On Wed, Jan 6, 2021 at 4:17 PM Martin Blumenstingl
wrote:
> > > unfortunately this means that xhci-pci now depends on xhci-pci-etron.
> > > for xhci-pci-renesas this is fine (I think) because that part of the
> > > code is needed to get the xHCI controller going
> > > but for xhci-pci-etron this
Hi Linus,
On Tue, Jan 5, 2021 at 11:23 PM Linus Walleij wrote:
>
> On Mon, Dec 21, 2020 at 4:28 PM Martin Blumenstingl
> wrote:
> > On Wed, Oct 7, 2020 at 9:44 PM Martin Blumenstingl
> > wrote:
> > [...]
> > > > As noted on the earlier patches I think this should be folded into the
> > > >
On Mon, Dec 21, 2020 at 4:28 PM Martin Blumenstingl
wrote:
> On Wed, Oct 7, 2020 at 9:44 PM Martin Blumenstingl
> wrote:
> [...]
> > > As noted on the earlier patches I think this should be folded into the
> > > existing XHCI USB driver in drivers/usb/host/xhci-pci.c or, if that
> > > gets
Hi Linus,
On Mon, Dec 21, 2020 at 4:28 PM Martin Blumenstingl
wrote:
>
> Hi Linus,
>
> On Wed, Oct 7, 2020 at 9:44 PM Martin Blumenstingl
> wrote:
> [...]
> > > As noted on the earlier patches I think this should be folded into the
> > > existing XHCI USB driver in drivers/usb/host/xhci-pci.c
Hi Linus,
On Wed, Oct 7, 2020 at 9:44 PM Martin Blumenstingl
wrote:
[...]
> > As noted on the earlier patches I think this should be folded into the
> > existing XHCI USB driver in drivers/usb/host/xhci-pci.c or, if that
> > gets messy, as a separate bolt-on, something like
> >
Hi Linus,
On Wed, Oct 7, 2020 at 11:29 AM Linus Walleij wrote:
>
> Hi Martin,
>
> thanks for your patch!
thank you for reviewing the whole series!
> As noted on the earlier patches I think this should be folded into the
> existing XHCI USB driver in drivers/usb/host/xhci-pci.c or, if that
>
Hi Martin,
thanks for your patch!
As noted on the earlier patches I think this should be folded into the
existing XHCI USB driver in drivers/usb/host/xhci-pci.c or, if that
gets messy, as a separate bolt-on, something like
xhci-pci-gpio.[c|h] in the drivers/usb/host/* directory.
You can use a
EJ168/EJ188/EJ198 are USB xHCI controllers. They also contain four GPIO
lines which are used on some systems to toggle an LED based on whether a
USB device is connected.
There is no public datasheet available for this hardware. All
information in this driver is taken from the
8 matches
Mail list logo
