Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Signed-off-by: G, Manjunath Kondaiah manj...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
Acked-by: Felipe Balbi ba...@ti.com
---
This patch was posted as a series initially
http://www.spinics.net/lists/linux-omap
Adapt keypad to use pinctrl framework.
Tested on omap4430 sdp with 3.7-rc1 kernel.
Cc: Felipe Balbi ba...@ti.com
Cc: Dmitry Torokhov dmitry.torok...@gmail.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
drivers/input/keyboard/omap4-keypad.c |8
1 files changed, 8
Currently, omap4 keypad mux settings are done in the board file.
Populate the mux settings in the dts file for the keypad to
work via dt.
Cc: Felipe Balbi ba...@ti.com
Tested on omap4430 sdp with 3.7-rc1.
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
arch/arm/boot/dts/omap4-sdp.dts
Adapt keypad to use pinctrl framework.
Tested on omap4430 sdp with 3.7-rc1 kernel.
Cc: Felipe Balbi ba...@ti.com
Cc: Dmitry Torokhov dmitry.torok...@gmail.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
v1-v2
- Added PROBE_DEFER check
drivers/input/keyboard/omap4-keypad.c | 11
Currently, omap4 keypad mux settings are done in the board file.
Populate the mux settings in the dts file for the keypad to
work via dt.
Tested on omap4430 sdp with 3.7-rc1.
Cc: Felipe Balbi ba...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
v1-v2
change the hex letter to lower
ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Signed-off-by: G, Manjunath Kondaiah manj...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
Acked-by: Felipe Balbi ba...@ti.com
---
v4-v5
- changed to use manage resource input framework
- rearrange report event into a seperate
.
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
arch/arm/boot/dts/omap5-evm.dts | 95 +++
1 files changed, 95 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts
index c663eba..b812d6d 100644
Hi Kevin,
On Thursday 11 April 2013 07:45 PM, Kevin Hilman wrote:
Kevin Hilmankhil...@linaro.org writes:
Bedia, Vaibhavvaibhav.be...@ti.com writes:
Hi Sourav,
On Wed, Apr 10, 2013 at 15:13:44, Poddar, Sourav wrote:
[...]
Yes, had a look at that and found your situation similar to UART.
Since uart_console definition is now moved to serial core
haeder file . Serial drivers need not define them.
Cc: Sylvain Munaut t...@246tnt.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Rajendra nayak rna...@ti.com
Signed-off-by: Sourav Poddar sourav.pod
files.
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Rajendra nayak rna...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
arch/arm/mach-omap2/omap_device.c |3 ---
arch/arm/mach-omap2/serial.c |7 ---
2 files changed, 0 insertions
Remove the OMAP_DEVICE_NO_IDLE_ON_SUSPEND check, since UART was the only one
making
use of it. Now serial core/driver takes care of the case when
no_console_suspend
is used in the bootargs and you need to keep the clock enable for console even
while suspend.
Signed-off-by: Sourav Poddar
Move uart_console definition to serial core header file, so that it can be
used by serial drivers.
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Rajendra nayak rna...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
drivers/tty/serial/serial_core.c
: Santosh Shilimkar santosh.shilim...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Rajendra nayak rna...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
arch/arm/boot/dts/am33xx.dtsi |1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boot/dts/am33xx.dtsi b
/gmane.linux.ports.arm.omap/95828
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Rajendra nayak rna...@ti.com
Sourav Poddar (6):
drivers: tty: serial: Move uart_console def to core header file.
drivers: serial: mpc52xx_uart: Remove uart_console defintion
driver: serial
that clocks remain active for the
console
uart when no_console_suspend is used in the bootargs.
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
drivers/tty/serial/omap-serial.c | 20
1 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/drivers/tty/serial/omap
On Thursday 18 April 2013 09:26 AM, Felipe Balbi wrote:
On Wed, Apr 17, 2013 at 05:04:23PM +0530, Sourav Poddar wrote:
Since uart_console definition is now moved to serial core
haeder file . Serial drivers need not define them.
Cc: Sylvain Munautt...@246tnt.com
Cc: Santosh
Hi Russell,
On Thursday 18 April 2013 04:20 PM, Russell King - ARM Linux wrote:
On Wed, Apr 17, 2013 at 05:04:23PM +0530, Sourav Poddar wrote:
Since uart_console definition is now moved to serial core
haeder file . Serial drivers need not define them.
This needs to be part of patch 1. Having
Hi Felipe,
On Thursday 18 April 2013 09:28 AM, Felipe Balbi wrote:
Hi,
On Wed, Apr 17, 2013 at 05:04:24PM +0530, Sourav Poddar wrote:
@@ -1632,6 +1650,8 @@ static const struct dev_pm_ops serial_omap_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(serial_omap_suspend, serial_omap_resume
Hi Kevin,
On Thursday 18 April 2013 11:26 PM, Kevin Hilman wrote:
Sourav Poddarsourav.pod...@ti.com writes:
The patch adapt the serial core/driver to take care of the case when
no_console_suspend
is used in the bootargs. The patch will remove dependency to set od-flags to
On Thursday 18 April 2013 11:35 PM, Kevin Hilman wrote:
Sourav Poddarsourav.pod...@ti.com writes:
Remove the OMAP_DEVICE_NO_IDLE_ON_SUSPEND check, since UART was the only one
making
use of it. Now serial core/driver takes care of the case when
no_console_suspend
is used in the bootargs and
Hi Kevin,
On Thursday 18 April 2013 11:39 PM, Kevin Hilman wrote:
Sourav Poddarsourav.pod...@ti.com writes:
Since the omap serial driver is now adapted to handle the
case where you dont need to cut the clock on suspend while
using no_console_suspend in the bootargs.
We can get rid of the
Hi Kevin,
On Thursday 18 April 2013 11:41 PM, Kevin Hilman wrote:
Sourav Poddarsourav.pod...@ti.com writes:
Since the omap serial driver is now adapted to handle the
case where you dont need to cut the clock on suspend while
using no_console_suspend in the bootargs.
We can get rid of the
posting
this as a new series.
This patches are based on 3.9-rc3 custom tree which has
Santosh Shilimkar serial patch[1]
[1]: http://permalink.gmane.org/gmane.linux.ports.arm.omap/95828
Cc: Santosh Shilimkarsantosh.shilim...@ti.com
Cc: Felipe Balbiba...@ti.com
Cc: Rajendra nayakrna...@ti.com
Sourav
Hi Kevin,
On Friday 19 April 2013 03:33 AM, Kevin Hilman wrote:
Sourav Poddarsourav.pod...@ti.com writes:
On Thursday 18 April 2013 11:35 PM, Kevin Hilman wrote:
Sourav Poddarsourav.pod...@ti.com writes:
Remove the OMAP_DEVICE_NO_IDLE_ON_SUSPEND check, since UART was the only one
making
Hi Grygorii,
On Friday 19 April 2013 05:32 PM, Grygorii Strashko wrote:
On 04/18/2013 10:17 PM, Sourav Poddar wrote:
Hi Kevin,
On Thursday 18 April 2013 11:53 PM, Kevin Hilman wrote:
Hi Sourav,
Sourav Poddarsourav.pod...@ti.com writes:
Hi,
This patch series contains fixes and cleanups
Hi Kevin,
On Friday 19 April 2013 08:22 PM, Kevin Hilman wrote:
Sourav Poddarsourav.pod...@ti.com writes:
[...]
Yes, got your point. omap_device_idle should not be called only
for console uart.
Just did a quick testing by including the following hunk on top of my
patch series..
diff --git
Hi Kevin,
On Wednesday 03 April 2013 11:18 PM, Kevin Hilman wrote:
Sourav Poddarsourav.pod...@ti.com writes:
Hi Kevin,
On Wednesday 20 March 2013 05:36 PM, Sourav Poddar wrote:
Realised the list to whom the patch was send got dropped. Ccing
them all..
On Wednesday 20 March 2013 05:18 PM
Hi Santosh,
On Friday 05 April 2013 12:45 PM, Santosh Shilimkar wrote:
On Friday 05 April 2013 12:38 PM, Sourav Poddar wrote:
Hi Kevin,
On Wednesday 03 April 2013 11:18 PM, Kevin Hilman wrote:
Sourav Poddarsourav.pod...@ti.com writes:
Hi Kevin,
On Wednesday 20 March 2013 05:36 PM, Sourav
...@ti.com
Cc: Rajendra nayakrna...@ti.com
Tested on omap5430evm, omap4430sdp.
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
v2-v3
Based on Kevin Hilman and Santosh Shilimkar comments, modified
serial core/driver layer to bypass runtime suspend
for console uart while using no_console_suspend
will effect ocmcram case
and I am inling them
just for discussion.
I am not sure, if there is any other cleaner way of getting around this
no_idle_on_suspend flag
as they are getting used for ocmcram also. ?
Thanks,
Sourav
[1]:
From: Sourav Poddar sourav.pod...@ti.com
Date: Wed, 13 Mar 2013 20:32:36
Hi Russell,
On Monday 08 April 2013 10:44 PM, Russell King - ARM Linux wrote:
On Fri, Apr 05, 2013 at 06:45:33PM +0530, Sourav Poddar wrote:
With dt boot, uart wakeup after suspend is non functional while using
no_console_suspend in the bootargs. With no_console_suspend used, we
should prevent
Hi,
On Wednesday 10 April 2013 12:37 AM, Kevin Hilman wrote:
Sourav Poddarsourav.pod...@ti.com writes:
Hi Kevin,
On Friday 05 April 2013 11:10 PM, Kevin Hilman wrote:
Sourav Poddarsourav.pod...@ti.com writes:
With dt boot, uart wakeup after suspend is non functional while using
Hi Vaibhav,
On Wednesday 10 April 2013 11:49 AM, Bedia, Vaibhav wrote:
Hi Sourav, Kevin,
On Wed, Apr 10, 2013 at 11:37:28, Poddar, Sourav wrote:
Hi,
On Wednesday 10 April 2013 12:37 AM, Kevin Hilman wrote:
Sourav Poddarsourav.pod...@ti.com writes:
Hi Kevin,
On Friday 05 April 2013 11:10
Hi Kevin,
On Wednesday 20 March 2013 05:36 PM, Sourav Poddar wrote:
Realised the list to whom the patch was send got dropped. Ccing them
all..
On Wednesday 20 March 2013 05:18 PM, Sourav Poddar wrote:
Hi Kevin,
On Tuesday 19 March 2013 12:24 AM, Kevin Hilman wrote:
Sourav Poddarsourav.pod
Hi,
On Tuesday 02 April 2013 03:36 PM, Michael Trimarchi wrote:
Hi
On 02/04/13 11:50, Sourav Poddar wrote:
Hi Kevin,
On Wednesday 20 March 2013 05:36 PM, Sourav Poddar wrote:
Realised the list to whom the patch was send got dropped. Ccing them all..
On Wednesday 20 March 2013 05:18 PM
Hi,
On Tuesday 02 April 2013 04:14 PM, Michael Trimarchi wrote:
Hi
On 02/04/13 12:39, Sourav Poddar wrote:
Hi,
On Tuesday 02 April 2013 03:36 PM, Michael Trimarchi wrote:
Hi
On 02/04/13 11:50, Sourav Poddar wrote:
Hi Kevin,
On Wednesday 20 March 2013 05:36 PM, Sourav Poddar wrote:
Realised
.
Cc: Santosh Shilimkarsantosh.shilim...@ti.com
Cc: Felipe Balbiba...@ti.com
Cc: Rajendra nayakrna...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
v1-v2
These patches were sent before as a series[1], but realised
core_initcall(omap_serial_early_init) in serial.c get executed
Hi,
On Tuesday 02 April 2013 07:04 PM, Michael Trimarchi wrote:
Hi
On 02/04/13 15:28, Sourav Poddar wrote:
With dt boot, uart wakeup after suspend is non functional while using
no_console_suspend in the bootargs. With no_console_suspend used, od-flags
should be ORed
/resume
support.
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Rajendra nayak rna...@ti.com
Sourav Poddar (2):
driver: serial-omap: move max uart count into generic header file.
arm: mach-omap2: prevent UART console idle on suspend while using
OMAP_MAX_HSUART_PORTS is moved to omap_serial header file.
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Rajendra nayak rna...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
drivers/tty/serial/omap-serial.c |2 --
include/linux
, this was taken care by platform
data.
Tested on omap5430evm, omap4430sdp.
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Rajendra nayak rna...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
arch/arm/mach-omap2/omap_device.c | 35
Hi,
On Monday 18 March 2013 04:24 PM, Sourav Poddar wrote:
The first patch is a rearrangement of a macro OMAP_MAX_HSUART_PORTS
to a header file so that it can be used in other file.
The second patch fixes the wakeup from uart issue while using
no_console_suspend in the
bootargs.
These patches
, this was taken care by platform
data.
Tested on omap5430evm, omap4430sdp.
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Rajendra nayak rna...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
arch/arm/mach-omap2/omap_device.c | 34
Hi Kevin,
On Tuesday 19 March 2013 12:15 AM, Kevin Hilman wrote:
Sourav Poddarsourav.pod...@ti.com writes:
OMAP_MAX_HSUART_PORTS is moved to omap_serial header file.
Why?
The patch is a prerequisitive for the next patch in the series, where I am
making use of the max number of uarts, omap
Realised the list to whom the patch was send got dropped. Ccing them all..
On Wednesday 20 March 2013 05:18 PM, Sourav Poddar wrote:
Hi Kevin,
On Tuesday 19 March 2013 12:24 AM, Kevin Hilman wrote:
Sourav Poddarsourav.pod...@ti.com writes:
With dt boot, uart wakeup after suspend is non
Hi Kevin,
On Wednesday 20 March 2013 05:36 PM, Sourav Poddar wrote:
Realised the list to whom the patch was send got dropped. Ccing them
all..
On Wednesday 20 March 2013 05:18 PM, Sourav Poddar wrote:
Hi Kevin,
On Tuesday 19 March 2013 12:24 AM, Kevin Hilman wrote:
Sourav Poddarsourav.pod
to OMAP5 DeviceTree file
Sourav Poddar (4):
arm: dts: omap4-sdp: Add I2c pinctrl data
arm: dts: omap5-evm: Add I2c pinctrl data
arm: dts: omap4-panda: Add I2c pinctrl data
arm: dts: omap5-evm: Add mcspi data
arch/arm/boot/dts/omap4-panda.dts | 40 ++
arch/arm
This happens because omap5 dts file is not adapted to use i2c through pinctrl
framework. Populating i2c pinctrl data to get rid of the error.
Tested on omap5430 evm with 3.8-rc6 kernel.
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
arch/arm/boot/dts/omap5-evm.dts | 62
From: Felipe Balbi ba...@ti.com
Add all 4 mcspi instances to omap5.dtsi file.
Signed-off-by: Felipe Balbi ba...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
arch/arm/boot/dts/omap5.dtsi | 40
1 files changed, 40 insertions(+), 0
Add mcspi node and pinmux data for omap5 mcspi controller.
Tested on omap5430 evm with 3.8-rc6 custom kernel.
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
arch/arm/boot/dts/omap5-evm.dts | 46 +++
1 files changed, 46 insertions(+), 0 deletions
rev0.11 at 400 kHz
[0.483398] Switching to clocksource 32k_counter
This happens because omap4 panda dts file is not adapted to use i2c through
pinctrl framework. Populating i2c pinctrl data to get rid of the error.
Tested on omap4460 panda with 3.8-rc6 kernel.
Signed-off-by: Sourav Poddar
This happens because omap4 dts file is not adapted to use i2c through pinctrl
framework. Populating i2c pinctrl data to get rid of the error.
Tested on omap4430 sdp with 3.8-rc6 kernel.
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
Reported-by: Santosh Shilimkar santosh.shilim...@ti.com
Patch series adds omap5 evm mcspi nodes and pinctrl
data in omap5.dtsi and omap5-evm.dts files.
Felipe Balbi (1):
arm: dts: omap5: add SPI devices to OMAP5 DeviceTree file
Sourav Poddar (1):
arm: dts: omap5-evm: Add mcspi data
arch/arm/boot/dts/omap5-evm.dts | 46
From: Felipe Balbi ba...@ti.com
Add all 4 mcspi instances to omap5.dtsi file.
Signed-off-by: Felipe Balbi ba...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
arch/arm/boot/dts/omap5.dtsi | 40
1 files changed, 40 insertions(+), 0
Add mcspi node and pinmux data for omap5 mcspi controller.
Tested on omap5430 evm with 3.8-rc4 custom kernel.
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
v1-v2
Pinctrl nodes were pointing to a different parent.
Fixing the same.
arch/arm/boot/dts/omap5-evm.dts | 46
Patch series adds omap5 evm mcspi nodes and pinctrl
data in omap5.dtsi and omap5-evm.dts files.
Felipe Balbi (1):
arm: dts: omap5: add SPI devices to OMAP5 DeviceTree file
Sourav Poddar (1):
arm: dts: omap5-evm: Add mcspi data
arch/arm/boot/dts/omap5-evm.dts | 46
From: Felipe Balbi ba...@ti.com
Add all 4 mcspi instances to omap5.dtsi file.
Signed-off-by: Felipe Balbi ba...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
arch/arm/boot/dts/omap5.dtsi | 40
1 files changed, 40 insertions(+), 0
Add mcspi node and pinmux data for omap5 mcspi controller.
Tested on omap5430 evm with 3.8-rc4 custom kernel.
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
Develops this on the patch[1] submitted in mainline
[1]: http://www.spinics.net/lists/kernel/msg1473163.html
arch/arm/boot/dts
rev0.11 at 400 kHz
[0.483398] Switching to clocksource 32k_counter
This happens because omap4 panda dts file is not adapted to use i2c through
pinctrl framework. Populating i2c pinctrl data to get rid of the error.
Tested on omap4460 panda with 3.8-rc4 kernel.
Signed-off-by: Sourav Poddar
This happens because omap5 dts file is not adapted to use i2c through pinctrl
framework. Populating i2c pinctrl data to get rid of the error.
Tested on omap5430 evm with 3.8-rc4 kernel.
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
Reported-by: Santosh Shilimkar santosh.shilim...@ti.com
This happens because omap4 dts file is not adapted to use i2c through pinctrl
framework. Populating i2c pinctrl data to get rid of the error.
Tested on omap4430 sdp with 3.8-rc4 kernel.
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
Reported-by: Santosh Shilimkar santosh.shilim...@ti.com
Greg's tty-next is not booting on 2420 based N800. The failure is
observed at serial init itself. The reason might be that n800 tries to
resume even though it is not suspended before.
Reported-by: Paul Walmsley p...@pwsan.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
This patch
...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
G, Manjunath Kondaiah (1):
Input: keypad: Add smsc ece1099 keypad driver
Sourav Poddar (3):
mfd: smsc: Add support for smsc gpio io/keypad driver
arm/dts: omap5-evm: Add keypad support
gpio: smscece: Add
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
Changes since v1:
- Use Kconfig option correctly
- Add regmap_config paramters
- Modify formatting of logs for devid
- Move read/write function to headed file as an inline
function.
Documentation/smsc_ece1099.txt | 56
ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Signed-off-by: G, Manjunath Kondaiah manj...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
Acked-by: Felipe Balbi ba...@ti.com
---
Changes since v1:
- Prevent the use of kfree since devm_kzalloc was used.
- Use devexit around
.
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
Changes since v1:
- use spaces around key comments
arch/arm/boot/dts/omap5-evm.dts | 95 +++
1 files changed, 95 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts
smsc can be used as an gpio io expander device also. So adding
support for configuring smsc pins as a gpio.
Cc: Benoit Cousson b-cous...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
Changes since v1
Add I2C data node in omap5 device tree file.
Tested on omap5430 evm.
Cc: Benoit Cousson b-cous...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Acked-by: Felipe Balbi ba...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
arch/arm/boot/dts/omap5
The following patch series add i2c support for omap5.
As well as enable I2C based devices like pressure and temperature
through device tree. Also add onchip keypad dts data.
Cc: Benoit Cousson b-cous...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Sourav
Add tmp102 temperature sensor data in omap5 evm dts file.
Tested on omap5430 evm with 3.5 custom kernel.
Cc: Benoit Cousson b-cous...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Acked-by: Felipe Balbi ba...@ti.com
Signed-off-by: Sourav Poddar sourav.pod
Add bmp085 pressure sensor data in omap5 evm dts file.
Tested on omap5430 evm with 3.5 custom kernel.
Cc: Benoit Cousson b-cous...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Acked-by: Felipe Balbi ba...@ti.com
Signed-off-by: Sourav Poddar sourav.pod
...@ti.com
Acked-by: Felipe Balbi ba...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
v1-v2
Add key names as comments
arch/arm/boot/dts/omap5-evm.dts | 12
arch/arm/boot/dts/omap5.dtsi|5 +
2 files changed, 17 insertions(+), 0 deletions(-)
diff --git a/arch/arm
Add bmp085 pressure sensor data in omap5 evm dts file.
Tested on omap5430 evm with 3.5 custom kernel.
Cc: Benoit Cousson b-cous...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Acked-by: Felipe Balbi ba...@ti.com
Signed-off-by: Sourav Poddar sourav.pod
...@ti.com
Acked-by: Felipe Balbi ba...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
v1-v2
Add key names as comments
arch/arm/boot/dts/omap5-evm.dts | 12
arch/arm/boot/dts/omap5.dtsi|5 +
2 files changed, 17 insertions(+), 0 deletions(-)
diff --git a/arch/arm
grant.lik...@secretlab.ca
Cc: Felipe Balbi ba...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
v6-v7
Add key name as a comment.
arch/arm/boot/dts/omap4-sdp.dts | 70 +++
arch/arm/boot/dts/omap4.dtsi|5 +++
2 files changed, 75 insertions
Add Documentation for tmp102 temperature sensor.
Cc: Benoit Cousson b-cous...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
Documentation/devicetree/bindings/hwmon/tmp102.txt | 11 +++
1 files
Add tmp102 temperature sensor data in omap5 evm dts file.
Tested on omap5430 evm with 3.5 custom kernel.
Cc: Benoit Cousson b-cous...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Acked-by: Felipe Balbi ba...@ti.com
Signed-off-by: Sourav Poddar sourav.pod
Add bmp085 pressure sensor data in omap5 evm dts file.
Tested on omap5430 evm with 3.5 custom kernel.
Cc: Benoit Cousson b-cous...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Acked-by: Felipe Balbi ba...@ti.com
Signed-off-by: Sourav Poddar sourav.pod
Add I2C data node in omap5 device tree file.
Tested on omap5430 evm.
Cc: Benoit Cousson b-cous...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Acked-by: Felipe Balbi ba...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
arch/arm/boot/dts/omap5
The following patch series add i2c support for omap5.
As well as enable I2C based devices like pressure and temperature
through device tree. Also add onchip keypad dts data.
Cc: Benoit Cousson b-cous...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Sourav
...@ti.com
Acked-by: Felipe Balbi ba...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
arch/arm/boot/dts/omap5-evm.dts | 12
arch/arm/boot/dts/omap5.dtsi|5 +
2 files changed, 17 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm
update tmp102 temperature sensor to also use device tree.
Cc: Benoit Cousson b-cous...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Acked-by: Felipe Balbi ba...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
drivers/hwmon/tmp102.c | 14
The following patch series add i2c support for omap5.
As well as enable I2C based devices like pressure and temperature
through device tree. Also add onchip keypad dts data.
Cc: Benoit Cousson b-cous...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Sourav
Add I2C data node in omap5 device tree file.
Tested on omap5430 sdp.
Cc: Benoit Cousson b-cous...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Acked-by: Felipe Balbi ba...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
arch/arm/boot/dts/omap5
Add bmp085 pressure sensor data in omap5 evm dts file.
Tested on omap5430 sdp with 3.5 custom kernel.
Cc: Benoit Cousson b-cous...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Acked-by: Felipe Balbi ba...@ti.com
Signed-off-by: Sourav Poddar sourav.pod
...@ti.com
Acked-by: Felipe Balbi ba...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
arch/arm/boot/dts/omap5-evm.dts | 12
arch/arm/boot/dts/omap5.dtsi|5 +
2 files changed, 17 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm
Add tmp102 temperature sensor data in omap5 evm dts file.
Tested on omap5430 sdp with 3.5 custom kernel.
Cc: Benoit Cousson b-cous...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Acked-by: Felipe Balbi ba...@ti.com
Signed-off-by: Sourav Poddar sourav.pod
Shilimkar santosh.shilim...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
drivers/misc/bmp085-i2c.c |7 ---
1 files changed, 0 insertions(+), 7 deletions(-)
diff --git a/drivers/misc/bmp085-i2c.c b/drivers/misc/bmp085-i2c.c
index 9943971..a4f33c9 100644
--- a/drivers/misc
...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
G, Manjunath Kondaiah (1):
Input: keypad: Add smsc ece1099 keypad driver
Sourav Poddar (3):
mfd: smsc: Add support for smsc gpio io/keypad driver
arm/dts: omap5-evm: Add keypad support
gpio: smscece: Add
ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Signed-off-by: G, Manjunath Kondaiah manj...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
drivers/input/keyboard/Kconfig | 11 +
drivers/input/keyboard/Makefile |1 +
drivers/input/keyboard
-off-by: Sourav Poddar sourav.pod...@ti.com
---
arch/arm/boot/dts/omap5-evm.dts | 95 +++
1 files changed, 95 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts
index 200c39a..6473983 100644
--- a/arch/arm
smsc can be used as an gpio io expander device also. So adding
support for configuring smsc pins as a gpio.
Cc: Benoit Cousson b-cous...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
drivers/gpio/Kconfig
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
Documentation/smsc_ece1099.txt | 56
drivers/mfd/Kconfig| 10 +++
drivers/mfd/Makefile |1 +
drivers/mfd/smsc-ece1099.c | 139
include/linux/mfd/smsc.h
...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
G, Manjunath Kondaiah (1):
Input: keypad: Add smsc ece1099 keypad driver
Sourav Poddar (3):
mfd: smsc: Add support for smsc gpio io/keypad driver
arm/dts: omap5-evm: Add keypad support
gpio: smscece: Add
Cc: Benoit Cousson b-cous...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Signed-off-by: G, Manjunath Kondaiah manj...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
Acked-by: Felipe Balbi ba...@ti.com
---
Changes since v2:
- Replace magic numbers
...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
Changes since v2:
- Change the cache type, max register assignment
- remove of_device_table, since i2c based device gets
probed according to i2c_device_id through dt.
- Modify the remove
Tested on omap5430 sdp with 3.66 custom kernel.
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
Changes since v2:
- Change the compatible string name.
arch/arm/boot/dts/omap5-evm.dts | 95 +++
1 files changed, 95 insertions(+), 0 deletions(-)
diff
smsc can be used as an gpio io expander device also. So adding
support for configuring smsc pins as a gpio.
Cc: Benoit Cousson b-cous...@ti.com
Cc: Felipe Balbi ba...@ti.com
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Signed-off-by: Sourav Poddar sourav.pod...@ti.com
---
Changes since v2
Hi,
On Tuesday 27 August 2013 11:45 AM, Stephen Rothwell wrote:
Hi Mark,
After merging the spi tree, today's linux-next build (x86_64 allmodconfig)
failed like this:
In file included from drivers/spi/spi-ti-qspi.c:19:0:
include/linux/module.h:87:32: error: '__mod_of_device_table' aliased to
On Monday 08 July 2013 08:02 PM, Felipe Balbi wrote:
Hi,
On Mon, Jul 08, 2013 at 07:12:59PM +0530, Sourav Poddar wrote:
+static inline unsigned long dra7xxx_readl(struct dra7xxx_qspi *qspi,
+ unsigned long reg)
+{
+ return readl(qspi-base + reg);
+}
+
+static inline void
1 - 100 of 386 matches
Mail list logo