On 8/24/18 6:26 PM, Vinson Lee wrote:
Include linux/in6.h for struct in6_addr.
/usr/include/linux/rds.h:156:18: error: field ‘laddr’ has incomplete type
struct in6_addr laddr;
^
/usr/include/linux/rds.h:157:18: error: field ‘faddr’ has incomplete type
struct
On 9/23/18 3:14 PM, Colin King wrote:
From: Colin Ian King
Trivial fix to spelling mistake in dev_err messages and comments
Signed-off-by: Colin Ian King
---
Thanks. I will fix this up.
Regards,
Santosh
On 4/28/19 9:44 PM, Keerthy wrote:
Currently there is no way to distinguish if the SoC entered DS0
mode or the RTC only mode. Hence add a print before entering
the RTC only mode.
Signed-off-by: Keerthy
---
Acked-by: Santosh Shilimkar
Tony, Am assuming you will queue this up ?
On 4/11/19 8:09 PM, Masahiro Yamada wrote:
is only generated and included
by drivers/memory/, so it does not need to reside in the globally
visible include/generated/.
Signed-off-by: Masahiro Yamada
---
I will apply this to linux-kbuild since this depends on
another patch there.
Sure.
On 7/6/18 1:11 AM, Johannes Thumshirn wrote:
On Thu, Jul 05, 2018 at 09:09:44AM -0700, Santosh Shilimkar wrote:
OK. we will look into it if an interim fix can be made
Thanks a lot.
Intermediate fix is posted here [1]
Regards,
Santosh
[1] https://patchwork.ozlabs.org/patch/949010/
On 7/6/18 5:36 AM, Arnd Bergmann wrote:
Everyone gets these #ifdefs wrong, leading to another warning here:
drivers/soc/ti/wkup_m3_ipc.c:547:12: error: 'wkup_m3_ipc_resume' defined but
not used [-Werror=unused-function]
static int wkup_m3_ipc_resume(struct device *dev)
On 11/17/14 12:37 PM, Arnd Bergmann wrote:
On Monday 17 November 2014 11:14:16 Kevin Hilman wrote:
So, The Keystone 2 Generic PM Controller is just a proxy PM layer here between
device and Generic clock manipulation PM callbacks.
It fills per-device clock list when device is attached to GPD
On 3/19/15 10:25 AM, grygorii.stras...@linaro.org wrote:
From: Grygorii Strashko
Convert omap_gpio_is_input() to use GPIO offset instead of mask and,
in such way, make code simpler and remove few lines of code.
Signed-off-by: Grygorii Strashko
---
Acked-by: Santosh Shilimkar
--
To
On 3/19/15 10:25 AM, grygorii.stras...@linaro.org wrote:
From: Grygorii Strashko
Both functions omap_set_gpio_dataout_reg() and
omap_set_gpio_dataout_mask() accept GPIO offset
as 'gpio' input parameter, so rename it to 'offset' and
drop usage of GPIO_BIT() macro.
Signed-off-by: Grygorii
On 3/19/15 10:25 AM, grygorii.stras...@linaro.org wrote:
From: Grygorii Strashko
Convert GPIO IRQ functions to use GPIO offset instead of system
GPIO numbers. This allows to drop unneeded conversations between
system GPIO <-> GPIO offset which are done in many places and
many times.
It is safe
On 3/19/15 10:25 AM, grygorii.stras...@linaro.org wrote:
From: Grygorii Strashko
Now OMAP GPIO driver prepared for GPIO_BIT() macro removing.
Do it ;)
Signed-off-by: Grygorii Strashko
---
Thanks for the cleanup Grygorii.
Acked-by: Santosh Shilimkar
--
To unsubscribe from this list: send
On 4/5/15 5:06 AM, Julia Lawall wrote:
Return a negative error code on failure.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
//
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret =
On 8/4/15 12:30 PM, Murali Karicheri wrote:
On 08/04/2015 03:14 PM, santosh shilimkar wrote:
On 8/4/2015 9:36 AM, Murali Karicheri wrote:
Currently there is no general documentation on Keystone SoCs in the
Linux Documentation folder of the source tree. This patch adds some
essential
On 7/16/15 2:51 PM, Murali Karicheri wrote:
Currently PCIe DT bindings are broken. PCIe driver can't function
without having a SerDes driver that provide the phy configuration.
On K2E EVM, this causes problem since the EVM has Marvell SATA
controller present and with default values in the SerDes
On 7/31/15 1:30 PM, Olof Johansson wrote:
On Fri, Jul 31, 2015 at 08:30:03AM -0700, santosh shilimkar wrote:
Olof,
As discussed patch 1/2 is already made it via clock tree. Please
pick the subject fix for your upcoming fixes pull request.
On 5/29/2015 9:04 AM, Murali Karicheri wrote:
All of
On 8/3/15 11:22 AM, Murali Karicheri wrote:
On 08/03/2015 02:11 PM, Murali Karicheri wrote:
Currently the MDIO clock is pointing to clkpa instead of clkcpgmac.
MDIO is part of the ethss and the clock should be clkcpgmac.
Signed-off-by: Murali Karicheri
---
arch/arm/boot/dts/keystone.dtsi |
On 8/3/15 11:50 AM, Murali Karicheri wrote:
On 08/03/2015 02:30 PM, santosh.shilim...@oracle.com wrote:
On 8/3/15 11:22 AM, Murali Karicheri wrote:
On 08/03/2015 02:11 PM, Murali Karicheri wrote:
Currently the MDIO clock is pointing to clkpa instead of clkcpgmac.
MDIO is part of the ethss
On 8/27/15 8:51 AM, Murali Karicheri wrote:
When using accumulator queue for rx side for network driver, following
warning is seen when doing a reboot command from Linux console. This
is because, affinity value is not reset before calling free_irq(). This
patch fixes this.
Deconfiguring network
On 8/27/15 11:34 AM, Nathan Lynch wrote:
On 08/27/2015 01:23 PM, Murali Karicheri wrote:
On 08/27/2015 12:43 PM, Nathan Lynch wrote:
On 08/27/2015 10:51 AM, Murali Karicheri wrote:
When using accumulator queue for rx side for network driver, following
warning is seen when doing a reboot
On 9/1/15 1:28 PM, WingMan Kwok wrote:
Network subsystem NetCP in Keystone-2 devices includes some HW blocks
that are memory mapped to ranges outside that of the NetCP itself.
Thus address space of a child node of the NetCP node needs to be
mapped 1:1 onto the parent address space. Hence empty
On 9/3/15 7:26 AM, Tony Lindgren wrote:
* santosh shilimkar [150902 08:55]:
I suspected the same. I know back then we started with SERDES code
with NETCP but as you already know, its a separate block which
is needed for NIC card to work. Its more of phy and hence its
having different address
On 9/3/15 1:24 PM, Sowmini Varadhan wrote:
Only return a conn if the rds_conn_net(conn) matches the struct
net passed to rds_conn_lookup().
Fixes: 467fa15356ac ("RDS-TCP: Support multiple RDS-TCP listen endpoints,
one per netns.")
Signed-off-by: Sowmini Varadhan
---
Acked-by:
On 9/4/15 12:44 PM, Sasha Levin wrote:
On 09/04/2015 01:32 PM, santosh shilimkar wrote:
Sasha,
On 9/4/2015 9:43 AM, Sasha Levin wrote:
There was no verification that an underlying transport exists when creating
a connection, this would cause dereferencing a NULL ptr.
Signed-off-by: Sasha
On 9/4/15 5:46 PM, Murali Karicheri wrote:
To help the user, print the PDSP file name as part of
knav_queue_load_pdsp(). This will be useful for users to know what
version of the firmware is loaded to PDSP. Also update the
document for the location of the QMSS accumulator PDSP firmware.
On 8/14/15 2:53 PM, Murali Karicheri wrote:
On 08/14/2015 11:14 AM, santosh shilimkar wrote:
On 8/14/2015 7:09 AM, Russell King - ARM Linux wrote:
On Fri, Aug 14, 2015 at 10:04:41AM -0400, Murali Karicheri wrote:
On 08/11/2015 03:13 PM, Murali Karicheri wrote:
Currently on some devices, an
Murali,
On 8/17/15 3:12 PM, Murali Karicheri wrote:
On 08/14/2015 05:56 PM, Russell King - ARM Linux wrote:
On Fri, Aug 14, 2015 at 05:53:00PM -0400, Murali Karicheri wrote:
We have spend some time already to debug the root cause. Do you have
idea on
how this was hunted down on OMAP that we
On 9/9/15 9:38 AM, Murali Karicheri wrote:
On 09/04/2015 11:53 PM, santosh.shilim...@oracle.com wrote:
On 9/4/15 5:46 PM, Murali Karicheri wrote:
To help the user, print the PDSP file name as part of
knav_queue_load_pdsp(). This will be useful for users to know what
version of the firmware
On 8/10/15 2:51 AM, Daniel Lezcano wrote:
From: Viresh Kumar
Migrate keystone driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for
On 8/22/15 5:11 PM, Julia Lawall wrote:
Return a negative error code on failure.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
//
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret =
On 7/10/15 3:45 PM, Stephen Boyd wrote:
This file doesn't use the clk provider APIs. Remove the include.
Cc: Nishanth Menon
Cc: Sekhar Nori
Cc: Santosh Shilimkar
Signed-off-by: Stephen Boyd
---
Please ack if you want this to go through clk-tree.
Sure.
Acked-by: Santosh Shilimkar
On 11/10/14 7:13 AM, Grygorii Strashko wrote:
Hi Santosh,
On 11/10/2014 04:59 PM, Grygorii Strashko wrote:
Hi Santosh, Kevin,
This series switches Keystone 2 PM code to use Generic PM domains
instead of PM clock domains because of the lack of DT support
for the last.
It will finally allow to
On 6/29/15 11:43 AM, Vitaly Andrianov wrote:
On 06/29/2015 01:52 PM, Mark Rutland wrote:
On Mon, Jun 29, 2015 at 06:52:32PM +0100, Vitaly Andrianov wrote:
This commit add cpu_die implementation
Signed-off-by: Vitaly Andrianov
---
The discussion of the "keystone: psci: adds cpu_die
On 6/20/15 1:46 PM, Richard Weinberger wrote:
Am 04.05.2015 um 20:44 schrieb Richard Weinberger:
Am 04.01.2015 um 16:48 schrieb Richard Weinberger:
At least on UML this identifiers clash with register names.
Use something less generic than Rx, Cx and Cx.
CC lib//jedec_ddr_data.o
In
On 5/7/15 5:37 PM, Suravee Suthikulpanit wrote:
Currently, device drivers, which support both OF and ACPI,
need to call two separate APIs, of_dma_is_coherent() and
acpi_dma_is_coherent()) to determine device coherency attribute.
This patch simplifies this process by introducing a new device
On 1/2/15 9:43 AM, Nishanth Menon wrote:
Hi,
OMAP4 and AM437x ROM code provides services to program PL310's latency
registers and AM437x provides service for programming Address filter
registers.
Provide support in the kernel for the same.
V2 of the series contains documentation update and a
On 1/5/15 2:19 PM, Paul Walmsley wrote:
+ Santosh
Hi Lokesh
On Mon, 5 Jan 2015, Lokesh Vutla wrote:
On Saturday 03 January 2015 02:40 AM, Paul Walmsley wrote:
On Thu, 18 Dec 2014, Roger Quadros wrote:
On 18/12/14 17:49, Roger Quadros wrote:
There are quite a few hwmods that don't have
On 1/29/15 12:37 PM, Murali Karicheri wrote:
Currently configuring qmss and dma as dynamic module creates three .ko
files. knav_qmss_acc.ko and knav_qmss_queue.ko both can't be insmod
because of circular dependency. So combine these two into one module
by changing the makefile.
Signed-off-by:
On 2/20/17 7:18 PM, David Miller wrote:
From: Santosh Shilimkar
Date: Mon, 20 Feb 2017 14:16:53 -0800
Use "__uX/__sX" kernel types rather than current uint*/int* for
entire file.
Reviewed-by: Sowmini Varadhan
Signed-off-by: Santosh Shilimkar
---
v1->v2:
As suggested by David Miller,
On 2/21/17 6:29 AM, David Laight wrote:
The entire file should use the proper "__uX" kernel types
rather than the uint* ones.
The uint* ones are part of the C standard :-)
Should have been uint*_t :-)
Hi Arnd, Olof,
On 3/29/17 5:32 AM, Sekhar Nori wrote:
From: Murali Karicheri
Ethernet networking on K2L has been broken since v4.11-rc1. This was
caused by commit 32a34441a9bd ("ARM: keystone: dts: fix netcp clocks
and add names"). This commit inadvertently moves on-chip static RAM
clock to
On 1/11/17 6:28 PM, santosh.shilim...@oracle.com wrote:
On 1/11/17 5:48 PM, Suman Anna wrote:
Hi Santosh,
This is a slightly updated patch series for the reset controller nodes
for
TI Keystone2 SoCs. The only change is to rename the reset controller
nodes
from "psc-reset-controller&quo
On 1/4/17 2:06 PM, Dave Gerlach wrote:
Santosh,
On 01/04/2017 03:54 PM, Santosh Shilimkar wrote:
On 1/4/2017 12:55 PM, Dave Gerlach wrote:
Hi,
This is v3 of the series to add support for TI-SCI Generic PM Domains.
Previous versions can be found here:
v2:
Hi Suman,
On 9/7/16 9:25 AM, Santosh Shilimkar wrote:
On 9/7/2016 9:22 AM, Suman Anna wrote:
Hi Santosh,
On 09/07/2016 11:11 AM, Santosh Shilimkar wrote:
Hi Suman,
On 9/1/2016 3:58 PM, Suman Anna wrote:
Hi,
The Keystone 2 family of SoCs have an on-chip RAM called the
Multicore Shared
On 1/6/17 1:57 PM, Suman Anna wrote:
Hi,
The Keystone 2 family of SoCs have an on-chip RAM called the
Multicore Shared Memory (MSM) RAM. This RAM is accessible through
the Multicore Shared Memory Controller (MSMC). This series represents
these on-chip RAMs as sram nodes so that the memory
On 3/14/17 2:11 PM, Arnd Bergmann wrote:
gcc-7 notices that the length we pass to strncat is wrong:
drivers/firmware/ti_sci.c: In function 'ti_sci_probe':
drivers/firmware/ti_sci.c:204:32: error: specified bound 50 equals the size of
the destination [-Werror=stringop-overflow=]
Instead of the
On 4/20/17 10:53 PM, Arnd Bergmann wrote:
On Fri, Apr 21, 2017 at 2:54 AM, Stephen Rothwell wrote:
Hi all,
Today's linux-next merge of the pm tree got a conflict in:
include/dt-bindings/genpd/k2g.h
between commit:
7cc119f29b19 ("dt-bindings: Add TI SCI PM Domains")
from the arm-soc
On 4/21/17 2:31 AM, Arnd Bergmann wrote:
On Fri, Apr 21, 2017 at 8:39 AM, santosh.shilim...@oracle.com
wrote:
On 4/20/17 10:53 PM, Arnd Bergmann wrote:
On Fri, Apr 21, 2017 at 2:54 AM, Stephen Rothwell
wrote:
Hi all,
Today's linux-next merge of the pm tree got a conflict in:
include
On 5/10/17 9:08 AM, Santosh Shilimkar wrote:
On 4/24/2017 1:22 PM, Franklin S Cooper Jr wrote:
This patchset adds support for new K2G Industrial Communication Engine
evm. For now only a bare minimal dts which will allow ram boot.
Additional
peripherals will be added when base K2G SoC patches
On 10/30/16 2:06 PM, Sagi Grimberg wrote:
from "InfiBand Architecture Specifications Volume 1":
A QP is said to have a stale connection when only one side has
connection information. A stale connection may result if the remote CM
had dropped the connection and sent a DREQ but the DREQ was
On 6/14/17 12:07 AM, Tero Kristo wrote:
On 13/06/17 23:32, Santosh Shilimkar wrote:
[...]
Sorry Dave I missed to pick this one in pull request for 4.13. Will
pick this
one along with what Suman and Tero have been working for following merge
window. Thanks for reminding about this one.
I
On 1/11/17 5:48 PM, Suman Anna wrote:
Hi Santosh,
This is a slightly updated patch series for the reset controller nodes for
TI Keystone2 SoCs. The only change is to rename the reset controller nodes
from "psc-reset-controller" to just "reset-controller" following Rob Herring's
comment on the
On 1/4/17 2:36 AM, Bartosz Golaszewski wrote:
TI aemif driver creates its own subnodes of the device tree in order
to guarantee that all child devices are probed after the AEMIF timing
parameters are configured.
Some devices (e.g. da850) use struct of_dev_auxdata for clock lookup
but nodes
On 1/12/17 11:07 AM, Bart Van Assche wrote:
Signed-off-by: Bart Van Assche
Reviewed-by: Christoph Hellwig
Reviewed-by: Sagi Grimberg
Cc: Santosh Shilimkar
Acked-by: Santosh Shilimkar
On 1/10/17 4:56 PM, Bart Van Assche wrote:
Signed-off-by: Bart Van Assche
Acked-by: Santosh Shilimkar
On 1/10/17 4:56 PM, Bart Van Assche wrote:
Hello Doug,
As you know there are two sets of DMA mapping operations in the Linux
kernel:
- One set of DMA mapping operations that is used by most drivers.
- Another set of DMA mapping operations that is only used by the RDMA
drivers.
Having two sets
On 9/4/16 11:23 AM, Leon Romanovsky wrote:
On Sun, Sep 04, 2016 at 05:57:20PM +0200, Christophe JAILLET wrote:
Le 04/09/2016 à 14:20, Leon Romanovsky a écrit :
On Sat, Sep 03, 2016 at 07:33:29AM +0200, Christophe JAILLET wrote:
Calling 'list_splice' followed by 'INIT_LIST_HEAD' is equivalent
Hi Franklin,
On 3/30/17 8:29 AM, Franklin S Cooper Jr wrote:
This patchset adds support for new K2G Industrial Communication Engine
evm. For now only a bare minimal dts which will allow ram boot. Additional
peripherals will be added when base K2G SoC patches are upstreamed allowing
peripherals
Hi Dave,
On 3/16/17 11:31 AM, Dave Gerlach wrote:
Santosh,
On 03/12/2017 12:02 PM, Rafael J. Wysocki wrote:
[...]
I did not update the "power-domain" binding document because in regards to
#power-domain-cells it already states "can be any value as specified by device
tree binding
On 4/3/17 7:47 PM, Dave Gerlach wrote:
Hi,
This is v5 of the series to add support for TI-SCI Generic PM Domains with
all ACKs in place and ready for Santosh to merge.
Applied to 'for_4.12/soc-pmdomain' and should show up in next. Based on
what arm-soc folks say about the single pull request,
On 3/7/17 2:22 AM, Dave Gerlach wrote:
K2G will use a different power domain driver than the rest of the
keystone family in order to make use of the TI SCI protocol so prevent
the standard keystone pm_domain code from registering itself in
preparation for a new driver.
Signed-off-by: Lokesh
On 3/7/17 2:22 AM, Dave Gerlach wrote:
Introduce a ti_sci_pm_domains driver to act as a generic pm domain
provider to allow each device to attach and associate it's ti-sci-id so
that it can be controlled through the TI SCI protocol.
This driver implements a simple genpd where each device node
On 3/7/17 2:22 AM, Dave Gerlach wrote:
Add a generic power domain implementation, TI SCI PM Domains, that
will hook into the genpd framework and allow the TI SCI protocol to
control device power states.
Also, provide macros representing each device index as understood
by TI SCI to be used in
On 11/4/16 11:42 AM, Andrew F. Davis wrote:
Hello all,
This series adds a reset controller driver that uses the TI SCI
protocol to manage resets.
The TI SCI protocol is used to communicate with power management
controllers used by some SoCs. These controllers manage the various
power
On 10/3/15 4:44 PM, Nishanth Menon wrote:
On 10/02/2015 11:09 AM, santosh shilimkar wrote:
Nishant,
On 9/25/2015 10:38 AM, Nishanth Menon wrote:
On 09/25/2015 11:15 AM, santosh shilimkar wrote:
9/25/2015 9:01 AM, Nishanth Menon wrote:
[..]
Please refresh the series commit messages based
On 10/4/15 4:36 AM, Greg Kroah-Hartman wrote:
On Tue, Sep 29, 2015 at 10:40:17AM -0700, santosh shilimkar wrote:
+Greg, arm-sock folks
On 9/17/2015 10:56 AM, santosh shilimkar wrote:
On 9/17/2015 10:41 AM, Luis de Bethencourt wrote:
Hello,
These patches add the missing MODULE_DEVICE_TABLE()
On 10/4/15 9:23 AM, Luis de Bethencourt wrote:
Hi,
Resending this patch series as requested by Greg. So he can have them in his
queue for picking up.
https://lkml.org/lkml/2015/10/4/76
These patches add the missing MODULE_DEVICE_TABLE() for OF to export
the information so modules have the
On 10/7/15 2:16 AM, David Miller wrote:
From: Santosh Shilimkar
Date: Mon, 5 Oct 2015 10:56:23 -0700
[v3]
Updated patch "[PATCH v2 05/14] RDS: defer the over_batch work to
send worker" as per David Miller's comment [4] to avoid the magic
value usage. Patch now makes use of already available
On 10/7/15 10:04 AM, Nishanth Menon wrote:
Add missing commits for the suggest compatible flags in dt binding.
Fixes: 8841cbf666d6 ("Documentation: dt: keystone: provide SoC specific compatible
flags")
Reported-by: Suman Anna
Signed-off-by: Nishanth Menon
---
This could be squashed since
On 5/15/16 2:18 PM, Santosh Shilimkar wrote:
Hi Paul,
I was asking Sasha about [1] since other folks in Oracle
also stumbled upon similar RCU stalls with v4.1 kernel in
different workloads. I was reported similar issue with
RDS as well and looking at [1], [2], [3] and [4], thought
of reaching
On 5/16/16 5:58 PM, Paul E. McKenney wrote:
On Mon, May 16, 2016 at 12:49:41PM -0700, Santosh Shilimkar wrote:
On 5/16/2016 10:34 AM, Paul E. McKenney wrote:
On Mon, May 16, 2016 at 09:33:57AM -0700, Santosh Shilimkar wrote:
[...]
Are you running CONFIG_NO_HZ_FULL=y? If so, the problem
On 10/21/15 5:57 AM, WingMan Kwok wrote:
This patch adds the serdes phy driver dts bindings
for the keystone PCIe host driver.
Signed-off-by: WingMan Kwok
---
Keep me posted when driver gets merged. I will then
pick this up.
Regards,
Santosh
--
To unsubscribe from this list: send the line
On 10/14/15 2:15 PM, Santosh Shilimkar wrote:
From: Santosh Shilimkar
To further improve the RDS connection scalabilty on massive systems
where number of sockets grows into tens of thousands of sockets, there
is a need of larger bind hashtable. Pre-allocated 8K or 16K table is
not very
On 10/11/15 1:46 PM, Sowmini Varadhan wrote:
The IP address passed to rds_bind() should be vetted by the
transport's ->laddr_check() for a previously bound transport.
This needs to be done to avoid cases where, for example,
the application has asked for an IB transport,
but the IP address
On 10/11/15 1:49 PM, Sowmini Varadhan wrote:
Consider the following "duelling syn" sequence between two peers A and B:
A B
SYN1 -->
<-- SYN2
SYN2ACK -->
Note that the SYN/ACK has already been sent out
On 11/27/15 11:47 AM, Grygorii Strashko wrote:
Now the System stall is observed on TI AM437x based board
(am437x-gp-evm) during resuming from System suspend when ARM Global
timer is selected as clocksource device (CPUIdle not enabled) - SysRq are
working,
but nothing else.
The reason of stall
On 11/20/15 9:04 PM, Michal Morawiec wrote:
On Fri, Nov 20, 2015 at 03:47:38PM -0800, santosh shilimkar wrote:
On 11/20/2015 3:39 PM, Michal Morawiec wrote:
Configure linking RAM for both queue managers also in case
when only linking RAM 0 is specified in device tree.
why ?
If both queue
On 4/7/16 10:01 AM, Nishanth Menon wrote:
Hi Santosh,
On Wed, Mar 16, 2016 at 10:43 AM, santosh shilimkar
wrote:
On 3/16/2016 7:39 AM, Nishanth Menon wrote:
As reported in [1], rename the k2* dts files to keystone-* files
this will force consistency throughout.
Script for the same (and
On 7/17/16 7:00 PM, Peter Chen wrote:
of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.
Signed-off-by: Peter Chen
---
Changes for v2:
- %s/of_put_node/of_node_put
drivers/memory/emif.c | 2 ++
1 file changed, 2 insertions(+)
I will
On 8/6/16 11:52 PM, Greg Kroah-Hartman wrote:
On Sat, Aug 06, 2016 at 11:07:14AM -0700, Santosh Shilimkar wrote:
ping !!
ping on a "RFC" after only 5 days in the middle of the merge window?
That's bold...
Personally, I rarely respond to RFC patches as obviously the submitter
doesn't think
On 6/18/16 8:46 AM, Joshua Houghton wrote:
Fix coding style issues in the following files:
ib_cm.c: add space
loop.c: convert spaces to tabs
sysctl.c: add space
tcp.h:convert spaces to tabs
tcp_connect.c:remove extra indentation in switch statement
tcp_recv.c: convert
Hi Dave,
On 2/26/16 9:43 PM, Santosh Shilimkar wrote:
Series is generated against net-next but also applies against Linus's tip
cleanly. The diff-stat looks bit scary since almost ~4K lines of code is
getting removed.
[...]
Entire patchset is available below git tree:
On 2/28/16 1:05 AM, Christoph Hellwig wrote:
On Sat, Feb 27, 2016 at 06:19:38PM -0800, Santosh Shilimkar wrote:
RDS iWarp support code has become stale and non testable. As
indicated earlier, am dropping the support for it.
If new iWarp user(s) shows up in future, we can adapat the RDS IB
On 2/28/16 1:08 AM, Christoph Hellwig wrote:
On Sat, Feb 27, 2016 at 06:19:48PM -0800, Santosh Shilimkar wrote:
Discovere Fast Memmory Registration support using IB device
IB_DEVICE_MEM_MGT_EXTENSIONS. Certain HCA might support just FRMR
or FMR or both FMR and FRWR. In case both mr type are
On 4/13/16 8:36 PM, David Miller wrote:
From: Santosh Shilimkar
Date: Fri, 8 Apr 2016 15:26:38 -0700
Patches are also available at below git tree.
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux.git
for_4.6/net-next/rds-fixes
"Bug fixes for 4.6" do not get targetted at the
On 9/16/15 12:13 PM, santosh shilimkar wrote:
On 9/16/2015 10:01 AM, Murali Karicheri wrote:
On 09/15/2015 05:20 PM, santosh shilimkar wrote:
On 9/15/2015 11:14 AM, Murali Karicheri wrote:
On 09/09/2015 12:38 PM, Murali Karicheri wrote:
[..]
Santosh,
I have checked v4.3-rc1 and I don't
On 9/22/15 8:42 AM, Nishanth Menon wrote:
Hi,
Basic support for systemd based distros to be supported by default on
keystone_defconfig.
Series based on v4.3-rc1
Nishanth Menon (2):
ARM: configs: keystone: sync to savedefconfig
ARM: configs: keystone: Add basic systemd related options
On 9/22/15 8:39 AM, Nishanth Menon wrote:
Keystone2 architecture files also include defconfig and devicetree
files which need maintainer to pick up and send for merge. Include the
same in the MAINTAINERS file so that we know where what needs to go.
Well this is I guess assumed responsibility
On 10/1/15 9:19 AM, David Laight wrote:
From: Santosh Shilimkar
Sent: 30 September 2015 18:24
...
This is being addressed by simply using per bucket rw lock which makes the
locking simple and very efficient. The hash table size is still an issue and
I plan to address it by using re-sizable
On 10/3/15 4:38 PM, Nishanth Menon wrote:
Hi,
Round 2 of the series with updated patch #1. This series introduces
SoC specific dt compatible property to allow for future SoCs to be
handled and for userspace applications that can introduce features
based on SoC they are functioning on.
V1 of
On 9/25/15 12:28 PM, Grygorii Strashko wrote:
This patch series contains patches which fixes wrong APIs usage in atomic
context on RT-kernel. The final goal is to make TI OMAP GPIO driver
compatible with -RT kernel as much as possible.
Patch 1: required to be compatible with -RT kernel, because
201 - 290 of 290 matches
Mail list logo
