I can quickly and easily duplicate it on my notebook by playing music or
mpegs in xmms. It may take a few minutes but it's guaranteed.
xmms stalls flat on it's face and anything accessing /proc stalls. If I get
the time to do it, I'll take a gander at it with kdb.
I have no patches applied to
"David S. Miller" wrote:
Chris Wedgwood writes:
On Thu, Jan 25, 2001 at 10:34:47AM -0800, David S. Miller wrote:
That's it, in 4 weeks time I am putting a kernel onto
vger.kernel.org that speaks ECN. This is my official and only
warning.
Why wait 4 weeks at
Every single connection to ECN-broken sites would work as normal - it
would just take an extra few seconds. Instead of "Hotmail doesn't
work!" it becomes "Hrm... Hotmail is fscking slow, but Yahoo is fine. I'll
use Yahoo". A few million of those, and suddenly Hotmail isn't so hot...
I think
Stefani Seibold wrote:
Hi Linus,
Hi Alan,
Hi everybody,
this kernel patch allows to disable all printk messages, by overloading the
printk function with a dummy printk macro.
This patch is usefull for embedded systems, where the hardware never changes
and normaly no textconsole is
Hotmails failing machines, for example, send RST packets back when
they see ECN. Ignoring valid TCP RST frames is unacceptable and
Linux will not do that as long as I am maintaining it.
Whadda word!
---
Woah... I did a "cat /boot/vmlinuz /dev/audio" - and I think I heard
god...
-
To
Don't they understand that Linux is actually a system that is growing to
be very popular?
That's why they ignore and don't support it.
Thunder
---
Woah... I did a "cat /boot/vmlinuz /dev/audio" - and I think I heard
god...
-
To unsubscribe from this list: send the line "unsubscribe
I've been getting this during the boot sequence for quite some time now.
They don't seem to impact the functionality of the drive any though. Just
another extra-verbose kernel message I should ignore? :)
(This is from the 2.4.1-pre10 btw.)
hdd: CD-ROM TW 120D, ATAPI CD/DVD-ROM drive
hdd:
PCI: No IRQ known for interrupt pin A of device 01:00.0. Please try
using pci=biosirq.
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF
(prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 0008
Flags: bus master, stepping, 66Mhz, medium devsel,
On Sat, 27 Jan 2001, Jacob Luna Lundberg wrote:
I've been getting this during the boot sequence for quite some time now.
They don't seem to impact the functionality of the drive any though. Just
another extra-verbose kernel message I should ignore? :)
(This is from the 2.4.1-pre10
Jens Axboe wrote:
On Sat, Jan 27 2001, Matti Lngvall wrote:
Best developers,
I was told to send you these lines by Mr. Marcelo Tosatti, they appear
even though there is no CD in any drive.
System:P3 733, VIA chips, 2 HD IDE drives, DVD and CD-R
Jan 26 23:44:16 h-10-26-17-2
Yes, I have ReiserFS as well...hrm...
David Ford wrote:
I can quickly and easily duplicate it on my notebook by playing music or
mpegs in xmms. It may take a few minutes but it's guaranteed.
xmms stalls flat on it's face and anything accessing /proc stalls. If I get
the time to do it,
This is what the device names are:
hda: FUJITSU MPE3064AT, ATA DISK drive
hdb: WDC AC32500H, ATA DISK drive
here's what they are with hdparm:
dev/hda:
Model=UFIJST UPM3E60A4 T , FwRev=DE0--380,
SerialNo=50256499
/dev/hdb:
Model=DW CCA2305H0
On Sat, 27 Jan 2001, Shawn Starr wrote:
This is what the device names are:
hda: FUJITSU MPE3064AT, ATA DISK drive
hdb: WDC AC32500H, ATA DISK drive
here's what they are with hdparm:
Model=UFIJST UPM3E60A4 T , FwRev=DE0--380,
Model=DW CCA2305H0
Oh, I never noticed that though. Yes, -i does display it correctly.
[EMAIL PROTECTED] wrote:
On Sat, 27 Jan 2001, Shawn Starr wrote:
This is what the device names are:
hda: FUJITSU MPE3064AT, ATA DISK drive
hdb: WDC AC32500H, ATA DISK drive
here's what they are with hdparm:
On Fri, Jan 26, 2001 at 04:59:13PM -0500, Michael H. Warfield wrote:
No... Microsoft learned, just two days ago, something that has
been part of best practices for over 15 years. Do NOT put all of your
DNS servers on the same network! The technical error may have triggered
the
-I is what is read directly off the drive, -i interprets it. IIRC, it's been
this way for a while..or it's just that I've used 2.4 for a while :) In any
case, it's byte swap issue. WD becomes "WDC AC" would become "DW CCA" , i.e.
"WD", "C ", and "AC" etc.
-d
Shawn Starr wrote:
This is
On Fri, Jan 26, 2001 at 05:47:14PM -0600, List User wrote:
I run a small ISP for my local community and have read some reports about
hotmail not supporting it et al. I don't want to be in a position where MY
site doesn't support this if it's the correct thing to do.
Is there anything
H. Peter Anvin wrote:
"David S. Miller" wrote:
H. Peter Anvin writes:
Last I communicated with them, I looked for a reference like that in the
standards RFCs so I could quote chapter and verse at the Hotmail people,
but I couldn't find it.
RFC793, where is lists the unused
On Sat, 27 Jan 2001 19:19:01 +1100, Andrew Morton [EMAIL PROTECTED] wrote:
The figures I quoted for the no-hw-checksum case were still
using scatter/gather. That can be turned off as well and
it makes it a tiny bit quicker.
Hmm. Are you sure the differences are not just noise? Unless you
noflame=1
I'm looking for some authoritative comparisons and discussions of the
current network stacks in *BSD and Linux. I.e. NET4 in Linux and
whatever is most current in *BSD.
_PLEASE_ no flaming, no causing flamewar, nadda.
I am writing an article for Linux.com and I am attempting to
On Sat, 27 Jan 2001 08:01:14 +, David Ford [EMAIL PROTECTED] wrote:
Does Linus or anyone object to raising the ksmg buffer from 16K to 32K?
4/5 systems I have now overflow the buffer during boot before init is
even launched.
Hmm, are you sure? man dmesg:
[...]
-sbufsize
Ion Badulescu wrote:
On Sat, 27 Jan 2001 19:19:01 +1100, Andrew Morton [EMAIL PROTECTED] wrote:
The figures I quoted for the no-hw-checksum case were still
using scatter/gather. That can be turned off as well and
it makes it a tiny bit quicker.
Hmm. Are you sure the differences are
Hi!
So...I'm bummed. I'm assuming a 30% degradation in an app is probably
not expected behavior? Swap usage is '0' in both OS's (i.e. it's not
a run out of memory issue).
Vmware is _not_ application, it is dirty kernel hack. Do it without
vmware.
Hi!
Is read access safe ?
Of course read-only is safe. As long as you mount the partition READ-ONLY
nothing can happen to it in any way, your NTFS data is at least safe.
Isn't it still theoretcially possible for the driver to send commands to the
disk controller that cause data to
Hi!
I'm too using this, mostly because I like it, got up with it, and it's better than
those pixelled displays today. And who needs colours?
For me, it says (2.4.0-prerelease) I'd got a HGC with 8 kB of RAM.
This surely isn't true because under DOS some pgmz work problemless
which use the
Hi!
I hear on the grapevine that 2.4 kernel modules should use spinlocks
in preference to cli() and sti(). Well I'm not sure how big a win it
is, particularly on a UP machine, but here's a patch for the
SoundBlaster. I've added a spinlock_t to the "struct b_devc" so that
multiple
You are right... this patch make no sense on a computer system with human
interactions. But think on tiny hidden computers, like in a dishwasher or a
traffic light. This computer are standalone, if it crash, then it will be
rebooted.
Nobody will attach a terminal to this kind of computer,
Hello,
Here is a patch with important eepro100 fixes for 2.4 kernel:
- Big-endian fixes (double cpu-bus conversion).
- "card reports no resources" hardware timing bug workaround.
Thanks to Donald Becker.
It may also fix a problem with "wait_for_cmd_done timeout" symptom.
Best regards
Hi!
I think I must need to upgrade my assembler, but:
2.4.0/Documentation/Changes does not list an assembler version.
make[2]: Entering directory `/mnt/sdb2/src/linux-2.4.0/drivers/md'
gcc -D__KERNEL__ -I/mnt/sdb2/src/linux-2.4.0/include -Wall -Wstrict-proto
types -O2
Hi!
Copying between vfat - vfat partitions is so slow. It seems
that it's vfat/msdos kernel driver problem because I tried to copy
I reported this years ago, with a 700 kB file on a floppy and
a 4 MB file on a Zip disk. In both cases mcopy was several times
faster than the kernel code.
--- linux-2.4.0/drivers/sound/sb.h.orig Fri Jan 26 13:57:40 2001
+++ linux-2.4.0/drivers/sound/sb.h Fri Jan 26 13:58:42 2001
@@ -137,6 +137,8 @@
void (*midi_input_intr) (int dev, unsigned char data);
void *midi_irq_cookie; /* IRQ cookie for the midi */
On 2001-01-27 1:46:12 "Sergey Kubushin" [EMAIL PROTECTED] wrote:
Modules still don't load:
=== Cut ===
ide-mod.o: Can't handle sections of type 32131
ide-probe-mod.o: Can't handle sections of type 256950710
ide-disk.o: Can't handle sections of type 688840897
ext2.o: Can't handle sections of
On Sat, Jan 27 2001, Matti Lngvall wrote:
Jan 26 23:44:57 h-10-26-17-2 kernel: VFS: busy inodes on changed media.
Jan 26 23:45:29 h-10-26-17-2 last message repeated 32 times
Jan 26 23:46:31 h-10-26-17-2 last message repeated 62 times
Jan 26 23:47:32 h-10-26-17-2 last message repeated
--- Blind-Carbon-Copy
X-Mailer: exmh version 2.1.1 10/15/1999
From: Keith Owens [EMAIL PROTECTED]
To: Peter Kaczuba [EMAIL PROTECTED]
cc: "Sergey Kubushin" [EMAIL PROTECTED]
Subject: Re: Linux 2.4.0ac12
In-reply-to: Your message of "Sat, 27 Jan 2001 12:06:57 BST."
[EMAIL
I have not compiled or used reiserfs here yet.
compiling Mikes semaphore debug patch now and adding sysrq
- but this took three days to happen just once here.
..john
Shawn Starr wrote:
Yes, I have ReiserFS as well...hrm...
-
To unsubscribe from this list: send the line "unsubscribe
Ion Badulescu wrote:
On Sat, 27 Jan 2001 08:01:14 +, David Ford [EMAIL PROTECTED] wrote:
Does Linus or anyone object to raising the ksmg buffer from 16K to 32K?
4/5 systems I have now overflow the buffer during boot before init is
even launched.
Hmm, are you sure? man dmesg:
[...]
On Sat, 27 Jan 2001, Andrew Morton wrote:
(Please keep netdev copied, else Jamal will grump at you, and
you don't want that).
Thanks, Andrew ;- Isnt netdev where networking stuff should be
discussed? I think i give up and will join lk, RSN ;-
The kernels which were tested were
On Sat, 27 Jan 2001, Ion Badulescu wrote:
750MHz PIII, Adaptec Starfire NIC, driver modified to use hardware sg+csum
(both Tx/Rx), and Intel i82559 (eepro100), no hardware csum support,
vanilla driver.
The box has 512MB of RAM, and I'm using a 100MB file, so it's entirely cached.
On Sat, Jan 27 2001, Andre Hedrick wrote:
I've been getting this during the boot sequence for quite some time now.
They don't seem to impact the functionality of the drive any though. Just
another extra-verbose kernel message I should ignore? :)
(This is from the 2.4.1-pre10 btw.)
jamal wrote:
..
It is also useful to have both client and server stats.
BTW, since the laptop (with the 3C card) is the client, the SG
shouldnt kick in at all.
The `client' here is doing the sendfiling, so yes, the
gathering occurs on the client.
...
The test tool is, of course,
Have you tried it with the modutiles 2.4.0 required by kernel 2.4.0?
Dale Christ wrote:
Snip
[7.1.] Software:
-- Versions installed: (if some fields are empty or look
-- unusual then possibly you have very old versions)
Linux localhost.localdomain 2.4.0i586 #9 Fri Jan 26 15:07:33 CST 2001
i586
On Sat, Jan 27 2001, Scott M. Hoffman wrote:
Have you tried it with the modutiles 2.4.0 required by kernel 2.4.0?
It's more serious than that, MO drives and 2.4.x are no quite getting
along yet in general...
--
* Jens Axboe [EMAIL PROTECTED]
* SuSE Labs
-
To unsubscribe from this list: send
On Sun, 28 Jan 2001, Andrew Morton wrote:
jamal wrote:
..
It is also useful to have both client and server stats.
BTW, since the laptop (with the 3C card) is the client, the SG
shouldnt kick in at all.
The `client' here is doing the sendfiling, so yes, the
gathering occurs on the
David Bustos wrote:
Quoth Jeff Garzik on Thu, Jan 25, 2001 at 10:24:13AM -0500:
What happens if you remove the call to pci_enable_device() in the source
code, drivers/sound/es1371.c?
That seems to do it.
Ok. For a temporary fix, there ya go.
But removing pci_enable_device is incorrect;
David Ford Wrote:
Since the testN series and up through ac12, I experience total loss of
control when memory is nearly exhausted.
I start with 256M and eat it up with programs until there is only about
7 megs left, no swap. From that point all user processes stall and the
disk begins to grind
Hi!
I have a similar problem when compiling recent 2.4.0-ac or 2.4.1-pre kernels:
gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2
-fomit-frame-pointer -fno-strict-aliasing -pipe -march=i686-c -o i387.o i387.c
{standard input}: Assembler messages:
{standard
David Ford wrote:
PCI: No IRQ known for interrupt pin A of device 01:00.0. Please try
using pci=biosirq.
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF
(prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 0008
Flags: bus master,
On Sat, Jan 27, 2001 at 04:10:48AM +, David Wagner wrote:
Practice being really, really paranoid. Think: You're designing a
firewall; you've got some reserved bits, currently unused; any future code
that uses them could behave in completely arbitrary and insecure ways,
for all you know.
Hello!
Why is it a bug to accept the ACK from it? RFC793 page 69 says
If the RCV.WND is zero, no segments will be acceptable, but
special allowance should be made to accept valid ACKs, URGs and
RSTs.
8) This obscure place is discussed for ages. The question is:
What is
Hello!
verify this? The only way I can think of is to verify that the checksum
field is zero initially, correct?
It is not zero. It contains checksum of pseudoheader.
fits the new Linux model a bit better, as it has one descriptor per
packet, not one per fragment (like the current
Hi
I just think you might look at aliasing on the linux box..
ifconfig eth0:0 ...
this might help you do the think,
regards,
patrick mourlhon
On Sat, 27 Jan 2001, Paul Jakma wrote:
i'm trying to get linux to do routing between 2 different subnets that
are on the same physical interface,
Has anyone decided to code a SFB (Stochastic Fair Blue) queue implementation
for Linux? It's been implemented for FreeBSD/ALTQ
(http://www.eecs.umich.edu/~wuchang/blue/). The paper for it shows it
performing very well in comparison to RED.
It might be useful in a Linux implementation to be able
did you install routed on the linux machine ?
On Sat, 27 Jan 2001, Paul Jakma wrote:
On Sat, 27 Jan 2001 [EMAIL PROTECTED] wrote:
Hi Paul,
I just think you might look for aliasing on your linux box.
i have the aliasing, the aliased machine can ping IP's on both
subnets. The
Hi Gregory!
You might have a look on linux/Documentation/networking/policy-routing.txt
I think this was down by Alexey Kuznetov
You might have a look to iproute + tc and HOWTO on advanced networking
patrick mourlhon
On Sat, 27 Jan 2001, Gregory Maxwell wrote:
Has anyone decided to code a
In article [EMAIL PROTECTED] you wrote:
Think of yourself as a firewall author now. You come across this, and
go, "these bits aren't used now; this means noone should be setting
them. I have no guarantee that anything in the future isn't going to use
these bits for something that isn't
Hi,
The kernel Janitor's TODO list is updated at
http://bazar.conectiva.com.br/~acme/TODO, lots of things to do to get rid
of old cruft, make sure that resources are properly used, etc, please take
a look and help! Please send additions and corrections to me and I'll try
to keep it
Just for the record, the system where I saw the problem
has only ext2 -
jjs
Shawn Starr wrote:
Yes, I have ReiserFS as well...hrm...
David Ford wrote:
I can quickly and easily duplicate it on my notebook by playing music or
mpegs in xmms. It may take a few minutes but it's guaranteed.
On Sat, Jan 27, 2001 at 07:18:09PM +0100, Frank v Waveren wrote:
On Sat, Jan 27, 2001 at 04:10:48AM +, David Wagner wrote:
Practice being really, really paranoid. Think: You're designing a
firewall; you've got some reserved bits, currently unused; any future code
that uses them could
On Sat, Jan 27, 2001 at 02:20:32PM -0500, Gregory Maxwell wrote:
Why? Why not just zero them, and get both security and compatibility...
Eeek! NO NO NO NO NO NO NO NO!
For ECN that would have worked, but that doesn't mean that something
couldn't have been implimented there that wouldn't
On Sat, Jan 27, 2001 at 07:52:32PM +0100, [EMAIL PROTECTED] wrote:
Hi Gregory!
You might have a look on linux/Documentation/networking/policy-routing.txt
I think this was down by Alexey Kuznetov
Thanks for the quick reply. But that's not exactly what I was looking for.
I was trying to find
I gave it a whirl. Sadly, no change.
On Sat, 27 Jan 2001, Jens Axboe wrote:
My gut tells me that this is the 'get last written' command, and even
with the quiet flag we get the IDE error status printed. Could you
try and add
goto use_toc;
add the top of
In article [EMAIL PROTECTED],
[EMAIL PROTECTED] wrote:
On Sat, 27 Jan 2001, Paul Jakma wrote:
On Sat, 27 Jan 2001 [EMAIL PROTECTED] wrote:
Hi Paul,
I just think you might look for aliasing on your linux box.
i have the aliasing, the aliased machine can ping IP's on both
subnets.
28866
---
$B-j#J#M#P$N!X#E%a!<%k#D#M!Y$r$*FO$1CW$7$^$9!#(B
---
--
http://www2.snowman.ne.jp/~nnet/
$B%N!<%9%M%C%H(B
$B!
Hello all,
I was wondering if someone might be able to help me.
I have just compiled my kernel and set it up on a floppy
to boot off a disk. I have it then use an image file to uncompress
and get the filesystem off ,etc. Well when it boots it says it has
uncompressed the filesystem image and
Gregory Maxwell wrote:
Why? Why not just zero them, and get both security and compatibility...
Eeek! NO NO NO NO NO NO NO NO!
For ECN that would have worked, but that doesn't mean that something
couldn't have been implimented there that wouldn't have worked that way..
I think that
On Sat, 27 Jan 2001, Jens Axboe wrote:
On Sat, Jan 27 2001, Andre Hedrick wrote:
I've been getting this during the boot sequence for quite some time now.
They don't seem to impact the functionality of the drive any though. Just
another extra-verbose kernel message I should ignore? :)
Hello!
Has anyone decided to code a SFB (Stochastic Fair Blue) queue implementation
for Linux?
I did not hear anything about this.
(http://www.eecs.umich.edu/~wuchang/blue/). The paper for it shows it
performing very well in comparison to RED.
Yes, the algorithm looks interesting.
Alexey
On Sat, Jan 27, 2001 at 08:58:51PM +0100, Jamie Lokier wrote:
[snip]
I think that older Checkpoint firewalls (perhaps current?) zeroed out SACK
on 'hide nat'ed connections. This causes unreasonable stalls for users on
SACK enabled clients. Not cool.
If both SACK and SACK_PERMITTED were
Wichert Akkerman writes:
Previously Goswin Brederlow wrote:
Maybe the kernel coud swap in the deleted libraries and keep it in
memory or real swap from then on instead of blocking the fs.
No, you have no idea how large the file might grow and you need to
keep that data somewhere.
Grow? It
Hi,
On Fri, Jan 26, 2001 at 06:05:54PM -0200, Rodrigo Barbosa (aka morcego) wrote:
I think JFS indeed doesn't have it. And ReiserFS doesn't too. This
should be common place for journaling filesystems.
No, it's nothing to do with journaling or not. Even journaling
filesystems can suffer IO
Rogier Wolff wrote:
H. Peter Anvin wrote:
Followup to: [EMAIL PROTECTED]
By author:"Ian S. Nelson" [EMAIL PROTECTED]
In newsgroup: linux.dev.kernel
I'm curious. Why does Linux make that friendly 98/9a/88 looking
postcode pattern when it's running? DOS and DOS95 don't do
I was looking up linux code to find why /proc/partitions report 'hdc' instead
of 'ide/host0/bus1/target0/lun0/cd'
example:
major minor #blocks name
8 01048575 scsi/host0/bus0/target6/lun0/disc
3 03140928 ide/host0/bus0/target0/lun0/disc
3 1 4000
H. Peter Anvin wrote:
Rogier Wolff wrote:
H. Peter Anvin wrote:
It output garbage to the 80h port in order to enforce I/O delays.
It's one of the safe ports to issue outs to.
Yes, because it is reserved for POST codes. You can get "POST
debugging cards" that simply have a BIN -
[EMAIL PROTECTED] writes:
On 01/26/01 01:19 PM James Lewis Nance [EMAIL PROTECTED] wrote:
FWIW IBM's JFS file system does not have a lost+found directory. I dont
remember if reiserfs does or not.
Actually it does.
From one of my rs/6000's sitting here, with a pretty much default AIX
On Sat, Jan 27, 2001 at 04:33:42AM -0500, Shawn Starr wrote:
Yes, I have ReiserFS as well...hrm...
I don't.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
Rogier Wolff wrote:
You seem to state that if you want POST codes, you should find a
different port, modify the code, test the hell out of it, and then
submit the patch.
That is NOT the right way to go about this: Port 0x80 is RESERVED for
POST usage, that's why it's always free. If
Hi Alexey,
On Sat, 27 Jan 2001 [EMAIL PROTECTED] wrote:
fits the new Linux model a bit better, as it has one descriptor per
packet, not one per fragment (like the current implementation).
Yes. Absence of such mode with acenic is big pain in ass.
And, at least for the starfire, using
Quoth Jeff Garzik on Sat, Jan 27, 2001 at 09:22:45AM -0500:
[...]
But removing pci_enable_device is incorrect; it merely avoids what
appears to be a bug with your Via irq routing. Would it be possible for
you to edit linux/arch/i386/kernel/pci-i386.h, and change the line near
the top from
A few things come to mind:
1. Is your init statically linked or linked with shared libraries? If
it's shared, do you have all the shared objects on your disk image in a
place where they can be found (/lib, I hope)? You might try linking it
statically (but stripped) just to make sure.
2. Is
On Sat, 27 Jan 2001 [EMAIL PROTECTED] wrote:
did you install routed on the linux machine ?
no i have my routes statically set, but that wouldn't make a
difference. Routed just adds/deletes entries from the kernel table as
neccessary and lets the kernel do the forwarding as neccessary. so
it'd
On Sat, 27 Jan 2001, Miquel van Smoorenburg wrote:
Did you enable forwarding with echo 1 /proc/sys/net/ipv4/ip_forward ?
yes. the machine already routes correctly between the 2 subnets and
the internet which is on a seperate interface. i also disabled
Firewalling should be implemented on the hosts, perhaps with centralized
policy management. In such a situation, there would be no reason to filter
on funny IP options.
That's madness. If you have to implement your firewalling on every host,
what do you do when someone wants to run a
Hi guys,
thanks for the feedback. This is now the second try of my disable printk
patch.
First i moved the option for disabling the prinbtk messages form the menu
character devices to kernel hacking.
Second, i had change the macro so it calls now a inline funciton
printk_inline which always
David Ford writes:
I'm looking for some authoritative comparisons and discussions of the
current network stacks in *BSD and Linux. I.e. NET4 in Linux and
whatever is most current in *BSD.
_PLEASE_ no flaming, no causing flamewar, nadda.
I am writing an article for Linux.com and I am
When the IP address of an interface changes, TCP connections with the
old source address are useless. Applications are not notified of this
and time out ordinarily, just as if nothing had happened. This is
behaviour isn't very helpful when you have a dynamic IP and know
you're probably not going
I can't get the CBQ running on 2.2.17. Alexey look like he doesn't reply to his
mails. I made one more man to check it over me. We both can't find a problem.
The file with config info is attached.
Eager for any idea
Clock
This is an excerpt from the kernel configuration:
[*] QoS
On Sat, 27 Jan 2001, David Schwartz wrote:
Firewalling should be implemented on the hosts, perhaps with centralized
policy management. In such a situation, there would be no reason to filter
on funny IP options.
That's madness. If you have to implement your firewalling on every
In article [EMAIL PROTECTED],
Paul Jakma [EMAIL PROTECTED] wrote:
On Sat, 27 Jan 2001, Miquel van Smoorenburg wrote:
Did you enable forwarding with echo 1 /proc/sys/net/ipv4/ip_forward ?
yes. the machine already routes correctly between the 2 subnets and
the internet which is on a seperate
I have Marcelo's patch. It isn't applicable because I am purposely not enabling any
swap. The problem is the system gets down to about 7 megs of buffers free and within
three seconds has become functionally dead. Zero response on any user input/output
device save the magic key.
The system
#!/bin/bash
/sbin/insmod cls_fw
/sbin/insmod sch_prio
/sbin/insmod sch_cbq
/sbin/insmod cls__u32
myne here is cls_u32
insmod: a module named sch_cbq already exists
insmod: cls__u32: no module by that name found
but i use 2.4... and i just feel your classifier
cannot work anymore...
At the time I had temporary access to my notebook and had a mismatched System.map
file :S
-d
Linus Torvalds wrote:
In article [EMAIL PROTECTED], David Ford [EMAIL PROTECTED] wrote:
I can quickly and easily duplicate it on my notebook by playing music or
mpegs in xmms. It may take a few
On Sat, Jan 27, 2001 at 02:18:31PM -0800, David Schwartz wrote:
Firewalling should be implemented on the hosts, perhaps with centralized
policy management. In such a situation, there would be no reason to filter
on funny IP options.
That's madness. If you have to implement your
On Sat, Jan 27, 2001 at 11:09:27PM +, James Sutherland wrote:
On Sat, 27 Jan 2001, David Schwartz wrote:
Firewalling should be implemented on the hosts, perhaps with centralized
policy management. In such a situation, there would be no reason to filter
on funny IP options.
Just proves i am not on lk
-- Forwarded message --
Date: Sat, 27 Jan 2001 19:05:38 -0500 (EST)
From: jamal [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: ECN: Clearing the air
On Fri, 26 Jan 2001 15:29:51 +, James Sutherland wrote:
Except you can't
Ryan Hello all,
Hi
Ryan I was wondering if someone might be able to help me. I have
Ryan just compiled my kernel and set it up on a floppy to boot off a
Ryan disk. I have it then use an image file to uncompress and get
Ryan the filesystem off ,etc. Well when it boots it says it has
Mark Smith wrote:
On Fri, Jan 26, 2001 at 11:02:05AM -0700, Thunder from the hill wrote:
my vaio F-series used to sleep correctly under RH6.1. it now hangs
forever making the sleep mode much less useful.
i just push the sleep button. it used to work under RH6.1. under RH7.0
A file-system without a lost+found directory is like love without sex.
You mean, possible but leaving you unsatisfied? Well, I think a file
system without a lost+found is a lot worse.
Thunder
---
Woah... I did a "cat /boot/vmlinuz /dev/audio" - and I think I heard
god...
-
To unsubscribe
On Sat, 27 Jan 2001, jamal wrote:
- ECN does not break things. It's brain damaged firewalls, Intrusion
detection systems, and load balancers that should be shot.
One intrusion detection "expert" was quoted suggesting the blocking of ECN
bits should be blocked because "nmap uses them" to
On Sat, 27 Jan 2001, David Ford wrote:
Since the testN series and up through ac12, I experience total loss of
control when memory is nearly exhausted.
I start with 256M and eat it up with programs until there is only about
7 megs left, no swap. From that point all user processes stall
This system is the following:
AcerOPEN AP53/AX Motherboard, Intel Pentium 200Mhz w/o MMX (1996-1997)
Chipsets: 430HX, PIIX3 (EIDE)
64MB RAM EDO 60ns (Kingston brand)
Linus Torvalds wrote:
In article [EMAIL PROTECTED], David Ford [EMAIL PROTECTED]
wrote:
We've narrowed it down to "we're
1 - 100 of 322 matches
Mail list logo
