Forgot to mentioned: This patch is based on "[V4,3/5] arm64: dts: imx: add 
imx8qxp support", https://patchwork.kernel.org/patch/10677311/

Best Regards!
Anson Huang

> -----Original Message-----
> From: Anson Huang
> Sent: 2018年11月27日 14:19
> To: robh...@kernel.org; mark.rutl...@arm.com; Aisheng DONG
> <aisheng.d...@nxp.com>; devicet...@vger.kernel.org;
> linux-kernel@vger.kernel.org; shawn...@kernel.org
> Cc: dl-linux-imx <linux-...@nxp.com>
> Subject: [PATCH] ARM64: dts: imx: add i.MX8QXP thermal support
> 
> Add i.MX8QXP CPU thermal zone support.
> 
> Signed-off-by: Anson Huang <anson.hu...@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 27
> +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> index da99b6f..9155d45 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> @@ -9,6 +9,7 @@
>  #include <dt-bindings/firmware/imx/rsrc.h>  #include
> <dt-bindings/gpio/gpio.h>  #include <dt-bindings/pinctrl/pads-imx8qxp.h>
> +#include <dt-bindings/thermal/thermal.h>
> 
>  #include "imx8-ca35.dtsi"
> 
> @@ -85,6 +86,32 @@
>               };
>       };
> 
> +     tsens: thermal-sensor {
> +             compatible = "nxp,imx8qxp-sc-thermal";
> +             tsens-num = <1>;
> +             #thermal-sensor-cells = <1>;
> +     };
> +
> +     thermal_zones: thermal-zones {
> +             cpu-thermal0 {
> +                     polling-delay-passive = <250>;
> +                     polling-delay = <2000>;
> +                     thermal-sensors = <&tsens 355>;
> +                     trips {
> +                             cpu_alert0: trip0 {
> +                                     temperature = <107000>;
> +                                     hysteresis = <2000>;
> +                                     type = "passive";
> +                             };
> +                             cpu_crit0: trip1 {
> +                                     temperature = <127000>;
> +                                     hysteresis = <2000>;
> +                                     type = "critical";
> +                             };
> +                     };
> +             };
> +     };
> +
>       adma_subsys: bus@59000000 {
>               compatible = "simple-bus";
>               #address-cells = <1>;
> --
> 2.7.4

Reply via email to