Re: MCP55 NCQ problem?
Zoltan Boszormenyi írta:
Hi,
Peer Chen írta:
Zoltan,
What's your board's model number? Could you post the pci dump using
'lspci -xxx'? Thanks.
BRs
Peer Chen
-Original Message-
From: Robert Hancock [mailto:[EMAIL PROTECTED] Sent: Thursday, May
31, 2007 10:31 PM
To: Zoltan Boszormenyi
Cc: linux-kernel; Peer Chen; Kuan Luo
Subject: Re: MCP55 NCQ problem?
CCing Peer Chen and Kuan Luo from NVIDIA..
Looks like there were some unrecognized FIS errors from the
controller in there?
Zoltan Boszormenyi wrote:
Hi,
I just got this with 2.6.22-rc2 + cfs-v13 + swncq patch:
ata2.00: exception Emask 0x0 SAct 0x6 SErr 0x0 action 0x2 frozen
ata2.00: cmd 61/18:08:0f:b7:68/00:00:16:00:00/40 tag 1 cdb 0x0 data
12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: cmd 61/18:10:7f:b7:68/00:00:16:00:00/40 tag 2 cdb 0x0 data
12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
ata2.00: configured for UDMA/133
ata2: EH pending after completion, repeating EH (cnt=4)
ata2: EH complete
sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
At the time I was creating a DVD ISO image (reads and writes went to
the disk
that was resetted), browsing mail in thunderbird which also
exercised the same
disk and I was downloading another ISO with about 400-450 kB/sec to
another disk. Here are the disks in question:
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD160JJ WU10 PQ: 0
ANSI: 5
scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0
ANSI: 5
I got almost the same yesterday with 2.6.22-rc2-mm1:
May 29 12:44:20 localhost kernel: ata2.00: exception Emask 0x0 SAct
0x6 SErr 0x0 action 0x2 frozen
May 29 12:44:20 localhost kernel: ata2.00: cmd
61/10:08:2f:41:e9/00:00:07:00:00/40 tag 1 cdb 0x0 data 8192 out
May 29 12:44:20 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:44:20 localhost kernel: ata2.00: status: {DRDY }
May 29 12:44:20 localhost kernel: ata2.00: cmd
61/30:10:8f:42:e9/00:00:07:00:00/40 tag 2 cdb 0x0 data 24576 out
May 29 12:44:20 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:44:20 localhost kernel: ata2.00: status: {DRDY }
May 29 12:44:20 localhost kernel: ata2: hard resetting port
May 29 12:44:21 localhost kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 300)
May 29 12:44:21 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:44:21 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:44:21 localhost kernel: ata2.00: configured for UDMA/133
May 29 12:44:21 localhost kernel: ata2: EH pending after completion,
repeating EH (cnt=4)
May 29 12:44:21 localhost kernel: ata2: EH complete
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] 625142448
512-byte hardware sectors (320073 MB)
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] Write Protect is
off
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
..
May 29 12:47:46 localhost kernel: ata2.00: exception Emask 0x0 SAct
0x7 SErr 0x0 action 0x2 frozen
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/08:00:27:5a:eb/00:00:07:00:00/40 tag 0 cdb 0x0 data 4096 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/08:08:bf:61:9e/00:00:0f:00:00/40 tag 1 cdb 0x0 data 4096 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/20:10:97:5a:eb/00:00:07:00:00/40 tag 2 cdb 0x0 data 16384 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2: hard resetting port
May 29 12:47:46 localhost kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 300)
May 29 12:47:46 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:47:46 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:47:47 localhost kernel: ata2.00: configured for UDMA/133
May 29 12:47:47 localhost kernel: ata2: EH pending after completion,
repeating EH (cnt=4)
May 29 12
Re: MCP55 NCQ problem?
Zoltan Boszormenyi írta:
Hi,
Peer Chen írta:
Zoltan,
What's your board's model number? Could you post the pci dump using
'lspci -xxx'? Thanks.
BRs
Peer Chen
-Original Message-
From: Robert Hancock [mailto:[EMAIL PROTECTED] Sent: Thursday, May
31, 2007 10:31 PM
To: Zoltan Boszormenyi
Cc: linux-kernel; Peer Chen; Kuan Luo
Subject: Re: MCP55 NCQ problem?
CCing Peer Chen and Kuan Luo from NVIDIA..
Looks like there were some unrecognized FIS errors from the
controller in there?
Zoltan Boszormenyi wrote:
Hi,
I just got this with 2.6.22-rc2 + cfs-v13 + swncq patch:
ata2.00: exception Emask 0x0 SAct 0x6 SErr 0x0 action 0x2 frozen
ata2.00: cmd 61/18:08:0f:b7:68/00:00:16:00:00/40 tag 1 cdb 0x0 data
12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: cmd 61/18:10:7f:b7:68/00:00:16:00:00/40 tag 2 cdb 0x0 data
12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
ata2.00: configured for UDMA/133
ata2: EH pending after completion, repeating EH (cnt=4)
ata2: EH complete
sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
At the time I was creating a DVD ISO image (reads and writes went to
the disk
that was resetted), browsing mail in thunderbird which also
exercised the same
disk and I was downloading another ISO with about 400-450 kB/sec to
another disk. Here are the disks in question:
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD160JJ WU10 PQ: 0
ANSI: 5
scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0
ANSI: 5
I got almost the same yesterday with 2.6.22-rc2-mm1:
May 29 12:44:20 localhost kernel: ata2.00: exception Emask 0x0 SAct
0x6 SErr 0x0 action 0x2 frozen
May 29 12:44:20 localhost kernel: ata2.00: cmd
61/10:08:2f:41:e9/00:00:07:00:00/40 tag 1 cdb 0x0 data 8192 out
May 29 12:44:20 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:44:20 localhost kernel: ata2.00: status: {DRDY }
May 29 12:44:20 localhost kernel: ata2.00: cmd
61/30:10:8f:42:e9/00:00:07:00:00/40 tag 2 cdb 0x0 data 24576 out
May 29 12:44:20 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:44:20 localhost kernel: ata2.00: status: {DRDY }
May 29 12:44:20 localhost kernel: ata2: hard resetting port
May 29 12:44:21 localhost kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 300)
May 29 12:44:21 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:44:21 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:44:21 localhost kernel: ata2.00: configured for UDMA/133
May 29 12:44:21 localhost kernel: ata2: EH pending after completion,
repeating EH (cnt=4)
May 29 12:44:21 localhost kernel: ata2: EH complete
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] 625142448
512-byte hardware sectors (320073 MB)
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] Write Protect is
off
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
..
May 29 12:47:46 localhost kernel: ata2.00: exception Emask 0x0 SAct
0x7 SErr 0x0 action 0x2 frozen
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/08:00:27:5a:eb/00:00:07:00:00/40 tag 0 cdb 0x0 data 4096 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/08:08:bf:61:9e/00:00:0f:00:00/40 tag 1 cdb 0x0 data 4096 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/20:10:97:5a:eb/00:00:07:00:00/40 tag 2 cdb 0x0 data 16384 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2: hard resetting port
May 29 12:47:46 localhost kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 300)
May 29 12:47:46 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:47:46 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:47:47 localhost kernel: ata2.00: configured for UDMA/133
May 29 12:47:47 localhost kernel: ata2: EH pending after completion,
repeating EH (cnt=4)
May 29 12
Re: MCP55 NCQ problem?
Hi,
Peer Chen írta:
Zoltan,
What's your board's model number? Could you post the pci dump using 'lspci
-xxx'? Thanks.
BRs
Peer Chen
-Original Message-
From: Robert Hancock [mailto:[EMAIL PROTECTED]
Sent: Thursday, May 31, 2007 10:31 PM
To: Zoltan Boszormenyi
Cc: linux-kernel; Peer Chen; Kuan Luo
Subject: Re: MCP55 NCQ problem?
CCing Peer Chen and Kuan Luo from NVIDIA..
Looks like there were some unrecognized FIS errors from the controller
in there?
Zoltan Boszormenyi wrote:
Hi,
I just got this with 2.6.22-rc2 + cfs-v13 + swncq patch:
ata2.00: exception Emask 0x0 SAct 0x6 SErr 0x0 action 0x2 frozen
ata2.00: cmd 61/18:08:0f:b7:68/00:00:16:00:00/40 tag 1 cdb 0x0 data
12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: cmd 61/18:10:7f:b7:68/00:00:16:00:00/40 tag 2 cdb 0x0 data
12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
ata2.00: configured for UDMA/133
ata2: EH pending after completion, repeating EH (cnt=4)
ata2: EH complete
sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
At the time I was creating a DVD ISO image (reads and writes went to the
disk
that was resetted), browsing mail in thunderbird which also exercised
the same
disk and I was downloading another ISO with about 400-450 kB/sec to
another disk. Here are the disks in question:
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD160JJ WU10 PQ: 0
ANSI: 5
scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0
ANSI: 5
I got almost the same yesterday with 2.6.22-rc2-mm1:
May 29 12:44:20 localhost kernel: ata2.00: exception Emask 0x0 SAct 0x6
SErr 0x0 action 0x2 frozen
May 29 12:44:20 localhost kernel: ata2.00: cmd
61/10:08:2f:41:e9/00:00:07:00:00/40 tag 1 cdb 0x0 data 8192 out
May 29 12:44:20 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:44:20 localhost kernel: ata2.00: status: {DRDY }
May 29 12:44:20 localhost kernel: ata2.00: cmd
61/30:10:8f:42:e9/00:00:07:00:00/40 tag 2 cdb 0x0 data 24576 out
May 29 12:44:20 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:44:20 localhost kernel: ata2.00: status: {DRDY }
May 29 12:44:20 localhost kernel: ata2: hard resetting port
May 29 12:44:21 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 29 12:44:21 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:44:21 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:44:21 localhost kernel: ata2.00: configured for UDMA/133
May 29 12:44:21 localhost kernel: ata2: EH pending after completion,
repeating EH (cnt=4)
May 29 12:44:21 localhost kernel: ata2: EH complete
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] 625142448 512-byte
hardware sectors (320073 MB)
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] Write Protect is off
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
..
May 29 12:47:46 localhost kernel: ata2.00: exception Emask 0x0 SAct 0x7
SErr 0x0 action 0x2 frozen
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/08:00:27:5a:eb/00:00:07:00:00/40 tag 0 cdb 0x0 data 4096 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/08:08:bf:61:9e/00:00:0f:00:00/40 tag 1 cdb 0x0 data 4096 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/20:10:97:5a:eb/00:00:07:00:00/40 tag 2 cdb 0x0 data 16384 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2: hard resetting port
May 29 12:47:46 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 29 12:47:46 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:47:46 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:47:47 localhost kernel: ata2.00: configured for UDMA/133
May 29 12:47:47 localhost kernel: ata2: EH pending after completion,
repeating EH (cnt=4)
May 29 12:47:47 localhost kernel
RE: MCP55 NCQ problem?
Zoltan,
What's your board's model number? Could you post the pci dump using 'lspci
-xxx'? Thanks.
BRs
Peer Chen
-Original Message-
From: Robert Hancock [mailto:[EMAIL PROTECTED]
Sent: Thursday, May 31, 2007 10:31 PM
To: Zoltan Boszormenyi
Cc: linux-kernel; Peer Chen; Kuan Luo
Subject: Re: MCP55 NCQ problem?
CCing Peer Chen and Kuan Luo from NVIDIA..
Looks like there were some unrecognized FIS errors from the controller
in there?
Zoltan Boszormenyi wrote:
> Hi,
>
> I just got this with 2.6.22-rc2 + cfs-v13 + swncq patch:
>
> ata2.00: exception Emask 0x0 SAct 0x6 SErr 0x0 action 0x2 frozen
> ata2.00: cmd 61/18:08:0f:b7:68/00:00:16:00:00/40 tag 1 cdb 0x0 data
> 12288 out
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata2.00: cmd 61/18:10:7f:b7:68/00:00:16:00:00/40 tag 2 cdb 0x0 data
> 12288 out
> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata2: hard resetting port
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
> ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
> ata2.00: configured for UDMA/133
> ata2: EH pending after completion, repeating EH (cnt=4)
> ata2: EH complete
> sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
> sd 1:0:0:0: [sdb] Write Protect is off
> sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
>
> At the time I was creating a DVD ISO image (reads and writes went to the
> disk
> that was resetted), browsing mail in thunderbird which also exercised
> the same
> disk and I was downloading another ISO with about 400-450 kB/sec to
> another disk. Here are the disks in question:
>
> scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD160JJ WU10 PQ: 0
> ANSI: 5
> scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0
> ANSI: 5
>
> I got almost the same yesterday with 2.6.22-rc2-mm1:
>
> May 29 12:44:20 localhost kernel: ata2.00: exception Emask 0x0 SAct 0x6
> SErr 0x0 action 0x2 frozen
> May 29 12:44:20 localhost kernel: ata2.00: cmd
> 61/10:08:2f:41:e9/00:00:07:00:00/40 tag 1 cdb 0x0 data 8192 out
> May 29 12:44:20 localhost kernel: res
> 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> May 29 12:44:20 localhost kernel: ata2.00: status: {DRDY }
> May 29 12:44:20 localhost kernel: ata2.00: cmd
> 61/30:10:8f:42:e9/00:00:07:00:00/40 tag 2 cdb 0x0 data 24576 out
> May 29 12:44:20 localhost kernel: res
> 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> May 29 12:44:20 localhost kernel: ata2.00: status: {DRDY }
> May 29 12:44:20 localhost kernel: ata2: hard resetting port
> May 29 12:44:21 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus
> 113 SControl 300)
> May 29 12:44:21 localhost kernel: ata2.00: ata_hpa_resize: sectors =
> 625142448, hpa_sectors = 625142448
> May 29 12:44:21 localhost kernel: ata2.00: ata_hpa_resize: sectors =
> 625142448, hpa_sectors = 625142448
> May 29 12:44:21 localhost kernel: ata2.00: configured for UDMA/133
> May 29 12:44:21 localhost kernel: ata2: EH pending after completion,
> repeating EH (cnt=4)
> May 29 12:44:21 localhost kernel: ata2: EH complete
> May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] 625142448 512-byte
> hardware sectors (320073 MB)
> May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] Write Protect is off
> May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] Write cache:
> enabled, read cache: enabled, doesn't support DPO or FUA
> ..
> May 29 12:47:46 localhost kernel: ata2.00: exception Emask 0x0 SAct 0x7
> SErr 0x0 action 0x2 frozen
> May 29 12:47:46 localhost kernel: ata2.00: cmd
> 61/08:00:27:5a:eb/00:00:07:00:00/40 tag 0 cdb 0x0 data 4096 out
> May 29 12:47:46 localhost kernel: res
> 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
> May 29 12:47:46 localhost kernel: ata2.00: cmd
> 61/08:08:bf:61:9e/00:00:0f:00:00/40 tag 1 cdb 0x0 data 4096 out
> May 29 12:47:46 localhost kernel: res
> 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
> May 29 12:47:46 localhost kernel: ata2.00: cmd
> 61/20:10:97:5a:eb/00:00:07:00:00/40 tag 2 cdb 0x0 data 16384 out
> May 29 12:47:46 localhost kernel: res
> 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
> May 29 12:47:46 localhost kernel: ata2: hard resetting port
> May 29 12:47:46 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus
> 113 SControl 300)
> May 29
Re: MCP55 NCQ problem?
CCing Peer Chen and Kuan Luo from NVIDIA..
Looks like there were some unrecognized FIS errors from the controller
in there?
Zoltan Boszormenyi wrote:
Hi,
I just got this with 2.6.22-rc2 + cfs-v13 + swncq patch:
ata2.00: exception Emask 0x0 SAct 0x6 SErr 0x0 action 0x2 frozen
ata2.00: cmd 61/18:08:0f:b7:68/00:00:16:00:00/40 tag 1 cdb 0x0 data
12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: cmd 61/18:10:7f:b7:68/00:00:16:00:00/40 tag 2 cdb 0x0 data
12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
ata2.00: configured for UDMA/133
ata2: EH pending after completion, repeating EH (cnt=4)
ata2: EH complete
sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
At the time I was creating a DVD ISO image (reads and writes went to the
disk
that was resetted), browsing mail in thunderbird which also exercised
the same
disk and I was downloading another ISO with about 400-450 kB/sec to
another disk. Here are the disks in question:
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD160JJ WU10 PQ: 0
ANSI: 5
scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0
ANSI: 5
I got almost the same yesterday with 2.6.22-rc2-mm1:
May 29 12:44:20 localhost kernel: ata2.00: exception Emask 0x0 SAct 0x6
SErr 0x0 action 0x2 frozen
May 29 12:44:20 localhost kernel: ata2.00: cmd
61/10:08:2f:41:e9/00:00:07:00:00/40 tag 1 cdb 0x0 data 8192 out
May 29 12:44:20 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:44:20 localhost kernel: ata2.00: status: {DRDY }
May 29 12:44:20 localhost kernel: ata2.00: cmd
61/30:10:8f:42:e9/00:00:07:00:00/40 tag 2 cdb 0x0 data 24576 out
May 29 12:44:20 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:44:20 localhost kernel: ata2.00: status: {DRDY }
May 29 12:44:20 localhost kernel: ata2: hard resetting port
May 29 12:44:21 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 29 12:44:21 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:44:21 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:44:21 localhost kernel: ata2.00: configured for UDMA/133
May 29 12:44:21 localhost kernel: ata2: EH pending after completion,
repeating EH (cnt=4)
May 29 12:44:21 localhost kernel: ata2: EH complete
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] 625142448 512-byte
hardware sectors (320073 MB)
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] Write Protect is off
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
..
May 29 12:47:46 localhost kernel: ata2.00: exception Emask 0x0 SAct 0x7
SErr 0x0 action 0x2 frozen
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/08:00:27:5a:eb/00:00:07:00:00/40 tag 0 cdb 0x0 data 4096 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/08:08:bf:61:9e/00:00:0f:00:00/40 tag 1 cdb 0x0 data 4096 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/20:10:97:5a:eb/00:00:07:00:00/40 tag 2 cdb 0x0 data 16384 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2: hard resetting port
May 29 12:47:46 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 29 12:47:46 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:47:46 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:47:47 localhost kernel: ata2.00: configured for UDMA/133
May 29 12:47:47 localhost kernel: ata2: EH pending after completion,
repeating EH (cnt=4)
May 29 12:47:47 localhost kernel: ata2: EH complete
May 29 12:47:47 localhost kernel: sd 1:0:0:0: [sdb] 625142448 512-byte
hardware sectors (320073 MB)
May 29 12:47:47 localhost kernel: sd 1:0:0:0: [sdb] Write Protect is off
May 29 12:47:47 localhost kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
May 29 12:49:23 localhost kernel:
Re: MCP55 NCQ problem?
CCing Peer Chen and Kuan Luo from NVIDIA..
Looks like there were some unrecognized FIS errors from the controller
in there?
Zoltan Boszormenyi wrote:
Hi,
I just got this with 2.6.22-rc2 + cfs-v13 + swncq patch:
ata2.00: exception Emask 0x0 SAct 0x6 SErr 0x0 action 0x2 frozen
ata2.00: cmd 61/18:08:0f:b7:68/00:00:16:00:00/40 tag 1 cdb 0x0 data
12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: cmd 61/18:10:7f:b7:68/00:00:16:00:00/40 tag 2 cdb 0x0 data
12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
ata2.00: configured for UDMA/133
ata2: EH pending after completion, repeating EH (cnt=4)
ata2: EH complete
sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
At the time I was creating a DVD ISO image (reads and writes went to the
disk
that was resetted), browsing mail in thunderbird which also exercised
the same
disk and I was downloading another ISO with about 400-450 kB/sec to
another disk. Here are the disks in question:
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD160JJ WU10 PQ: 0
ANSI: 5
scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0
ANSI: 5
I got almost the same yesterday with 2.6.22-rc2-mm1:
May 29 12:44:20 localhost kernel: ata2.00: exception Emask 0x0 SAct 0x6
SErr 0x0 action 0x2 frozen
May 29 12:44:20 localhost kernel: ata2.00: cmd
61/10:08:2f:41:e9/00:00:07:00:00/40 tag 1 cdb 0x0 data 8192 out
May 29 12:44:20 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:44:20 localhost kernel: ata2.00: status: {DRDY }
May 29 12:44:20 localhost kernel: ata2.00: cmd
61/30:10:8f:42:e9/00:00:07:00:00/40 tag 2 cdb 0x0 data 24576 out
May 29 12:44:20 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:44:20 localhost kernel: ata2.00: status: {DRDY }
May 29 12:44:20 localhost kernel: ata2: hard resetting port
May 29 12:44:21 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 29 12:44:21 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:44:21 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:44:21 localhost kernel: ata2.00: configured for UDMA/133
May 29 12:44:21 localhost kernel: ata2: EH pending after completion,
repeating EH (cnt=4)
May 29 12:44:21 localhost kernel: ata2: EH complete
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] 625142448 512-byte
hardware sectors (320073 MB)
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] Write Protect is off
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
..
May 29 12:47:46 localhost kernel: ata2.00: exception Emask 0x0 SAct 0x7
SErr 0x0 action 0x2 frozen
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/08:00:27:5a:eb/00:00:07:00:00/40 tag 0 cdb 0x0 data 4096 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/08:08:bf:61:9e/00:00:0f:00:00/40 tag 1 cdb 0x0 data 4096 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/20:10:97:5a:eb/00:00:07:00:00/40 tag 2 cdb 0x0 data 16384 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2: hard resetting port
May 29 12:47:46 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 29 12:47:46 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:47:46 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:47:47 localhost kernel: ata2.00: configured for UDMA/133
May 29 12:47:47 localhost kernel: ata2: EH pending after completion,
repeating EH (cnt=4)
May 29 12:47:47 localhost kernel: ata2: EH complete
May 29 12:47:47 localhost kernel: sd 1:0:0:0: [sdb] 625142448 512-byte
hardware sectors (320073 MB)
May 29 12:47:47 localhost kernel: sd 1:0:0:0: [sdb] Write Protect is off
May 29 12:47:47 localhost kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
May 29 12:49:23 localhost kernel:
RE: MCP55 NCQ problem?
Zoltan,
What's your board's model number? Could you post the pci dump using 'lspci
-xxx'? Thanks.
BRs
Peer Chen
-Original Message-
From: Robert Hancock [mailto:[EMAIL PROTECTED]
Sent: Thursday, May 31, 2007 10:31 PM
To: Zoltan Boszormenyi
Cc: linux-kernel; Peer Chen; Kuan Luo
Subject: Re: MCP55 NCQ problem?
CCing Peer Chen and Kuan Luo from NVIDIA..
Looks like there were some unrecognized FIS errors from the controller
in there?
Zoltan Boszormenyi wrote:
Hi,
I just got this with 2.6.22-rc2 + cfs-v13 + swncq patch:
ata2.00: exception Emask 0x0 SAct 0x6 SErr 0x0 action 0x2 frozen
ata2.00: cmd 61/18:08:0f:b7:68/00:00:16:00:00/40 tag 1 cdb 0x0 data
12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: cmd 61/18:10:7f:b7:68/00:00:16:00:00/40 tag 2 cdb 0x0 data
12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
ata2.00: configured for UDMA/133
ata2: EH pending after completion, repeating EH (cnt=4)
ata2: EH complete
sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
At the time I was creating a DVD ISO image (reads and writes went to the
disk
that was resetted), browsing mail in thunderbird which also exercised
the same
disk and I was downloading another ISO with about 400-450 kB/sec to
another disk. Here are the disks in question:
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD160JJ WU10 PQ: 0
ANSI: 5
scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0
ANSI: 5
I got almost the same yesterday with 2.6.22-rc2-mm1:
May 29 12:44:20 localhost kernel: ata2.00: exception Emask 0x0 SAct 0x6
SErr 0x0 action 0x2 frozen
May 29 12:44:20 localhost kernel: ata2.00: cmd
61/10:08:2f:41:e9/00:00:07:00:00/40 tag 1 cdb 0x0 data 8192 out
May 29 12:44:20 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:44:20 localhost kernel: ata2.00: status: {DRDY }
May 29 12:44:20 localhost kernel: ata2.00: cmd
61/30:10:8f:42:e9/00:00:07:00:00/40 tag 2 cdb 0x0 data 24576 out
May 29 12:44:20 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:44:20 localhost kernel: ata2.00: status: {DRDY }
May 29 12:44:20 localhost kernel: ata2: hard resetting port
May 29 12:44:21 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 29 12:44:21 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:44:21 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:44:21 localhost kernel: ata2.00: configured for UDMA/133
May 29 12:44:21 localhost kernel: ata2: EH pending after completion,
repeating EH (cnt=4)
May 29 12:44:21 localhost kernel: ata2: EH complete
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] 625142448 512-byte
hardware sectors (320073 MB)
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] Write Protect is off
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
..
May 29 12:47:46 localhost kernel: ata2.00: exception Emask 0x0 SAct 0x7
SErr 0x0 action 0x2 frozen
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/08:00:27:5a:eb/00:00:07:00:00/40 tag 0 cdb 0x0 data 4096 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/08:08:bf:61:9e/00:00:0f:00:00/40 tag 1 cdb 0x0 data 4096 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/20:10:97:5a:eb/00:00:07:00:00/40 tag 2 cdb 0x0 data 16384 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2: hard resetting port
May 29 12:47:46 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 29 12:47:46 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:47:46 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:47:47 localhost kernel: ata2.00: configured for UDMA/133
May 29 12:47:47 localhost kernel: ata2: EH pending after completion
Re: MCP55 NCQ problem?
Hi,
Peer Chen írta:
Zoltan,
What's your board's model number? Could you post the pci dump using 'lspci
-xxx'? Thanks.
BRs
Peer Chen
-Original Message-
From: Robert Hancock [mailto:[EMAIL PROTECTED]
Sent: Thursday, May 31, 2007 10:31 PM
To: Zoltan Boszormenyi
Cc: linux-kernel; Peer Chen; Kuan Luo
Subject: Re: MCP55 NCQ problem?
CCing Peer Chen and Kuan Luo from NVIDIA..
Looks like there were some unrecognized FIS errors from the controller
in there?
Zoltan Boszormenyi wrote:
Hi,
I just got this with 2.6.22-rc2 + cfs-v13 + swncq patch:
ata2.00: exception Emask 0x0 SAct 0x6 SErr 0x0 action 0x2 frozen
ata2.00: cmd 61/18:08:0f:b7:68/00:00:16:00:00/40 tag 1 cdb 0x0 data
12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: cmd 61/18:10:7f:b7:68/00:00:16:00:00/40 tag 2 cdb 0x0 data
12288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: hard resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
ata2.00: configured for UDMA/133
ata2: EH pending after completion, repeating EH (cnt=4)
ata2: EH complete
sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
At the time I was creating a DVD ISO image (reads and writes went to the
disk
that was resetted), browsing mail in thunderbird which also exercised
the same
disk and I was downloading another ISO with about 400-450 kB/sec to
another disk. Here are the disks in question:
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD160JJ WU10 PQ: 0
ANSI: 5
scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0
ANSI: 5
I got almost the same yesterday with 2.6.22-rc2-mm1:
May 29 12:44:20 localhost kernel: ata2.00: exception Emask 0x0 SAct 0x6
SErr 0x0 action 0x2 frozen
May 29 12:44:20 localhost kernel: ata2.00: cmd
61/10:08:2f:41:e9/00:00:07:00:00/40 tag 1 cdb 0x0 data 8192 out
May 29 12:44:20 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:44:20 localhost kernel: ata2.00: status: {DRDY }
May 29 12:44:20 localhost kernel: ata2.00: cmd
61/30:10:8f:42:e9/00:00:07:00:00/40 tag 2 cdb 0x0 data 24576 out
May 29 12:44:20 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:44:20 localhost kernel: ata2.00: status: {DRDY }
May 29 12:44:20 localhost kernel: ata2: hard resetting port
May 29 12:44:21 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 29 12:44:21 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:44:21 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:44:21 localhost kernel: ata2.00: configured for UDMA/133
May 29 12:44:21 localhost kernel: ata2: EH pending after completion,
repeating EH (cnt=4)
May 29 12:44:21 localhost kernel: ata2: EH complete
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] 625142448 512-byte
hardware sectors (320073 MB)
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] Write Protect is off
May 29 12:44:21 localhost kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
..
May 29 12:47:46 localhost kernel: ata2.00: exception Emask 0x0 SAct 0x7
SErr 0x0 action 0x2 frozen
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/08:00:27:5a:eb/00:00:07:00:00/40 tag 0 cdb 0x0 data 4096 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/08:08:bf:61:9e/00:00:0f:00:00/40 tag 1 cdb 0x0 data 4096 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2.00: cmd
61/20:10:97:5a:eb/00:00:07:00:00/40 tag 2 cdb 0x0 data 16384 out
May 29 12:47:46 localhost kernel: res
40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 12:47:46 localhost kernel: ata2.00: status: {DRDY }
May 29 12:47:46 localhost kernel: ata2: hard resetting port
May 29 12:47:46 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
May 29 12:47:46 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:47:46 localhost kernel: ata2.00: ata_hpa_resize: sectors =
625142448, hpa_sectors = 625142448
May 29 12:47:47 localhost kernel: ata2.00: configured for UDMA/133
May 29 12:47:47 localhost kernel: ata2: EH pending after completion,
repeating EH (cnt=4)
May 29 12:47:47 localhost kernel
