RE: [PATCH] optee: enable apci support
Hi Ard, On Thursday, March 18, 2021 3:48 PM, Ard Biesheuvel wrote: > > On Thu, 18 Mar 2021 at 08:29, Ran Wang wrote: > > > > Hi Ard, > > > > > > On Wednesday, March 17, 2021 4:29 PM, Ard Biesheuvel wrote: > > > > > > On Wed, 17 Mar 2021 at 09:04, Jens Wiklander > > > wrote: > > > > > > > > On Fri, Mar 12, 2021 at 04:36:53PM +0800, Ran Wang wrote: > > > > > This patch add ACPI support for optee driver. > > > > > > > > > > Signed-off-by: Ran Wang > > > > > --- > > > > > drivers/tee/optee/core.c | 10 ++ > > > > > 1 file changed, 10 insertions(+) > > > > > > > > > > diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c > > > > > index cf4718c6d35d..8fb261f4b9db 100644 > > > > > --- a/drivers/tee/optee/core.c > > > > > +++ b/drivers/tee/optee/core.c > > > > > @@ -5,6 +5,7 @@ > > > > > > > > > > #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > > > > > > > > > > +#include > > > > > #include > > > > > #include > > > > > #include > > > > > @@ -735,12 +736,21 @@ static const struct of_device_id > > > > > optee_dt_match[] = { }; MODULE_DEVICE_TABLE(of, > > > > > optee_dt_match); > > > > > > > > > > +#ifdef CONFIG_ACPI > > > > > +static const struct acpi_device_id optee_acpi_match[] = { > > > > > + { "OPTEE01",}, > > > > > > You cannot just invent ACPI HIDs like that. The 4 character prefix > > > is a vendor ID that is assigned by the UEFI forum, the 4 following > > > digits are up to the vendor to assign, > > > > Thanks for this info. Could you please show me where I can find the > > guide/example for this assign process? > > > > I think it is better to ask around internally. As far as I know, NXP already > owns a ACPI/PNP vendor prefix. OK > > > > > + { }, > > > > > +}; > > > > > +MODULE_DEVICE_TABLE(acpi, dwc3_acpi_match); > > > > > > dwc3_acpi_match ?? Does this even build? > > > > My bad, I was referring dwc3 code as an example, will correct it. > > > > But looks this typo didn’t trigger error in my unit-test. > > > > Does your build have CONFIG_ACPI enabled? Yes > > > > > > > > +#endif > > > > > + > > > > > static struct platform_driver optee_driver = { > > > > > .probe = optee_probe, > > > > > .remove = optee_remove, > > > > > .driver = { > > > > > .name = "optee", > > > > > .of_match_table = optee_dt_match, > > > > > + .acpi_match_table = ACPI_PTR(optee_acpi_match), > > > > > }, > > > > > }; > > > > > module_platform_driver(optee_driver); > > > > > -- > > > > > 2.25.1 > > > > > > > > > > > > > This looks simple enough. Ard, is this what you had in mind earlier? > > > > > > > > > > Not really. > > > > > > On SynQuacer, we use > > > > > > Device (TOS0) { > > > Name (_HID, "PRP0001") > > > Name (_UID, 0x0) > > > Name (_DSD, Package () { > > > ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), > > > Package () { > > > Package (2) { "compatible", "linaro,optee-tz" }, > > > Package (2) { "method", "smc" }, > > > } > > > }) > > > } > > > > > > which does not require any changes to Linux. So I don't think this patch > > > is needed at all tbh. > > > > Thanks for this example, but actually I failed to trigger kernel optee > > probe function by using above code in ACPI table. > > > > And I am curious how this 'compatible' properties be picked up by kernel > > when try to match driver in ACPI mode? > > > > On SynQuacer, > > $ cat /sys/devices/platform/PRP0001:00/firmware_node/modalias > of:Ntos0TClinaro,optee-tz > > > My understanding is to get it done by feeding .acpi_match_table with > > something, right? > > > > The PRP0001 HID is handled in a special way. Please grep the Linux source if > you are curious to understand how this is implemented. Yes, my failure is due to without PRP0001, and I have found the Doc in kernel code explaining that. Now it works fine on my side :) Thanks for the educate! Regards, Ran
Re: [PATCH] optee: enable apci support
On Thu, 18 Mar 2021 at 08:29, Ran Wang wrote: > > Hi Ard, > > > On Wednesday, March 17, 2021 4:29 PM, Ard Biesheuvel wrote: > > > > On Wed, 17 Mar 2021 at 09:04, Jens Wiklander > > wrote: > > > > > > On Fri, Mar 12, 2021 at 04:36:53PM +0800, Ran Wang wrote: > > > > This patch add ACPI support for optee driver. > > > > > > > > Signed-off-by: Ran Wang > > > > --- > > > > drivers/tee/optee/core.c | 10 ++ > > > > 1 file changed, 10 insertions(+) > > > > > > > > diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c > > > > index cf4718c6d35d..8fb261f4b9db 100644 > > > > --- a/drivers/tee/optee/core.c > > > > +++ b/drivers/tee/optee/core.c > > > > @@ -5,6 +5,7 @@ > > > > > > > > #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > > > > > > > > +#include > > > > #include > > > > #include > > > > #include > > > > @@ -735,12 +736,21 @@ static const struct of_device_id > > > > optee_dt_match[] = { }; MODULE_DEVICE_TABLE(of, optee_dt_match); > > > > > > > > +#ifdef CONFIG_ACPI > > > > +static const struct acpi_device_id optee_acpi_match[] = { > > > > + { "OPTEE01",}, > > > > You cannot just invent ACPI HIDs like that. The 4 character prefix is a > > vendor ID that is assigned by the UEFI forum, the 4 following digits are > > up to the vendor to assign, > > Thanks for this info. Could you please show me where I can find the > guide/example for this assign process? > I think it is better to ask around internally. As far as I know, NXP already owns a ACPI/PNP vendor prefix. > > > > + { }, > > > > +}; > > > > +MODULE_DEVICE_TABLE(acpi, dwc3_acpi_match); > > > > dwc3_acpi_match ?? Does this even build? > > My bad, I was referring dwc3 code as an example, will correct it. > > But looks this typo didn’t trigger error in my unit-test. > Does your build have CONFIG_ACPI enabled? > > > > > > +#endif > > > > + > > > > static struct platform_driver optee_driver = { > > > > .probe = optee_probe, > > > > .remove = optee_remove, > > > > .driver = { > > > > .name = "optee", > > > > .of_match_table = optee_dt_match, > > > > + .acpi_match_table = ACPI_PTR(optee_acpi_match), > > > > }, > > > > }; > > > > module_platform_driver(optee_driver); > > > > -- > > > > 2.25.1 > > > > > > > > > > This looks simple enough. Ard, is this what you had in mind earlier? > > > > > > > Not really. > > > > On SynQuacer, we use > > > > Device (TOS0) { > > Name (_HID, "PRP0001") > > Name (_UID, 0x0) > > Name (_DSD, Package () { > > ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), > > Package () { > > Package (2) { "compatible", "linaro,optee-tz" }, > > Package (2) { "method", "smc" }, > > } > > }) > > } > > > > which does not require any changes to Linux. So I don't think this patch is > > needed at all tbh. > > Thanks for this example, but actually I failed to trigger kernel optee probe > function by using > above code in ACPI table. > > And I am curious how this 'compatible' properties be picked up by kernel when > try to match driver in ACPI mode? > On SynQuacer, $ cat /sys/devices/platform/PRP0001:00/firmware_node/modalias of:Ntos0TClinaro,optee-tz > My understanding is to get it done by feeding .acpi_match_table with > something, right? > The PRP0001 HID is handled in a special way. Please grep the Linux source if you are curious to understand how this is implemented.
RE: [PATCH] optee: enable apci support
Hi Ard, On Wednesday, March 17, 2021 4:29 PM, Ard Biesheuvel wrote: > > On Wed, 17 Mar 2021 at 09:04, Jens Wiklander > wrote: > > > > On Fri, Mar 12, 2021 at 04:36:53PM +0800, Ran Wang wrote: > > > This patch add ACPI support for optee driver. > > > > > > Signed-off-by: Ran Wang > > > --- > > > drivers/tee/optee/core.c | 10 ++ > > > 1 file changed, 10 insertions(+) > > > > > > diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c > > > index cf4718c6d35d..8fb261f4b9db 100644 > > > --- a/drivers/tee/optee/core.c > > > +++ b/drivers/tee/optee/core.c > > > @@ -5,6 +5,7 @@ > > > > > > #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > > > > > > +#include > > > #include > > > #include > > > #include > > > @@ -735,12 +736,21 @@ static const struct of_device_id > > > optee_dt_match[] = { }; MODULE_DEVICE_TABLE(of, optee_dt_match); > > > > > > +#ifdef CONFIG_ACPI > > > +static const struct acpi_device_id optee_acpi_match[] = { > > > + { "OPTEE01",}, > > You cannot just invent ACPI HIDs like that. The 4 character prefix is a > vendor ID that is assigned by the UEFI forum, the 4 following digits are > up to the vendor to assign, Thanks for this info. Could you please show me where I can find the guide/example for this assign process? > > > + { }, > > > +}; > > > +MODULE_DEVICE_TABLE(acpi, dwc3_acpi_match); > > dwc3_acpi_match ?? Does this even build? My bad, I was referring dwc3 code as an example, will correct it. But looks this typo didn’t trigger error in my unit-test. > > > > +#endif > > > + > > > static struct platform_driver optee_driver = { > > > .probe = optee_probe, > > > .remove = optee_remove, > > > .driver = { > > > .name = "optee", > > > .of_match_table = optee_dt_match, > > > + .acpi_match_table = ACPI_PTR(optee_acpi_match), > > > }, > > > }; > > > module_platform_driver(optee_driver); > > > -- > > > 2.25.1 > > > > > > > This looks simple enough. Ard, is this what you had in mind earlier? > > > > Not really. > > On SynQuacer, we use > > Device (TOS0) { > Name (_HID, "PRP0001") > Name (_UID, 0x0) > Name (_DSD, Package () { > ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), > Package () { > Package (2) { "compatible", "linaro,optee-tz" }, > Package (2) { "method", "smc" }, > } > }) > } > > which does not require any changes to Linux. So I don't think this patch is > needed at all tbh. Thanks for this example, but actually I failed to trigger kernel optee probe function by using above code in ACPI table. And I am curious how this 'compatible' properties be picked up by kernel when try to match driver in ACPI mode? My understanding is to get it done by feeding .acpi_match_table with something, right? Regards, Ran
Re: [PATCH] optee: enable apci support
On Wed, 17 Mar 2021 at 09:04, Jens Wiklander wrote: > > On Fri, Mar 12, 2021 at 04:36:53PM +0800, Ran Wang wrote: > > This patch add ACPI support for optee driver. > > > > Signed-off-by: Ran Wang > > --- > > drivers/tee/optee/core.c | 10 ++ > > 1 file changed, 10 insertions(+) > > > > diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c > > index cf4718c6d35d..8fb261f4b9db 100644 > > --- a/drivers/tee/optee/core.c > > +++ b/drivers/tee/optee/core.c > > @@ -5,6 +5,7 @@ > > > > #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > > > > +#include > > #include > > #include > > #include > > @@ -735,12 +736,21 @@ static const struct of_device_id optee_dt_match[] = { > > }; > > MODULE_DEVICE_TABLE(of, optee_dt_match); > > > > +#ifdef CONFIG_ACPI > > +static const struct acpi_device_id optee_acpi_match[] = { > > + { "OPTEE01",}, You cannot just invent ACPI HIDs like that. The 4 character prefix is a vendor ID that is assigned by the UEFI forum, the 4 following digits are up to the vendor to assign, > > + { }, > > +}; > > +MODULE_DEVICE_TABLE(acpi, dwc3_acpi_match); dwc3_acpi_match ?? Does this even build? > > +#endif > > + > > static struct platform_driver optee_driver = { > > .probe = optee_probe, > > .remove = optee_remove, > > .driver = { > > .name = "optee", > > .of_match_table = optee_dt_match, > > + .acpi_match_table = ACPI_PTR(optee_acpi_match), > > }, > > }; > > module_platform_driver(optee_driver); > > -- > > 2.25.1 > > > > This looks simple enough. Ard, is this what you had in mind earlier? > Not really. On SynQuacer, we use Device (TOS0) { Name (_HID, "PRP0001") Name (_UID, 0x0) Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package (2) { "compatible", "linaro,optee-tz" }, Package (2) { "method", "smc" }, } }) } which does not require any changes to Linux. So I don't think this patch is needed at all tbh.
Re: [PATCH] optee: enable apci support
On Fri, Mar 12, 2021 at 04:36:53PM +0800, Ran Wang wrote: > This patch add ACPI support for optee driver. > > Signed-off-by: Ran Wang > --- > drivers/tee/optee/core.c | 10 ++ > 1 file changed, 10 insertions(+) > > diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c > index cf4718c6d35d..8fb261f4b9db 100644 > --- a/drivers/tee/optee/core.c > +++ b/drivers/tee/optee/core.c > @@ -5,6 +5,7 @@ > > #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > > +#include > #include > #include > #include > @@ -735,12 +736,21 @@ static const struct of_device_id optee_dt_match[] = { > }; > MODULE_DEVICE_TABLE(of, optee_dt_match); > > +#ifdef CONFIG_ACPI > +static const struct acpi_device_id optee_acpi_match[] = { > + { "OPTEE01",}, > + { }, > +}; > +MODULE_DEVICE_TABLE(acpi, dwc3_acpi_match); > +#endif > + > static struct platform_driver optee_driver = { > .probe = optee_probe, > .remove = optee_remove, > .driver = { > .name = "optee", > .of_match_table = optee_dt_match, > + .acpi_match_table = ACPI_PTR(optee_acpi_match), > }, > }; > module_platform_driver(optee_driver); > -- > 2.25.1 > This looks simple enough. Ard, is this what you had in mind earlier? Thanks, Jens