[PATCH v3 08/16] dt-bindings: phy-qcom-qusb2: Update binding for QUSB2 V2 version

Update generic compatible string for QUSB2 V2 PHY. This will allow all targets using QUSB2 V2 use same string. Acked-by: Rob Herring Signed-off-by: Manu Gautam --- Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt | 5 - 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a

[PATCH v3 07/16] phy: qcom-qusb2: Add support for different register layouts

New version of QUSB2 PHY has some registers offset changed. Add support to have register layout for a target and update the same in phy_configuration. Signed-off-by: Manu Gautam --- drivers/phy/qualcomm/phy-qcom-qusb2.c | 131 -- 1 file changed, 95 insertions

[PATCH v3 06/16] phy: qcom-qmp: Move SERDES/PCS START after PHY reset

Driver is currently performing PHY reset after starting SERDES/PCS. As per hardware datasheet reset must be done before starting PHY. Hence, update the sequence. Signed-off-by: Manu Gautam --- drivers/phy/qualcomm/phy-qcom-qmp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff

[PATCH v3 09/16] phy: qcom-qusb2: Add support for QUSB2 V2 version

Use register layout to add additional registers present on QUSB2 PHY V2 version for PHY initialization. Other than new registers on V2, following two register's offset and bit definitions are different: POWERDOWN control and PLL_STATUS. Signed-off-by: Manu Gautam --- drivers/phy/qualcom

[PATCH v3 15/16] phy: qcom-qusb2: Add support for runtime PM

Disable clocks and enable DP/DM wakeup interrupts when suspending PHY. Core driver should notify speed to PHY driver to enable appropriate DP/DM wakeup interrupts polarity in suspend state. Signed-off-by: Manu Gautam --- drivers/phy/qualcomm/phy-qcom-qusb2.c | 181

[PATCH v3 12/16] dt-bindings: phy-qcom-qmp: Update bindings for QMP V3 USB PHY

Update compatible string and clock names for QMP version V3 USB PHY. Acked-by: Rob Herring Signed-off-by: Manu Gautam --- Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 6 +- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/phy/qcom

[PATCH v3 13/16] phy: qcom-qmp: Add support for QMP V3 USB3 PHY

QMP V3 USB3 PHY is a DisplayPort (DP) and USB combo PHY with dual RX/TX lanes to support type-c. There is a separate block DP_COM for configuration related to type-c or DP. Add support for dp_com region and secondary rx/tx lanes initialization. Signed-off-by: Manu Gautam --- drivers/phy

[PATCH v3 16/16] phy: qcom-qmp: Add support for runtime PM

Disable clocks and enable PHY autonomous mode to detect wakeup events when PHY is suspended. Core driver should notify speed to PHY driver to enable LFPS and/or RX_DET interrupts. Signed-off-by: Manu Gautam --- drivers/phy/qualcomm/phy-qcom-qmp.c | 185

[PATCH v3 14/16] phy: Add notify_speed callback

. Similarly QMP USB3 PHY in SS mode should monitor RX terminations attach/detach and LFPS events depending on SSPHY is active or not. Signed-off-by: Manu Gautam --- drivers/phy/phy-core.c | 30 ++ include/linux/phy/phy.h | 26 ++ 2 files changed, 56

[PATCH v3 11/16] phy: qcom-qmp: Add register offsets for QMP V3 PHY

Registers offsets for QMP V3 PHY are changed from previous versions (1/2), update same in header file. Signed-off-by: Manu Gautam --- drivers/phy/qualcomm/phy-qcom-qmp.h | 149 1 file changed, 149 insertions(+) diff --git a/drivers/phy/qualcomm/phy-qcom

<    1   2   3