
just for the completeness, what does dmesg show up?
You forgot to mention what device you have too...
Markus
On 4/27/07, Gregoire Favre [EMAIL PROTECTED] wrote:
Hello,
I have a computer (mother Asus Commando) with 4x1Gb Ram.
On Fri, 2007-04-27 at 18:06 -0400, Lee Revell wrote:
On 4/27/07, Jon Burgess [EMAIL PROTECTED] wrote:
Interesting - I see similar symptoms after upgrading my PC:
* old PC was AMD Athlon 64 3000 w/ 2GB of RAM which had no issues
* new PC is a Intel Core 2 Duo w/ 4GB of RAM and fails
On Fri, 2007-04-27 at 18:06 -0400, Lee Revell wrote:
On 4/27/07, Jon Burgess [EMAIL PROTECTED] wrote:
Interesting - I see similar symptoms after upgrading my PC:
* old PC was AMD Athlon 64 3000 w/ 2GB of RAM which had no issues
* new PC is a Intel Core 2 Duo w/ 4GB of RAM and fails
On Sat, 2007-04-28 at 18:17 +0100, Jon Burgess wrote:
On Fri, 2007-04-27 at 18:06 -0400, Lee Revell wrote:
On 4/27/07, Jon Burgess [EMAIL PROTECTED] wrote:
Interesting - I see similar symptoms after upgrading my PC:
* old PC was AMD Athlon 64 3000 w/ 2GB of RAM which had no issues
On Mon, 2007-04-30 at 18:52 +0200, Gregoire Favre wrote:
On Sat, Apr 28, 2007 at 09:14:37PM +0100, Jon Burgess wrote:
While the above patch works, it seems the underlying causes is that
vmalloc_32() is providing memory above 4Gb on x86-64 which is not what
the driver expects. This same
On Tue, 2007-05-01 at 11:41 +0200, Gregoire Favre wrote:
Hello again,
just forgot this :
ksymoops 2.4.11 on x86_64 2.6.21. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.6.21/ (default)
-m
>> Before 2.2.18. Now I've tested with both
>> 2.4.1-pre12 and 2.4.1. 2.4 kernel klogd is
>> always using 99% cpu. What gives?
>>
> Can you try 2.4.0? Are you using the 3c59x ethernet driver? I've got the
> same problem on one of my machines, (see message with subject "2.4.1-pre10
> ->
> When trying to compile SimGear-0.0.12 under 2.2.16, with gcc-2.95.2,
> I could (quite reproducibly) cause an unbounded number of:
>
> VM: do_try_to_free_pages failed for x
>
>where x was cc1plus, kswapd, syslogd, etc.
>
>Under 2.2.17pre20, this still start to happen, but shortly thereafter
>The last message I see is "Calibrating delay loop"
>(I see this thaks to the Jtag debugger for Elan520 because
>I haven't configured the VGA board yet).
I've seen this on a board with a BIOS problem. I think it is caused because the
Kernel is in a loop waiting for a timer interrupt to
tput is dumped to /dev/null if DCD is not asserted no
matter what the flow control says. Perhaps there are some hardware differences
in the configuration of the control signal pull-up/downs.
Jon Burgess
PLANET PROJECT will connect millions of people worldwide through the combined
technology
Yes it could be a modem on the line, so my comment about DCD is wrong, a comms
program must be able to send AT commands to the modem when DCD is not asserted
before the call is setup. I was being confused by the login getty which we run
on the same serial port. This drops back to the login
What is the output of 'lspci -v'? If it says that the chip revision is '78' then
this is one of the new 3C905CX (note the CX) NIC's or ASIC on the motherboard.
I've seen a problem with the 3c59x.c driver and this chip, it can send packets
but not receive any. The 3Com 3c90x-1.0.0i.tgz driver at
When using Linux-2.2.17 + ide.2.2.17.all.2904.patch on a board with the
CS5530, doing the following generates a kernel NULL dereference:
pb-3com# cat /proc/ide/cs5530
Unable to handle kernel NULL pointer dereference at virtual address 003c
...
This is caused because the 'bmide_dev' in
I have never tried it myself but it looks like it might do what you want:
http://oss.sgi.com/projects/fam/
fam and imon FAQ
===
What is fam?
fam, the File Alteration Monitor, provides an API which applications can use to
be notified when specific files or directories are
On Fri, 2007-04-27 at 22:46 +0200, Markus Rechberger wrote:
> just for the completeness, what does dmesg show up?
> You forgot to mention what device you have too...
>
> Markus
>
> On 4/27/07, Gregoire Favre <[EMAIL PROTECTED]> wrote:
> > Hello,
> >
> > I have a computer (mother Asus Commando)
On Fri, 2007-04-27 at 18:06 -0400, Lee Revell wrote:
> On 4/27/07, Jon Burgess <[EMAIL PROTECTED]> wrote:
> > Interesting - I see similar symptoms after upgrading my PC:
> > * old PC was AMD Athlon 64 3000 w/ 2GB of RAM which had no issues
> > * new PC is a Intel Core 2
On Fri, 2007-04-27 at 18:06 -0400, Lee Revell wrote:
> On 4/27/07, Jon Burgess <[EMAIL PROTECTED]> wrote:
> > Interesting - I see similar symptoms after upgrading my PC:
> > * old PC was AMD Athlon 64 3000 w/ 2GB of RAM which had no issues
> > * new PC is a Intel Core 2
On Sat, 2007-04-28 at 18:17 +0100, Jon Burgess wrote:
> On Fri, 2007-04-27 at 18:06 -0400, Lee Revell wrote:
> > On 4/27/07, Jon Burgess <[EMAIL PROTECTED]> wrote:
> > > Interesting - I see similar symptoms after upgrading my PC:
> > > * old PC was AMD Athlo
On Mon, 2007-04-30 at 18:52 +0200, Gregoire Favre wrote:
> On Sat, Apr 28, 2007 at 09:14:37PM +0100, Jon Burgess wrote:
>
> > While the above patch works, it seems the underlying causes is that
> > vmalloc_32() is providing memory above 4Gb on x86-64 which is not what
>
On Tue, 2007-05-01 at 11:41 +0200, Gregoire Favre wrote:
> Hello again,
>
> just forgot this :
>
> ksymoops 2.4.11 on x86_64 2.6.21. Options used
> -V (default)
> -k /proc/ksyms (default)
> -l /proc/modules (default)
> -o /lib/modules/2.6.21/ (default)
> -m
26 matches
Mail list logo
