On Tue, Oct 21, 2014 at 8:47 AM, Boaz Harrosh wrote:
> [Just that I thought we don't do that. I can show you a dozen
> ISA scsi LLD controllers which are a complete pain in the neck
> with a all subsection core support. There is not a single system
> on the planet that has this even possible,
Drop it, if there are no users.
It was simulating an OSD, but there did not seem to be much beyond
academic interest, and some interest in the use of aforementioned
block functions as a useful exercise in block driver writing.
On Tue, Oct 21, 2014 at 8:06 AM, Christoph Hellwig wrote:
> The
Drop it, if there are no users.
It was simulating an OSD, but there did not seem to be much beyond
academic interest, and some interest in the use of aforementioned
block functions as a useful exercise in block driver writing.
On Tue, Oct 21, 2014 at 8:06 AM, Christoph Hellwig
On Tue, Oct 21, 2014 at 8:47 AM, Boaz Harrosh o...@electrozaur.com wrote:
[Just that I thought we don't do that. I can show you a dozen
ISA scsi LLD controllers which are a complete pain in the neck
with a all subsection core support. There is not a single system
on the planet that has this
On Thu, Sep 12, 2013 at 5:57 PM, Jörn Engel wrote:
> On Wed, 11 September 2013 14:47:04 -0400, David Safford wrote:
>> But I also think that the existing (certified) TPMs are good enough
>> for direct use.
> That is equivalent to trusting the TPM chip not to be malicious. It
Indeed. While it
On Thu, Sep 12, 2013 at 5:57 PM, Jörn Engel jo...@logfs.org wrote:
On Wed, 11 September 2013 14:47:04 -0400, David Safford wrote:
But I also think that the existing (certified) TPMs are good enough
for direct use.
That is equivalent to trusting the TPM chip not to be malicious. It
Indeed.
On Wed, Sep 11, 2013 at 2:45 PM, Theodore Ts'o wrote:
> We should definitely do this. If the TPM driver could fetch some
> randomness and then call add_device_randomness() to feed this into the
> random driver's entropy pool when it initializes itself, that would be
> ***really*** cool.
rngd
On Wed, Sep 11, 2013 at 2:45 PM, Theodore Ts'o ty...@mit.edu wrote:
We should definitely do this. If the TPM driver could fetch some
randomness and then call add_device_randomness() to feed this into the
random driver's entropy pool when it initializes itself, that would be
***really*** cool.
On Tue, May 14, 2013 at 2:15 PM, Tejun Heo wrote:
> (Removed Linus from cc)
>
> The following patch has been applied to libata/for-3.10-fixes. Will
> push out to Linus with the next batch of updates.
>
> Thanks!
>
> From 8c3d3d4b12bf8de8c59fe1eb1bf866a8676ca309 Mon Sep 17 00:00:00 2001
> From:
On Tue, May 14, 2013 at 2:15 PM, Tejun Heo t...@kernel.org wrote:
(Removed Linus from cc)
The following patch has been applied to libata/for-3.10-fixes. Will
push out to Linus with the next batch of updates.
Thanks!
From 8c3d3d4b12bf8de8c59fe1eb1bf866a8676ca309 Mon Sep 17 00:00:00 2001
/phantom.h
SERIAL ATA (SATA) SUBSYSTEM
-M: Jeff Garzik
+M: Tejun Heo
L:linux-...@vger.kernel.org
T:git git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
S:Supported
You probably also want to change
* the git tree URL quoted above
* a ton of source
/phantom.h
SERIAL ATA (SATA) SUBSYSTEM
-M: Jeff Garzik jgar...@pobox.com
+M: Tejun Heo t...@kernel.org
L:linux-...@vger.kernel.org
T:git git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
S:Supported
You probably also want to change
* the git tree URL
Linux has really found its groove.
When I first got involved in Linux, there was no PCI API (now called the
hotplug or device API), and patch submission was a moderately painful
process of throwing spaghetti at a wall: sending and resending, with
both Linus and maintainers having to manually
Linux has really found its groove.
When I first got involved in Linux, there was no PCI API (now called the
hotplug or device API), and patch submission was a moderately painful
process of throwing spaghetti at a wall: sending and resending, with
both Linus and maintainers having to manually
On 04/30/2013 12:57 PM, Robert Richter wrote:
From: Robert Richter
mkinitrd looks at /sys/class/scsi_host/host$hostnum/proc_name to find
the module name of a disk driver. Current name is "highbank-ahci" but
the module is "sata_highbank". Rename it to match the module name.
Cc: Rob Herring
Summary:
1) More ACPI fixes, cleanups
2) Minor cleanups for sata_highbank, pata_at32, pata_octeon_cf,
sata_rcar
3) pata_legacy: small bug found in opti chipset code (untested fix,
due to ancient h/w)
4) sata_fsl: RX water mark config knob, some h/w needs it
5) pata_imx: cleanups,
On 04/29/2013 06:12 AM, Alexander Gordeev wrote:
Currently all interrupts assigned to AHCI ports show up in
'/proc/interrupts' as 'ahci'. This fix adds port numbers as
suffixes and hence makes the descriptions distinct.
Reported-by: Jan Beulich
Signed-off-by: Alexander Gordeev
---
On 04/29/2013 06:12 AM, Alexander Gordeev wrote:
Currently all interrupts assigned to AHCI ports show up in
'/proc/interrupts' as 'ahci'. This fix adds port numbers as
suffixes and hence makes the descriptions distinct.
Reported-by: Jan Beulich jbeul...@suse.com
Signed-off-by: Alexander Gordeev
Summary:
1) More ACPI fixes, cleanups
2) Minor cleanups for sata_highbank, pata_at32, pata_octeon_cf,
sata_rcar
3) pata_legacy: small bug found in opti chipset code (untested fix,
due to ancient h/w)
4) sata_fsl: RX water mark config knob, some h/w needs it
5) pata_imx: cleanups,
On 04/30/2013 12:57 PM, Robert Richter wrote:
From: Robert Richter robert.rich...@calxeda.com
mkinitrd looks at /sys/class/scsi_host/host$hostnum/proc_name to find
the module name of a disk driver. Current name is highbank-ahci but
the module is sata_highbank. Rename it to match the module
On 04/12/2013 02:51 AM, Silviu-Mihai Popescu wrote:
Convert use of devm_request_and_ioremap() to the newly introduced
devm_ioremap_resource() which provides more consistent error handling.
This was found with coccinelle.
Signed-off-by: Silviu-Mihai Popescu
---
drivers/ata/sata_rcar.c |6
On 04/12/2013 02:51 AM, Silviu-Mihai Popescu wrote:
Convert use of devm_request_and_ioremap() to the newly introduced
devm_ioremap_resource() which provides more consistent error handling.
This was found with coccinelle.
Signed-off-by: Silviu-Mihai Popescu silviupopescu1...@gmail.com
---
The HDIO_DRIVE_* fix is really the biggie.
Please pull 6d3bfc7be6f80d0c6ee6800d58d573343bf6e260 from
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
tags/upstream-linus
to receive the following updates:
drivers/ata/ata_piix.c| 14 +-
The HDIO_DRIVE_* fix is really the biggie.
Please pull 6d3bfc7be6f80d0c6ee6800d58d573343bf6e260 from
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
tags/upstream-linus
to receive the following updates:
drivers/ata/ata_piix.c| 14 +-
On 10/03/2012 01:45 AM, Jeff Garzik wrote:
Whee -- SHA-3 is out! I wanted to explore the new toy a bit, and
so, here is a blatantly untested rough draft of SHA-3 kernel support.
Why rough draft? Because answers to the questions below will inform a
more polished version.
Just to update
On 03/06/2013 06:26 AM, Alexander Gordeev wrote:
Split interrupt service routine into hardware context handler and
threaded context handler. That allows to protect ports with individual
locks rather than with a single host-wide lock, which results in better
parallelism.
Signed-off-by: Alexander
On 03/16/2013 10:32 AM, Alexandru Gheorghiu wrote:
Use resource_size function instead of explicit computation.
Patch found using coccinelle.
Signed-off-by: Alexandru Gheorghiu
---
drivers/ata/pata_octeon_cf.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
applied
--
To
On 03/29/2013 01:56 AM, Gwendal Grignou wrote:
commit 84a9a8cd9d0aa93c17e5815ab8a9cc4c0a765c63 changed the sense key
used for returning task registers, but HDIO_DRIVE_CMD ioctl was
not changed accordingly.
Tested: check that SMART ENABLE sent using HDIO_DRIVE_CMD returns 0
instead of EIO.
On 03/27/2013 08:51 AM, Krzysztof Mazur wrote:
On Mon, Mar 25, 2013 at 06:26:50PM +0100, Ronald wrote:
In reply to [1]: I have the same issue. Git bisect took 50+ rebuilds xD
Smartd does not work anymore since 84a9a8cd9 ([libata] Set proper SK
when CK_COND is set.).
I hope I'm not stepping on
On 03/06/2013 10:49 AM, Youquan Song wrote:
There is a quirk patch 5e5a4f5d5a08c9c504fe956391ac3dae2c66556d
"ata_piix: make DVD Drive recognisable on systems with Intel Sandybridge
chipsets(v2)" fixing the 4 ports IDE controller 32bit PIO mode.
We've hit a problem with DVD not recognized on
On 03/06/2013 10:49 AM, Youquan Song wrote:
There is a quirk patch 5e5a4f5d5a08c9c504fe956391ac3dae2c66556d
ata_piix: make DVD Drive recognisable on systems with Intel Sandybridge
chipsets(v2) fixing the 4 ports IDE controller 32bit PIO mode.
We've hit a problem with DVD not recognized on
On 03/27/2013 08:51 AM, Krzysztof Mazur wrote:
On Mon, Mar 25, 2013 at 06:26:50PM +0100, Ronald wrote:
In reply to [1]: I have the same issue. Git bisect took 50+ rebuilds xD
Smartd does not work anymore since 84a9a8cd9 ([libata] Set proper SK
when CK_COND is set.).
I hope I'm not stepping on
On 03/29/2013 01:56 AM, Gwendal Grignou wrote:
commit 84a9a8cd9d0aa93c17e5815ab8a9cc4c0a765c63 changed the sense key
used for returning task registers, but HDIO_DRIVE_CMD ioctl was
not changed accordingly.
Tested: check that SMART ENABLE sent using HDIO_DRIVE_CMD returns 0
instead of EIO.
On 03/16/2013 10:32 AM, Alexandru Gheorghiu wrote:
Use resource_size function instead of explicit computation.
Patch found using coccinelle.
Signed-off-by: Alexandru Gheorghiu gheorghiuan...@gmail.com
---
drivers/ata/pata_octeon_cf.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
On 03/06/2013 06:26 AM, Alexander Gordeev wrote:
Split interrupt service routine into hardware context handler and
threaded context handler. That allows to protect ports with individual
locks rather than with a single host-wide lock, which results in better
parallelism.
Signed-off-by: Alexander
On 10/03/2012 01:45 AM, Jeff Garzik wrote:
Whee -- SHA-3 is out! I wanted to explore the new toy a bit, and
so, here is a blatantly untested rough draft of SHA-3 kernel support.
Why rough draft? Because answers to the questions below will inform a
more polished version.
Just to update
Please pull b186affe0c9d39e4d3152cd34bffea8fe1fa17f4 from
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
tags/upstream-linus
to receive the following updates:
drivers/ata/Kconfig | 13 +++--
drivers/ata/ahci.c| 2 ++
drivers/ata/ata_piix.c
Please pull b186affe0c9d39e4d3152cd34bffea8fe1fa17f4 from
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
tags/upstream-linus
to receive the following updates:
drivers/ata/Kconfig | 13 +++--
drivers/ata/ahci.c| 2 ++
drivers/ata/ata_piix.c
On 03/02/2013 12:00 AM, Aaron Lu wrote:
ODD is not a common TLA for non-ATA people so they will get confused
by its meaning when they are configuring the kernel. This patch fixed
this problem by using ODD only after stating what it is.
Signed-off-by: Aaron Lu
---
v2:
Add a space before open
On 02/21/2013 02:01 PM, Rado Vrbovsky wrote:
From: Andrew Brownfield
In reference to the commit cd006086fa5d91414d8ff9ff2b78fbb593878e3c
"ata_piix: defer disks to the Hyper-V drivers by default",
this trivial patch adds a description to prefer_ms_hyperv.
[rvrbo...@redhat.com:
On 02/21/2013 02:08 PM, James Ralston wrote:
This patch adds the RAID-mode SATA Device IDs for the Intel Wellsburg PCH
Signed-off-by: James Ralston
---
drivers/ata/ahci.c |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
applied [manually]
--
To unsubscribe from this list:
On 03/01/2013 06:16 AM, Sander Eikelenboom wrote:
Fix a copy and paste mistake introduced in:
commit bc9b6407bd6df3ab7189e5622816bbc11ae9d2d8
"ACPI / PM: Rework the handling of devices depending on power resources"
Signed-off-by: Sander Eikelenboom
---
drivers/ata/libata-acpi.c |2 +-
On 03/01/2013 06:16 AM, Sander Eikelenboom wrote:
Fix a copy and paste mistake introduced in:
commit bc9b6407bd6df3ab7189e5622816bbc11ae9d2d8
ACPI / PM: Rework the handling of devices depending on power resources
Signed-off-by: Sander Eikelenboom li...@eikelenboom.it
---
On 02/21/2013 02:08 PM, James Ralston wrote:
This patch adds the RAID-mode SATA Device IDs for the Intel Wellsburg PCH
Signed-off-by: James Ralston james.d.rals...@intel.com
---
drivers/ata/ahci.c |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
applied [manually]
--
To
On 02/21/2013 02:01 PM, Rado Vrbovsky wrote:
From: Andrew Brownfield abrow...@redhat.com
In reference to the commit cd006086fa5d91414d8ff9ff2b78fbb593878e3c
ata_piix: defer disks to the Hyper-V drivers by default,
this trivial patch adds a description to prefer_ms_hyperv.
[rvrbo...@redhat.com:
On 03/02/2013 12:00 AM, Aaron Lu wrote:
ODD is not a common TLA for non-ATA people so they will get confused
by its meaning when they are configuring the kernel. This patch fixed
this problem by using ODD only after stating what it is.
Signed-off-by: Aaron Lu aaron...@intel.com
---
v2:
Add a
|6 --
include/acpi/acpi_bus.h |3 ---
3 files changed, 1 insertion(+), 34 deletions(-)
patches 1-2 Acked-by: Jeff Garzik
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo inf
+-
drivers/ata/libata-acpi.c |6 --
include/acpi/acpi_bus.h |3 ---
3 files changed, 1 insertion(+), 34 deletions(-)
patches 1-2 Acked-by: Jeff Garzik jgar...@pobox.com
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body
On 02/26/2013 11:58 AM, Tejun Heo wrote:
On Tue, Feb 26, 2013 at 08:47:30AM -0800, Linus Torvalds wrote:
Anyway, in the US it is definitely not a common term for normal people.
Googling "odd" doesn't give anything on optical drives on the first
page. On the other hand, >70% is about optical
On 02/25/2013 07:27 PM, Marc MERLIN wrote:
Howdy,
I seem to have the same problem (or similar) as Mathieu Desnoyers in
https://lkml.org/lkml/2013/2/22/437
I can reliably get my SSD to drop from the SATA bus given the right workload
on linux.
How can I tell if it's linux's fault of the drive's
On 02/25/2013 07:27 PM, Marc MERLIN wrote:
Howdy,
I seem to have the same problem (or similar) as Mathieu Desnoyers in
https://lkml.org/lkml/2013/2/22/437
I can reliably get my SSD to drop from the SATA bus given the right workload
on linux.
How can I tell if it's linux's fault of the drive's
On 02/26/2013 11:58 AM, Tejun Heo wrote:
On Tue, Feb 26, 2013 at 08:47:30AM -0800, Linus Torvalds wrote:
Anyway, in the US it is definitely not a common term for normal people.
Googling odd doesn't give anything on optical drives on the first
page. On the other hand, 70% is about optical
On 01/25/2013 03:01 PM, Seth Heasley wrote:
This patch adds the AHCI and RAID-mode SATA DeviceIDs for the Intel Avoton SOC.
Signed-off-by: Seth Heasley
---
drivers/ata/ahci.c | 16
1 file changed, 16 insertions(+)
applied 1-2
--
To unsubscribe from this list: send the
On 01/25/2013 03:01 PM, Seth Heasley wrote:
This patch adds the AHCI and RAID-mode SATA DeviceIDs for the Intel Avoton SOC.
Signed-off-by: Seth Heasley seth.heas...@intel.com
---
drivers/ata/ahci.c | 16
1 file changed, 16 insertions(+)
applied 1-2
--
To unsubscribe
Please pull 803739d25c2343da6d2f95eebdcbc08bf67097d4 from
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
tags/upstream-linus
to receive the following updates:
drivers/ata/ahci.c| 8 +++-
drivers/ata/libahci.c | 6 +++---
drivers/ata/libata-core.c | 22
Please pull 803739d25c2343da6d2f95eebdcbc08bf67097d4 from
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
tags/upstream-linus
to receive the following updates:
drivers/ata/ahci.c| 8 +++-
drivers/ata/libahci.c | 6 +++---
drivers/ata/libata-core.c | 22
On 01/16/2013 05:10 AM, Sedat Dilek wrote:
On Sat, Jan 5, 2013 at 3:20 AM, Huang, Shane wrote:
OK, I see the patch I mentioned to fix the problem was later reverted [1].
The real fix is "libata: replace sata_settings with devslp_timing" [2].
Yes, please use [2] which can also be found in
On 01/16/2013 05:10 AM, Sedat Dilek wrote:
On Sat, Jan 5, 2013 at 3:20 AM, Huang, Shane shane.hu...@amd.com wrote:
OK, I see the patch I mentioned to fix the problem was later reverted [1].
The real fix is libata: replace sata_settings with devslp_timing [2].
Yes, please use [2] which can
On 01/08/2013 01:16 PM, Joshua Coombs wrote:
Add a call to the IDE LED Trigger within the Marvell SATA driver to allow
Marvell SoC devices to show SATA activity via GPIO connected LEDs.
Signed-off-by: Joshua Coombs
---
drivers/ata/sata_mv.c | 3 +++
drivers/leds/Kconfig | 3 +--
2 files
On 01/08/2013 01:16 PM, Joshua Coombs wrote:
Add a call to the IDE LED Trigger within the Marvell SATA driver to allow
Marvell SoC devices to show SATA activity via GPIO connected LEDs.
Signed-off-by: Joshua Coombs josh.coo...@gmail.com
---
drivers/ata/sata_mv.c | 3 +++
drivers/leds/Kconfig
use pci_get_drvdata() helper
pata_of_platform: fix compile error
ahci_platform: make structs static
Christian Gmeiner (1):
pata_cs5536: add quirk for broken udma
Jeff Garzik (3):
Revert "libata: check SATA_SETTINGS log with HW Feature Ctrl"
Revert "pata_octeo
-by: Xiaotian Feng
Cc: Jeff Garzik
Cc: James Bottomley
Cc: sta...@kernel.org
Cc: linux-...@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
drivers/ata/libata-scsi.c |6 --
1 file changed, 4 insertions(+), 2 deletions(-)
applied
--
To unsubscribe from this list: send the line
idia MCP61 chipset, sata hdd and ide
dvd-rom.
Signed-off-by: Konstantin Khlebnikov
Signed-off-by: Borislav Petkov
Signed-off-by: Jeff Garzik
---
Sep 27 13:48:23 buzz kernel: [ 63.815060] ACPI: PCI Interrupt Link [APSI]
enabled at IRQ 20
Sep 27 13:48:23 buzz kernel: [ 63.987035] scsi0 :
chipset, sata hdd and ide
dvd-rom.
Signed-off-by: Konstantin Khlebnikov khlebni...@openvz.org
Signed-off-by: Borislav Petkov b...@alien8.de
Signed-off-by: Jeff Garzik jgar...@redhat.com
---
Sep 27 13:48:23 buzz kernel: [ 63.815060] ACPI: PCI Interrupt Link [APSI]
enabled at IRQ 20
Sep 27 13:48
-by: Xiaotian Feng dannyf...@tencent.com
Cc: Jeff Garzik jgar...@redhat.com
Cc: James Bottomley jbottom...@parallels.com
Cc: sta...@kernel.org
Cc: linux-...@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
drivers/ata/libata-scsi.c |6 --
1 file changed, 4 insertions(+), 2 deletions
pci_get_drvdata() helper
pata_of_platform: fix compile error
ahci_platform: make structs static
Christian Gmeiner (1):
pata_cs5536: add quirk for broken udma
Jeff Garzik (3):
Revert libata: check SATA_SETTINGS log with HW Feature Ctrl
Revert pata_octeon_cf: perform host
On 12/03/2012 02:29 PM, Sergei Shtylyov wrote:
Hello.
On 11/30/2012 01:56 PM, Bartlomiej Zolnierkiewicz wrote:
From: Bartlomiej Zolnierkiewicz
Subject: [PATCH] ata_piix: re-oder code and remove prototypes
You meant "re-order", I think.
Signed-off-by: Bartlomiej Zolnierkiewicz
|6 +++
drivers/ata/libahci.c | 118 ++---
3 files changed, 207 insertions(+), 10 deletions(-)
Acked-by: Jeff Garzik
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.
On 11/30/2012 05:56 AM, Bartlomiej Zolnierkiewicz wrote:
From: Bartlomiej Zolnierkiewicz
Subject: [PATCH] ata_piix: re-oder code and remove prototypes
Signed-off-by: Bartlomiej Zolnierkiewicz
Signed-off-by: Kyungmin Park
---
Jeff, please apply. Thanks!
drivers/ata/ata_piix.c | 419
On 11/30/2012 05:56 AM, Bartlomiej Zolnierkiewicz wrote:
From: Bartlomiej Zolnierkiewicz b.zolnier...@samsung.com
Subject: [PATCH] ata_piix: re-oder code and remove prototypes
Signed-off-by: Bartlomiej Zolnierkiewicz b.zolnier...@samsung.com
Signed-off-by: Kyungmin Park
+--
drivers/ata/ahci.h|6 +++
drivers/ata/libahci.c | 118 ++---
3 files changed, 207 insertions(+), 10 deletions(-)
Acked-by: Jeff Garzik jgar...@redhat.com
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body
On 12/03/2012 02:29 PM, Sergei Shtylyov wrote:
Hello.
On 11/30/2012 01:56 PM, Bartlomiej Zolnierkiewicz wrote:
From: Bartlomiej Zolnierkiewicz b.zolnier...@samsung.com
Subject: [PATCH] ata_piix: re-oder code and remove prototypes
You meant re-order, I think.
Signed-off-by: Bartlomiej
On 09/18/2012 11:48 AM, Olaf Hering wrote:
An earlier commit cd006086fa5d91414d8ff9ff2b78fbb593878e3c ("ata_piix:
defer disks to the Hyper-V drivers by default") broke MS Virtual PC
guests. Hyper-V guests and Virtual PC guests have nearly identical DMI
info. As a result the driver does currently
On 10/28/2012 04:05 AM, Joe Perches wrote:
dev_ calls take less code than dev_printk(KERN_
and reducing object size is good.
Coalesce formats for easier grep.
Signed-off-by: Joe Perches
---
drivers/ata/pata_cmd64x.c |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
applied
On 10/28/2012 04:05 AM, Joe Perches wrote:
dev_level calls take less code than dev_printk(KERN_LEVEL
and reducing object size is good.
Coalesce formats for easier grep.
Signed-off-by: Joe Perches j...@perches.com
---
drivers/ata/pata_cmd64x.c |6 +++---
1 files changed, 3 insertions(+),
On 09/18/2012 11:48 AM, Olaf Hering wrote:
An earlier commit cd006086fa5d91414d8ff9ff2b78fbb593878e3c (ata_piix:
defer disks to the Hyper-V drivers by default) broke MS Virtual PC
guests. Hyper-V guests and Virtual PC guests have nearly identical DMI
info. As a result the driver does currently
If you were going to shoot me for not sending these earlier, you would be
right. -rc6 beat me by ~2 hours it seems, and they really should have
gone out to libata-dev.git and you long before that.
These have been in libata-dev.git for a day or so (unfortunately
linux-next is on vacation). The
On 11/16/2012 11:02 AM, Huang, Shane wrote:
I tried word 78 bit 5(Hardware Feature Control) which does not work,
it is 0 on my HDD sample with log 30h page 08h and DevSlp supported.
Seems that word 78 bit 5 is only the sufficient condition, not the
essential condition. Do you guys have
On 11/16/2012 11:02 AM, Huang, Shane wrote:
I tried word 78 bit 5(Hardware Feature Control) which does not work,
it is 0 on my HDD sample with log 30h page 08h and DevSlp supported.
Seems that word 78 bit 5 is only the sufficient condition, not the
essential condition. Do you guys have
If you were going to shoot me for not sending these earlier, you would be
right. -rc6 beat me by ~2 hours it seems, and they really should have
gone out to libata-dev.git and you long before that.
These have been in libata-dev.git for a day or so (unfortunately
linux-next is on vacation). The
SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
Only references the callbacks on CONFIG_PM_SLEEP (instead of CONFIG_PM).
Cc: Jeff Garzik
Cc: Viresh Kumar
Cc: linux-...@vger.kernel.org
Signed-off-by: Yuanhan Liu
Signed-off-by: Fengguang Wu
---
drivers/ata/ahci_platform.c |2 +-
drivers/ata/pata_arasan_cf.c
is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
Signed-off-by: Arnd Bergmann
Cc: Mark Langsdorf
Cc: Rob Herring
Cc: Jeff Garzik
---
drivers/ata/sata_highbank.c |2 +-
1
On 11/08/2012 10:09 AM, Viresh Kumar wrote:
From: Vipul Kumar Samar
PATA arasan driver expects the clock to be set to 166 MHz for proper
functioning.
This patch sets clk to 166 MHz in probe.
Signed-off-by: Vipul Kumar Samar
Signed-off-by: Viresh Kumar
---
drivers/ata/pata_arasan_cf.c | 6
On 11/09/2012 02:18 PM, Jeff Moyer wrote:
Signed-off-by: Jeff Moyer
---
drivers/ata/libata-scsi.c |3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
Acked-by: Jeff Garzik
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of
On 11/15/2012 05:03 PM, Christian Gmeiner wrote:
I am working on a device which uses the cs5536 pata driver. There
are some broken hardware revisions out in the field, which can be
detected via DMI. On older versions with an embedded BIOS I
used libata.dma=0 to disable dma completely.
Now we are
On 11/15/2012 05:03 PM, Christian Gmeiner wrote:
I am working on a device which uses the cs5536 pata driver. There
are some broken hardware revisions out in the field, which can be
detected via DMI. On older versions with an embedded BIOS I
used libata.dma=0 to disable dma completely.
Now we are
On 11/09/2012 02:18 PM, Jeff Moyer wrote:
Signed-off-by: Jeff Moyer jmo...@redhat.com
---
drivers/ata/libata-scsi.c |3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
Acked-by: Jeff Garzik jgar...@redhat.com
--
To unsubscribe from this list: send the line unsubscribe linux
On 11/08/2012 10:09 AM, Viresh Kumar wrote:
From: Vipul Kumar Samar vipulkumar.sa...@st.com
PATA arasan driver expects the clock to be set to 166 MHz for proper
functioning.
This patch sets clk to 166 MHz in probe.
Signed-off-by: Vipul Kumar Samar vipulkumar.sa...@st.com
Signed-off-by: Viresh
: Jeff Garzik jgar...@redhat.com
---
drivers/ata/sata_highbank.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
applied
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http
SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
Only references the callbacks on CONFIG_PM_SLEEP (instead of CONFIG_PM).
Cc: Jeff Garzik jgar...@pobox.com
Cc: Viresh Kumar viresh.li...@gmail.com
Cc: linux-...@vger.kernel.org
Signed-off-by: Yuanhan Liu yuanhan@linux.intel.com
Signed-off-by: Fengguang Wu fengguang
On 11/08/2012 11:32 AM, Ed Cashin wrote:
This patch makes the aoe driver follow expected behavior when
the user uses ioctl to get the ATA device identify information.
Signed-off-by: Ed Cashin
---
drivers/block/aoe/aoe.h|1 +
drivers/block/aoe/aoeblk.c | 30
On 11/08/2012 11:32 AM, Ed Cashin wrote:
This patch makes the aoe driver follow expected behavior when
the user uses ioctl to get the ATA device identify information.
Signed-off-by: Ed Cashin ecas...@coraid.com
---
drivers/block/aoe/aoe.h|1 +
drivers/block/aoe/aoeblk.c | 30
On 10/03/2012 03:11 AM, Herbert Xu wrote:
On Wed, Oct 03, 2012 at 02:53:27AM -0400, Jeff Garzik wrote:
Maybe my patch is the best we can do in the current kernel, if
dynamic digest size is not currently possible. Register "sha3_224",
"sha3_256", ... as you describe, and w
On 10/03/2012 02:06 AM, David Miller wrote:
From: Jeff Garzik
Date: Wed, 3 Oct 2012 01:45:42 -0400
1) tcrypt setup blatantly wrong. What is the best setup here? Define a
separate entry for each digest length? Is there some special string
descriptor format that is desired, like "sha
On 10/03/2012 02:06 AM, David Miller wrote:
From: Jeff Garzik j...@garzik.org
Date: Wed, 3 Oct 2012 01:45:42 -0400
1) tcrypt setup blatantly wrong. What is the best setup here? Define a
separate entry for each digest length? Is there some special string
descriptor format that is desired
On 10/03/2012 03:11 AM, Herbert Xu wrote:
On Wed, Oct 03, 2012 at 02:53:27AM -0400, Jeff Garzik wrote:
Maybe my patch is the best we can do in the current kernel, if
dynamic digest size is not currently possible. Register sha3_224,
sha3_256, ... as you describe, and wait for actual users
es appear.
Commit e52113b7b4ace50ab586b426098c6d69d75c263a
Branch sha3
Repo git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/linux.git
References:
http://keccak.noekeon.org/
http://www.mjos.fi/dist/readable_keccak.tgz
http://www.nist.gov/itl/csd/sha-100212.cfm
Not-signed-off-by: Jeff Garzik
crypto/K
On 10/02/2012 03:44 PM, Michael Tokarev wrote:
On 02.10.2012 23:40, Jeff Garzik wrote:
Minor libata updates, nothing notable.
1) Apply -- and then revert -- the FUA feature. Caused
disk corruption in linux-next, proving it cannot be turned on by
default.
Any details on that? Disk
_base + HCONTROL);
+ iowrite32(hcontrol | CLEAR_ERROR,
+ hcr_base + HCONTROL);
+
+ /* Clear HControl[27] */
+ iowrite32(hcontrol & ~CLEAR_ERROR,
+
On 10/02/2012 12:42 PM, Alexander Gordeev wrote:
On Tue, Oct 02, 2012 at 07:09:29AM +0200, Ingo Molnar wrote:
+irqreturn_t ahci_hw_interrupt(int irq, void *dev_instance)
+{
+ struct ata_port *ap_this = dev_instance;
+ struct ahci_port_priv *pp = ap_this->private_data;
+ struct
1 - 100 of 7471 matches
Mail list logo
