[PATCH v6 0/2] Add a new Rockchip usb2 phy driver
The newer SoCs (rk3366, rk3399) of Rock-chip take a different usb-phy IP block than rk3288 and before, and most of phy-related registers are also different from the past, so a new phy driver is required necessarily. These series patches add phy-rockchip-inno-usb2.c and the corresponding documentation. Changes in v6: - Changed '_' to '-' for otg-id and otg-bvalid property in devicetree bindings. - Fixed the output clock would be disabled more than once while phy-port was going to suspend. - Improved the driver to avoid the currently empty otg-port would cause null-pointer dereferences. Changes in v5: - Added 'reg' property both in devicetree bindings and driver to match the different phy-blocks. Changes in v4: - Used 'phy-supply' instead of 'vbus_*-supply'. Changes in v3: - Supplemented some hardware-description into the devicetree bindings. - Resolved the mapping defect between fixed value in driver and the property in devicetree. - Code cleanup. Changes in v2: - Specified more hardware-description into the devicetree bindings. - Optimized some process of driver. Frank Wang (2): Documentation: bindings: add DT documentation for Rockchip USB2PHY phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy .../bindings/phy/phy-rockchip-inno-usb2.txt| 64 ++ drivers/phy/Kconfig|7 + drivers/phy/Makefile |1 + drivers/phy/phy-rockchip-inno-usb2.c | 655 4 files changed, 727 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt create mode 100644 drivers/phy/phy-rockchip-inno-usb2.c -- 1.7.9.5
[PATCH v6 0/2] Add a new Rockchip usb2 phy driver
The newer SoCs (rk3366, rk3399) of Rock-chip take a different usb-phy IP block than rk3288 and before, and most of phy-related registers are also different from the past, so a new phy driver is required necessarily. These series patches add phy-rockchip-inno-usb2.c and the corresponding documentation. Changes in v6: - Changed '_' to '-' for otg-id and otg-bvalid property in devicetree bindings. - Fixed the output clock would be disabled more than once while phy-port was going to suspend. - Improved the driver to avoid the currently empty otg-port would cause null-pointer dereferences. Changes in v5: - Added 'reg' property both in devicetree bindings and driver to match the different phy-blocks. Changes in v4: - Used 'phy-supply' instead of 'vbus_*-supply'. Changes in v3: - Supplemented some hardware-description into the devicetree bindings. - Resolved the mapping defect between fixed value in driver and the property in devicetree. - Code cleanup. Changes in v2: - Specified more hardware-description into the devicetree bindings. - Optimized some process of driver. Frank Wang (2): Documentation: bindings: add DT documentation for Rockchip USB2PHY phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy .../bindings/phy/phy-rockchip-inno-usb2.txt| 64 ++ drivers/phy/Kconfig|7 + drivers/phy/Makefile |1 + drivers/phy/phy-rockchip-inno-usb2.c | 655 4 files changed, 727 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt create mode 100644 drivers/phy/phy-rockchip-inno-usb2.c -- 1.7.9.5
