From: Roger Tseng rogera...@realtek.com
Adding support of model RTL8411B. Since the model is similar to RTL8411,
differences are implemented in rtl8411.c.
Signed-off-by: Roger Tseng rogera...@realtek.com
---
drivers/mfd/rtl8411.c| 132 +++
From: Roger Tseng rogera...@realtek.com
Realtek USB memstick host driver provides memstick host support based on the
Realtek USB card reader MFD driver.
Signed-off-by: Roger Tseng rogera...@realtek.com
---
drivers/memstick/host/Kconfig | 10 +
drivers/memstick/host/Makefile | 1 +
From: Roger Tseng rogera...@realtek.com
Realtek USB SD/MMC host driver provides mmc host support based on the Realtek
USB card reader MFD driver.
Signed-off-by: Roger Tseng rogera...@realtek.com
---
drivers/mmc/host/Kconfig |7 +
drivers/mmc/host/Makefile |1 +
From: Roger Tseng rogera...@realtek.com
This patchset adds modules to support Realtek USB vendor specific class flash
card reader: one base module in MFD subsystem and two host modules in both mmc
and memstick subsystems. The architecture is similar to rtsx_pci.
This work is done primarily to
From: Roger Tseng rogera...@realtek.com
Realtek USB card reader provides a channel to transfer command or data to flash
memory cards. This driver exports host instances for mmc and memstick subsystems
and handles basic works.
Signed-off-by: Roger Tseng rogera...@realtek.com
---
From: Roger Tseng rogera...@realtek.com
This patchset adds modules to support Realtek USB vendor specific class flash
card reader: one base module in MFD subsystem and two host modules in both mmc
and memstick subsystems. The architecture is similar to rtsx_pci.
This work is done primarily to
From: Roger Tseng rogera...@realtek.com
Realtek USB SD/MMC host driver provides mmc host support based on the Realtek
USB card reader MFD driver.
Signed-off-by: Roger Tseng rogera...@realtek.com
---
drivers/mmc/host/Kconfig |7 +
drivers/mmc/host/Makefile |1 +
From: Roger Tseng rogera...@realtek.com
Realtek USB card reader provides a channel to transfer command or data to flash
memory cards. This driver exports host instances for mmc and memstick subsystems
and handles basic works.
Signed-off-by: Roger Tseng rogera...@realtek.com
---
From: Roger Tseng rogera...@realtek.com
Realtek USB memstick host driver provides memstick host support based on the
Realtek USB card reader MFD driver.
Signed-off-by: Roger Tseng rogera...@realtek.com
---
drivers/memstick/host/Kconfig | 10 +
drivers/memstick/host/Makefile | 1 +
From: Roger Tseng rogera...@realtek.com
In h_msb_read_page() in ms_block.c, flow never reaches case
MSB_RP_RECIVE_STATUS_REG. This causes error when MEMSTICK_INT_ERR is
encountered and status error bits are going to be examined, but the status will
never be copied back.
Fix it by transiting to
From: Roger Tseng rogera...@realtek.com
Realtek USB SD/MMC host driver provides mmc host support based on the Realtek
USB card reader MFD driver.
Signed-off-by: Roger Tseng rogera...@realtek.com
---
drivers/mmc/host/Kconfig |7 +
drivers/mmc/host/Makefile |1 +
From: Roger Tseng rogera...@realtek.com
Realtek USB memstick host driver provides memstick host support based on the
Realtek USB card reader MFD driver.
Signed-off-by: Roger Tseng rogera...@realtek.com
---
drivers/memstick/host/Kconfig | 10 +
drivers/memstick/host/Makefile | 1 +
From: Roger Tseng rogera...@realtek.com
This patchset adds modules to support Realtek USB vendor specific class flash
card reader: one base module in MFD subsystem and two host modules in both mmc
and memstick subsystems. The architecture is similar to rtsx_pci.
This work is done primarily to
From: Roger Tseng rogera...@realtek.com
Realtek USB card reader provides a channel to transfer command or data to flash
memory cards. This driver exports host instances for mmc and memstick subsystems
and handles basic works.
Signed-off-by: Roger Tseng rogera...@realtek.com
---
From: Roger Tseng rogera...@realtek.com
Fix two possible race condition generated by misuse of del_timer in
rtsx_usb_bulk_transfer_sglist() and uninitialized timers before mfd_add_devices
in rtsx_usb_probe().
Signed-off-by: Roger Tseng rogera...@realtek.com
---
drivers/mfd/rtsx_usb.c | 8
From: Roger Tseng rogera...@realtek.com
Explain why there is no need to have a symmetric LED turn-on in resume handler
while calling rtsx_usb_turn_off_led() in suspend handler.
Signed-off-by: Roger Tseng rogera...@realtek.com
---
drivers/mfd/rtsx_usb.c | 6 ++
1 file changed, 6
From: Roger Tseng rogera...@realtek.com
Realtek USB memstick host driver provides memstick host support based on the
Realtek USB card reader MFD driver.
Signed-off-by: Roger Tseng rogera...@realtek.com
---
drivers/memstick/host/Kconfig | 10 +
drivers/memstick/host/Makefile | 1 +
From: Roger Tseng rogera...@realtek.com
This patchset adds modules to support Realtek USB vendor specific class flash
card reader: one base module in MFD subsystem and two host modules in both mmc
and memstick subsystems. The architecture is similar to rtsx_pci.
This work is done primarily to
From: Roger Tseng rogera...@realtek.com
Realtek USB SD/MMC host driver provides mmc host support based on the Realtek
USB card reader MFD driver.
Signed-off-by: Roger Tseng rogera...@realtek.com
---
drivers/mmc/host/Kconfig |7 +
drivers/mmc/host/Makefile |1 +
From: Roger Tseng rogera...@realtek.com
Explain why there is no need to have a symmetric LED turn-on in resume handler
while calling rtsx_usb_turn_off_led() in suspend handler.
Signed-off-by: Roger Tseng rogera...@realtek.com
---
drivers/mfd/rtsx_usb.c | 6 ++
1 file changed, 6
From: Roger Tseng rogera...@realtek.com
This patchset adds modules to support Realtek USB vendor specific class flash
card reader: one base module in MFD subsystem and two host modules in both mmc
and memstick subsystems. The architecture is similar to rtsx_pci.
This work is done primarily to
From: Roger Tseng rogera...@realtek.com
Fix two possible race condition generated by misuse of del_timer in
rtsx_usb_bulk_transfer_sglist() and uninitialized timers before mfd_add_devices
in rtsx_usb_probe().
Signed-off-by: Roger Tseng rogera...@realtek.com
---
drivers/mfd/rtsx_usb.c | 8
From: Roger Tseng rogera...@realtek.com
Realtek USB memstick host driver provides memstick host support based on the
Realtek USB card reader MFD driver.
Signed-off-by: Roger Tseng rogera...@realtek.com
---
drivers/memstick/host/Kconfig | 10 +
drivers/memstick/host/Makefile | 1 +
From: Roger Tseng rogera...@realtek.com
Realtek USB SD/MMC host driver provides mmc host support based on the Realtek
USB card reader MFD driver.
Signed-off-by: Roger Tseng rogera...@realtek.com
Acked-by: Ulf Hansson ulf.hans...@linaro.org
---
drivers/mmc/host/Kconfig |7 +
From: Roger Tseng rogera...@realtek.com
This patchset adds modules to support Realtek USB vendor specific class flash
card reader: one base module in MFD subsystem and two host modules in both mmc
and memstick subsystems. The architecture is similar to rtsx_pci.
This work is done primarily to
From: Roger Tseng rogera...@realtek.com
Realtek USB card reader provides a channel to transfer command or data to flash
memory cards. This driver exports host instances for mmc and memstick subsystems
and handles basic works.
Signed-off-by: Roger Tseng rogera...@realtek.com
---
From: Roger Tseng rogera...@realtek.com
Realtek USB SD/MMC host driver provides mmc host support based on the Realtek
USB card reader MFD driver.
Signed-off-by: Roger Tseng rogera...@realtek.com
---
drivers/mmc/host/Kconfig |7 +
drivers/mmc/host/Makefile |1 +
From: Roger Tseng rogera...@realtek.com
Realtek USB memstick host driver provides memstick host support based on the
Realtek USB card reader MFD driver.
Signed-off-by: Roger Tseng rogera...@realtek.com
---
drivers/memstick/host/Kconfig | 10 +
drivers/memstick/host/Makefile | 1 +
From: Roger Tseng rogera...@realtek.com
Realtek USB memstick host driver provides memstick host support based on the
Realtek USB card reader MFD driver.
Signed-off-by: Roger Tseng rogera...@realtek.com
---
drivers/memstick/host/Kconfig | 10 +
drivers/memstick/host/Makefile | 1 +
From: Roger Tseng rogera...@realtek.com
This patchset adds modules to support Realtek USB vendor specific class flash
card reader: one base module in MFD subsystem and two host modules in both mmc
and memstick subsystems. The architecture is similar to rtsx_pci.
This work is done primarily to
From: Roger Tseng rogera...@realtek.com
Realtek USB card reader provides a channel to transfer command or data to flash
memory cards. This driver exports host instances for mmc and memstick subsystems
and handles basic works.
Signed-off-by: Roger Tseng rogera...@realtek.com
---
From: Roger Tseng rogera...@realtek.com
Realtek USB SD/MMC host driver provides mmc host support based on the Realtek
USB card reader MFD driver.
Signed-off-by: Roger Tseng rogera...@realtek.com
---
drivers/mmc/host/Kconfig |7 +
drivers/mmc/host/Makefile |1 +
From: Roger Tseng rogera...@realtek.com
(The original patch for PCI and USB was splitted here to make it easier for
stable tree.)
Current code erroneously fill the last byte of R2 response with an undefined
value. In addition, the controller actually 'offloads' the last byte
(CRC7, end bit)
From: Roger Tseng rogera...@realtek.com
Current code erroneously fill the last byte of R2 response with an undefined
value. In addition, the controller actually 'offloads' the last byte
(CRC7, end bit) while receiving R2 response and thus it's impossible to get the
actual value. This could cause
From: Roger Tseng rogera...@realtek.com
Current code erroneously fill the last byte of R2 response with an undefined
value. In addition, the controller actually 'offloads' the last byte
(CRC7, end bit) while receiving R2 response and thus it's impossible to get the
actual value. This could cause
From: Roger Tseng rogera...@realtek.com
Current code erroneously fill the last byte of R2 response with an undefined
value. In addition, it is impossible to obtain the real values since the
controller actually 'offloads' the last byte(CRC7, end bit) while receiving R2
response. This could cause
From: Roger Tseng
In h_msb_read_page() in ms_block.c, flow never reaches case
MSB_RP_RECIVE_STATUS_REG. This causes error when MEMSTICK_INT_ERR is
encountered and status error bits are going to be examined, but the status will
never be copied back.
Fix it by transiting to
From: Roger Tseng
Adding support of model RTL8411B. Since the model is similar to RTL8411,
differences are implemented in rtl8411.c.
Signed-off-by: Roger Tseng
---
drivers/mfd/rtl8411.c| 132 +++
drivers/mfd/rtsx_pcr.c | 5 ++
From: Roger Tseng
This patchset adds modules to support Realtek USB vendor specific class flash
card reader: one base module in MFD subsystem and two host modules in both mmc
and memstick subsystems. The architecture is similar to rtsx_pci.
This work is done primarily to replace the staging
From: Roger Tseng
Realtek USB SD/MMC host driver provides mmc host support based on the Realtek
USB card reader MFD driver.
Signed-off-by: Roger Tseng
---
drivers/mmc/host/Kconfig |7 +
drivers/mmc/host/Makefile |1 +
drivers/mmc/host/rtsx_usb_sdmmc.c | 1462
From: Roger Tseng
Realtek USB card reader provides a channel to transfer command or data to flash
memory cards. This driver exports host instances for mmc and memstick subsystems
and handles basic works.
Signed-off-by: Roger Tseng
---
drivers/mfd/Kconfig | 10 +
drivers/mfd/Makefile
From: Roger Tseng
Realtek USB memstick host driver provides memstick host support based on the
Realtek USB card reader MFD driver.
Signed-off-by: Roger Tseng
---
drivers/memstick/host/Kconfig | 10 +
drivers/memstick/host/Makefile | 1 +
drivers/memstick/host/rtsx_usb_ms.c | 836
From: Roger Tseng
Realtek USB memstick host driver provides memstick host support based on the
Realtek USB card reader MFD driver.
Signed-off-by: Roger Tseng
---
drivers/memstick/host/Kconfig | 10 +
drivers/memstick/host/Makefile | 1 +
drivers/memstick/host/rtsx_usb_ms.c | 855
From: Roger Tseng
Realtek USB SD/MMC host driver provides mmc host support based on the Realtek
USB card reader MFD driver.
Signed-off-by: Roger Tseng
---
drivers/mmc/host/Kconfig |7 +
drivers/mmc/host/Makefile |1 +
drivers/mmc/host/rtsx_usb_sdmmc.c | 1509
From: Roger Tseng
This patchset adds modules to support Realtek USB vendor specific class flash
card reader: one base module in MFD subsystem and two host modules in both mmc
and memstick subsystems. The architecture is similar to rtsx_pci.
This work is done primarily to replace the staging
From: Roger Tseng
Realtek USB card reader provides a channel to transfer command or data to flash
memory cards. This driver exports host instances for mmc and memstick subsystems
and handles basic works.
Signed-off-by: Roger Tseng
---
drivers/mfd/Kconfig | 10 +
drivers/mfd/Makefile
From: Roger Tseng
Realtek USB memstick host driver provides memstick host support based on the
Realtek USB card reader MFD driver.
Signed-off-by: Roger Tseng
---
drivers/memstick/host/Kconfig | 10 +
drivers/memstick/host/Makefile | 1 +
drivers/memstick/host/rtsx_usb_ms.c | 849
From: Roger Tseng
This patchset adds modules to support Realtek USB vendor specific class flash
card reader: one base module in MFD subsystem and two host modules in both mmc
and memstick subsystems. The architecture is similar to rtsx_pci.
This work is done primarily to replace the staging
From: Roger Tseng
Realtek USB card reader provides a channel to transfer command or data to flash
memory cards. This driver exports host instances for mmc and memstick subsystems
and handles basic works.
Signed-off-by: Roger Tseng
---
drivers/mfd/Kconfig | 10 +
drivers/mfd/Makefile
From: Roger Tseng
Realtek USB SD/MMC host driver provides mmc host support based on the Realtek
USB card reader MFD driver.
Signed-off-by: Roger Tseng
---
drivers/mmc/host/Kconfig |7 +
drivers/mmc/host/Makefile |1 +
drivers/mmc/host/rtsx_usb_sdmmc.c | 1500
From: Roger Tseng
This patchset adds modules to support Realtek USB vendor specific class flash
card reader: one base module in MFD subsystem and two host modules in both mmc
and memstick subsystems. The architecture is similar to rtsx_pci.
This work is done primarily to replace the staging
From: Roger Tseng
Realtek USB card reader provides a channel to transfer command or data to flash
memory cards. This driver exports host instances for mmc and memstick subsystems
and handles basic works.
Signed-off-by: Roger Tseng
---
drivers/mfd/Kconfig | 10 +
drivers/mfd/Makefile
From: Roger Tseng
Realtek USB SD/MMC host driver provides mmc host support based on the Realtek
USB card reader MFD driver.
Signed-off-by: Roger Tseng
---
drivers/mmc/host/Kconfig |7 +
drivers/mmc/host/Makefile |1 +
drivers/mmc/host/rtsx_usb_sdmmc.c | 1511
From: Roger Tseng
Realtek USB memstick host driver provides memstick host support based on the
Realtek USB card reader MFD driver.
Signed-off-by: Roger Tseng
---
drivers/memstick/host/Kconfig | 10 +
drivers/memstick/host/Makefile | 1 +
drivers/memstick/host/rtsx_usb_ms.c | 856
From: Roger Tseng
Realtek USB SD/MMC host driver provides mmc host support based on the Realtek
USB card reader MFD driver.
Signed-off-by: Roger Tseng
---
drivers/mmc/host/Kconfig |7 +
drivers/mmc/host/Makefile |1 +
drivers/mmc/host/rtsx_usb_sdmmc.c | 1462
From: Roger Tseng
Realtek USB memstick host driver provides memstick host support based on the
Realtek USB card reader MFD driver.
Signed-off-by: Roger Tseng
---
drivers/memstick/host/Kconfig | 10 +
drivers/memstick/host/Makefile | 1 +
drivers/memstick/host/rtsx_usb_ms.c | 839
From: Roger Tseng
This patchset adds modules to support Realtek USB vendor specific class flash
card reader: one base module in MFD subsystem and two host modules in both mmc
and memstick subsystems. The architecture is similar to rtsx_pci.
This work is done primarily to replace the staging
From: Roger Tseng
Realtek USB card reader provides a channel to transfer command or data to flash
memory cards. This driver exports host instances for mmc and memstick subsystems
and handles basic works.
Signed-off-by: Roger Tseng
---
drivers/mfd/Kconfig | 10 +
drivers/mfd/Makefile
From: Roger Tseng
(The original patch for PCI and USB was splitted here to make it easier for
stable tree.)
Current code erroneously fill the last byte of R2 response with an undefined
value. In addition, the controller actually 'offloads' the last byte
(CRC7, end bit) while receiving R2
From: Roger Tseng
Current code erroneously fill the last byte of R2 response with an undefined
value. In addition, the controller actually 'offloads' the last byte
(CRC7, end bit) while receiving R2 response and thus it's impossible to get the
actual value. This could cause mmc stack to obtain
From: Roger Tseng
Current code erroneously fill the last byte of R2 response with an undefined
value. In addition, the controller actually 'offloads' the last byte
(CRC7, end bit) while receiving R2 response and thus it's impossible to get the
actual value. This could cause mmc stack to obtain
From: Roger Tseng
Current code erroneously fill the last byte of R2 response with an undefined
value. In addition, it is impossible to obtain the real values since the
controller actually 'offloads' the last byte(CRC7, end bit) while receiving R2
response. This could cause mmc stack to obtain
From: Roger Tseng
Fix two possible race condition generated by misuse of del_timer in
rtsx_usb_bulk_transfer_sglist() and uninitialized timers before mfd_add_devices
in rtsx_usb_probe().
Signed-off-by: Roger Tseng
---
drivers/mfd/rtsx_usb.c | 8
1 file changed, 4 insertions(+), 4
From: Roger Tseng
Explain why there is no need to have a symmetric LED turn-on in resume handler
while calling rtsx_usb_turn_off_led() in suspend handler.
Signed-off-by: Roger Tseng
---
drivers/mfd/rtsx_usb.c | 6 ++
1 file changed, 6 insertions(+)
diff --git a/drivers/mfd/rtsx_usb.c
From: Roger Tseng
Realtek USB memstick host driver provides memstick host support based on the
Realtek USB card reader MFD driver.
Signed-off-by: Roger Tseng
---
drivers/memstick/host/Kconfig | 10 +
drivers/memstick/host/Makefile | 1 +
drivers/memstick/host/rtsx_usb_ms.c | 839
From: Roger Tseng
This patchset adds modules to support Realtek USB vendor specific class flash
card reader: one base module in MFD subsystem and two host modules in both mmc
and memstick subsystems. The architecture is similar to rtsx_pci.
This work is done primarily to replace the staging
From: Roger Tseng
Realtek USB SD/MMC host driver provides mmc host support based on the Realtek
USB card reader MFD driver.
Signed-off-by: Roger Tseng
---
drivers/mmc/host/Kconfig |7 +
drivers/mmc/host/Makefile |1 +
drivers/mmc/host/rtsx_usb_sdmmc.c | 1462
From: Roger Tseng
Explain why there is no need to have a symmetric LED turn-on in resume handler
while calling rtsx_usb_turn_off_led() in suspend handler.
Signed-off-by: Roger Tseng
---
drivers/mfd/rtsx_usb.c | 6 ++
1 file changed, 6 insertions(+)
diff --git a/drivers/mfd/rtsx_usb.c
From: Roger Tseng
This patchset adds modules to support Realtek USB vendor specific class flash
card reader: one base module in MFD subsystem and two host modules in both mmc
and memstick subsystems. The architecture is similar to rtsx_pci.
This work is done primarily to replace the staging
From: Roger Tseng
Fix two possible race condition generated by misuse of del_timer in
rtsx_usb_bulk_transfer_sglist() and uninitialized timers before mfd_add_devices
in rtsx_usb_probe().
Signed-off-by: Roger Tseng
---
drivers/mfd/rtsx_usb.c | 8
1 file changed, 4 insertions(+), 4
From: Roger Tseng
Realtek USB memstick host driver provides memstick host support based on the
Realtek USB card reader MFD driver.
Signed-off-by: Roger Tseng
---
drivers/memstick/host/Kconfig | 10 +
drivers/memstick/host/Makefile | 1 +
drivers/memstick/host/rtsx_usb_ms.c | 839
From: Roger Tseng
Realtek USB SD/MMC host driver provides mmc host support based on the Realtek
USB card reader MFD driver.
Signed-off-by: Roger Tseng
Acked-by: Ulf Hansson
---
drivers/mmc/host/Kconfig |7 +
drivers/mmc/host/Makefile |1 +
72 matches
Mail list logo
