Re: [PATCH V2 6/8] dt-bindings: net: stmmac: add syscfg clock property

2019-02-22 Thread Rob Herring 
On Fri, 22 Feb 2019 09:28:07 +0100, Christophe Roullier wrote:
> Need syscfg clock for MCU family in case bootloader does not
> activate it.
> 
> Signed-off-by: Christophe Roullier 
> ---
>  Documentation/devicetree/bindings/net/stm32-dwmac.txt | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 

Reviewed-by: Rob Herring

[PATCH V2 6/8] dt-bindings: net: stmmac: add syscfg clock property

2019-02-22 Thread Christophe Roullier 
Need syscfg clock for MCU family in case bootloader does not
activate it.

Signed-off-by: Christophe Roullier 
---
 Documentation/devicetree/bindings/net/stm32-dwmac.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt 
b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
index f42dc68..524f8a0 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
@@ -14,8 +14,8 @@ Required properties:
 - clock-names: Should be "stmmaceth" for the host clock.
   Should be "mac-clk-tx" for the MAC TX clock.
   Should be "mac-clk-rx" for the MAC RX clock.
-  For MPU family need to add also "ethstp" for power mode clock 
and,
-  "syscfg-clk" for SYSCFG clock.
+  Should be "syscfg-clk" for the SYSCFG clock.
+  For MPU family need to add also "ethstp" for power mode clock
 - interrupt-names: Should contain a list of interrupt names corresponding to
the interrupts in the interrupts property, if available.
   Should be "macirq" for the main MAC IRQ
-- 
2.7.4