On Thu, Jun 06, 2013 at 10:03:00AM +0200, Steffen Trumtrar wrote:
> On Thu, May 30, 2013 at 09:50:12AM +0200, Steffen Trumtrar wrote:
> > Add pwm driver for the NXP pca9685 16 channel pwm-led controller.
> >
> > The driver is really barebones at this stage. E.g. the OE' pin and
> > therefore the
On Thu, Jun 06, 2013 at 10:03:00AM +0200, Steffen Trumtrar wrote:
On Thu, May 30, 2013 at 09:50:12AM +0200, Steffen Trumtrar wrote:
Add pwm driver for the NXP pca9685 16 channel pwm-led controller.
The driver is really barebones at this stage. E.g. the OE' pin and
therefore the
On Thu, May 30, 2013 at 09:50:12AM +0200, Steffen Trumtrar wrote:
> Add pwm driver for the NXP pca9685 16 channel pwm-led controller.
>
> The driver is really barebones at this stage. E.g. the OE' pin and
> therefore the corresponding registers are not supported.
> The driver was tested on a HW
On Thu, May 30, 2013 at 09:50:12AM +0200, Steffen Trumtrar wrote:
Add pwm driver for the NXP pca9685 16 channel pwm-led controller.
The driver is really barebones at this stage. E.g. the OE' pin and
therefore the corresponding registers are not supported.
The driver was tested on a HW where
Add pwm driver for the NXP pca9685 16 channel pwm-led controller.
The driver is really barebones at this stage. E.g. the OE' pin and
therefore the corresponding registers are not supported.
The driver was tested on a HW where this pin is tied to GND.
Signed-off-by: Steffen Trumtrar
---
Changes
Add pwm driver for the NXP pca9685 16 channel pwm-led controller.
The driver is really barebones at this stage. E.g. the OE' pin and
therefore the corresponding registers are not supported.
The driver was tested on a HW where this pin is tied to GND.
Signed-off-by: Steffen Trumtrar
6 matches
Mail list logo