On Wed, Aug 14, 2013 at 12:28:17PM +0300, Ivan T. Ivanov wrote:
>
> Hi,
>
> On Mon, 2013-08-12 at 13:24 -0500, Felipe Balbi wrote:
> > On Fri, Aug 09, 2013 at 07:09:18PM +0300, Ivan T. Ivanov wrote:
> > > Hi,
> > >
> > > On Fri, 2013-08-09 at 16:23 +0300, Felipe Balbi wrote:
> > > > Hi,
> > >
Hi,
On Fri, 2013-08-09 at 16:23 +0300, Felipe Balbi wrote:
>
> > + /*
> > +* DWC3 Core requires its CORE CLK (aka master / bus clk) to
> > +* run at 125Mhz in SSUSB mode and >60MHZ for HSUSB mode.
> > +*/
> > + clk_set_rate(mdwc->core_clk, 12500);
>
> if this is dwc3's co
Hi,
On Mon, 2013-08-12 at 13:24 -0500, Felipe Balbi wrote:
> On Fri, Aug 09, 2013 at 07:09:18PM +0300, Ivan T. Ivanov wrote:
> > Hi,
> >
> > On Fri, 2013-08-09 at 16:23 +0300, Felipe Balbi wrote:
> > > Hi,
> > >
> > > On Tue, Aug 06, 2013 at 02:53:11PM +0300, Ivan T. Ivanov wrote:
> > > > di
On Fri, Aug 09, 2013 at 07:09:18PM +0300, Ivan T. Ivanov wrote:
> Hi,
>
> On Fri, 2013-08-09 at 16:23 +0300, Felipe Balbi wrote:
> > Hi,
> >
> > On Tue, Aug 06, 2013 at 02:53:11PM +0300, Ivan T. Ivanov wrote:
> > > diff --git a/drivers/usb/dwc3/dwc3-msm.c b/drivers/usb/dwc3/dwc3-msm.c
> > > new
Hi,
On Fri, 2013-08-09 at 16:23 +0300, Felipe Balbi wrote:
> Hi,
>
> On Tue, Aug 06, 2013 at 02:53:11PM +0300, Ivan T. Ivanov wrote:
> > diff --git a/drivers/usb/dwc3/dwc3-msm.c b/drivers/usb/dwc3/dwc3-msm.c
> > new file mode 100644
> > index 000..e509abc
> > --- /dev/null
> > +++ b/drivers/
Hi,
On Tue, Aug 06, 2013 at 01:21:38PM +0100, Pawel Moll wrote:
> > @@ -47,3 +64,25 @@ Example device nodes:
> > vddcx-supply = <&supply>;
> > v1p8-supply = <&supply>;
> > };
> > +
> > + usb@fd4ab000 {
> > + compatible = "qcom,dwc-usb3-msm";
> > +
Hi,
On Tue, Aug 06, 2013 at 02:53:11PM +0300, Ivan T. Ivanov wrote:
> diff --git a/drivers/usb/dwc3/dwc3-msm.c b/drivers/usb/dwc3/dwc3-msm.c
> new file mode 100644
> index 000..e509abc
> --- /dev/null
> +++ b/drivers/usb/dwc3/dwc3-msm.c
> @@ -0,0 +1,175 @@
> +#undef CONFIG_REGULATOR
why ?
On Tue, 2013-08-06 at 16:15 +0100, Pawel Moll wrote:
> On Tue, 2013-08-06 at 14:46 +0100, Ivan T. Ivanov wrote:
> > > > + reg = <0xf920 0xcd00>;
> > > > + interrupts = <0 131 0>;
> > > > + interrupt-names = "irq";
> > > > +
On Tue, 2013-08-06 at 14:46 +0100, Ivan T. Ivanov wrote:
> > > + reg = <0xf920 0xcd00>;
> > > + interrupts = <0 131 0>;
> > > + interrupt-names = "irq";
> > > + usb-phy = <&dwc3_usb2>, <&dwc3_usb3>;
> > > + tx-fifo-
Hi,
On Tue, 2013-08-06 at 15:07 +0100, Mark Rutland wrote:
> On Tue, Aug 06, 2013 at 12:53:11PM +0100, Ivan T. Ivanov wrote:
> > From: "Ivan T. Ivanov"
>
> What does the "glue layer" do? Is it an actual piece of hardware, or
> just some platform-specific code?
>
It is hardware layer around S
On Tue, Aug 06, 2013 at 12:53:11PM +0100, Ivan T. Ivanov wrote:
> From: "Ivan T. Ivanov"
What does the "glue layer" do? Is it an actual piece of hardware, or
just some platform-specific code?
>
> Signed-off-by: Ivan T. Ivanov
> ---
> .../devicetree/bindings/usb/msm-ssusb.txt | 39 +
On Tue, 2013-08-06 at 13:21 +0100, Pawel Moll wrote:
> On Tue, 2013-08-06 at 12:53 +0100, Ivan T. Ivanov wrote:
> > From: "Ivan T. Ivanov"
> >
> > Signed-off-by: Ivan T. Ivanov
>
> The same comment as for the RFC 1/2 here...
Will fix this.
>
> > .../devicetree/bindings/usb/msm-ssusb.txt
On Tue, 2013-08-06 at 12:53 +0100, Ivan T. Ivanov wrote:
> From: "Ivan T. Ivanov"
>
> Signed-off-by: Ivan T. Ivanov
The same comment as for the RFC 1/2 here...
> .../devicetree/bindings/usb/msm-ssusb.txt | 39 +
> drivers/usb/dwc3/Kconfig |8 +
> d
From: "Ivan T. Ivanov"
Signed-off-by: Ivan T. Ivanov
---
.../devicetree/bindings/usb/msm-ssusb.txt | 39 +
drivers/usb/dwc3/Kconfig |8 +
drivers/usb/dwc3/Makefile |1 +
drivers/usb/dwc3/dwc3-msm.c
14 matches
Mail list logo
