Hi Julian,
thank you for the review. You're right. I added the pinctrl client
nodes. Also the patches were split incorrectly, so I fixed that too.
regards,
Ondrej
On 24.6.2016 04:51, Julian Calaby wrote:
> Hi Ondrej,
>
> On Fri, Jun 24, 2016 at 5:21 AM, wrote:
>> From: Ondrej Jirman
>>
>>
Hi Ondrej,
On Fri, Jun 24, 2016 at 5:21 AM, wrote:
> From: Ondrej Jirman
>
> Xulong Orange Pi One uses GPIO based regulator that
> switches between two voltages: 1.1V and 1.3V. The
> regulator is controlled from the PL6 pin.
>
> Signed-off-by: Ondrej Jirman
> ---
> arch/arm/boot/dts/sun8i-h3-
Hi Ondrej,
On Fri, Jun 24, 2016 at 5:21 AM, wrote:
> From: Ondrej Jirman
>
> Xulong Orange Pi One uses GPIO based regulator that
> switches between two voltages: 1.1V and 1.3V. The
> regulator is controlled from the PL6 pin.
>
> Signed-off-by: Ondrej Jirman
> ---
> arch/arm/boot/dts/sun8i-h3-
3 matches
Mail list logo