Re: [PATCH v3 1/3] dt-bindings: sound: Add DT bindings for Broadcom Cygnus audio

2015-11-09 Thread Rob Herring 
On Fri, Nov 06, 2015 at 06:22:43PM -0800, Simran Rai wrote:
> Add bindings for audio driver in Broadcom Cygnus.
> 
> Signed-off-by: Lori Hikichi 
> Signed-off-by: Simran Rai 
> Reviewed-by: Ray Jui 
> Reviewed-by: Scott Branden 

Acked-by: Rob Herring 


> ---
>  .../bindings/sound/brcm,cygnus-audio.txt   |   54 
> 
>  1 file changed, 54 insertions(+)
>  create mode 100644 
> Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
> 
> diff --git a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt 
> b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
> new file mode 100644
> index 000..3c06001
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
> @@ -0,0 +1,54 @@
> +BROADCOM Cygnus Audio I2S/TDM/SPDIF controller
> +
> +Required properties:
> + - compatible : "brcm,cygnus-audio"
> + - #address-cells: 32bit valued, 1 cell.
> + - #size-cells:  32bit valued, 0 cell.
> + - reg : Should contain audio registers location and length
> + - reg-names: names of the registers listed in "reg" property
> + Valid names are "aud" and "i2s_in". "aud" contains a
> + set of DMA, I2S_OUT and SPDIF registers. "i2s_in" contains
> + a set of I2S_IN registers.
> + - clocks: PLL and leaf clocks used by audio ports
> + - clock-names: names of 3 leaf clocks used by audio ports
> + Valid names are "ch0_audio", "ch1_audio", "ch2_audio"
> + - interrupts: audio DMA interrupt number
> +
> +SSP Subnode properties:
> +- reg: The index of ssp port interface to use
> + Valid value are 0, 1, 2, or 3 (for spdif)
> +
> +
> +Example:
> + cygnus_audio: audio@180ae000 {
> + compatible = "brcm,cygnus-audio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x180ae000 0xafd>, <0x180aec00 0x1f8>;
> + reg-names = "aud", "i2s_in";
> + clocks = < BCM_CYGNUS_AUDIOPLL_CH0>,
> + < BCM_CYGNUS_AUDIOPLL_CH1>,
> + < BCM_CYGNUS_AUDIOPLL_CH2>;
> + clock-names = "ch0_audio", "ch1_audio", "ch2_audio";
> + interrupts = ;
> +
> + ssp0: ssp_port@0 {
> + reg = <0>;
> + status = "okay";
> + };
> +
> + ssp1: ssp_port@1 {
> + reg = <1>;
> + status = "disabled";
> + };
> +
> + ssp2: ssp_port@2 {
> + reg = <2>;
> + status = "disabled";
> + };
> +
> + spdif: spdif_port@3 {
> + reg = <3>;
> + status = "disabled";
> + };
> + };
> -- 
> 1.7.9.5
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Re: [PATCH v3 1/3] dt-bindings: sound: Add DT bindings for Broadcom Cygnus audio

2015-11-09 Thread Rob Herring 
On Fri, Nov 06, 2015 at 06:22:43PM -0800, Simran Rai wrote:
> Add bindings for audio driver in Broadcom Cygnus.
> 
> Signed-off-by: Lori Hikichi 
> Signed-off-by: Simran Rai 
> Reviewed-by: Ray Jui 
> Reviewed-by: Scott Branden 

Acked-by: Rob Herring 


> ---
>  .../bindings/sound/brcm,cygnus-audio.txt   |   54 
> 
>  1 file changed, 54 insertions(+)
>  create mode 100644 
> Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
> 
> diff --git a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt 
> b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
> new file mode 100644
> index 000..3c06001
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
> @@ -0,0 +1,54 @@
> +BROADCOM Cygnus Audio I2S/TDM/SPDIF controller
> +
> +Required properties:
> + - compatible : "brcm,cygnus-audio"
> + - #address-cells: 32bit valued, 1 cell.
> + - #size-cells:  32bit valued, 0 cell.
> + - reg : Should contain audio registers location and length
> + - reg-names: names of the registers listed in "reg" property
> + Valid names are "aud" and "i2s_in". "aud" contains a
> + set of DMA, I2S_OUT and SPDIF registers. "i2s_in" contains
> + a set of I2S_IN registers.
> + - clocks: PLL and leaf clocks used by audio ports
> + - clock-names: names of 3 leaf clocks used by audio ports
> + Valid names are "ch0_audio", "ch1_audio", "ch2_audio"
> + - interrupts: audio DMA interrupt number
> +
> +SSP Subnode properties:
> +- reg: The index of ssp port interface to use
> + Valid value are 0, 1, 2, or 3 (for spdif)
> +
> +
> +Example:
> + cygnus_audio: audio@180ae000 {
> + compatible = "brcm,cygnus-audio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x180ae000 0xafd>, <0x180aec00 0x1f8>;
> + reg-names = "aud", "i2s_in";
> + clocks = < BCM_CYGNUS_AUDIOPLL_CH0>,
> + < BCM_CYGNUS_AUDIOPLL_CH1>,
> + < BCM_CYGNUS_AUDIOPLL_CH2>;
> + clock-names = "ch0_audio", "ch1_audio", "ch2_audio";
> + interrupts = ;
> +
> + ssp0: ssp_port@0 {
> + reg = <0>;
> + status = "okay";
> + };
> +
> + ssp1: ssp_port@1 {
> + reg = <1>;
> + status = "disabled";
> + };
> +
> + ssp2: ssp_port@2 {
> + reg = <2>;
> + status = "disabled";
> + };
> +
> + spdif: spdif_port@3 {
> + reg = <3>;
> + status = "disabled";
> + };
> + };
> -- 
> 1.7.9.5
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[PATCH v3 1/3] dt-bindings: sound: Add DT bindings for Broadcom Cygnus audio

2015-11-06 Thread Simran Rai 
Add bindings for audio driver in Broadcom Cygnus.

Signed-off-by: Lori Hikichi 
Signed-off-by: Simran Rai 
Reviewed-by: Ray Jui 
Reviewed-by: Scott Branden 
---
 .../bindings/sound/brcm,cygnus-audio.txt   |   54 
 1 file changed, 54 insertions(+)
 create mode 100644 
Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt

diff --git a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt 
b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
new file mode 100644
index 000..3c06001
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
@@ -0,0 +1,54 @@
+BROADCOM Cygnus Audio I2S/TDM/SPDIF controller
+
+Required properties:
+   - compatible : "brcm,cygnus-audio"
+   - #address-cells: 32bit valued, 1 cell.
+   - #size-cells:  32bit valued, 0 cell.
+   - reg : Should contain audio registers location and length
+   - reg-names: names of the registers listed in "reg" property
+   Valid names are "aud" and "i2s_in". "aud" contains a
+   set of DMA, I2S_OUT and SPDIF registers. "i2s_in" contains
+   a set of I2S_IN registers.
+   - clocks: PLL and leaf clocks used by audio ports
+   - clock-names: names of 3 leaf clocks used by audio ports
+   Valid names are "ch0_audio", "ch1_audio", "ch2_audio"
+   - interrupts: audio DMA interrupt number
+
+SSP Subnode properties:
+- reg: The index of ssp port interface to use
+   Valid value are 0, 1, 2, or 3 (for spdif)
+
+
+Example:
+   cygnus_audio: audio@180ae000 {
+   compatible = "brcm,cygnus-audio";
+   #address-cells = <1>;
+   #size-cells = <0>;
+   reg = <0x180ae000 0xafd>, <0x180aec00 0x1f8>;
+   reg-names = "aud", "i2s_in";
+   clocks = < BCM_CYGNUS_AUDIOPLL_CH0>,
+   < BCM_CYGNUS_AUDIOPLL_CH1>,
+   < BCM_CYGNUS_AUDIOPLL_CH2>;
+   clock-names = "ch0_audio", "ch1_audio", "ch2_audio";
+   interrupts = ;
+
+   ssp0: ssp_port@0 {
+   reg = <0>;
+   status = "okay";
+   };
+
+   ssp1: ssp_port@1 {
+   reg = <1>;
+   status = "disabled";
+   };
+
+   ssp2: ssp_port@2 {
+   reg = <2>;
+   status = "disabled";
+   };
+
+   spdif: spdif_port@3 {
+   reg = <3>;
+   status = "disabled";
+   };
+   };
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[PATCH v3 1/3] dt-bindings: sound: Add DT bindings for Broadcom Cygnus audio

2015-11-06 Thread Simran Rai 
Add bindings for audio driver in Broadcom Cygnus.

Signed-off-by: Lori Hikichi 
Signed-off-by: Simran Rai 
Reviewed-by: Ray Jui 
Reviewed-by: Scott Branden 
---
 .../bindings/sound/brcm,cygnus-audio.txt   |   54 
 1 file changed, 54 insertions(+)
 create mode 100644 
Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt

diff --git a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt 
b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
new file mode 100644
index 000..3c06001
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
@@ -0,0 +1,54 @@
+BROADCOM Cygnus Audio I2S/TDM/SPDIF controller
+
+Required properties:
+   - compatible : "brcm,cygnus-audio"
+   - #address-cells: 32bit valued, 1 cell.
+   - #size-cells:  32bit valued, 0 cell.
+   - reg : Should contain audio registers location and length
+   - reg-names: names of the registers listed in "reg" property
+   Valid names are "aud" and "i2s_in". "aud" contains a
+   set of DMA, I2S_OUT and SPDIF registers. "i2s_in" contains
+   a set of I2S_IN registers.
+   - clocks: PLL and leaf clocks used by audio ports
+   - clock-names: names of 3 leaf clocks used by audio ports
+   Valid names are "ch0_audio", "ch1_audio", "ch2_audio"
+   - interrupts: audio DMA interrupt number
+
+SSP Subnode properties:
+- reg: The index of ssp port interface to use
+   Valid value are 0, 1, 2, or 3 (for spdif)
+
+
+Example:
+   cygnus_audio: audio@180ae000 {
+   compatible = "brcm,cygnus-audio";
+   #address-cells = <1>;
+   #size-cells = <0>;
+   reg = <0x180ae000 0xafd>, <0x180aec00 0x1f8>;
+   reg-names = "aud", "i2s_in";
+   clocks = < BCM_CYGNUS_AUDIOPLL_CH0>,
+   < BCM_CYGNUS_AUDIOPLL_CH1>,
+   < BCM_CYGNUS_AUDIOPLL_CH2>;
+   clock-names = "ch0_audio", "ch1_audio", "ch2_audio";
+   interrupts = ;
+
+   ssp0: ssp_port@0 {
+   reg = <0>;
+   status = "okay";
+   };
+
+   ssp1: ssp_port@1 {
+   reg = <1>;
+   status = "disabled";
+   };
+
+   ssp2: ssp_port@2 {
+   reg = <2>;
+   status = "disabled";
+   };
+
+   spdif: spdif_port@3 {
+   reg = <3>;
+   status = "disabled";
+   };
+   };
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/