Re: [Patch v3] input: drv260x: Add TI drv260x haptics driver
Dmitry Thanks for the review. On 07/29/2014 03:01 PM, Dmitry Torokhov wrote: > On Tue, Jul 29, 2014 at 02:32:27PM -0500, Dan Murphy wrote: >> Add the TI drv260x haptics/vibrator driver. >> This device uses the input force feedback >> to produce a wave form to driver an >> ERM or LRA actuator device. >> >> The initial driver supports the devices >> real time playback mode. But the device >> has additional wave patterns in ROM. >> >> This functionality will be added in >> future patchsets. >> >> Product data sheet is located here: >> http://www.ti.com/product/drv2605 >> >> Signed-off-by: Dan Murphy >> --- >> >> v3 - Updated binding doc, changed to memless device, updated input alloc to >> devm, removed mutex locking, add sanity checks for mode and library - >> https://patchwork.kernel.org/patch/4635421/ >> v2 - Fixed binding doc and patch headline - >> https://patchwork.kernel.org/patch/4619641/ >> >> .../devicetree/bindings/input/ti,drv260x.txt | 50 ++ >> drivers/input/misc/Kconfig |9 + >> drivers/input/misc/Makefile|1 + >> drivers/input/misc/drv260x.c | 515 >> >> include/dt-bindings/input/ti-drv260x.h | 30 ++ >> include/linux/input/drv260x.h | 181 +++ >> 6 files changed, 786 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/input/ti,drv260x.txt >> create mode 100644 drivers/input/misc/drv260x.c >> create mode 100644 include/dt-bindings/input/ti-drv260x.h >> create mode 100644 include/linux/input/drv260x.h >> >> diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt >> b/Documentation/devicetree/bindings/input/ti,drv260x.txt >> new file mode 100644 >> index 000..8e6970d >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt >> @@ -0,0 +1,50 @@ >> +Texas Instruments - drv260x Haptics driver family >> + >> +The drv260x family serial control bus communicates through I2C protocols >> + >> +Required properties: >> +- compatible - One of: >> +"ti,drv2604" - DRV2604 >> +"ti,drv2605" - DRV2605 >> +"ti,drv2605l" - DRV2605L >> +- reg - I2C slave address >> +- supply- Required supply regulators are: >> +"vbat" - battery voltage >> +- mode - Power up mode of the chip (defined in >> include/dt-bindings/input/ti-drv260x.h) >> +DRV260X_LRA_MODE - Linear Resonance Actuator mode >> (Piezoelectric) >> +DRV260X_LRA_NO_CAL_MODE - This is a LRA Mode but there is no >> calibration >> +sequence during init. And the device is >> configured for real >> +time playback mode (RTP mode). >> +DRV260X_ERM_MODE - Eccentric Rotating Mass mode (Rotary >> vibrator) >> +- library-sel - These are ROM based waveforms pre-programmed into the >> IC. >> +This should be set to set the library to use at >> power up. >> +(defined in >> include/dt-bindings/input/ti-drv260x.h) >> +DRV260X_LIB_A - Pre-programmed Library >> +DRV260X_LIB_B - Pre-programmed Library >> +DRV260X_LIB_C - Pre-programmed Library >> +DRV260X_LIB_D - Pre-programmed Library >> +DRV260X_LIB_E - Pre-programmed Library >> +DRV260X_LIB_F - Pre-programmed Library >> + >> +Optional properties: >> +- enable-gpio - gpio pin to enable/disable the device. >> +- vib_rated_voltage - The rated voltage of the actuator in millivolts. >> + If this is not set then the value will be defaulted to >> + 3.2 v. >> +- vib_overdrive_voltage - The overdrive voltage of the actuator in >> millivolts. >> + If this is not set then the value will be defaulted to >> + 3.2 v. >> +Example: >> + >> +drv2605l: drv2605l@5a { >> +compatible = "ti,drv2605l"; >> +reg = <0x5a>; >> +enable-gpio = < 28 GPIO_ACTIVE_HIGH>; >> +mode = ; >> +library-sel = ; >> +vib-rated-voltage = <3200>; >> +vib-overdriver-voltage = <3200>; >> +}; >> + >> +For more product information please see the link below: >> +http://www.ti.com/product/drv2605 >> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig >> index 2ff4425..99f6762 100644 >> --- a/drivers/input/misc/Kconfig >> +++ b/drivers/input/misc/Kconfig >> @@ -676,4 +676,13 @@ config INPUT_SOC_BUTTON_ARRAY >>To compile this driver as a module, choose M here: the >>module will be called soc_button_array. >> >> +config INPUT_DRV260X_HAPTICS >> +tristate "TI DRV260X haptics support" >> +depends on INPUT && I2C >> +help >> + Say Y to enable support for the TI DRV260X haptics driver. >> + >> + To compile this driver as a module, choose M
Re: [Patch v3] input: drv260x: Add TI drv260x haptics driver
On Tue, Jul 29, 2014 at 02:32:27PM -0500, Dan Murphy wrote: > Add the TI drv260x haptics/vibrator driver. > This device uses the input force feedback > to produce a wave form to driver an > ERM or LRA actuator device. > > The initial driver supports the devices > real time playback mode. But the device > has additional wave patterns in ROM. > > This functionality will be added in > future patchsets. > > Product data sheet is located here: > http://www.ti.com/product/drv2605 > > Signed-off-by: Dan Murphy > --- > > v3 - Updated binding doc, changed to memless device, updated input alloc to > devm, removed mutex locking, add sanity checks for mode and library - > https://patchwork.kernel.org/patch/4635421/ > v2 - Fixed binding doc and patch headline - > https://patchwork.kernel.org/patch/4619641/ > > .../devicetree/bindings/input/ti,drv260x.txt | 50 ++ > drivers/input/misc/Kconfig |9 + > drivers/input/misc/Makefile|1 + > drivers/input/misc/drv260x.c | 515 > > include/dt-bindings/input/ti-drv260x.h | 30 ++ > include/linux/input/drv260x.h | 181 +++ > 6 files changed, 786 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/ti,drv260x.txt > create mode 100644 drivers/input/misc/drv260x.c > create mode 100644 include/dt-bindings/input/ti-drv260x.h > create mode 100644 include/linux/input/drv260x.h > > diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt > b/Documentation/devicetree/bindings/input/ti,drv260x.txt > new file mode 100644 > index 000..8e6970d > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt > @@ -0,0 +1,50 @@ > +Texas Instruments - drv260x Haptics driver family > + > +The drv260x family serial control bus communicates through I2C protocols > + > +Required properties: > + - compatible - One of: > + "ti,drv2604" - DRV2604 > + "ti,drv2605" - DRV2605 > + "ti,drv2605l" - DRV2605L > + - reg - I2C slave address > + - supply- Required supply regulators are: > + "vbat" - battery voltage > + - mode - Power up mode of the chip (defined in > include/dt-bindings/input/ti-drv260x.h) > + DRV260X_LRA_MODE - Linear Resonance Actuator mode > (Piezoelectric) > + DRV260X_LRA_NO_CAL_MODE - This is a LRA Mode but there is no > calibration > + sequence during init. And the device is > configured for real > + time playback mode (RTP mode). > + DRV260X_ERM_MODE - Eccentric Rotating Mass mode (Rotary > vibrator) > + - library-sel - These are ROM based waveforms pre-programmed into the > IC. > + This should be set to set the library to use at > power up. > + (defined in > include/dt-bindings/input/ti-drv260x.h) > + DRV260X_LIB_A - Pre-programmed Library > + DRV260X_LIB_B - Pre-programmed Library > + DRV260X_LIB_C - Pre-programmed Library > + DRV260X_LIB_D - Pre-programmed Library > + DRV260X_LIB_E - Pre-programmed Library > + DRV260X_LIB_F - Pre-programmed Library > + > +Optional properties: > + - enable-gpio - gpio pin to enable/disable the device. > + - vib_rated_voltage - The rated voltage of the actuator in millivolts. > + If this is not set then the value will be defaulted to > + 3.2 v. > + - vib_overdrive_voltage - The overdrive voltage of the actuator in > millivolts. > + If this is not set then the value will be defaulted to > + 3.2 v. > +Example: > + > +drv2605l: drv2605l@5a { > + compatible = "ti,drv2605l"; > + reg = <0x5a>; > + enable-gpio = < 28 GPIO_ACTIVE_HIGH>; > + mode = ; > + library-sel = ; > + vib-rated-voltage = <3200>; > + vib-overdriver-voltage = <3200>; > +}; > + > +For more product information please see the link below: > +http://www.ti.com/product/drv2605 > diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig > index 2ff4425..99f6762 100644 > --- a/drivers/input/misc/Kconfig > +++ b/drivers/input/misc/Kconfig > @@ -676,4 +676,13 @@ config INPUT_SOC_BUTTON_ARRAY > To compile this driver as a module, choose M here: the > module will be called soc_button_array. > > +config INPUT_DRV260X_HAPTICS > + tristate "TI DRV260X haptics support" > + depends on INPUT && I2C > + help > + Say Y to enable support for the TI DRV260X haptics driver. > + > + To compile this driver as a module, choose M here: the > + module will be called drv260x-haptics. > + > endif > diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile > index
[Patch v3] input: drv260x: Add TI drv260x haptics driver
Add the TI drv260x haptics/vibrator driver. This device uses the input force feedback to produce a wave form to driver an ERM or LRA actuator device. The initial driver supports the devices real time playback mode. But the device has additional wave patterns in ROM. This functionality will be added in future patchsets. Product data sheet is located here: http://www.ti.com/product/drv2605 Signed-off-by: Dan Murphy --- v3 - Updated binding doc, changed to memless device, updated input alloc to devm, removed mutex locking, add sanity checks for mode and library - https://patchwork.kernel.org/patch/4635421/ v2 - Fixed binding doc and patch headline - https://patchwork.kernel.org/patch/4619641/ .../devicetree/bindings/input/ti,drv260x.txt | 50 ++ drivers/input/misc/Kconfig |9 + drivers/input/misc/Makefile|1 + drivers/input/misc/drv260x.c | 515 include/dt-bindings/input/ti-drv260x.h | 30 ++ include/linux/input/drv260x.h | 181 +++ 6 files changed, 786 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/ti,drv260x.txt create mode 100644 drivers/input/misc/drv260x.c create mode 100644 include/dt-bindings/input/ti-drv260x.h create mode 100644 include/linux/input/drv260x.h diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt new file mode 100644 index 000..8e6970d --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt @@ -0,0 +1,50 @@ +Texas Instruments - drv260x Haptics driver family + +The drv260x family serial control bus communicates through I2C protocols + +Required properties: + - compatible - One of: + "ti,drv2604" - DRV2604 + "ti,drv2605" - DRV2605 + "ti,drv2605l" - DRV2605L + - reg - I2C slave address + - supply- Required supply regulators are: + "vbat" - battery voltage + - mode - Power up mode of the chip (defined in include/dt-bindings/input/ti-drv260x.h) + DRV260X_LRA_MODE - Linear Resonance Actuator mode (Piezoelectric) + DRV260X_LRA_NO_CAL_MODE - This is a LRA Mode but there is no calibration + sequence during init. And the device is configured for real + time playback mode (RTP mode). + DRV260X_ERM_MODE - Eccentric Rotating Mass mode (Rotary vibrator) + - library-sel - These are ROM based waveforms pre-programmed into the IC. + This should be set to set the library to use at power up. + (defined in include/dt-bindings/input/ti-drv260x.h) + DRV260X_LIB_A - Pre-programmed Library + DRV260X_LIB_B - Pre-programmed Library + DRV260X_LIB_C - Pre-programmed Library + DRV260X_LIB_D - Pre-programmed Library + DRV260X_LIB_E - Pre-programmed Library + DRV260X_LIB_F - Pre-programmed Library + +Optional properties: + - enable-gpio - gpio pin to enable/disable the device. + - vib_rated_voltage - The rated voltage of the actuator in millivolts. + If this is not set then the value will be defaulted to + 3.2 v. + - vib_overdrive_voltage - The overdrive voltage of the actuator in millivolts. + If this is not set then the value will be defaulted to + 3.2 v. +Example: + +drv2605l: drv2605l@5a { + compatible = "ti,drv2605l"; + reg = <0x5a>; + enable-gpio = < 28 GPIO_ACTIVE_HIGH>; + mode = ; + library-sel = ; + vib-rated-voltage = <3200>; + vib-overdriver-voltage = <3200>; +}; + +For more product information please see the link below: +http://www.ti.com/product/drv2605 diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 2ff4425..99f6762 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -676,4 +676,13 @@ config INPUT_SOC_BUTTON_ARRAY To compile this driver as a module, choose M here: the module will be called soc_button_array. +config INPUT_DRV260X_HAPTICS + tristate "TI DRV260X haptics support" + depends on INPUT && I2C + help + Say Y to enable support for the TI DRV260X haptics driver. + + To compile this driver as a module, choose M here: the + module will be called drv260x-haptics. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 4955ad3..d8ef3c7 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -64,3 +64,4 @@ obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND)+=
[Patch v3] input: drv260x: Add TI drv260x haptics driver
Add the TI drv260x haptics/vibrator driver. This device uses the input force feedback to produce a wave form to driver an ERM or LRA actuator device. The initial driver supports the devices real time playback mode. But the device has additional wave patterns in ROM. This functionality will be added in future patchsets. Product data sheet is located here: http://www.ti.com/product/drv2605 Signed-off-by: Dan Murphy dmur...@ti.com --- v3 - Updated binding doc, changed to memless device, updated input alloc to devm, removed mutex locking, add sanity checks for mode and library - https://patchwork.kernel.org/patch/4635421/ v2 - Fixed binding doc and patch headline - https://patchwork.kernel.org/patch/4619641/ .../devicetree/bindings/input/ti,drv260x.txt | 50 ++ drivers/input/misc/Kconfig |9 + drivers/input/misc/Makefile|1 + drivers/input/misc/drv260x.c | 515 include/dt-bindings/input/ti-drv260x.h | 30 ++ include/linux/input/drv260x.h | 181 +++ 6 files changed, 786 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/ti,drv260x.txt create mode 100644 drivers/input/misc/drv260x.c create mode 100644 include/dt-bindings/input/ti-drv260x.h create mode 100644 include/linux/input/drv260x.h diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt new file mode 100644 index 000..8e6970d --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt @@ -0,0 +1,50 @@ +Texas Instruments - drv260x Haptics driver family + +The drv260x family serial control bus communicates through I2C protocols + +Required properties: + - compatible - One of: + ti,drv2604 - DRV2604 + ti,drv2605 - DRV2605 + ti,drv2605l - DRV2605L + - reg - I2C slave address + - supply- Required supply regulators are: + vbat - battery voltage + - mode - Power up mode of the chip (defined in include/dt-bindings/input/ti-drv260x.h) + DRV260X_LRA_MODE - Linear Resonance Actuator mode (Piezoelectric) + DRV260X_LRA_NO_CAL_MODE - This is a LRA Mode but there is no calibration + sequence during init. And the device is configured for real + time playback mode (RTP mode). + DRV260X_ERM_MODE - Eccentric Rotating Mass mode (Rotary vibrator) + - library-sel - These are ROM based waveforms pre-programmed into the IC. + This should be set to set the library to use at power up. + (defined in include/dt-bindings/input/ti-drv260x.h) + DRV260X_LIB_A - Pre-programmed Library + DRV260X_LIB_B - Pre-programmed Library + DRV260X_LIB_C - Pre-programmed Library + DRV260X_LIB_D - Pre-programmed Library + DRV260X_LIB_E - Pre-programmed Library + DRV260X_LIB_F - Pre-programmed Library + +Optional properties: + - enable-gpio - gpio pin to enable/disable the device. + - vib_rated_voltage - The rated voltage of the actuator in millivolts. + If this is not set then the value will be defaulted to + 3.2 v. + - vib_overdrive_voltage - The overdrive voltage of the actuator in millivolts. + If this is not set then the value will be defaulted to + 3.2 v. +Example: + +drv2605l: drv2605l@5a { + compatible = ti,drv2605l; + reg = 0x5a; + enable-gpio = gpio1 28 GPIO_ACTIVE_HIGH; + mode = DRV260X_LRA_MODE; + library-sel = DRV260X_LIB_SEL_DEFAULT; + vib-rated-voltage = 3200; + vib-overdriver-voltage = 3200; +}; + +For more product information please see the link below: +http://www.ti.com/product/drv2605 diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 2ff4425..99f6762 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -676,4 +676,13 @@ config INPUT_SOC_BUTTON_ARRAY To compile this driver as a module, choose M here: the module will be called soc_button_array. +config INPUT_DRV260X_HAPTICS + tristate TI DRV260X haptics support + depends on INPUT I2C + help + Say Y to enable support for the TI DRV260X haptics driver. + + To compile this driver as a module, choose M here: the + module will be called drv260x-haptics. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 4955ad3..d8ef3c7 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -64,3 +64,4 @@ obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
Re: [Patch v3] input: drv260x: Add TI drv260x haptics driver
On Tue, Jul 29, 2014 at 02:32:27PM -0500, Dan Murphy wrote: Add the TI drv260x haptics/vibrator driver. This device uses the input force feedback to produce a wave form to driver an ERM or LRA actuator device. The initial driver supports the devices real time playback mode. But the device has additional wave patterns in ROM. This functionality will be added in future patchsets. Product data sheet is located here: http://www.ti.com/product/drv2605 Signed-off-by: Dan Murphy dmur...@ti.com --- v3 - Updated binding doc, changed to memless device, updated input alloc to devm, removed mutex locking, add sanity checks for mode and library - https://patchwork.kernel.org/patch/4635421/ v2 - Fixed binding doc and patch headline - https://patchwork.kernel.org/patch/4619641/ .../devicetree/bindings/input/ti,drv260x.txt | 50 ++ drivers/input/misc/Kconfig |9 + drivers/input/misc/Makefile|1 + drivers/input/misc/drv260x.c | 515 include/dt-bindings/input/ti-drv260x.h | 30 ++ include/linux/input/drv260x.h | 181 +++ 6 files changed, 786 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/ti,drv260x.txt create mode 100644 drivers/input/misc/drv260x.c create mode 100644 include/dt-bindings/input/ti-drv260x.h create mode 100644 include/linux/input/drv260x.h diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt new file mode 100644 index 000..8e6970d --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt @@ -0,0 +1,50 @@ +Texas Instruments - drv260x Haptics driver family + +The drv260x family serial control bus communicates through I2C protocols + +Required properties: + - compatible - One of: + ti,drv2604 - DRV2604 + ti,drv2605 - DRV2605 + ti,drv2605l - DRV2605L + - reg - I2C slave address + - supply- Required supply regulators are: + vbat - battery voltage + - mode - Power up mode of the chip (defined in include/dt-bindings/input/ti-drv260x.h) + DRV260X_LRA_MODE - Linear Resonance Actuator mode (Piezoelectric) + DRV260X_LRA_NO_CAL_MODE - This is a LRA Mode but there is no calibration + sequence during init. And the device is configured for real + time playback mode (RTP mode). + DRV260X_ERM_MODE - Eccentric Rotating Mass mode (Rotary vibrator) + - library-sel - These are ROM based waveforms pre-programmed into the IC. + This should be set to set the library to use at power up. + (defined in include/dt-bindings/input/ti-drv260x.h) + DRV260X_LIB_A - Pre-programmed Library + DRV260X_LIB_B - Pre-programmed Library + DRV260X_LIB_C - Pre-programmed Library + DRV260X_LIB_D - Pre-programmed Library + DRV260X_LIB_E - Pre-programmed Library + DRV260X_LIB_F - Pre-programmed Library + +Optional properties: + - enable-gpio - gpio pin to enable/disable the device. + - vib_rated_voltage - The rated voltage of the actuator in millivolts. + If this is not set then the value will be defaulted to + 3.2 v. + - vib_overdrive_voltage - The overdrive voltage of the actuator in millivolts. + If this is not set then the value will be defaulted to + 3.2 v. +Example: + +drv2605l: drv2605l@5a { + compatible = ti,drv2605l; + reg = 0x5a; + enable-gpio = gpio1 28 GPIO_ACTIVE_HIGH; + mode = DRV260X_LRA_MODE; + library-sel = DRV260X_LIB_SEL_DEFAULT; + vib-rated-voltage = 3200; + vib-overdriver-voltage = 3200; +}; + +For more product information please see the link below: +http://www.ti.com/product/drv2605 diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 2ff4425..99f6762 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -676,4 +676,13 @@ config INPUT_SOC_BUTTON_ARRAY To compile this driver as a module, choose M here: the module will be called soc_button_array. +config INPUT_DRV260X_HAPTICS + tristate TI DRV260X haptics support + depends on INPUT I2C + help + Say Y to enable support for the TI DRV260X haptics driver. + + To compile this driver as a module, choose M here: the + module will be called drv260x-haptics. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 4955ad3..d8ef3c7 100644 --- a/drivers/input/misc/Makefile +++
Re: [Patch v3] input: drv260x: Add TI drv260x haptics driver
Dmitry Thanks for the review. On 07/29/2014 03:01 PM, Dmitry Torokhov wrote: On Tue, Jul 29, 2014 at 02:32:27PM -0500, Dan Murphy wrote: Add the TI drv260x haptics/vibrator driver. This device uses the input force feedback to produce a wave form to driver an ERM or LRA actuator device. The initial driver supports the devices real time playback mode. But the device has additional wave patterns in ROM. This functionality will be added in future patchsets. Product data sheet is located here: http://www.ti.com/product/drv2605 Signed-off-by: Dan Murphy dmur...@ti.com --- v3 - Updated binding doc, changed to memless device, updated input alloc to devm, removed mutex locking, add sanity checks for mode and library - https://patchwork.kernel.org/patch/4635421/ v2 - Fixed binding doc and patch headline - https://patchwork.kernel.org/patch/4619641/ .../devicetree/bindings/input/ti,drv260x.txt | 50 ++ drivers/input/misc/Kconfig |9 + drivers/input/misc/Makefile|1 + drivers/input/misc/drv260x.c | 515 include/dt-bindings/input/ti-drv260x.h | 30 ++ include/linux/input/drv260x.h | 181 +++ 6 files changed, 786 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/ti,drv260x.txt create mode 100644 drivers/input/misc/drv260x.c create mode 100644 include/dt-bindings/input/ti-drv260x.h create mode 100644 include/linux/input/drv260x.h diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt new file mode 100644 index 000..8e6970d --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt @@ -0,0 +1,50 @@ +Texas Instruments - drv260x Haptics driver family + +The drv260x family serial control bus communicates through I2C protocols + +Required properties: +- compatible - One of: +ti,drv2604 - DRV2604 +ti,drv2605 - DRV2605 +ti,drv2605l - DRV2605L +- reg - I2C slave address +- supply- Required supply regulators are: +vbat - battery voltage +- mode - Power up mode of the chip (defined in include/dt-bindings/input/ti-drv260x.h) +DRV260X_LRA_MODE - Linear Resonance Actuator mode (Piezoelectric) +DRV260X_LRA_NO_CAL_MODE - This is a LRA Mode but there is no calibration +sequence during init. And the device is configured for real +time playback mode (RTP mode). +DRV260X_ERM_MODE - Eccentric Rotating Mass mode (Rotary vibrator) +- library-sel - These are ROM based waveforms pre-programmed into the IC. +This should be set to set the library to use at power up. +(defined in include/dt-bindings/input/ti-drv260x.h) +DRV260X_LIB_A - Pre-programmed Library +DRV260X_LIB_B - Pre-programmed Library +DRV260X_LIB_C - Pre-programmed Library +DRV260X_LIB_D - Pre-programmed Library +DRV260X_LIB_E - Pre-programmed Library +DRV260X_LIB_F - Pre-programmed Library + +Optional properties: +- enable-gpio - gpio pin to enable/disable the device. +- vib_rated_voltage - The rated voltage of the actuator in millivolts. + If this is not set then the value will be defaulted to + 3.2 v. +- vib_overdrive_voltage - The overdrive voltage of the actuator in millivolts. + If this is not set then the value will be defaulted to + 3.2 v. +Example: + +drv2605l: drv2605l@5a { +compatible = ti,drv2605l; +reg = 0x5a; +enable-gpio = gpio1 28 GPIO_ACTIVE_HIGH; +mode = DRV260X_LRA_MODE; +library-sel = DRV260X_LIB_SEL_DEFAULT; +vib-rated-voltage = 3200; +vib-overdriver-voltage = 3200; +}; + +For more product information please see the link below: +http://www.ti.com/product/drv2605 diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 2ff4425..99f6762 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -676,4 +676,13 @@ config INPUT_SOC_BUTTON_ARRAY To compile this driver as a module, choose M here: the module will be called soc_button_array. +config INPUT_DRV260X_HAPTICS +tristate TI DRV260X haptics support +depends on INPUT I2C +help + Say Y to enable support for the TI DRV260X haptics driver. + + To compile this driver as a module, choose M here: the + module will be called drv260x-haptics. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 4955ad3..d8ef3c7 100644 --- a/drivers/input/misc/Makefile