On Thu, May 16, 2013 at 3:22 PM, Dan Murphy wrote:
> On 05/16/2013 01:18 PM, Nishanth Menon wrote:
>> On Thu, May 16, 2013 at 10:35 AM, Dan Murphy wrote:
>>> I am not sure you really want to do this.
>>> If I make the pinctrl part of the led structure then the only way the
>>> gpio_wk7 on a1-a3
On 05/16/2013 01:18 PM, Nishanth Menon wrote:
> On Thu, May 16, 2013 at 10:35 AM, Dan Murphy wrote:
>> I am not sure you really want to do this.
>> If I make the pinctrl part of the led structure then the only way the
>> gpio_wk7 on a1-a3 to be configured is when
>> the CONFIG_LEDS_GPIO flag is
On Thu, May 16, 2013 at 10:35 AM, Dan Murphy wrote:
> I am not sure you really want to do this.
> If I make the pinctrl part of the led structure then the only way the
> gpio_wk7 on a1-a3 to be configured is when
> the CONFIG_LEDS_GPIO flag is set.
>
> Do you really want that dependency? You
On 05/15/2013 12:05 PM, Nishanth Menon wrote:
> On 11:46-20130515, Dan Murphy wrote:
>> The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es
>> are different.
>>
>> A1-A3 = gpio_wk7
>> ES = gpio_110
>>
>> There is no change to LED D2
>>
>> Abstract away the pinmux and the LED
On 05/15/2013 12:05 PM, Nishanth Menon wrote:
On 11:46-20130515, Dan Murphy wrote:
The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es
are different.
A1-A3 = gpio_wk7
ES = gpio_110
There is no change to LED D2
Abstract away the pinmux and the LED definitions for the
On Thu, May 16, 2013 at 10:35 AM, Dan Murphy dmur...@ti.com wrote:
I am not sure you really want to do this.
If I make the pinctrl part of the led structure then the only way the
gpio_wk7 on a1-a3 to be configured is when
the CONFIG_LEDS_GPIO flag is set.
Do you really want that dependency?
On 05/16/2013 01:18 PM, Nishanth Menon wrote:
On Thu, May 16, 2013 at 10:35 AM, Dan Murphy dmur...@ti.com wrote:
I am not sure you really want to do this.
If I make the pinctrl part of the led structure then the only way the
gpio_wk7 on a1-a3 to be configured is when
the CONFIG_LEDS_GPIO
On Thu, May 16, 2013 at 3:22 PM, Dan Murphy dmur...@ti.com wrote:
On 05/16/2013 01:18 PM, Nishanth Menon wrote:
On Thu, May 16, 2013 at 10:35 AM, Dan Murphy dmur...@ti.com wrote:
I am not sure you really want to do this.
If I make the pinctrl part of the led structure then the only way the
On 11:46-20130515, Dan Murphy wrote:
> The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es
> are different.
>
> A1-A3 = gpio_wk7
> ES = gpio_110
>
> There is no change to LED D2
>
> Abstract away the pinmux and the LED definitions for the two boards into
> the respective DTS
The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es
are different.
A1-A3 = gpio_wk7
ES = gpio_110
There is no change to LED D2
Abstract away the pinmux and the LED definitions for the two boards into
the respective DTS files.
Signed-off-by: Dan Murphy
---
The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es
are different.
A1-A3 = gpio_wk7
ES = gpio_110
There is no change to LED D2
Abstract away the pinmux and the LED definitions for the two boards into
the respective DTS files.
Signed-off-by: Dan Murphy dmur...@ti.com
---
On 11:46-20130515, Dan Murphy wrote:
The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es
are different.
A1-A3 = gpio_wk7
ES = gpio_110
There is no change to LED D2
Abstract away the pinmux and the LED definitions for the two boards into
the respective DTS files.
12 matches
Mail list logo
