Re: [PATCH v6 09/11] drivers: usb: musb: Add device tree support for omap musb glue
Hi, On Fri, Aug 3, 2012 at 7:04 PM, Felipe Balbi wrote: > Hi, > > On Mon, Jul 30, 2012 at 02:39:58PM +0530, Kishon Vijay Abraham I wrote: >> Added device tree support for omap musb driver and updated the >> Documentation with device tree binding information. >> >> Signed-off-by: Kishon Vijay Abraham I > > This looks good and I think I can take this without any dependencies > again. Correct ? correct. Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v6 09/11] drivers: usb: musb: Add device tree support for omap musb glue
Hi, On Mon, Jul 30, 2012 at 02:39:58PM +0530, Kishon Vijay Abraham I wrote: > Added device tree support for omap musb driver and updated the > Documentation with device tree binding information. > > Signed-off-by: Kishon Vijay Abraham I This looks good and I think I can take this without any dependencies again. Correct ? -- balbi signature.asc Description: Digital signature
Re: [PATCH v6 09/11] drivers: usb: musb: Add device tree support for omap musb glue
Hi, On Mon, Jul 30, 2012 at 02:39:58PM +0530, Kishon Vijay Abraham I wrote: Added device tree support for omap musb driver and updated the Documentation with device tree binding information. Signed-off-by: Kishon Vijay Abraham I kis...@ti.com This looks good and I think I can take this without any dependencies again. Correct ? -- balbi signature.asc Description: Digital signature
Re: [PATCH v6 09/11] drivers: usb: musb: Add device tree support for omap musb glue
Hi, On Fri, Aug 3, 2012 at 7:04 PM, Felipe Balbi ba...@ti.com wrote: Hi, On Mon, Jul 30, 2012 at 02:39:58PM +0530, Kishon Vijay Abraham I wrote: Added device tree support for omap musb driver and updated the Documentation with device tree binding information. Signed-off-by: Kishon Vijay Abraham I kis...@ti.com This looks good and I think I can take this without any dependencies again. Correct ? correct. Thanks Kishon -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
[PATCH v6 09/11] drivers: usb: musb: Add device tree support for omap musb glue
Added device tree support for omap musb driver and updated the Documentation with device tree binding information. Signed-off-by: Kishon Vijay Abraham I --- Documentation/devicetree/bindings/usb/omap-usb.txt | 34 +++- drivers/usb/musb/omap2430.c| 54 2 files changed, 87 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 52f503b..49a90fb 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -1,4 +1,4 @@ -OMAP USB PHY +OMAP USB PHY AND GLUE OMAP USB2 PHY @@ -15,3 +15,35 @@ usb2phy@4a0ad080 { reg = <0x4a0ad080 0x58>, <0x4a002300 0x1>; }; + +OMAP MUSB GLUE + - compatible : Should be "ti,musb-omap2430" + - ti,hwmods : must be "usb_otg_hs" + - multipoint : Should be "1" indicating the musb controller supports + multipoint. This is a MUSB configuration-specific setting. + - num_eps : Specifies the number of endpoints. This is also a + MUSB configuration-specific setting. Should be set to "16" + - ram_bits : Specifies the ram address size. Should be set to "12" + - interface_type : This is a board specific setting to describe the type of + interface between the controller and the phy. It should be "0" or "1" + specifying ULPI and UTMI respectively. + - mode : Should be "3" to represent OTG. "1" signifies HOST and "2" + represents PERIPHERAL. + - power : Should be "50". This signifies the controller can supply upto + 100mA when operating in host mode. + +SOC specific device node entry +usb_otg_hs: usb_otg_hs@4a0ab000 { + compatible = "ti,musb-omap2430"; + ti,hwmods = "usb_otg_hs"; + multipoint = <1>; + num_eps = <16>; + ram_bits = <12>; +}; + +Board specific device node entry +_otg_hs { + interface_type = <1>; + mode = <3>; + power = <50>; +}; diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index addbebf..5db228f 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -469,8 +470,11 @@ static u64 omap2430_dmamask = DMA_BIT_MASK(32); static int __devinit omap2430_probe(struct platform_device *pdev) { struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data; + struct omap_musb_board_data *data; struct platform_device *musb; struct omap2430_glue*glue; + struct device_node *np = pdev->dev.of_node; + struct musb_hdrc_config *config; struct resource *res; int ret = -ENOMEM; @@ -500,6 +504,42 @@ static int __devinit omap2430_probe(struct platform_device *pdev) if (glue->control_otghs == NULL) dev_dbg(>dev, "Failed to obtain control memory\n"); + if (np) { + pdata = devm_kzalloc(>dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(>dev, + "failed to allocate musb platfrom data\n"); + ret = -ENOMEM; + goto err1; + } + + data = devm_kzalloc(>dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(>dev, + "failed to allocate musb board data\n"); + ret = -ENOMEM; + goto err1; + } + + config = devm_kzalloc(>dev, sizeof(*config), GFP_KERNEL); + if (!data) { + dev_err(>dev, + "failed to allocate musb hdrc config\n"); + goto err1; + } + + of_property_read_u32(np, "mode", (u32 *)>mode); + of_property_read_u32(np, "interface_type", + (u32 *)>interface_type); + of_property_read_u32(np, "num_eps", (u32 *)>num_eps); + of_property_read_u32(np, "ram_bits", (u32 *)>ram_bits); + of_property_read_u32(np, "power", (u32 *)>power); + config->multipoint = of_property_read_bool(np, "multipoint"); + + pdata->board_data = data; + pdata->config = config; + } + pdata->platform_ops = _ops; platform_set_drvdata(pdev, glue); @@ -597,12 +637,26 @@ static struct dev_pm_ops omap2430_pm_ops = { #define DEV_PM_OPS NULL #endif +#ifdef CONFIG_OF +static const struct of_device_id omap2430_id_table[] = { + { + .compatible = "ti,omap4-musb" + }, + { + .compatible = "ti,omap3-musb" + }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap2430_id_table);
[PATCH v6 09/11] drivers: usb: musb: Add device tree support for omap musb glue
Added device tree support for omap musb driver and updated the Documentation with device tree binding information. Signed-off-by: Kishon Vijay Abraham I kis...@ti.com --- Documentation/devicetree/bindings/usb/omap-usb.txt | 34 +++- drivers/usb/musb/omap2430.c| 54 2 files changed, 87 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 52f503b..49a90fb 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -1,4 +1,4 @@ -OMAP USB PHY +OMAP USB PHY AND GLUE OMAP USB2 PHY @@ -15,3 +15,35 @@ usb2phy@4a0ad080 { reg = 0x4a0ad080 0x58, 0x4a002300 0x1; }; + +OMAP MUSB GLUE + - compatible : Should be ti,musb-omap2430 + - ti,hwmods : must be usb_otg_hs + - multipoint : Should be 1 indicating the musb controller supports + multipoint. This is a MUSB configuration-specific setting. + - num_eps : Specifies the number of endpoints. This is also a + MUSB configuration-specific setting. Should be set to 16 + - ram_bits : Specifies the ram address size. Should be set to 12 + - interface_type : This is a board specific setting to describe the type of + interface between the controller and the phy. It should be 0 or 1 + specifying ULPI and UTMI respectively. + - mode : Should be 3 to represent OTG. 1 signifies HOST and 2 + represents PERIPHERAL. + - power : Should be 50. This signifies the controller can supply upto + 100mA when operating in host mode. + +SOC specific device node entry +usb_otg_hs: usb_otg_hs@4a0ab000 { + compatible = ti,musb-omap2430; + ti,hwmods = usb_otg_hs; + multipoint = 1; + num_eps = 16; + ram_bits = 12; +}; + +Board specific device node entry +usb_otg_hs { + interface_type = 1; + mode = 3; + power = 50; +}; diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index addbebf..5db228f 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -30,6 +30,7 @@ #include linux/init.h #include linux/list.h #include linux/io.h +#include linux/of.h #include linux/platform_device.h #include linux/dma-mapping.h #include linux/pm_runtime.h @@ -469,8 +470,11 @@ static u64 omap2430_dmamask = DMA_BIT_MASK(32); static int __devinit omap2430_probe(struct platform_device *pdev) { struct musb_hdrc_platform_data *pdata = pdev-dev.platform_data; + struct omap_musb_board_data *data; struct platform_device *musb; struct omap2430_glue*glue; + struct device_node *np = pdev-dev.of_node; + struct musb_hdrc_config *config; struct resource *res; int ret = -ENOMEM; @@ -500,6 +504,42 @@ static int __devinit omap2430_probe(struct platform_device *pdev) if (glue-control_otghs == NULL) dev_dbg(pdev-dev, Failed to obtain control memory\n); + if (np) { + pdata = devm_kzalloc(pdev-dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(pdev-dev, + failed to allocate musb platfrom data\n); + ret = -ENOMEM; + goto err1; + } + + data = devm_kzalloc(pdev-dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(pdev-dev, + failed to allocate musb board data\n); + ret = -ENOMEM; + goto err1; + } + + config = devm_kzalloc(pdev-dev, sizeof(*config), GFP_KERNEL); + if (!data) { + dev_err(pdev-dev, + failed to allocate musb hdrc config\n); + goto err1; + } + + of_property_read_u32(np, mode, (u32 *)pdata-mode); + of_property_read_u32(np, interface_type, + (u32 *)data-interface_type); + of_property_read_u32(np, num_eps, (u32 *)config-num_eps); + of_property_read_u32(np, ram_bits, (u32 *)config-ram_bits); + of_property_read_u32(np, power, (u32 *)pdata-power); + config-multipoint = of_property_read_bool(np, multipoint); + + pdata-board_data = data; + pdata-config = config; + } + pdata-platform_ops = omap2430_ops; platform_set_drvdata(pdev, glue); @@ -597,12 +637,26 @@ static struct dev_pm_ops omap2430_pm_ops = { #define DEV_PM_OPS NULL #endif +#ifdef CONFIG_OF +static const struct of_device_id omap2430_id_table[] = { + { + .compatible = ti,omap4-musb + }, + { +