On Fri 01 Dec 09:02 PST 2017, Georgi Djakov wrote:
> The CPUs on Qualcomm MSM8916-based platforms are clocked by two PLLs,
> a primary (A53) CPU PLL and a secondary fixed-rate GPLL0. These sources
> are connected to a mux and half-integer divider, which is feeding the
> CPU cores.
>
> This patch adds support for the primary CPU PLL which generates the
> higher range of frequencies above 1GHz.
>
> Signed-off-by: Georgi Djakov
> Acked-by: Rob Herring
Acked-by: Bjorn Andersson
Regards,
Bjorn
> ---
> .../devicetree/bindings/clock/qcom,a53pll.txt | 22 +
> drivers/clk/qcom/Kconfig | 10 ++
> drivers/clk/qcom/Makefile | 1 +
> drivers/clk/qcom/a53-pll.c | 109
> +
> 4 files changed, 142 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/qcom,a53pll.txt
> create mode 100644 drivers/clk/qcom/a53-pll.c
>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.txt
> b/Documentation/devicetree/bindings/clock/qcom,a53pll.txt
> new file mode 100644
> index ..e3fa8118eaee
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.txt
> @@ -0,0 +1,22 @@
> +Qualcomm MSM8916 A53 PLL Binding
> +
> +The A53 PLL on MSM8916 platforms is the main CPU PLL used used for
> frequencies
> +above 1GHz.
> +
> +Required properties :
> +- compatible : Shall contain only one of the following:
> +
> + "qcom,msm8916-a53pll"
> +
> +- reg : shall contain base register location and length
> +
> +- #clock-cells : must be set to <0>
> +
> +Example:
> +
> + a53pll: clock@b016000 {
> + compatible = "qcom,msm8916-a53pll";
> + reg = <0xb016000 0x40>;
> + #clock-cells = <0>;
> + };
> +
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index 9f6c278deead..81ac7b9378fe 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -12,6 +12,16 @@ config COMMON_CLK_QCOM
> select REGMAP_MMIO
> select RESET_CONTROLLER
>
> +config QCOM_A53PLL
> + bool "MSM8916 A53 PLL"
> + depends on COMMON_CLK_QCOM
> + default ARCH_QCOM
> + help
> + Support for the A53 PLL on MSM8916 devices. It provides
> + the CPU with frequencies above 1GHz.
> + Say Y if you want to support higher CPU frequencies on MSM8916
> + devices.
> +
> config QCOM_CLK_RPM
> tristate "RPM based Clock Controller"
> depends on COMMON_CLK_QCOM && MFD_QCOM_RPM
> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> index 26410d31446b..e767c60c24ec 100644
> --- a/drivers/clk/qcom/Makefile
> +++ b/drivers/clk/qcom/Makefile
> @@ -32,5 +32,6 @@ obj-$(CONFIG_MSM_LCC_8960) += lcc-msm8960.o
> obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
> obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
> obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
> +obj-$(CONFIG_QCOM_A53PLL) += a53-pll.o
> obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
> obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
> diff --git a/drivers/clk/qcom/a53-pll.c b/drivers/clk/qcom/a53-pll.c
> new file mode 100644
> index ..b2bb8e9437f1
> --- /dev/null
> +++ b/drivers/clk/qcom/a53-pll.c
> @@ -0,0 +1,109 @@
> +/*
> + * Copyright (c) 2017, Linaro Limited
> + * Copyright (c) 2014, The Linux Foundation. All rights reserved.
> + *
> + * SPDX-License-Identifier: GPL-2.0
> + */
> +
> +#include
> +#include
> +#include
> +#include
> +
> +#include "clk-pll.h"
> +#include "clk-regmap.h"
> +
> +static const struct pll_freq_tbl a53pll_freq[] = {
> + { 99840, 52, 0x0, 0x1, 0 },
> + { 109440, 57, 0x0, 0x1, 0 },
> + { 115200, 62, 0x0, 0x1, 0 },
> + { 120960, 63, 0x0, 0x1, 0 },
> + { 124800, 65, 0x0, 0x1, 0 },
> + { 136320, 71, 0x0, 0x1, 0 },
> + { 140160, 73, 0x0, 0x1, 0 },
> +};
> +
> +static const struct regmap_config a53pll_regmap_config = {
> + .reg_bits = 32,
> + .reg_stride = 4,
> + .val_bits = 32,
> + .max_register = 0x40,
> + .fast_io= true,
> +};
> +
> +static int qcom_a53pll_remove(struct platform_device *pdev)
> +{
> + of_clk_del_provider(pdev->dev.of_node);
> + return 0;
> +}
> +
> +static int qcom_a53pll_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct regmap *regmap;
> + struct resource *res;
> + struct clk_pll *pll;
> + void __iomem *base;
> + struct clk_init_data init = { };
> + int ret;
> +
> + pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL);
> + if (!pll)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + regmap = devm_regmap_init_mmio(dev, base, &a53pll_regmap_conf