Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On Wed, Feb 26, 2014 at 05:50:55PM +, Sebastian Capella wrote: > Quoting Lorenzo Pieralisi (2014-02-26 02:24:27) > > On Tue, Feb 25, 2014 at 05:55:31PM +, Sebastian Capella wrote: > > > > Please add: > > > > "swsusp_save() is executed in the suspend finisher so that the CPU context > > pointer and memory are part of the saved image, which is required by the > > resume kernel image to restart execution from swsusp_arch_suspend()" > > > > > * soft_restart is not technically needed, but is used > > > * to get success returned from cpu_suspend. > > > * After resume, the hibernation snapshot is written out. > > > > "When soft reboot completes, the hibernation snapshot is written out." > > > > Resume is confusing since this code is resuming twice :D on image saving > > and on kernel image restoration. > > Thanks Lorenzo! > > Here's what I've got. > > /* > * Snapshot kernel memory and reset the system. > * > * swsusp_save() is executed in the suspend finisher so that the CPU > * context pointer and memory are part of the saved image, which is > * required by the resume kernel image to restart execution from > * swsusp_arch_suspend(). > * > * soft_restart is not technically needed, but is used to get success > * returned from cpu_suspend. > * > * When soft reboot completes, the hibernation snapshot is > * written out. > */ > > Does this look ok? I'll prepare a v4 patchset. Yes it does, I will wait and review v4 then. Thank you, Lorenzo -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On Tue, Feb 25, 2014 at 05:55:31PM +, Sebastian Capella wrote:
> Quoting Lorenzo Pieralisi (2014-02-25 03:32:51)
> > On Sun, Feb 23, 2014 at 08:02:08PM +, Sebastian Capella wrote:
> > > I'll go with leaving the soft_restart as is unless someone feels
> > > strongly against.
> >
> > Leaving it as it is is fine for now, but should be commented, because that's
> > not clear why it is needed by just reading the code.
>
> Hi Lorenzo,
>
> How is something like this?
>
> /*
> * Snapshot kernel memory and reset the system.
Please add:
"swsusp_save() is executed in the suspend finisher so that the CPU context
pointer and memory are part of the saved image, which is required by the
resume kernel image to restart execution from swsusp_arch_suspend()"
> * soft_restart is not technically needed, but is used
> * to get success returned from cpu_suspend.
> * After resume, the hibernation snapshot is written out.
"When soft reboot completes, the hibernation snapshot is written out."
Resume is confusing since this code is resuming twice :D on image saving
and on kernel image restoration.
Lorenzo
> */
> static int notrace __swsusp_arch_save_image(unsigned long unused)
> {
> int ret;
>
> ret = swsusp_save();
> if (ret == 0)
> soft_restart(virt_to_phys(cpu_resume));
> return ret;
> }
>
> Thanks again for all of the feedback!
>
> Sebastian
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On Tue, Feb 25, 2014 at 05:55:31PM +, Sebastian Capella wrote:
Quoting Lorenzo Pieralisi (2014-02-25 03:32:51)
On Sun, Feb 23, 2014 at 08:02:08PM +, Sebastian Capella wrote:
I'll go with leaving the soft_restart as is unless someone feels
strongly against.
Leaving it as it is is fine for now, but should be commented, because that's
not clear why it is needed by just reading the code.
Hi Lorenzo,
How is something like this?
/*
* Snapshot kernel memory and reset the system.
Please add:
swsusp_save() is executed in the suspend finisher so that the CPU context
pointer and memory are part of the saved image, which is required by the
resume kernel image to restart execution from swsusp_arch_suspend()
* soft_restart is not technically needed, but is used
* to get success returned from cpu_suspend.
* After resume, the hibernation snapshot is written out.
When soft reboot completes, the hibernation snapshot is written out.
Resume is confusing since this code is resuming twice :D on image saving
and on kernel image restoration.
Lorenzo
*/
static int notrace __swsusp_arch_save_image(unsigned long unused)
{
int ret;
ret = swsusp_save();
if (ret == 0)
soft_restart(virt_to_phys(cpu_resume));
return ret;
}
Thanks again for all of the feedback!
Sebastian
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On Wed, Feb 26, 2014 at 05:50:55PM +, Sebastian Capella wrote: Quoting Lorenzo Pieralisi (2014-02-26 02:24:27) On Tue, Feb 25, 2014 at 05:55:31PM +, Sebastian Capella wrote: Please add: swsusp_save() is executed in the suspend finisher so that the CPU context pointer and memory are part of the saved image, which is required by the resume kernel image to restart execution from swsusp_arch_suspend() * soft_restart is not technically needed, but is used * to get success returned from cpu_suspend. * After resume, the hibernation snapshot is written out. When soft reboot completes, the hibernation snapshot is written out. Resume is confusing since this code is resuming twice :D on image saving and on kernel image restoration. Thanks Lorenzo! Here's what I've got. /* * Snapshot kernel memory and reset the system. * * swsusp_save() is executed in the suspend finisher so that the CPU * context pointer and memory are part of the saved image, which is * required by the resume kernel image to restart execution from * swsusp_arch_suspend(). * * soft_restart is not technically needed, but is used to get success * returned from cpu_suspend. * * When soft reboot completes, the hibernation snapshot is * written out. */ Does this look ok? I'll prepare a v4 patchset. Yes it does, I will wait and review v4 then. Thank you, Lorenzo -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On Sun, Feb 23, 2014 at 08:02:08PM +, Sebastian Capella wrote:
> Quoting Lorenzo Pieralisi (2014-02-22 04:09:10)
> > On Sat, Feb 22, 2014 at 10:38:40AM +, Russell King - ARM Linux wrote:
> > > On Wed, Feb 19, 2014 at 04:12:54PM +, Lorenzo Pieralisi wrote:
> > > > On Wed, Feb 19, 2014 at 01:52:09AM +, Sebastian Capella wrote:
> > > > > +/*
> > > > > + * Snapshot kernel memory and reset the system.
> > > > > + * After resume, the hibernation snapshot is written out.
> > > > > + */
> > > > > +static int notrace __swsusp_arch_save_image(unsigned long unused)
> > > > > +{
> > > > > + int ret;
> > > > > +
> > > > > + ret = swsusp_save();
> > > > > + if (ret == 0)
> > > > > + soft_restart(virt_to_phys(cpu_resume));
> > > >
> > > > By the time the suspend finisher (ie this function) is run, the
> > > > processor state has been saved and I think that's all you have to do,
> > > > function can just return after calling swsusp_save(), unless I am
> > > > missing
> > > > something.
> > > >
> > > > I do not understand why a soft_restart is required here. On a side note,
> > > > finisher is called with irqs disabled so, since you added a function for
> > > > soft restart noirq, it should be used, if needed, but I have to
> > > > understand
> > > > why in the first place.
> > >
> > > It's required because you can't just return from the finisher. A normal
> > > return from the finisher will always be interpreted as an abort rather
> > > than success (because the state has to be unwound.)
> > >
> > > This is the only way to get a zero return from cpu_suspend().
> >
> > Yes, that's the only reason why this code is jumping to cpu_resume, since
> > all it is needed is to snapshot the CPU context and by the time the
> > finisher is called that's done. Wanted to say that soft reboot is not
> > useful (cache flushing and resume with MMU off), but what you are saying
> > is correct. We might be saving swsusp_save return value in a global
> > variable and just return from the finisher, but that's horrible and
> > given the amount of time it takes to snapshot the image to disk the
> > cost of this soft reboot will be dwarfed by that.
> >
> > I wanted to ask and clarify why the code was written like this though, given
> > its complexity.
>
> We could also return a constant > 1. __cpu_suspend code will replace
> a 0 return with 1 for paths exiting suspend, but will not change return
> values != 0.
Yes, we could but that's an API abuse and as I mentioned that soft_reboot is
not a massive deal, should not block your series. It is certainly
something to be benchmarked though since wiping the entire cache hierarchy
for nothing is not nifty.
> cpu_suspend_abort:
> ldmia sp!, {r1 - r3} @ pop phys pgd, virt SP, phys
> resume fn
> teq r0, #0
> moveq r0, #1 @ force non-zero value
> mov sp, r2
> ldmfd sp!, {r4 - r11, pc}
>
> We could take advantage of that if we wanted, but Lorenzo pointed out
> also that the relative benefit is very low since the cost of
> resuming is >> soft_restart.
The cost of writing to disk, to be precise. Again, this should be benchmarked.
> I'll go with leaving the soft_restart as is unless someone feels
> strongly against.
Leaving it as it is is fine for now, but should be commented, because that's
not clear why it is needed by just reading the code.
Thanks,
Lorenzo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On Sun, Feb 23, 2014 at 08:02:08PM +, Sebastian Capella wrote:
Quoting Lorenzo Pieralisi (2014-02-22 04:09:10)
On Sat, Feb 22, 2014 at 10:38:40AM +, Russell King - ARM Linux wrote:
On Wed, Feb 19, 2014 at 04:12:54PM +, Lorenzo Pieralisi wrote:
On Wed, Feb 19, 2014 at 01:52:09AM +, Sebastian Capella wrote:
+/*
+ * Snapshot kernel memory and reset the system.
+ * After resume, the hibernation snapshot is written out.
+ */
+static int notrace __swsusp_arch_save_image(unsigned long unused)
+{
+ int ret;
+
+ ret = swsusp_save();
+ if (ret == 0)
+ soft_restart(virt_to_phys(cpu_resume));
By the time the suspend finisher (ie this function) is run, the
processor state has been saved and I think that's all you have to do,
function can just return after calling swsusp_save(), unless I am
missing
something.
I do not understand why a soft_restart is required here. On a side note,
finisher is called with irqs disabled so, since you added a function for
soft restart noirq, it should be used, if needed, but I have to
understand
why in the first place.
It's required because you can't just return from the finisher. A normal
return from the finisher will always be interpreted as an abort rather
than success (because the state has to be unwound.)
This is the only way to get a zero return from cpu_suspend().
Yes, that's the only reason why this code is jumping to cpu_resume, since
all it is needed is to snapshot the CPU context and by the time the
finisher is called that's done. Wanted to say that soft reboot is not
useful (cache flushing and resume with MMU off), but what you are saying
is correct. We might be saving swsusp_save return value in a global
variable and just return from the finisher, but that's horrible and
given the amount of time it takes to snapshot the image to disk the
cost of this soft reboot will be dwarfed by that.
I wanted to ask and clarify why the code was written like this though, given
its complexity.
We could also return a constant 1. __cpu_suspend code will replace
a 0 return with 1 for paths exiting suspend, but will not change return
values != 0.
Yes, we could but that's an API abuse and as I mentioned that soft_reboot is
not a massive deal, should not block your series. It is certainly
something to be benchmarked though since wiping the entire cache hierarchy
for nothing is not nifty.
cpu_suspend_abort:
ldmia sp!, {r1 - r3} @ pop phys pgd, virt SP, phys
resume fn
teq r0, #0
moveq r0, #1 @ force non-zero value
mov sp, r2
ldmfd sp!, {r4 - r11, pc}
We could take advantage of that if we wanted, but Lorenzo pointed out
also that the relative benefit is very low since the cost of
resuming is soft_restart.
The cost of writing to disk, to be precise. Again, this should be benchmarked.
I'll go with leaving the soft_restart as is unless someone feels
strongly against.
Leaving it as it is is fine for now, but should be commented, because that's
not clear why it is needed by just reading the code.
Thanks,
Lorenzo
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
Quoting Lorenzo Pieralisi (2014-02-22 04:09:10)
> On Sat, Feb 22, 2014 at 10:38:40AM +, Russell King - ARM Linux wrote:
> > On Wed, Feb 19, 2014 at 04:12:54PM +, Lorenzo Pieralisi wrote:
> > > On Wed, Feb 19, 2014 at 01:52:09AM +, Sebastian Capella wrote:
> > > > +/*
> > > > + * Snapshot kernel memory and reset the system.
> > > > + * After resume, the hibernation snapshot is written out.
> > > > + */
> > > > +static int notrace __swsusp_arch_save_image(unsigned long unused)
> > > > +{
> > > > + int ret;
> > > > +
> > > > + ret = swsusp_save();
> > > > + if (ret == 0)
> > > > + soft_restart(virt_to_phys(cpu_resume));
> > >
> > > By the time the suspend finisher (ie this function) is run, the
> > > processor state has been saved and I think that's all you have to do,
> > > function can just return after calling swsusp_save(), unless I am missing
> > > something.
> > >
> > > I do not understand why a soft_restart is required here. On a side note,
> > > finisher is called with irqs disabled so, since you added a function for
> > > soft restart noirq, it should be used, if needed, but I have to understand
> > > why in the first place.
> >
> > It's required because you can't just return from the finisher. A normal
> > return from the finisher will always be interpreted as an abort rather
> > than success (because the state has to be unwound.)
> >
> > This is the only way to get a zero return from cpu_suspend().
>
> Yes, that's the only reason why this code is jumping to cpu_resume, since
> all it is needed is to snapshot the CPU context and by the time the
> finisher is called that's done. Wanted to say that soft reboot is not
> useful (cache flushing and resume with MMU off), but what you are saying
> is correct. We might be saving swsusp_save return value in a global
> variable and just return from the finisher, but that's horrible and
> given the amount of time it takes to snapshot the image to disk the
> cost of this soft reboot will be dwarfed by that.
>
> I wanted to ask and clarify why the code was written like this though, given
> its complexity.
We could also return a constant > 1. __cpu_suspend code will replace
a 0 return with 1 for paths exiting suspend, but will not change return
values != 0.
cpu_suspend_abort:
ldmia sp!, {r1 - r3} @ pop phys pgd, virt SP, phys
resume fn
teq r0, #0
moveq r0, #1 @ force non-zero value
mov sp, r2
ldmfd sp!, {r4 - r11, pc}
We could take advantage of that if we wanted, but Lorenzo pointed out
also that the relative benefit is very low since the cost of
resuming is >> soft_restart.
I'll go with leaving the soft_restart as is unless someone feels
strongly against.
Thanks!
Sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
Quoting Lorenzo Pieralisi (2014-02-22 04:09:10) > On Sat, Feb 22, 2014 at 10:38:40AM +, Russell King - ARM Linux wrote: > > On Wed, Feb 19, 2014 at 04:12:54PM +, Lorenzo Pieralisi wrote: > > > > + cpu_switch_mm(idmap_pgd, _mm); > > > > You need the idmap_pgd in place to call cpu_resume at it's physical > > address. Other page tables just won't do here. It's well established > > that this page table must be in place for the resume paths to work. > > Well, we do not need idmap page tables for copying the restore_pblist, > but we do need a set of tables that won't be corrupted by the copy and > idmap does the trick (I was confused because 1:1 mappings are not needed > for the copy itself). > > The switch to idmap is done for us in soft_reboot anyway before jumping to > cpu_resume and that's required, as you said. Ok, so I'll leave the cpu_switch_mm as is for the next patchset. Thanks Lorenzo, Russ and Russell! Sebastian -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
Quoting Lorenzo Pieralisi (2014-02-22 04:09:10) On Sat, Feb 22, 2014 at 10:38:40AM +, Russell King - ARM Linux wrote: On Wed, Feb 19, 2014 at 04:12:54PM +, Lorenzo Pieralisi wrote: + cpu_switch_mm(idmap_pgd, init_mm); You need the idmap_pgd in place to call cpu_resume at it's physical address. Other page tables just won't do here. It's well established that this page table must be in place for the resume paths to work. Well, we do not need idmap page tables for copying the restore_pblist, but we do need a set of tables that won't be corrupted by the copy and idmap does the trick (I was confused because 1:1 mappings are not needed for the copy itself). The switch to idmap is done for us in soft_reboot anyway before jumping to cpu_resume and that's required, as you said. Ok, so I'll leave the cpu_switch_mm as is for the next patchset. Thanks Lorenzo, Russ and Russell! Sebastian -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
Quoting Lorenzo Pieralisi (2014-02-22 04:09:10)
On Sat, Feb 22, 2014 at 10:38:40AM +, Russell King - ARM Linux wrote:
On Wed, Feb 19, 2014 at 04:12:54PM +, Lorenzo Pieralisi wrote:
On Wed, Feb 19, 2014 at 01:52:09AM +, Sebastian Capella wrote:
+/*
+ * Snapshot kernel memory and reset the system.
+ * After resume, the hibernation snapshot is written out.
+ */
+static int notrace __swsusp_arch_save_image(unsigned long unused)
+{
+ int ret;
+
+ ret = swsusp_save();
+ if (ret == 0)
+ soft_restart(virt_to_phys(cpu_resume));
By the time the suspend finisher (ie this function) is run, the
processor state has been saved and I think that's all you have to do,
function can just return after calling swsusp_save(), unless I am missing
something.
I do not understand why a soft_restart is required here. On a side note,
finisher is called with irqs disabled so, since you added a function for
soft restart noirq, it should be used, if needed, but I have to understand
why in the first place.
It's required because you can't just return from the finisher. A normal
return from the finisher will always be interpreted as an abort rather
than success (because the state has to be unwound.)
This is the only way to get a zero return from cpu_suspend().
Yes, that's the only reason why this code is jumping to cpu_resume, since
all it is needed is to snapshot the CPU context and by the time the
finisher is called that's done. Wanted to say that soft reboot is not
useful (cache flushing and resume with MMU off), but what you are saying
is correct. We might be saving swsusp_save return value in a global
variable and just return from the finisher, but that's horrible and
given the amount of time it takes to snapshot the image to disk the
cost of this soft reboot will be dwarfed by that.
I wanted to ask and clarify why the code was written like this though, given
its complexity.
We could also return a constant 1. __cpu_suspend code will replace
a 0 return with 1 for paths exiting suspend, but will not change return
values != 0.
cpu_suspend_abort:
ldmia sp!, {r1 - r3} @ pop phys pgd, virt SP, phys
resume fn
teq r0, #0
moveq r0, #1 @ force non-zero value
mov sp, r2
ldmfd sp!, {r4 - r11, pc}
We could take advantage of that if we wanted, but Lorenzo pointed out
also that the relative benefit is very low since the cost of
resuming is soft_restart.
I'll go with leaving the soft_restart as is unless someone feels
strongly against.
Thanks!
Sebastian
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On Sat 2014-02-22 10:16:55, Russell King - ARM Linux wrote: > On Thu, Feb 20, 2014 at 04:27:55PM +, Lorenzo Pieralisi wrote: > > I still do not understand why switching to idmap, which is a clone of > > init_mm + 1:1 kernel mappings is required here. Why idmap ? > > > > And while at it, can't the idmap be overwritten _while_ copying back the > > resume kernel ? Is it safe to use idmap page tables while copying ? > > > > I had a look at x86 and there idmap page tables used to resume are created > > on the fly using safe pages, on ARM idmap is created at boot. > > That's fine. > > Remember, you're required to boot exactly the same kernel image when > resuming as the kernel which created the suspend image. Unless you > have random allocations going on, you should get the same layout for > the idmap stuff at each boot. Actually, x86-64 is able to resume from different kernel these days, and some day you may want to do it on arm, too. But it is definitely not needed for inital merge. Thanks, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
Hi! > > return from the finisher will always be interpreted as an abort rather > > than success (because the state has to be unwound.) > > > > This is the only way to get a zero return from cpu_suspend(). > > Yes, that's the only reason why this code is jumping to cpu_resume, since > all it is needed is to snapshot the CPU context and by the time the > finisher is called that's done. Wanted to say that soft reboot is not > useful (cache flushing and resume with MMU off), but what you are saying > is correct. We might be saving swsusp_save return value in a global > variable and just return from the finisher, but that's horrible and > given the amount of time it takes to snapshot the image to disk the > cost of this soft reboot will be dwarfed by that. I feel bad for the "global variable" trick on x86, and if you can avoid it, please do! Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On Sat, Feb 22, 2014 at 10:16:55AM +, Russell King - ARM Linux wrote: > On Thu, Feb 20, 2014 at 04:27:55PM +, Lorenzo Pieralisi wrote: > > I still do not understand why switching to idmap, which is a clone of > > init_mm + 1:1 kernel mappings is required here. Why idmap ? > > > > And while at it, can't the idmap be overwritten _while_ copying back the > > resume kernel ? Is it safe to use idmap page tables while copying ? > > > > I had a look at x86 and there idmap page tables used to resume are created > > on the fly using safe pages, on ARM idmap is created at boot. > > That's fine. > > Remember, you're required to boot exactly the same kernel image when > resuming as the kernel which created the suspend image. Unless you > have random allocations going on, you should get the same layout for > the idmap stuff at each boot. Thanks Russell, now that's clear. We do need a copy of page tables that are not tampered with while copying, and idmap works well for that. Lorenzo -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On Sat, Feb 22, 2014 at 10:38:40AM +, Russell King - ARM Linux wrote:
> On Wed, Feb 19, 2014 at 04:12:54PM +, Lorenzo Pieralisi wrote:
> > On Wed, Feb 19, 2014 at 01:52:09AM +, Sebastian Capella wrote:
> > > +/*
> > > + * Snapshot kernel memory and reset the system.
> > > + * After resume, the hibernation snapshot is written out.
> > > + */
> > > +static int notrace __swsusp_arch_save_image(unsigned long unused)
> > > +{
> > > + int ret;
> > > +
> > > + ret = swsusp_save();
> > > + if (ret == 0)
> > > + soft_restart(virt_to_phys(cpu_resume));
> >
> > By the time the suspend finisher (ie this function) is run, the
> > processor state has been saved and I think that's all you have to do,
> > function can just return after calling swsusp_save(), unless I am missing
> > something.
> >
> > I do not understand why a soft_restart is required here. On a side note,
> > finisher is called with irqs disabled so, since you added a function for
> > soft restart noirq, it should be used, if needed, but I have to understand
> > why in the first place.
>
> It's required because you can't just return from the finisher. A normal
> return from the finisher will always be interpreted as an abort rather
> than success (because the state has to be unwound.)
>
> This is the only way to get a zero return from cpu_suspend().
Yes, that's the only reason why this code is jumping to cpu_resume, since
all it is needed is to snapshot the CPU context and by the time the
finisher is called that's done. Wanted to say that soft reboot is not
useful (cache flushing and resume with MMU off), but what you are saying
is correct. We might be saving swsusp_save return value in a global
variable and just return from the finisher, but that's horrible and
given the amount of time it takes to snapshot the image to disk the
cost of this soft reboot will be dwarfed by that.
I wanted to ask and clarify why the code was written like this though, given
its complexity.
> > > +/*
> > > + * The framework loads the hibernation image into a linked list anchored
> > > + * at restore_pblist, for swsusp_arch_resume() to copy back to the proper
> > > + * destinations.
> > > + *
> > > + * To make this work if resume is triggered from initramfs, the
> > > + * pagetables need to be switched to allow writes to kernel mem.
> >
> > Can you elaborate a bit more on this please ?
> >
> > > + */
> > > +static void notrace __swsusp_arch_restore_image(void *unused)
> > > +{
> > > + struct pbe *pbe;
> > > +
> > > + cpu_switch_mm(idmap_pgd, _mm);
> >
> > Same here, thanks.
> >
> > > + for (pbe = restore_pblist; pbe; pbe = pbe->next)
> > > + copy_page(pbe->orig_address, pbe->address);
> > > +
> > > + soft_restart_noirq(virt_to_phys(cpu_resume));
> >
> > This soft_restart is justified so that you resume from the context saved
> > when creating the image.
>
> You need the idmap_pgd in place to call cpu_resume at it's physical
> address. Other page tables just won't do here. It's well established
> that this page table must be in place for the resume paths to work.
Well, we do not need idmap page tables for copying the restore_pblist,
but we do need a set of tables that won't be corrupted by the copy and
idmap does the trick (I was confused because 1:1 mappings are not needed
for the copy itself).
The switch to idmap is done for us in soft_reboot anyway before jumping to
cpu_resume and that's required, as you said.
Lorenzo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On Wed, Feb 19, 2014 at 04:12:54PM +, Lorenzo Pieralisi wrote:
> On Wed, Feb 19, 2014 at 01:52:09AM +, Sebastian Capella wrote:
> > +/*
> > + * Snapshot kernel memory and reset the system.
> > + * After resume, the hibernation snapshot is written out.
> > + */
> > +static int notrace __swsusp_arch_save_image(unsigned long unused)
> > +{
> > + int ret;
> > +
> > + ret = swsusp_save();
> > + if (ret == 0)
> > + soft_restart(virt_to_phys(cpu_resume));
>
> By the time the suspend finisher (ie this function) is run, the
> processor state has been saved and I think that's all you have to do,
> function can just return after calling swsusp_save(), unless I am missing
> something.
>
> I do not understand why a soft_restart is required here. On a side note,
> finisher is called with irqs disabled so, since you added a function for
> soft restart noirq, it should be used, if needed, but I have to understand
> why in the first place.
It's required because you can't just return from the finisher. A normal
return from the finisher will always be interpreted as an abort rather
than success (because the state has to be unwound.)
This is the only way to get a zero return from cpu_suspend().
> > +/*
> > + * The framework loads the hibernation image into a linked list anchored
> > + * at restore_pblist, for swsusp_arch_resume() to copy back to the proper
> > + * destinations.
> > + *
> > + * To make this work if resume is triggered from initramfs, the
> > + * pagetables need to be switched to allow writes to kernel mem.
>
> Can you elaborate a bit more on this please ?
>
> > + */
> > +static void notrace __swsusp_arch_restore_image(void *unused)
> > +{
> > + struct pbe *pbe;
> > +
> > + cpu_switch_mm(idmap_pgd, _mm);
>
> Same here, thanks.
>
> > + for (pbe = restore_pblist; pbe; pbe = pbe->next)
> > + copy_page(pbe->orig_address, pbe->address);
> > +
> > + soft_restart_noirq(virt_to_phys(cpu_resume));
>
> This soft_restart is justified so that you resume from the context saved
> when creating the image.
You need the idmap_pgd in place to call cpu_resume at it's physical
address. Other page tables just won't do here. It's well established
that this page table must be in place for the resume paths to work.
So yes, the comments above the function are wrong. idmap_pgd must be
in place for cpu_resume() to work.
--
FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up. Estimation
in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad.
Estimate before purchase was "up to 13.2Mbit".
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On Fri, Feb 21, 2014 at 10:46:59PM -0800, Russ Dill wrote: > If there is worry about this, you could setup a page mapping in a > __nosave region, preventing it from being overwritten. Why would we need _another_ set of pages tables? Aren't two (swapper_pg_dir and the idmap one) enough? You do need to switch to the idmap one if you're going to call cpu_resume at its physical address, because that requires the identity mapping in order to work. -- FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up. Estimation in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad. Estimate before purchase was "up to 13.2Mbit". -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On Thu, Feb 20, 2014 at 04:27:55PM +, Lorenzo Pieralisi wrote: > I still do not understand why switching to idmap, which is a clone of > init_mm + 1:1 kernel mappings is required here. Why idmap ? > > And while at it, can't the idmap be overwritten _while_ copying back the > resume kernel ? Is it safe to use idmap page tables while copying ? > > I had a look at x86 and there idmap page tables used to resume are created > on the fly using safe pages, on ARM idmap is created at boot. That's fine. Remember, you're required to boot exactly the same kernel image when resuming as the kernel which created the suspend image. Unless you have random allocations going on, you should get the same layout for the idmap stuff at each boot. -- FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up. Estimation in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad. Estimate before purchase was "up to 13.2Mbit". -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On Thu, Feb 20, 2014 at 04:27:55PM +, Lorenzo Pieralisi wrote: I still do not understand why switching to idmap, which is a clone of init_mm + 1:1 kernel mappings is required here. Why idmap ? And while at it, can't the idmap be overwritten _while_ copying back the resume kernel ? Is it safe to use idmap page tables while copying ? I had a look at x86 and there idmap page tables used to resume are created on the fly using safe pages, on ARM idmap is created at boot. That's fine. Remember, you're required to boot exactly the same kernel image when resuming as the kernel which created the suspend image. Unless you have random allocations going on, you should get the same layout for the idmap stuff at each boot. -- FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up. Estimation in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad. Estimate before purchase was up to 13.2Mbit. -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On Fri, Feb 21, 2014 at 10:46:59PM -0800, Russ Dill wrote: If there is worry about this, you could setup a page mapping in a __nosave region, preventing it from being overwritten. Why would we need _another_ set of pages tables? Aren't two (swapper_pg_dir and the idmap one) enough? You do need to switch to the idmap one if you're going to call cpu_resume at its physical address, because that requires the identity mapping in order to work. -- FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up. Estimation in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad. Estimate before purchase was up to 13.2Mbit. -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On Wed, Feb 19, 2014 at 04:12:54PM +, Lorenzo Pieralisi wrote:
On Wed, Feb 19, 2014 at 01:52:09AM +, Sebastian Capella wrote:
+/*
+ * Snapshot kernel memory and reset the system.
+ * After resume, the hibernation snapshot is written out.
+ */
+static int notrace __swsusp_arch_save_image(unsigned long unused)
+{
+ int ret;
+
+ ret = swsusp_save();
+ if (ret == 0)
+ soft_restart(virt_to_phys(cpu_resume));
By the time the suspend finisher (ie this function) is run, the
processor state has been saved and I think that's all you have to do,
function can just return after calling swsusp_save(), unless I am missing
something.
I do not understand why a soft_restart is required here. On a side note,
finisher is called with irqs disabled so, since you added a function for
soft restart noirq, it should be used, if needed, but I have to understand
why in the first place.
It's required because you can't just return from the finisher. A normal
return from the finisher will always be interpreted as an abort rather
than success (because the state has to be unwound.)
This is the only way to get a zero return from cpu_suspend().
+/*
+ * The framework loads the hibernation image into a linked list anchored
+ * at restore_pblist, for swsusp_arch_resume() to copy back to the proper
+ * destinations.
+ *
+ * To make this work if resume is triggered from initramfs, the
+ * pagetables need to be switched to allow writes to kernel mem.
Can you elaborate a bit more on this please ?
+ */
+static void notrace __swsusp_arch_restore_image(void *unused)
+{
+ struct pbe *pbe;
+
+ cpu_switch_mm(idmap_pgd, init_mm);
Same here, thanks.
+ for (pbe = restore_pblist; pbe; pbe = pbe-next)
+ copy_page(pbe-orig_address, pbe-address);
+
+ soft_restart_noirq(virt_to_phys(cpu_resume));
This soft_restart is justified so that you resume from the context saved
when creating the image.
You need the idmap_pgd in place to call cpu_resume at it's physical
address. Other page tables just won't do here. It's well established
that this page table must be in place for the resume paths to work.
So yes, the comments above the function are wrong. idmap_pgd must be
in place for cpu_resume() to work.
--
FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up. Estimation
in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad.
Estimate before purchase was up to 13.2Mbit.
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On Sat, Feb 22, 2014 at 10:38:40AM +, Russell King - ARM Linux wrote:
On Wed, Feb 19, 2014 at 04:12:54PM +, Lorenzo Pieralisi wrote:
On Wed, Feb 19, 2014 at 01:52:09AM +, Sebastian Capella wrote:
+/*
+ * Snapshot kernel memory and reset the system.
+ * After resume, the hibernation snapshot is written out.
+ */
+static int notrace __swsusp_arch_save_image(unsigned long unused)
+{
+ int ret;
+
+ ret = swsusp_save();
+ if (ret == 0)
+ soft_restart(virt_to_phys(cpu_resume));
By the time the suspend finisher (ie this function) is run, the
processor state has been saved and I think that's all you have to do,
function can just return after calling swsusp_save(), unless I am missing
something.
I do not understand why a soft_restart is required here. On a side note,
finisher is called with irqs disabled so, since you added a function for
soft restart noirq, it should be used, if needed, but I have to understand
why in the first place.
It's required because you can't just return from the finisher. A normal
return from the finisher will always be interpreted as an abort rather
than success (because the state has to be unwound.)
This is the only way to get a zero return from cpu_suspend().
Yes, that's the only reason why this code is jumping to cpu_resume, since
all it is needed is to snapshot the CPU context and by the time the
finisher is called that's done. Wanted to say that soft reboot is not
useful (cache flushing and resume with MMU off), but what you are saying
is correct. We might be saving swsusp_save return value in a global
variable and just return from the finisher, but that's horrible and
given the amount of time it takes to snapshot the image to disk the
cost of this soft reboot will be dwarfed by that.
I wanted to ask and clarify why the code was written like this though, given
its complexity.
+/*
+ * The framework loads the hibernation image into a linked list anchored
+ * at restore_pblist, for swsusp_arch_resume() to copy back to the proper
+ * destinations.
+ *
+ * To make this work if resume is triggered from initramfs, the
+ * pagetables need to be switched to allow writes to kernel mem.
Can you elaborate a bit more on this please ?
+ */
+static void notrace __swsusp_arch_restore_image(void *unused)
+{
+ struct pbe *pbe;
+
+ cpu_switch_mm(idmap_pgd, init_mm);
Same here, thanks.
+ for (pbe = restore_pblist; pbe; pbe = pbe-next)
+ copy_page(pbe-orig_address, pbe-address);
+
+ soft_restart_noirq(virt_to_phys(cpu_resume));
This soft_restart is justified so that you resume from the context saved
when creating the image.
You need the idmap_pgd in place to call cpu_resume at it's physical
address. Other page tables just won't do here. It's well established
that this page table must be in place for the resume paths to work.
Well, we do not need idmap page tables for copying the restore_pblist,
but we do need a set of tables that won't be corrupted by the copy and
idmap does the trick (I was confused because 1:1 mappings are not needed
for the copy itself).
The switch to idmap is done for us in soft_reboot anyway before jumping to
cpu_resume and that's required, as you said.
Lorenzo
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On Sat, Feb 22, 2014 at 10:16:55AM +, Russell King - ARM Linux wrote: On Thu, Feb 20, 2014 at 04:27:55PM +, Lorenzo Pieralisi wrote: I still do not understand why switching to idmap, which is a clone of init_mm + 1:1 kernel mappings is required here. Why idmap ? And while at it, can't the idmap be overwritten _while_ copying back the resume kernel ? Is it safe to use idmap page tables while copying ? I had a look at x86 and there idmap page tables used to resume are created on the fly using safe pages, on ARM idmap is created at boot. That's fine. Remember, you're required to boot exactly the same kernel image when resuming as the kernel which created the suspend image. Unless you have random allocations going on, you should get the same layout for the idmap stuff at each boot. Thanks Russell, now that's clear. We do need a copy of page tables that are not tampered with while copying, and idmap works well for that. Lorenzo -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
Hi! return from the finisher will always be interpreted as an abort rather than success (because the state has to be unwound.) This is the only way to get a zero return from cpu_suspend(). Yes, that's the only reason why this code is jumping to cpu_resume, since all it is needed is to snapshot the CPU context and by the time the finisher is called that's done. Wanted to say that soft reboot is not useful (cache flushing and resume with MMU off), but what you are saying is correct. We might be saving swsusp_save return value in a global variable and just return from the finisher, but that's horrible and given the amount of time it takes to snapshot the image to disk the cost of this soft reboot will be dwarfed by that. I feel bad for the global variable trick on x86, and if you can avoid it, please do! Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On Sat 2014-02-22 10:16:55, Russell King - ARM Linux wrote: On Thu, Feb 20, 2014 at 04:27:55PM +, Lorenzo Pieralisi wrote: I still do not understand why switching to idmap, which is a clone of init_mm + 1:1 kernel mappings is required here. Why idmap ? And while at it, can't the idmap be overwritten _while_ copying back the resume kernel ? Is it safe to use idmap page tables while copying ? I had a look at x86 and there idmap page tables used to resume are created on the fly using safe pages, on ARM idmap is created at boot. That's fine. Remember, you're required to boot exactly the same kernel image when resuming as the kernel which created the suspend image. Unless you have random allocations going on, you should get the same layout for the idmap stuff at each boot. Actually, x86-64 is able to resume from different kernel these days, and some day you may want to do it on arm, too. But it is definitely not needed for inital merge. Thanks, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On 02/21/2014 08:37 PM, Sebastian Capella wrote: > Quoting Sebastian Capella (2014-02-21 15:59:11) >> - Cyril Chemparathy as his email is bouncing back to me. >> >> Quoting Sebastian Capella (2014-02-21 10:39:56) >>> Quoting Lorenzo Pieralisi (2014-02-20 08:27:55) >>> + cpu_switch_mm(idmap_pgd, _mm); >> [ ... ] >>> I can try removing it and seeing if there are side effects. >> >> FYI, It's definitely hanging with this removed, still looking. > > I see when we reach this call, the 1st level page table @ TTBR0 is located > at different memory locations each run (expected). If we omit the > cpu_switch_mm we're corrupting the page table causing the observed > intermittent failures. I believe these match the corruption you expected. > > The reason this doesn't happen when I leave the call is that idmap_pgd > is always at the same memory location. I expect this is because it's > allocated during init. I've seen the same address 50/50 times for > idmap_pgd. I don't think it is correct to rely on this behavior. > > Would it be appropriate to use the swapper_pg_dir directly in place > of idmap_pgd? > - I do not see any modification to the swapper_pg_dir contents in the > code that would change from init time. > - swapper_pg_dir is always at the same offset. > > Ideally we should have no issue with overwriting it with identical data. > > I've run a couple hundred test loops using swapper_pg_dir and so far > there are no failures. If there is worry about this, you could setup a page mapping in a __nosave region, preventing it from being overwritten. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On 02/21/2014 08:37 PM, Sebastian Capella wrote: Quoting Sebastian Capella (2014-02-21 15:59:11) - Cyril Chemparathy as his email is bouncing back to me. Quoting Sebastian Capella (2014-02-21 10:39:56) Quoting Lorenzo Pieralisi (2014-02-20 08:27:55) + cpu_switch_mm(idmap_pgd, init_mm); [ ... ] I can try removing it and seeing if there are side effects. FYI, It's definitely hanging with this removed, still looking. I see when we reach this call, the 1st level page table @ TTBR0 is located at different memory locations each run (expected). If we omit the cpu_switch_mm we're corrupting the page table causing the observed intermittent failures. I believe these match the corruption you expected. The reason this doesn't happen when I leave the call is that idmap_pgd is always at the same memory location. I expect this is because it's allocated during init. I've seen the same address 50/50 times for idmap_pgd. I don't think it is correct to rely on this behavior. Would it be appropriate to use the swapper_pg_dir directly in place of idmap_pgd? - I do not see any modification to the swapper_pg_dir contents in the code that would change from init time. - swapper_pg_dir is always at the same offset. Ideally we should have no issue with overwriting it with identical data. I've run a couple hundred test loops using swapper_pg_dir and so far there are no failures. If there is worry about this, you could setup a page mapping in a __nosave region, preventing it from being overwritten. -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
Hi Sebastian,
On Wed, Feb 19, 2014 at 07:33:15PM +, Sebastian Capella wrote:
> Quoting Lorenzo Pieralisi (2014-02-19 08:12:54)
> > On Wed, Feb 19, 2014 at 01:52:09AM +, Sebastian Capella wrote:
> > [...]
> > > diff --git a/arch/arm/kernel/hibernate.c b/arch/arm/kernel/hibernate.c
> > > new file mode 100644
> > > index 000..16f406f
> > > --- /dev/null
> > > +++ b/arch/arm/kernel/hibernate.c
> > > +void notrace save_processor_state(void)
> > > +{
> > > + WARN_ON(num_online_cpus() != 1);
> > > + flush_thread();
> >
> > Can you explain to me please why we need to call flush_thread() here ?
> > At this point in time syscore_suspend() was already called and CPU
> > peripheral state saved through CPU PM notifiers.
>
> Copying Russ' response here:
>
> "I think the idea here is to get the CPU into a state so that later
> when we resume from the resume kernel, the actual CPU state matches
> the state we have in kernel. The main thing flush_thread does is clear
> out any and all FP state." - Russ Dill
See my reply to Russ.
[...]
> > > +static void notrace __swsusp_arch_restore_image(void *unused)
> > > +{
> > > + struct pbe *pbe;
> > > +
> > > + cpu_switch_mm(idmap_pgd, _mm);
> >
> > Same here, thanks.
>
> At restore time, we take the save buffer data and restore it to the same
> physical locations used in the previous execution. This will require having
> write access to all of memory, which may not be generally granted by the
> current mm. So we switch to 1-1 init_mm to restore memory.
I still do not understand why switching to idmap, which is a clone of
init_mm + 1:1 kernel mappings is required here. Why idmap ?
And while at it, can't the idmap be overwritten _while_ copying back the
resume kernel ? Is it safe to use idmap page tables while copying ?
I had a look at x86 and there idmap page tables used to resume are created
on the fly using safe pages, on ARM idmap is created at boot.
I am grokking the code to understand what is really needed here, will get
back to you asap but I would like things to be clarified in the interim.
Thanks,
Lorenzo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On Wed, Feb 19, 2014 at 07:10:31PM +, Russ Dill wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > On 02/19/2014 08:12 AM, Lorenzo Pieralisi wrote: > > + * https://patchwork.kernel.org/patch/96442/ > I am guessing the snippets of code your comments refer to. > I think the idea here is to get the CPU into a state so that later > when we resume from the resume kernel, the actual CPU state matches > the state we have in kernel. The main thing flush_thread does is clear > out any and all FP state. Which has already been saved through syscore_suspend() > The may be part of the patchset that is OBE. It has to be updated then. > cpu_resume makes many assumptions about the state of the state of the > CPU, the primary being that the MMU is disabled, but also that all > caches and IRQs are disabled. soft_restart does all this for us. > > > > ah, you are saying just return from __swsusp_arch_save_image and allow > cpu_suspend_abort to be called, placing the result of swsusp_save > somewhere else. This may work and would reduce the complexity of the > code slightly. Yes. Basically you are doing a soft reboot just to return 0. > This is taken from the previous iteration of the patchset, I think the > comment is OBE. Updated it please then. > But this is still required to select the right mapping for our copying. /me confused. Please describe what switching to idmap is meant to achieve. In the patch above the copied swapper pgdir is not even used, I would like to understand why this is done. > I don't remember why I needed to prevent gcc from manipulating the > stack here. That's not a good reason to mark a function with attr __naked. If it is needed we leave it there, if it is not it has to go. > This is another holdover from previous patch versions that may be OBE. See above. Lorenzo -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On Wed, Feb 19, 2014 at 07:10:31PM +, Russ Dill wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 02/19/2014 08:12 AM, Lorenzo Pieralisi wrote: + * https://patchwork.kernel.org/patch/96442/ I am guessing the snippets of code your comments refer to. I think the idea here is to get the CPU into a state so that later when we resume from the resume kernel, the actual CPU state matches the state we have in kernel. The main thing flush_thread does is clear out any and all FP state. Which has already been saved through syscore_suspend() The may be part of the patchset that is OBE. It has to be updated then. cpu_resume makes many assumptions about the state of the state of the CPU, the primary being that the MMU is disabled, but also that all caches and IRQs are disabled. soft_restart does all this for us. ah, you are saying just return from __swsusp_arch_save_image and allow cpu_suspend_abort to be called, placing the result of swsusp_save somewhere else. This may work and would reduce the complexity of the code slightly. Yes. Basically you are doing a soft reboot just to return 0. This is taken from the previous iteration of the patchset, I think the comment is OBE. Updated it please then. But this is still required to select the right mapping for our copying. /me confused. Please describe what switching to idmap is meant to achieve. In the patch above the copied swapper pgdir is not even used, I would like to understand why this is done. I don't remember why I needed to prevent gcc from manipulating the stack here. That's not a good reason to mark a function with attr __naked. If it is needed we leave it there, if it is not it has to go. This is another holdover from previous patch versions that may be OBE. See above. Lorenzo -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
Hi Sebastian,
On Wed, Feb 19, 2014 at 07:33:15PM +, Sebastian Capella wrote:
Quoting Lorenzo Pieralisi (2014-02-19 08:12:54)
On Wed, Feb 19, 2014 at 01:52:09AM +, Sebastian Capella wrote:
[...]
diff --git a/arch/arm/kernel/hibernate.c b/arch/arm/kernel/hibernate.c
new file mode 100644
index 000..16f406f
--- /dev/null
+++ b/arch/arm/kernel/hibernate.c
+void notrace save_processor_state(void)
+{
+ WARN_ON(num_online_cpus() != 1);
+ flush_thread();
Can you explain to me please why we need to call flush_thread() here ?
At this point in time syscore_suspend() was already called and CPU
peripheral state saved through CPU PM notifiers.
Copying Russ' response here:
I think the idea here is to get the CPU into a state so that later
when we resume from the resume kernel, the actual CPU state matches
the state we have in kernel. The main thing flush_thread does is clear
out any and all FP state. - Russ Dill
See my reply to Russ.
[...]
+static void notrace __swsusp_arch_restore_image(void *unused)
+{
+ struct pbe *pbe;
+
+ cpu_switch_mm(idmap_pgd, init_mm);
Same here, thanks.
At restore time, we take the save buffer data and restore it to the same
physical locations used in the previous execution. This will require having
write access to all of memory, which may not be generally granted by the
current mm. So we switch to 1-1 init_mm to restore memory.
I still do not understand why switching to idmap, which is a clone of
init_mm + 1:1 kernel mappings is required here. Why idmap ?
And while at it, can't the idmap be overwritten _while_ copying back the
resume kernel ? Is it safe to use idmap page tables while copying ?
I had a look at x86 and there idmap page tables used to resume are created
on the fly using safe pages, on ARM idmap is created at boot.
I am grokking the code to understand what is really needed here, will get
back to you asap but I would like things to be clarified in the interim.
Thanks,
Lorenzo
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 02/19/2014 08:12 AM, Lorenzo Pieralisi wrote: + * https://patchwork.kernel.org/patch/96442/ I think the idea here is to get the CPU into a state so that later when we resume from the resume kernel, the actual CPU state matches the state we have in kernel. The main thing flush_thread does is clear out any and all FP state. The may be part of the patchset that is OBE. cpu_resume makes many assumptions about the state of the state of the CPU, the primary being that the MMU is disabled, but also that all caches and IRQs are disabled. soft_restart does all this for us. ah, you are saying just return from __swsusp_arch_save_image and allow cpu_suspend_abort to be called, placing the result of swsusp_save somewhere else. This may work and would reduce the complexity of the code slightly. This is taken from the previous iteration of the patchset, I think the comment is OBE. But this is still required to select the right mapping for our copying. I don't remember why I needed to prevent gcc from manipulating the stack here. This is another holdover from previous patch versions that may be OBE. -BEGIN PGP SIGNATURE- Version: GnuPG v1 Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlMFAaYACgkQfNRrxBinbdsWTwCgowSU7VPqGcM4ks39FtAihsBe vfYAn3gxZEu753xyESuye0y1z+wbWJRp =JZ1s -END PGP SIGNATURE- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On Wed, Feb 19, 2014 at 01:52:09AM +, Sebastian Capella wrote:
[...]
> diff --git a/arch/arm/kernel/hibernate.c b/arch/arm/kernel/hibernate.c
> new file mode 100644
> index 000..16f406f
> --- /dev/null
> +++ b/arch/arm/kernel/hibernate.c
> @@ -0,0 +1,106 @@
> +/*
> + * Hibernation support specific for ARM
> + *
> + * Derived from work on ARM hibernation support by:
> + *
> + * Ubuntu project, hibernation support for mach-dove
> + * Copyright (C) 2010 Nokia Corporation (Hiroshi Doyu)
> + * Copyright (C) 2010 Texas Instruments, Inc. (Teerth Reddy et al.)
> + * https://lkml.org/lkml/2010/6/18/4
> + *
> https://lists.linux-foundation.org/pipermail/linux-pm/2010-June/027422.html
> + * https://patchwork.kernel.org/patch/96442/
> + *
> + * Copyright (C) 2006 Rafael J. Wysocki
> + *
> + * License terms: GNU General Public License (GPL) version 2
> + */
> +
> +#include
> +#include
> +#include
> +#include
> +#include
> +#include
> +#include
> +
> +extern const void __nosave_begin, __nosave_end;
> +
> +int pfn_is_nosave(unsigned long pfn)
> +{
> + unsigned long nosave_begin_pfn =
> + __pa_symbol(&__nosave_begin) >> PAGE_SHIFT;
> + unsigned long nosave_end_pfn =
> + PAGE_ALIGN(__pa_symbol(&__nosave_end)) >> PAGE_SHIFT;
> +
> + return (pfn >= nosave_begin_pfn) && (pfn < nosave_end_pfn);
> +}
> +
> +void notrace save_processor_state(void)
> +{
> + WARN_ON(num_online_cpus() != 1);
> + flush_thread();
Can you explain to me please why we need to call flush_thread() here ?
At this point in time syscore_suspend() was already called and CPU
peripheral state saved through CPU PM notifiers.
> + local_fiq_disable();
To me it looks like we are using this hook to disable fiqs, since it is
not done in generic code.
> +}
> +
> +void notrace restore_processor_state(void)
> +{
> + local_fiq_enable();
> +}
> +
> +/*
> + * Snapshot kernel memory and reset the system.
> + * After resume, the hibernation snapshot is written out.
> + */
> +static int notrace __swsusp_arch_save_image(unsigned long unused)
> +{
> + int ret;
> +
> + ret = swsusp_save();
> + if (ret == 0)
> + soft_restart(virt_to_phys(cpu_resume));
By the time the suspend finisher (ie this function) is run, the
processor state has been saved and I think that's all you have to do,
function can just return after calling swsusp_save(), unless I am missing
something.
I do not understand why a soft_restart is required here. On a side note,
finisher is called with irqs disabled so, since you added a function for
soft restart noirq, it should be used, if needed, but I have to understand
why in the first place.
> + return ret;
> +}
> +
> +/*
> + * Save the current CPU state before suspend / poweroff.
> + */
> +int notrace swsusp_arch_suspend(void)
> +{
> + return cpu_suspend(0, __swsusp_arch_save_image);
If the goal of soft_restart is to return 0 on success from this call,
you can still do that without requiring a soft_restart in the first
place. IIUC all you want to achieve is to save processor context
registers so that when you resume from image you will actually return
from here.
> +}
> +
> +/*
> + * The framework loads the hibernation image into a linked list anchored
> + * at restore_pblist, for swsusp_arch_resume() to copy back to the proper
> + * destinations.
> + *
> + * To make this work if resume is triggered from initramfs, the
> + * pagetables need to be switched to allow writes to kernel mem.
Can you elaborate a bit more on this please ?
> + */
> +static void notrace __swsusp_arch_restore_image(void *unused)
> +{
> + struct pbe *pbe;
> +
> + cpu_switch_mm(idmap_pgd, _mm);
Same here, thanks.
> + for (pbe = restore_pblist; pbe; pbe = pbe->next)
> + copy_page(pbe->orig_address, pbe->address);
> +
> + soft_restart_noirq(virt_to_phys(cpu_resume));
This soft_restart is justified so that you resume from the context saved
when creating the image.
> +}
> +
> +static u8 __swsusp_resume_stk[PAGE_SIZE/2] __nosavedata;
> +
> +/*
> + * Resume from the hibernation image.
> + * Due to the kernel heap / data restore, stack contents change underneath
> + * and that would make function calls impossible; switch to a temporary
> + * stack within the nosave region to avoid that problem.
> + */
> +int __naked swsusp_arch_resume(void)
> +{
> + extern void call_with_stack(void (*fn)(void *), void *arg, void *sp);
Ok, a function with attribute __naked that still calls C functions, is
attr __naked really needed here ?
> + cpu_init(); /* get a clean PSR */
cpu_init is called in the cpu_resume path, why is this call needed here ?
Thanks,
Lorenzo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
On Wed, Feb 19, 2014 at 01:52:09AM +, Sebastian Capella wrote:
[...]
diff --git a/arch/arm/kernel/hibernate.c b/arch/arm/kernel/hibernate.c
new file mode 100644
index 000..16f406f
--- /dev/null
+++ b/arch/arm/kernel/hibernate.c
@@ -0,0 +1,106 @@
+/*
+ * Hibernation support specific for ARM
+ *
+ * Derived from work on ARM hibernation support by:
+ *
+ * Ubuntu project, hibernation support for mach-dove
+ * Copyright (C) 2010 Nokia Corporation (Hiroshi Doyu)
+ * Copyright (C) 2010 Texas Instruments, Inc. (Teerth Reddy et al.)
+ * https://lkml.org/lkml/2010/6/18/4
+ *
https://lists.linux-foundation.org/pipermail/linux-pm/2010-June/027422.html
+ * https://patchwork.kernel.org/patch/96442/
+ *
+ * Copyright (C) 2006 Rafael J. Wysocki r...@sisk.pl
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include linux/mm.h
+#include linux/suspend.h
+#include asm/tlbflush.h
+#include asm/cacheflush.h
+#include asm/system_misc.h
+#include asm/idmap.h
+#include asm/suspend.h
+
+extern const void __nosave_begin, __nosave_end;
+
+int pfn_is_nosave(unsigned long pfn)
+{
+ unsigned long nosave_begin_pfn =
+ __pa_symbol(__nosave_begin) PAGE_SHIFT;
+ unsigned long nosave_end_pfn =
+ PAGE_ALIGN(__pa_symbol(__nosave_end)) PAGE_SHIFT;
+
+ return (pfn = nosave_begin_pfn) (pfn nosave_end_pfn);
+}
+
+void notrace save_processor_state(void)
+{
+ WARN_ON(num_online_cpus() != 1);
+ flush_thread();
Can you explain to me please why we need to call flush_thread() here ?
At this point in time syscore_suspend() was already called and CPU
peripheral state saved through CPU PM notifiers.
+ local_fiq_disable();
To me it looks like we are using this hook to disable fiqs, since it is
not done in generic code.
+}
+
+void notrace restore_processor_state(void)
+{
+ local_fiq_enable();
+}
+
+/*
+ * Snapshot kernel memory and reset the system.
+ * After resume, the hibernation snapshot is written out.
+ */
+static int notrace __swsusp_arch_save_image(unsigned long unused)
+{
+ int ret;
+
+ ret = swsusp_save();
+ if (ret == 0)
+ soft_restart(virt_to_phys(cpu_resume));
By the time the suspend finisher (ie this function) is run, the
processor state has been saved and I think that's all you have to do,
function can just return after calling swsusp_save(), unless I am missing
something.
I do not understand why a soft_restart is required here. On a side note,
finisher is called with irqs disabled so, since you added a function for
soft restart noirq, it should be used, if needed, but I have to understand
why in the first place.
+ return ret;
+}
+
+/*
+ * Save the current CPU state before suspend / poweroff.
+ */
+int notrace swsusp_arch_suspend(void)
+{
+ return cpu_suspend(0, __swsusp_arch_save_image);
If the goal of soft_restart is to return 0 on success from this call,
you can still do that without requiring a soft_restart in the first
place. IIUC all you want to achieve is to save processor context
registers so that when you resume from image you will actually return
from here.
+}
+
+/*
+ * The framework loads the hibernation image into a linked list anchored
+ * at restore_pblist, for swsusp_arch_resume() to copy back to the proper
+ * destinations.
+ *
+ * To make this work if resume is triggered from initramfs, the
+ * pagetables need to be switched to allow writes to kernel mem.
Can you elaborate a bit more on this please ?
+ */
+static void notrace __swsusp_arch_restore_image(void *unused)
+{
+ struct pbe *pbe;
+
+ cpu_switch_mm(idmap_pgd, init_mm);
Same here, thanks.
+ for (pbe = restore_pblist; pbe; pbe = pbe-next)
+ copy_page(pbe-orig_address, pbe-address);
+
+ soft_restart_noirq(virt_to_phys(cpu_resume));
This soft_restart is justified so that you resume from the context saved
when creating the image.
+}
+
+static u8 __swsusp_resume_stk[PAGE_SIZE/2] __nosavedata;
+
+/*
+ * Resume from the hibernation image.
+ * Due to the kernel heap / data restore, stack contents change underneath
+ * and that would make function calls impossible; switch to a temporary
+ * stack within the nosave region to avoid that problem.
+ */
+int __naked swsusp_arch_resume(void)
+{
+ extern void call_with_stack(void (*fn)(void *), void *arg, void *sp);
Ok, a function with attribute __naked that still calls C functions, is
attr __naked really needed here ?
+ cpu_init(); /* get a clean PSR */
cpu_init is called in the cpu_resume path, why is this call needed here ?
Thanks,
Lorenzo
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 02/19/2014 08:12 AM, Lorenzo Pieralisi wrote: + * https://patchwork.kernel.org/patch/96442/ I think the idea here is to get the CPU into a state so that later when we resume from the resume kernel, the actual CPU state matches the state we have in kernel. The main thing flush_thread does is clear out any and all FP state. The may be part of the patchset that is OBE. cpu_resume makes many assumptions about the state of the state of the CPU, the primary being that the MMU is disabled, but also that all caches and IRQs are disabled. soft_restart does all this for us. ah, you are saying just return from __swsusp_arch_save_image and allow cpu_suspend_abort to be called, placing the result of swsusp_save somewhere else. This may work and would reduce the complexity of the code slightly. This is taken from the previous iteration of the patchset, I think the comment is OBE. But this is still required to select the right mapping for our copying. I don't remember why I needed to prevent gcc from manipulating the stack here. This is another holdover from previous patch versions that may be OBE. -BEGIN PGP SIGNATURE- Version: GnuPG v1 Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlMFAaYACgkQfNRrxBinbdsWTwCgowSU7VPqGcM4ks39FtAihsBe vfYAn3gxZEu753xyESuye0y1z+wbWJRp =JZ1s -END PGP SIGNATURE- -- To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
[PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
From: Russ Dill
Enable hibernation for ARM architectures and provide ARM
architecture specific calls used during hibernation.
The swsusp hibernation framework depends on the
platform first having functional suspend/resume.
Then, in order to enable hibernation on a given platform, a
platform_hibernation_ops structure may need to be registered with
the system in order to save/restore any SoC-specific / cpu specific
state needing (re)init over a suspend-to-disk/resume-from-disk cycle.
For example:
- "secure" SoCs that have different sets of control registers
and/or different CR reg access patterns.
- SoCs with L2 caches as the activation sequence there is
SoC-dependent; a full off-on cycle for L2 is not done
by the hibernation support code.
- SoCs requiring steps on wakeup _before_ the "generic" parts
done by cpu_suspend / cpu_resume can work correctly.
- SoCs having persistent state which is maintained during suspend
and resume, but will be lost during the power off cycle after
suspend-to-disk.
This is a rebase/rework of Frank Hofmann's v5 hibernation patchset.
Cc: Russ Dill
Cc: "Rafael J. Wysocki"
Signed-off-by: Sebastian Capella
Cc: Russell King
Cc: Len Brown
Cc: Pavel Machek
Cc: Nicolas Pitre
Cc: Santosh Shilimkar
Cc: Will Deacon
Cc: Cyril Chemparathy
Cc: Jonathan Austin
Cc: Catalin Marinas
Cc: "Uwe Kleine-König"
Cc: Stephen Boyd
---
arch/arm/include/asm/memory.h |1 +
arch/arm/kernel/Makefile |1 +
arch/arm/kernel/hibernate.c | 106 +
arch/arm/mm/Kconfig |5 ++
include/linux/suspend.h |2 +
5 files changed, 115 insertions(+)
create mode 100644 arch/arm/kernel/hibernate.c
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 8756e4b..1079ea8 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -291,6 +291,7 @@ static inline void *phys_to_virt(phys_addr_t x)
*/
#define __pa(x)__virt_to_phys((unsigned long)(x))
#define __va(x)((void
*)__phys_to_virt((phys_addr_t)(x)))
+#define __pa_symbol(x) __pa(RELOC_HIDE((unsigned long)(x), 0))
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
extern phys_addr_t (*arch_virt_to_idmap)(unsigned long x);
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index a30fc9b..8afa848 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_ARTHUR) += arthur.o
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
obj-$(CONFIG_ARM_CPU_SUSPEND) += sleep.o suspend.o
+obj-$(CONFIG_HIBERNATION) += hibernate.o
obj-$(CONFIG_SMP) += smp.o
ifdef CONFIG_MMU
obj-$(CONFIG_SMP) += smp_tlb.o
diff --git a/arch/arm/kernel/hibernate.c b/arch/arm/kernel/hibernate.c
new file mode 100644
index 000..16f406f
--- /dev/null
+++ b/arch/arm/kernel/hibernate.c
@@ -0,0 +1,106 @@
+/*
+ * Hibernation support specific for ARM
+ *
+ * Derived from work on ARM hibernation support by:
+ *
+ * Ubuntu project, hibernation support for mach-dove
+ * Copyright (C) 2010 Nokia Corporation (Hiroshi Doyu)
+ * Copyright (C) 2010 Texas Instruments, Inc. (Teerth Reddy et al.)
+ * https://lkml.org/lkml/2010/6/18/4
+ * https://lists.linux-foundation.org/pipermail/linux-pm/2010-June/027422.html
+ * https://patchwork.kernel.org/patch/96442/
+ *
+ * Copyright (C) 2006 Rafael J. Wysocki
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+extern const void __nosave_begin, __nosave_end;
+
+int pfn_is_nosave(unsigned long pfn)
+{
+ unsigned long nosave_begin_pfn =
+ __pa_symbol(&__nosave_begin) >> PAGE_SHIFT;
+ unsigned long nosave_end_pfn =
+ PAGE_ALIGN(__pa_symbol(&__nosave_end)) >> PAGE_SHIFT;
+
+ return (pfn >= nosave_begin_pfn) && (pfn < nosave_end_pfn);
+}
+
+void notrace save_processor_state(void)
+{
+ WARN_ON(num_online_cpus() != 1);
+ flush_thread();
+ local_fiq_disable();
+}
+
+void notrace restore_processor_state(void)
+{
+ local_fiq_enable();
+}
+
+/*
+ * Snapshot kernel memory and reset the system.
+ * After resume, the hibernation snapshot is written out.
+ */
+static int notrace __swsusp_arch_save_image(unsigned long unused)
+{
+ int ret;
+
+ ret = swsusp_save();
+ if (ret == 0)
+ soft_restart(virt_to_phys(cpu_resume));
+ return ret;
+}
+
+/*
+ * Save the current CPU state before suspend / poweroff.
+ */
+int notrace swsusp_arch_suspend(void)
+{
+ return cpu_suspend(0, __swsusp_arch_save_image);
+}
+
+/*
+ * The framework loads the hibernation image into a linked list anchored
+ * at restore_pblist, for swsusp_arch_resume() to copy back to the proper
+
[PATCH RFC v1 3/3] ARM hibernation / suspend-to-disk
From: Russ Dill russ.d...@ti.com
Enable hibernation for ARM architectures and provide ARM
architecture specific calls used during hibernation.
The swsusp hibernation framework depends on the
platform first having functional suspend/resume.
Then, in order to enable hibernation on a given platform, a
platform_hibernation_ops structure may need to be registered with
the system in order to save/restore any SoC-specific / cpu specific
state needing (re)init over a suspend-to-disk/resume-from-disk cycle.
For example:
- secure SoCs that have different sets of control registers
and/or different CR reg access patterns.
- SoCs with L2 caches as the activation sequence there is
SoC-dependent; a full off-on cycle for L2 is not done
by the hibernation support code.
- SoCs requiring steps on wakeup _before_ the generic parts
done by cpu_suspend / cpu_resume can work correctly.
- SoCs having persistent state which is maintained during suspend
and resume, but will be lost during the power off cycle after
suspend-to-disk.
This is a rebase/rework of Frank Hofmann's v5 hibernation patchset.
Cc: Russ Dill russ.d...@ti.com
Cc: Rafael J. Wysocki r...@rjwysocki.net
Signed-off-by: Sebastian Capella sebastian.cape...@linaro.org
Cc: Russell King li...@arm.linux.org.uk
Cc: Len Brown len.br...@intel.com
Cc: Pavel Machek pa...@ucw.cz
Cc: Nicolas Pitre n...@linaro.org
Cc: Santosh Shilimkar santosh.shilim...@ti.com
Cc: Will Deacon will.dea...@arm.com
Cc: Cyril Chemparathy cy...@ti.com
Cc: Jonathan Austin jonathan.aus...@arm.com
Cc: Catalin Marinas catalin.mari...@arm.com
Cc: Uwe Kleine-König u.kleine-koe...@pengutronix.de
Cc: Stephen Boyd sb...@codeaurora.org
---
arch/arm/include/asm/memory.h |1 +
arch/arm/kernel/Makefile |1 +
arch/arm/kernel/hibernate.c | 106 +
arch/arm/mm/Kconfig |5 ++
include/linux/suspend.h |2 +
5 files changed, 115 insertions(+)
create mode 100644 arch/arm/kernel/hibernate.c
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 8756e4b..1079ea8 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -291,6 +291,7 @@ static inline void *phys_to_virt(phys_addr_t x)
*/
#define __pa(x)__virt_to_phys((unsigned long)(x))
#define __va(x)((void
*)__phys_to_virt((phys_addr_t)(x)))
+#define __pa_symbol(x) __pa(RELOC_HIDE((unsigned long)(x), 0))
#define pfn_to_kaddr(pfn) __va((pfn) PAGE_SHIFT)
extern phys_addr_t (*arch_virt_to_idmap)(unsigned long x);
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index a30fc9b..8afa848 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_ARTHUR) += arthur.o
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
obj-$(CONFIG_ARM_CPU_SUSPEND) += sleep.o suspend.o
+obj-$(CONFIG_HIBERNATION) += hibernate.o
obj-$(CONFIG_SMP) += smp.o
ifdef CONFIG_MMU
obj-$(CONFIG_SMP) += smp_tlb.o
diff --git a/arch/arm/kernel/hibernate.c b/arch/arm/kernel/hibernate.c
new file mode 100644
index 000..16f406f
--- /dev/null
+++ b/arch/arm/kernel/hibernate.c
@@ -0,0 +1,106 @@
+/*
+ * Hibernation support specific for ARM
+ *
+ * Derived from work on ARM hibernation support by:
+ *
+ * Ubuntu project, hibernation support for mach-dove
+ * Copyright (C) 2010 Nokia Corporation (Hiroshi Doyu)
+ * Copyright (C) 2010 Texas Instruments, Inc. (Teerth Reddy et al.)
+ * https://lkml.org/lkml/2010/6/18/4
+ * https://lists.linux-foundation.org/pipermail/linux-pm/2010-June/027422.html
+ * https://patchwork.kernel.org/patch/96442/
+ *
+ * Copyright (C) 2006 Rafael J. Wysocki r...@sisk.pl
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include linux/mm.h
+#include linux/suspend.h
+#include asm/tlbflush.h
+#include asm/cacheflush.h
+#include asm/system_misc.h
+#include asm/idmap.h
+#include asm/suspend.h
+
+extern const void __nosave_begin, __nosave_end;
+
+int pfn_is_nosave(unsigned long pfn)
+{
+ unsigned long nosave_begin_pfn =
+ __pa_symbol(__nosave_begin) PAGE_SHIFT;
+ unsigned long nosave_end_pfn =
+ PAGE_ALIGN(__pa_symbol(__nosave_end)) PAGE_SHIFT;
+
+ return (pfn = nosave_begin_pfn) (pfn nosave_end_pfn);
+}
+
+void notrace save_processor_state(void)
+{
+ WARN_ON(num_online_cpus() != 1);
+ flush_thread();
+ local_fiq_disable();
+}
+
+void notrace restore_processor_state(void)
+{
+ local_fiq_enable();
+}
+
+/*
+ * Snapshot kernel memory and reset the system.
+ * After resume, the hibernation snapshot is written out.
+ */
+static int notrace __swsusp_arch_save_image(unsigned long unused)
+{
+ int ret;
+
+ ret = swsusp_save();
+ if (ret == 0)
+
