Handle single or multi byte master read request with or without repeated start.
Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave
mode")
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokata...@broadcom.com>
---
drivers/i2c/busses/i2c-bcm-iproc.c | 215 +++++++++++++++++++++++------
1 file changed, 170 insertions(+), 45 deletions(-)
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c
b/drivers/i2c/busses/i2c-bcm-iproc.c
index 7a235f9f5884..22e04055b447 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -160,6 +160,11 @@
#define IE_S_ALL_INTERRUPT_SHIFT 21
#define IE_S_ALL_INTERRUPT_MASK 0x3f
+/*
+ * It takes ~18us to reading 10bytes of data, hence to keep tasklet
+ * running for less time, max slave read per tasklet is set to 10 bytes.
+ */
+#define MAX_SLAVE_RX_PER_INT 10
enum i2c_slave_read_status {
I2C_SLAVE_RX_FIFO_EMPTY = 0,
@@ -206,8 +211,18 @@ struct bcm_iproc_i2c_dev {
/* bytes that have been read */
unsigned int rx_bytes;
unsigned int thld_bytes;
+
+ bool slave_rx_only;
+ bool rx_start_rcvd;
+ bool slave_read_complete;
+ u32 tx_underrun;
+ u32 slave_int_mask;
+ struct tasklet_struct slave_rx_tasklet;
};
+/* tasklet to process slave rx data */
+static void slave_rx_tasklet_fn(unsigned long);
+
/*
* Can be expanded in the future if more interrupt status bits are utilized
*/
@@ -261,6 +276,7 @@ static void bcm_iproc_i2c_slave_init(
{
u32 val;
+ iproc_i2c->tx_underrun = 0;
if (need_reset) {
/* put controller in reset */
val = iproc_i2c_rd_reg(iproc_i2c, CFG_OFFSET);
@@ -297,8 +313,11 @@ static void bcm_iproc_i2c_slave_init(
/* Enable interrupt register to indicate a valid byte in receive fifo */
val = BIT(IE_S_RX_EVENT_SHIFT);
+ /* Enable interrupt register to indicate a Master read transaction */
+ val |= BIT(IE_S_RD_EVENT_SHIFT);
/* Enable interrupt register for the Slave BUSY command */
val |= BIT(IE_S_START_BUSY_SHIFT);
+ iproc_i2c->slave_int_mask = val;
iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val);
}
@@ -324,76 +343,176 @@ static void bcm_iproc_i2c_check_slave_status(
}
}
-static bool bcm_iproc_i2c_slave_isr(struct bcm_iproc_i2c_dev *iproc_i2c,
- u32 status)
+static void bcm_iproc_i2c_slave_read(struct bcm_iproc_i2c_dev *iproc_i2c)
{
+ u8 rx_data, rx_status;
+ u32 rx_bytes = 0;
u32 val;
- u8 value, rx_status;
- /* Slave RX byte receive */
- if (status & BIT(IS_S_RX_EVENT_SHIFT)) {
+ while (rx_bytes < MAX_SLAVE_RX_PER_INT) {
val = iproc_i2c_rd_reg(iproc_i2c, S_RX_OFFSET);
rx_status = (val >> S_RX_STATUS_SHIFT) & S_RX_STATUS_MASK;
- if (rx_status == I2C_SLAVE_RX_START) {
- /* Start of SMBUS for Master write */
- i2c_slave_event(iproc_i2c->slave,
- I2C_SLAVE_WRITE_REQUESTED, &value);
+ rx_data = ((val >> S_RX_DATA_SHIFT) & S_RX_DATA_MASK);
- val = iproc_i2c_rd_reg(iproc_i2c, S_RX_OFFSET);
- value = (u8)((val >> S_RX_DATA_SHIFT) & S_RX_DATA_MASK);
+ if (rx_status == I2C_SLAVE_RX_START) {
+ /* Start of SMBUS Master write */
i2c_slave_event(iproc_i2c->slave,
- I2C_SLAVE_WRITE_RECEIVED, &value);
- } else if (status & BIT(IS_S_RD_EVENT_SHIFT)) {
- /* Start of SMBUS for Master Read */
+ I2C_SLAVE_WRITE_REQUESTED, &rx_data);
+ iproc_i2c->rx_start_rcvd = true;
+ iproc_i2c->slave_read_complete = false;
+ } else if (rx_status == I2C_SLAVE_RX_DATA &&
+ iproc_i2c->rx_start_rcvd) {
+ /* Middle of SMBUS Master write */
i2c_slave_event(iproc_i2c->slave,
- I2C_SLAVE_READ_REQUESTED, &value);
- iproc_i2c_wr_reg(iproc_i2c, S_TX_OFFSET, value);
+ I2C_SLAVE_WRITE_RECEIVED, &rx_data);
+ } else if (rx_status == I2C_SLAVE_RX_END &&
+ iproc_i2c->rx_start_rcvd) {
+ /* End of SMBUS Master write */
+ if (iproc_i2c->slave_rx_only)
+ i2c_slave_event(iproc_i2c->slave,
+ I2C_SLAVE_WRITE_RECEIVED,
+ &rx_data);
+
+ i2c_slave_event(iproc_i2c->slave, I2C_SLAVE_STOP,
+ &rx_data);
+ } else if (rx_status == I2C_SLAVE_RX_FIFO_EMPTY) {
+ iproc_i2c->rx_start_rcvd = false;
+ iproc_i2c->slave_read_complete = true;
+ break;
+ }
- val = BIT(S_CMD_START_BUSY_SHIFT);
- iproc_i2c_wr_reg(iproc_i2c, S_CMD_OFFSET, val);
+ rx_bytes++;
+ }
+}
- /*
- * Enable interrupt for TX FIFO becomes empty and
- * less than PKT_LENGTH bytes were output on the SMBUS
- */
- val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
- val |= BIT(IE_S_TX_UNDERRUN_SHIFT);
- iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val);
- } else {
- /* Master write other than start */
- value = (u8)((val >> S_RX_DATA_SHIFT) & S_RX_DATA_MASK);
+static void slave_rx_tasklet_fn(unsigned long data)
+{
+ struct bcm_iproc_i2c_dev *iproc_i2c = (struct bcm_iproc_i2c_dev *)data;
+ u32 int_clr;
+
+ bcm_iproc_i2c_slave_read(iproc_i2c);
+
+ /* clear pending IS_S_RX_EVENT_SHIFT interrupt */
+ int_clr = BIT(IS_S_RX_EVENT_SHIFT);
+
+ if (!iproc_i2c->slave_rx_only && iproc_i2c->slave_read_complete) {
+ /*
+ * In case of single byte master-read request,
+ * IS_S_TX_UNDERRUN_SHIFT event is generated before
+ * IS_S_START_BUSY_SHIFT event. Hence start slave data send
+ * from first IS_S_TX_UNDERRUN_SHIFT event.
+ *
+ * This means don't send any data from slave when
+ * IS_S_RD_EVENT_SHIFT event is generated else it will increment
+ * eeprom or other backend slave driver read pointer twice.
+ */
+ iproc_i2c->tx_underrun = 0;
+ iproc_i2c->slave_int_mask |= BIT(IE_S_TX_UNDERRUN_SHIFT);
+
+ /* clear IS_S_RD_EVENT_SHIFT interrupt */
+ int_clr |= BIT(IS_S_RD_EVENT_SHIFT);
+ }
+
+ /* clear slave interrupt */
+ iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, int_clr);
+ /* enable slave interrupts */
+ iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, iproc_i2c->slave_int_mask);
+}
+
+static bool bcm_iproc_i2c_slave_isr(struct bcm_iproc_i2c_dev *iproc_i2c,
+ u32 status)
+{
+ u32 val;
+ u8 value;
+
+ /*
+ * Slave events in case of master-write, master-write-read and,
+ * master-read
+ *
+ * Master-write : only IS_S_RX_EVENT_SHIFT event
+ * Master-write-read: both IS_S_RX_EVENT_SHIFT and IS_S_RD_EVENT_SHIFT
+ * events
+ * Master-read : both IS_S_RX_EVENT_SHIFT and IS_S_RD_EVENT_SHIFT
+ * events or only IS_S_RD_EVENT_SHIFT
+ */
+ if (status & BIT(IS_S_RX_EVENT_SHIFT) ||
+ status & BIT(IS_S_RD_EVENT_SHIFT)) {
+ /* disable slave interrupts */
+ val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
+ val &= ~iproc_i2c->slave_int_mask;
+ iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val);
+
+ if (status & BIT(IS_S_RD_EVENT_SHIFT))
+ /* Master-write-read request */
+ iproc_i2c->slave_rx_only = false;
+ else
+ /* Master-write request only */
+ iproc_i2c->slave_rx_only = true;
+
+ /* schedule tasklet to read data later */
+ tasklet_schedule(&iproc_i2c->slave_rx_tasklet);
+
+ /* clear only IS_S_RX_EVENT_SHIFT interrupt */
+ iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET,
+ BIT(IS_S_RX_EVENT_SHIFT));
+ }
+
+ if (status & BIT(IS_S_TX_UNDERRUN_SHIFT)) {
+ iproc_i2c->tx_underrun++;
+ if (iproc_i2c->tx_underrun == 1)
+ /* Start of SMBUS for Master Read */
i2c_slave_event(iproc_i2c->slave,
- I2C_SLAVE_WRITE_RECEIVED, &value);
- if (rx_status == I2C_SLAVE_RX_END)
- i2c_slave_event(iproc_i2c->slave,
- I2C_SLAVE_STOP, &value);
- }
- } else if (status & BIT(IS_S_TX_UNDERRUN_SHIFT)) {
- /* Master read other than start */
- i2c_slave_event(iproc_i2c->slave,
- I2C_SLAVE_READ_PROCESSED, &value);
+ I2C_SLAVE_READ_REQUESTED,
+ &value);
+ else
+ /* Master read other than start */
+ i2c_slave_event(iproc_i2c->slave,
+ I2C_SLAVE_READ_PROCESSED,
+ &value);
iproc_i2c_wr_reg(iproc_i2c, S_TX_OFFSET, value);
+ /* start transfer */
val = BIT(S_CMD_START_BUSY_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, S_CMD_OFFSET, val);
+
+ /* clear interrupt */
+ iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET,
+ BIT(IS_S_TX_UNDERRUN_SHIFT));
}
- /* Stop */
+ /* Stop received from master in case of master read transaction */
if (status & BIT(IS_S_START_BUSY_SHIFT)) {
- i2c_slave_event(iproc_i2c->slave, I2C_SLAVE_STOP, &value);
/*
* Disable interrupt for TX FIFO becomes empty and
* less than PKT_LENGTH bytes were output on the SMBUS
*/
- val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
- val &= ~BIT(IE_S_TX_UNDERRUN_SHIFT);
- iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val);
+ iproc_i2c->slave_int_mask &= ~BIT(IE_S_TX_UNDERRUN_SHIFT);
+ iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET,
+ iproc_i2c->slave_int_mask);
+
+ /* End of SMBUS for Master Read */
+ val = BIT(S_TX_WR_STATUS_SHIFT);
+ iproc_i2c_wr_reg(iproc_i2c, S_TX_OFFSET, val);
+
+ val = BIT(S_CMD_START_BUSY_SHIFT);
+ iproc_i2c_wr_reg(iproc_i2c, S_CMD_OFFSET, val);
+
+ /* flush TX FIFOs */
+ val = iproc_i2c_rd_reg(iproc_i2c, S_FIFO_CTRL_OFFSET);
+ val |= (BIT(S_FIFO_TX_FLUSH_SHIFT));
+ iproc_i2c_wr_reg(iproc_i2c, S_FIFO_CTRL_OFFSET, val);
+
+ i2c_slave_event(iproc_i2c->slave, I2C_SLAVE_STOP, &value);
+
+ /* clear interrupt */
+ iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET,
+ BIT(IS_S_START_BUSY_SHIFT));
}
- /* clear interrupt status */
- iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, status);
+ /* check slave transmit status only if slave is transmitting */
+ if (!iproc_i2c->slave_rx_only)
+ bcm_iproc_i2c_check_slave_status(iproc_i2c);
- bcm_iproc_i2c_check_slave_status(iproc_i2c);
return true;
}
@@ -1074,6 +1193,10 @@ static int bcm_iproc_i2c_reg_slave(struct i2c_client
*slave)
return -EAFNOSUPPORT;
iproc_i2c->slave = slave;
+
+ tasklet_init(&iproc_i2c->slave_rx_tasklet, slave_rx_tasklet_fn,
+ (unsigned long)iproc_i2c);
+
bcm_iproc_i2c_slave_init(iproc_i2c, false);
return 0;
}
@@ -1094,6 +1217,8 @@ static int bcm_iproc_i2c_unreg_slave(struct i2c_client
*slave)
IE_S_ALL_INTERRUPT_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, tmp);
+ tasklet_kill(&iproc_i2c->slave_rx_tasklet);
+
/* Erase the slave address programmed */
tmp = iproc_i2c_rd_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET);
tmp &= ~BIT(S_CFG_EN_NIC_SMB_ADDR3_SHIFT);
--
2.17.1
smime.p7s
Description: S/MIME Cryptographic Signature
