Use the preferred block comment style for the copyright and driver
description header comments.
Signed-off-by: Arno Tiemersma
---
drivers/staging/comedi/drivers/daqboard2000.c | 196 +-
1 file changed, 98 insertions(+), 98 deletions(-)
diff --git a/drivers/staging/comedi/drivers/daqboard2000.c
b/drivers/staging/comedi/drivers/daqboard2000.c
index 2ca8d3e..611b0a3 100644
--- a/drivers/staging/comedi/drivers/daqboard2000.c
+++ b/drivers/staging/comedi/drivers/daqboard2000.c
@@ -1,105 +1,105 @@
/*
- comedi/drivers/daqboard2000.c
- hardware driver for IOtech DAQboard/2000
-
- COMEDI - Linux Control and Measurement Device Interface
- Copyright (C) 1999 Anders Blomdell
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
+ * comedi/drivers/daqboard2000.c
+ * hardware driver for IOtech DAQboard/2000
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 1999 Anders Blomdell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
*/
/*
-Driver: daqboard2000
-Description: IOTech DAQBoard/2000
-Author: Anders Blomdell
-Status: works
-Updated: Mon, 14 Apr 2008 15:28:52 +0100
-Devices: [IOTech] DAQBoard/2000 (daqboard2000)
-
-Much of the functionality of this driver was determined from reading
-the source code for the Windows driver.
-
-The FPGA on the board requires fimware, which is available from
-http://www.comedi.org in the comedi_nonfree_firmware tarball.
-
-Configuration options: not applicable, uses PCI auto config
-*/
+ * Driver: daqboard2000
+ * Description: IOTech DAQBoard/2000
+ * Author: Anders Blomdell
+ * Status: works
+ * Updated: Mon, 14 Apr 2008 15:28:52 +0100
+ * Devices: [IOTech] DAQBoard/2000 (daqboard2000)
+ *
+ * Much of the functionality of this driver was determined from reading
+ * the source code for the Windows driver.
+ *
+ * The FPGA on the board requires fimware, which is available from
+ * http://www.comedi.org in the comedi_nonfree_firmware tarball.
+ *
+ * Configuration options: not applicable, uses PCI auto config
+ */
/*
- This card was obviously never intended to leave the Windows world,
- since it lacked all kind of hardware documentation (except for cable
- pinouts, plug and pray has something to catch up with yet).
-
- With some help from our swedish distributor, we got the Windows sourcecode
- for the card, and here are the findings so far.
-
- 1. A good document that describes the PCI interface chip is 9080db-106.pdf
- available from http://www.plxtech.com/products/io/pci9080
-
- 2. The initialization done so far is:
- a. program the FPGA (windows code sans a lot of error messages)
- b.
-
- 3. Analog out seems to work OK with DAC's disabled, if DAC's are enabled,
- you have to output values to all enabled DAC's until result appears, I
- guess that it has something to do with pacer clocks, but the source
- gives me no clues. I'll keep it simple so far.
-
- 4. Analog in.
- Each channel in the scanlist seems to be controlled by four
- control words:
-
- Word0:
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- ! | | | ! | | | ! | | | ! | | | !
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
- Word1:
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- ! | | | ! | | | ! | | | ! | | | !
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | | | | | | |
- +--+--+ | | | | +-- Digital input (??)
- | | | | + 10 us settling time
- | | | +-- Suspend acquisition (last to scan)
- | | + Simultaneous sample and hold
- | +-- Signed data format
- +- Correction offset low
-
- Word2:
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- ! | | | ! | | | ! | | | ! | | | !
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | | | | | | | | | |
- +-+ +--+--+ +++ +++ +--+--+
- | | |