Pavel Machek wrote:
>
> Hi!
>
> > anything. So I removed the three pin cross connect that connects the
> > card to the WOL header on the motherboard. That fixed it for a few
> > days, but now it's doing it again, even without the cable installed.
> > the only fix is to unplug the ethernet
Pavel Machek wrote:
Hi!
anything. So I removed the three pin cross connect that connects the
card to the WOL header on the motherboard. That fixed it for a few
days, but now it's doing it again, even without the cable installed.
the only fix is to unplug the ethernet cable when I
Hi!
> anything. So I removed the three pin cross connect that connects the
> card to the WOL header on the motherboard. That fixed it for a few
> days, but now it's doing it again, even without the cable installed.
> the only fix is to unplug the ethernet cable when I turn it off.
So turn
Hi!
anything. So I removed the three pin cross connect that connects the
card to the WOL header on the motherboard. That fixed it for a few
days, but now it's doing it again, even without the cable installed.
the only fix is to unplug the ethernet cable when I turn it off.
So turn it
Thanks, I'll try to take a look at the source if I get a chance next
week. Any tulip developers out there know off hand if this is enabled?
Or can be disabled?
Thanks,
Alex
David Christensen wrote:
>
> Alex,
>
> Looking at the back of a Linksys EtherFast 10/100 manual I happen to have,
>
Thanks, I'll try to take a look at the source if I get a chance next
week. Any tulip developers out there know off hand if this is enabled?
Or can be disabled?
Thanks,
Alex
David Christensen wrote:
Alex,
Looking at the back of a Linksys EtherFast 10/100 manual I happen to have,
they
Alex,
Looking at the back of a Linksys EtherFast 10/100 manual I happen to have,
they describe two different remote wake-up events, Magic Packet and Link
Change. The first one is pretty obvious and is probably not related to
your problems, but the second one may be. The manual states ""Link
I have an athlon system with a iwill kk266 motherboard (via kt133A). I
have a linksys 10/100 PCI ethernet card with wake on lan capabilities.
Anyway, when I shut the PC down it turns off, but refuses to stay off.
Within a minute or two, it turns itself on again. If i run over and
turn it off
I have an athlon system with a iwill kk266 motherboard (via kt133A). I
have a linksys 10/100 PCI ethernet card with wake on lan capabilities.
Anyway, when I shut the PC down it turns off, but refuses to stay off.
Within a minute or two, it turns itself on again. If i run over and
turn it off
Alex,
Looking at the back of a Linksys EtherFast 10/100 manual I happen to have,
they describe two different remote wake-up events, Magic Packet and Link
Change. The first one is pretty obvious and is probably not related to
your problems, but the second one may be. The manual states Link
10 matches
Mail list logo
