Re: [PATCH] ARM: S3C24XX: Add WIZnet W5300E01-ARM board support
2012/9/3 Sylwester Nawrocki : > Hi, > > On 09/03/2012 09:56 AM, Vasily Khoruzhick wrote: >>> +static void __init w5300e01_init(void) >>> +{ >>> + s3c_nand_set_platdata(_nand_info); >>> + platform_add_devices(w5300e01_devices, >>> ARRAY_SIZE(w5300e01_devices)); >>> + >>> + /* W5300 interrupt pin. */ >>> + s3c2410_gpio_cfgpin(S3C2410_GPF(0), S3C2410_GPIO_IRQ); >>> + >>> + s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT); >>> + s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT); >>> + s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT); >>> + s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT); >>> + >>> + s3c2410_gpio_setpin(S3C2410_GPF(0), 1); >>> + s3c2410_gpio_setpin(S3C2410_GPF(4), 1); >>> + s3c2410_gpio_setpin(S3C2410_GPF(5), 1); >>> + s3c2410_gpio_setpin(S3C2410_GPF(6), 1); >>> + s3c2410_gpio_setpin(S3C2410_GPF(7), 1); >>> + >> >> Please use gpiolib API, legacy s3c2410_gpio_* API will be removed soon. > > Right, you'll find some information about this in > Documentation/arm/Samsung-S3C24XX/GPIO.txt. > > These links may be useful as well: > http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg11985.html > http://www.spinics.net/lists/arm-kernel/msg192119.html > > -- > > Regards, > Sylwester Thank you for the feedback. I will rewrite the gpio functions and propose the new patch soon. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH] ARM: S3C24XX: Add WIZnet W5300E01-ARM board support
Hi, On 09/03/2012 09:56 AM, Vasily Khoruzhick wrote: >> +static void __init w5300e01_init(void) >> +{ >> + s3c_nand_set_platdata(_nand_info); >> + platform_add_devices(w5300e01_devices, ARRAY_SIZE(w5300e01_devices)); >> + >> + /* W5300 interrupt pin. */ >> + s3c2410_gpio_cfgpin(S3C2410_GPF(0), S3C2410_GPIO_IRQ); >> + >> + s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT); >> + s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT); >> + s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT); >> + s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT); >> + >> + s3c2410_gpio_setpin(S3C2410_GPF(0), 1); >> + s3c2410_gpio_setpin(S3C2410_GPF(4), 1); >> + s3c2410_gpio_setpin(S3C2410_GPF(5), 1); >> + s3c2410_gpio_setpin(S3C2410_GPF(6), 1); >> + s3c2410_gpio_setpin(S3C2410_GPF(7), 1); >> + > > Please use gpiolib API, legacy s3c2410_gpio_* API will be removed soon. Right, you'll find some information about this in Documentation/arm/Samsung-S3C24XX/GPIO.txt. These links may be useful as well: http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg11985.html http://www.spinics.net/lists/arm-kernel/msg192119.html -- Regards, Sylwester -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH] ARM: S3C24XX: Add WIZnet W5300E01-ARM board support
On Mon, Sep 3, 2012 at 9:20 AM, Taehun Kim wrote: > This patch adds WIZnet W5300E01 board. I tested this code in the board. > Please review this patch and apply it if do not have any problems. Hi, > Taehun kim > > Signed-off-by: Taehun Kim > --- > arch/arm/mach-s3c24xx/Kconfig |5 + > arch/arm/mach-s3c24xx/Makefile|1 + > arch/arm/mach-s3c24xx/mach-w5300e01.c | 186 > + > 3 files changed, 192 insertions(+) > create mode 100644 arch/arm/mach-s3c24xx/mach-w5300e01.c > > diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig > index d56b0f7..94b60ca 100644 > --- a/arch/arm/mach-s3c24xx/Kconfig > +++ b/arch/arm/mach-s3c24xx/Kconfig > @@ -248,6 +248,11 @@ config MACH_VR1000 > help > Say Y here if you are using the Thorcom VR1000 board. > > +config MACH_W5300E01 > + bool "WIZnet W5300E01-ARM Board" > + help > + Say Y here if you are using the Wiznet W5300E01-ARM board. > + > endif # CPU_S3C2410 > > config S3C2412_PM_SLEEP > diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile > index 0ab6ab1..fc1a89e 100644 > --- a/arch/arm/mach-s3c24xx/Makefile > +++ b/arch/arm/mach-s3c24xx/Makefile > @@ -61,6 +61,7 @@ obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o > obj-$(CONFIG_ARCH_SMDK2410)+= mach-smdk2410.o > obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o > obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o > +obj-$(CONFIG_MACH_W5300E01)+= mach-w5300e01.o > > obj-$(CONFIG_MACH_JIVE)+= mach-jive.o > obj-$(CONFIG_MACH_SMDK2413)+= mach-smdk2413.o > diff --git a/arch/arm/mach-s3c24xx/mach-w5300e01.c > b/arch/arm/mach-s3c24xx/mach-w5300e01.c > new file mode 100644 > index 000..5ed79f5 > --- /dev/null > +++ b/arch/arm/mach-s3c24xx/mach-w5300e01.c > @@ -0,0 +1,186 @@ > +/* linux/arch/arm/mach-s3c24xx/mach-w5300e01.c > + * > + * Copyright (c) 2012 Taehun Kim > + * > + * For product information, visit http://www.wiznet.co.kr/ > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * @History: > + * derived from linux/arch/arm/mach-s3c24xx/mach-bast.c, written by > + * Ben Dooks > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include > +#include > +#include > +#include > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +static struct map_desc w5300e01_iodesc[] __initdata = { > + /* Character LCD register map. */ > + { 0xf800, __phys_to_pfn(S3C2410_CS3), SZ_1M, MT_DEVICE } > +}; > + > +#define UCON S3C2410_UCON_DEFAULT > +#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) > +#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) > + > +static struct s3c2410_uartcfg w5300e01_uartcfgs[] __initdata = { > + [0] = { > + .hwport = 0, > + .flags = 0, > + .ucon= UCON, > + .ulcon = ULCON, > + .ufcon = UFCON, > + }, > + [1] = { > + .hwport = 1, > + .flags = 0, > + .ucon= UCON, > + .ulcon = ULCON, > + .ufcon = UFCON, > + }, > + [2] = { > + .hwport = 2, > + .flags = 0, > + .ucon= UCON, > + .ulcon = ULCON, > + .ufcon = UFCON, > + } > +}; > + > +static struct mtd_partition w5300e01_mtd_partitions[] = { > + [0] = { > + .name = "Bootloader", > + .size = 0x2, > + .offset = 0, > + .mask_flags = MTD_WRITEABLE, > + }, > + [1] = { > + .name = "Boot Param", > + .size = 0x2, > + .offset = MTDPART_OFS_APPEND, > + }, > + [2] = { > + .name = "Kernel", > + .size = 0x3C, > + .offset = MTDPART_OFS_APPEND, > + }, > + [3] = { > + .name = "Ramdisk", > + .size = 0x100, > + .offset = MTDPART_OFS_APPEND, > + }, > + [4] = { > + .name = "JFFS2 FileSystem", > + .size = MTDPART_SIZ_FULL, > + .offset = MTDPART_OFS_APPEND, > + }, > +}; > + > +static struct resource w5300_resources[] = { > + [0] = { > + .start = S3C2410_CS2, > + .end= S3C2410_CS2 + SZ_1M, > + .flags = IORESOURCE_MEM, > + }, > + [1] = { > +
[PATCH] ARM: S3C24XX: Add WIZnet W5300E01-ARM board support
This patch adds WIZnet W5300E01 board. I tested this code in the board. Please review this patch and apply it if do not have any problems. Taehun kim Signed-off-by: Taehun Kim --- arch/arm/mach-s3c24xx/Kconfig |5 + arch/arm/mach-s3c24xx/Makefile|1 + arch/arm/mach-s3c24xx/mach-w5300e01.c | 186 + 3 files changed, 192 insertions(+) create mode 100644 arch/arm/mach-s3c24xx/mach-w5300e01.c diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index d56b0f7..94b60ca 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -248,6 +248,11 @@ config MACH_VR1000 help Say Y here if you are using the Thorcom VR1000 board. +config MACH_W5300E01 + bool "WIZnet W5300E01-ARM Board" + help + Say Y here if you are using the Wiznet W5300E01-ARM board. + endif # CPU_S3C2410 config S3C2412_PM_SLEEP diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 0ab6ab1..fc1a89e 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -61,6 +61,7 @@ obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o obj-$(CONFIG_ARCH_SMDK2410)+= mach-smdk2410.o obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o +obj-$(CONFIG_MACH_W5300E01)+= mach-w5300e01.o obj-$(CONFIG_MACH_JIVE)+= mach-jive.o obj-$(CONFIG_MACH_SMDK2413)+= mach-smdk2413.o diff --git a/arch/arm/mach-s3c24xx/mach-w5300e01.c b/arch/arm/mach-s3c24xx/mach-w5300e01.c new file mode 100644 index 000..5ed79f5 --- /dev/null +++ b/arch/arm/mach-s3c24xx/mach-w5300e01.c @@ -0,0 +1,186 @@ +/* linux/arch/arm/mach-s3c24xx/mach-w5300e01.c + * + * Copyright (c) 2012 Taehun Kim + * + * For product information, visit http://www.wiznet.co.kr/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * @History: + * derived from linux/arch/arm/mach-s3c24xx/mach-bast.c, written by + * Ben Dooks + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +static struct map_desc w5300e01_iodesc[] __initdata = { + /* Character LCD register map. */ + { 0xf800, __phys_to_pfn(S3C2410_CS3), SZ_1M, MT_DEVICE } +}; + +#define UCON S3C2410_UCON_DEFAULT +#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) +#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) + +static struct s3c2410_uartcfg w5300e01_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon= UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon= UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon= UCON, + .ulcon = ULCON, + .ufcon = UFCON, + } +}; + +static struct mtd_partition w5300e01_mtd_partitions[] = { + [0] = { + .name = "Bootloader", + .size = 0x2, + .offset = 0, + .mask_flags = MTD_WRITEABLE, + }, + [1] = { + .name = "Boot Param", + .size = 0x2, + .offset = MTDPART_OFS_APPEND, + }, + [2] = { + .name = "Kernel", + .size = 0x3C, + .offset = MTDPART_OFS_APPEND, + }, + [3] = { + .name = "Ramdisk", + .size = 0x100, + .offset = MTDPART_OFS_APPEND, + }, + [4] = { + .name = "JFFS2 FileSystem", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, +}; + +static struct resource w5300_resources[] = { + [0] = { + .start = S3C2410_CS2, + .end= S3C2410_CS2 + SZ_1M, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_EINT0, + .end= IRQ_EINT0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device w5300_device = { + .name = "w5300", + .num_resources = ARRAY_SIZE(w5300_resources), + .resource = w5300_resources, +}; + +static struct s3c2410_nand_set w5300e01_nand_sets[] = { +
[PATCH] ARM: S3C24XX: Add WIZnet W5300E01-ARM board support
This patch adds WIZnet W5300E01 board. I tested this code in the board. Please review this patch and apply it if do not have any problems. Taehun kim Signed-off-by: Taehun Kim kth3...@gmail.com --- arch/arm/mach-s3c24xx/Kconfig |5 + arch/arm/mach-s3c24xx/Makefile|1 + arch/arm/mach-s3c24xx/mach-w5300e01.c | 186 + 3 files changed, 192 insertions(+) create mode 100644 arch/arm/mach-s3c24xx/mach-w5300e01.c diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index d56b0f7..94b60ca 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -248,6 +248,11 @@ config MACH_VR1000 help Say Y here if you are using the Thorcom VR1000 board. +config MACH_W5300E01 + bool WIZnet W5300E01-ARM Board + help + Say Y here if you are using the Wiznet W5300E01-ARM board. + endif # CPU_S3C2410 config S3C2412_PM_SLEEP diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 0ab6ab1..fc1a89e 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -61,6 +61,7 @@ obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o obj-$(CONFIG_ARCH_SMDK2410)+= mach-smdk2410.o obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o +obj-$(CONFIG_MACH_W5300E01)+= mach-w5300e01.o obj-$(CONFIG_MACH_JIVE)+= mach-jive.o obj-$(CONFIG_MACH_SMDK2413)+= mach-smdk2413.o diff --git a/arch/arm/mach-s3c24xx/mach-w5300e01.c b/arch/arm/mach-s3c24xx/mach-w5300e01.c new file mode 100644 index 000..5ed79f5 --- /dev/null +++ b/arch/arm/mach-s3c24xx/mach-w5300e01.c @@ -0,0 +1,186 @@ +/* linux/arch/arm/mach-s3c24xx/mach-w5300e01.c + * + * Copyright (c) 2012 Taehun Kim kth3...@gmail.com + * + * For product information, visit http://www.wiznet.co.kr/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * @History: + * derived from linux/arch/arm/mach-s3c24xx/mach-bast.c, written by + * Ben Dooks b...@simtec.co.uk + */ + +#include linux/kernel.h +#include linux/types.h +#include linux/interrupt.h +#include linux/list.h +#include linux/timer.h +#include linux/init.h +#include linux/serial_core.h +#include linux/platform_device.h +#include linux/gpio.h +#include linux/io.h +#include linux/mtd/mtd.h +#include linux/mtd/nand.h +#include linux/mtd/map.h +#include linux/mtd/partitions.h + +#include asm/mach/arch.h +#include asm/mach/map.h +#include asm/mach/irq.h +#include asm/mach-types.h + +#include mach/regs-gpio.h +#include plat/gpio-cfg.h +#include plat/cpu.h +#include plat/devs.h +#include plat/regs-serial.h +#include plat/nand.h +#include plat/pm.h + +static struct map_desc w5300e01_iodesc[] __initdata = { + /* Character LCD register map. */ + { 0xf800, __phys_to_pfn(S3C2410_CS3), SZ_1M, MT_DEVICE } +}; + +#define UCON S3C2410_UCON_DEFAULT +#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) +#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) + +static struct s3c2410_uartcfg w5300e01_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon= UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon= UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon= UCON, + .ulcon = ULCON, + .ufcon = UFCON, + } +}; + +static struct mtd_partition w5300e01_mtd_partitions[] = { + [0] = { + .name = Bootloader, + .size = 0x2, + .offset = 0, + .mask_flags = MTD_WRITEABLE, + }, + [1] = { + .name = Boot Param, + .size = 0x2, + .offset = MTDPART_OFS_APPEND, + }, + [2] = { + .name = Kernel, + .size = 0x3C, + .offset = MTDPART_OFS_APPEND, + }, + [3] = { + .name = Ramdisk, + .size = 0x100, + .offset = MTDPART_OFS_APPEND, + }, + [4] = { + .name = JFFS2 FileSystem, + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, +}; + +static struct resource w5300_resources[] = { + [0] = { + .start = S3C2410_CS2, + .end= S3C2410_CS2 + SZ_1M, + .flags = IORESOURCE_MEM, + },
Re: [PATCH] ARM: S3C24XX: Add WIZnet W5300E01-ARM board support
On Mon, Sep 3, 2012 at 9:20 AM, Taehun Kim kth3...@gmail.com wrote: This patch adds WIZnet W5300E01 board. I tested this code in the board. Please review this patch and apply it if do not have any problems. Hi, Taehun kim Signed-off-by: Taehun Kim kth3...@gmail.com --- arch/arm/mach-s3c24xx/Kconfig |5 + arch/arm/mach-s3c24xx/Makefile|1 + arch/arm/mach-s3c24xx/mach-w5300e01.c | 186 + 3 files changed, 192 insertions(+) create mode 100644 arch/arm/mach-s3c24xx/mach-w5300e01.c diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index d56b0f7..94b60ca 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -248,6 +248,11 @@ config MACH_VR1000 help Say Y here if you are using the Thorcom VR1000 board. +config MACH_W5300E01 + bool WIZnet W5300E01-ARM Board + help + Say Y here if you are using the Wiznet W5300E01-ARM board. + endif # CPU_S3C2410 config S3C2412_PM_SLEEP diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 0ab6ab1..fc1a89e 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -61,6 +61,7 @@ obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o obj-$(CONFIG_ARCH_SMDK2410)+= mach-smdk2410.o obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o +obj-$(CONFIG_MACH_W5300E01)+= mach-w5300e01.o obj-$(CONFIG_MACH_JIVE)+= mach-jive.o obj-$(CONFIG_MACH_SMDK2413)+= mach-smdk2413.o diff --git a/arch/arm/mach-s3c24xx/mach-w5300e01.c b/arch/arm/mach-s3c24xx/mach-w5300e01.c new file mode 100644 index 000..5ed79f5 --- /dev/null +++ b/arch/arm/mach-s3c24xx/mach-w5300e01.c @@ -0,0 +1,186 @@ +/* linux/arch/arm/mach-s3c24xx/mach-w5300e01.c + * + * Copyright (c) 2012 Taehun Kim kth3...@gmail.com + * + * For product information, visit http://www.wiznet.co.kr/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * @History: + * derived from linux/arch/arm/mach-s3c24xx/mach-bast.c, written by + * Ben Dooks b...@simtec.co.uk + */ + +#include linux/kernel.h +#include linux/types.h +#include linux/interrupt.h +#include linux/list.h +#include linux/timer.h +#include linux/init.h +#include linux/serial_core.h +#include linux/platform_device.h +#include linux/gpio.h +#include linux/io.h +#include linux/mtd/mtd.h +#include linux/mtd/nand.h +#include linux/mtd/map.h +#include linux/mtd/partitions.h + +#include asm/mach/arch.h +#include asm/mach/map.h +#include asm/mach/irq.h +#include asm/mach-types.h + +#include mach/regs-gpio.h +#include plat/gpio-cfg.h +#include plat/cpu.h +#include plat/devs.h +#include plat/regs-serial.h +#include plat/nand.h +#include plat/pm.h + +static struct map_desc w5300e01_iodesc[] __initdata = { + /* Character LCD register map. */ + { 0xf800, __phys_to_pfn(S3C2410_CS3), SZ_1M, MT_DEVICE } +}; + +#define UCON S3C2410_UCON_DEFAULT +#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) +#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) + +static struct s3c2410_uartcfg w5300e01_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon= UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon= UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon= UCON, + .ulcon = ULCON, + .ufcon = UFCON, + } +}; + +static struct mtd_partition w5300e01_mtd_partitions[] = { + [0] = { + .name = Bootloader, + .size = 0x2, + .offset = 0, + .mask_flags = MTD_WRITEABLE, + }, + [1] = { + .name = Boot Param, + .size = 0x2, + .offset = MTDPART_OFS_APPEND, + }, + [2] = { + .name = Kernel, + .size = 0x3C, + .offset = MTDPART_OFS_APPEND, + }, + [3] = { + .name = Ramdisk, + .size = 0x100, + .offset = MTDPART_OFS_APPEND, + }, + [4] = { + .name = JFFS2 FileSystem, + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND,
Re: [PATCH] ARM: S3C24XX: Add WIZnet W5300E01-ARM board support
Hi, On 09/03/2012 09:56 AM, Vasily Khoruzhick wrote: +static void __init w5300e01_init(void) +{ + s3c_nand_set_platdata(w5300e01_nand_info); + platform_add_devices(w5300e01_devices, ARRAY_SIZE(w5300e01_devices)); + + /* W5300 interrupt pin. */ + s3c2410_gpio_cfgpin(S3C2410_GPF(0), S3C2410_GPIO_IRQ); + + s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT); + s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT); + s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT); + s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT); + + s3c2410_gpio_setpin(S3C2410_GPF(0), 1); + s3c2410_gpio_setpin(S3C2410_GPF(4), 1); + s3c2410_gpio_setpin(S3C2410_GPF(5), 1); + s3c2410_gpio_setpin(S3C2410_GPF(6), 1); + s3c2410_gpio_setpin(S3C2410_GPF(7), 1); + Please use gpiolib API, legacy s3c2410_gpio_* API will be removed soon. Right, you'll find some information about this in Documentation/arm/Samsung-S3C24XX/GPIO.txt. These links may be useful as well: http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg11985.html http://www.spinics.net/lists/arm-kernel/msg192119.html -- Regards, Sylwester -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH] ARM: S3C24XX: Add WIZnet W5300E01-ARM board support
2012/9/3 Sylwester Nawrocki s.nawro...@samsung.com: Hi, On 09/03/2012 09:56 AM, Vasily Khoruzhick wrote: +static void __init w5300e01_init(void) +{ + s3c_nand_set_platdata(w5300e01_nand_info); + platform_add_devices(w5300e01_devices, ARRAY_SIZE(w5300e01_devices)); + + /* W5300 interrupt pin. */ + s3c2410_gpio_cfgpin(S3C2410_GPF(0), S3C2410_GPIO_IRQ); + + s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT); + s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT); + s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT); + s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT); + + s3c2410_gpio_setpin(S3C2410_GPF(0), 1); + s3c2410_gpio_setpin(S3C2410_GPF(4), 1); + s3c2410_gpio_setpin(S3C2410_GPF(5), 1); + s3c2410_gpio_setpin(S3C2410_GPF(6), 1); + s3c2410_gpio_setpin(S3C2410_GPF(7), 1); + Please use gpiolib API, legacy s3c2410_gpio_* API will be removed soon. Right, you'll find some information about this in Documentation/arm/Samsung-S3C24XX/GPIO.txt. These links may be useful as well: http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg11985.html http://www.spinics.net/lists/arm-kernel/msg192119.html -- Regards, Sylwester Thank you for the feedback. I will rewrite the gpio functions and propose the new patch soon. -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/