Alle 12:42, sabato 12 marzo 2005, Andrew Morton ha scritto:
- A new version of the acpi poweroff fix. People who were having trouble
with ACPI poweroff, please test and report.
Hi Andrew,
This does not work for me. The only difference since previous versions is that
cursor stops blinking
How about this take on the problem?
When a potential periodic timer is deleted through timer_del_sync, all cpus
are scanned to determine if the timer is running on that cpu. In a NUMA
configuration doing so will cause NUMA interlink traffic which limits the
scalability of timers.
The following
Christoph Lameter wrote:
On Sun, 13 Mar 2005, Oleg Nesterov wrote:
I suspect that del_timer_sync() in its current form is racy.
...snip...
next timer interrupt, __run_timers() picks
this timer again, sets timer-base = NULL
^^^
On Sat, 12 Mar 2005 20:41:14 MST, Frank Sorenson said:
These patches look pretty good. A few comments (with a patch--tested on
my Inspiron 9200):
I tested your patch on top of Dmitry's on a Dell Latitude C840, seems to work.
- - Some of the Dell motherboards provide more than 1 temperature
Hi,
On Mon, 2005-03-14 at 16:00, Pavel Machek wrote:
Hi!
* MySQL (hinders the actual suspension process and kicks the pc
back to
where it was)
Try this patch...
Pavel
--- clean/kernel/signal.c 2005-02-03
On Mon, 14 Mar 2005, Alan Cox wrote:
On Llu, 2005-03-14 at 06:55, Paul wrote:
# cat driver
ide-cdrom version 4.61
# echo ide-scsi driver
# cat driver
This has always been unsafe. Its something I suggested was removed a
long time ago because the locking for it is unfixable.
Locking is fixed in
In the overall kernel (Linus's bk tree) I count:
733 lines matching 'for *( *; *; *)'
718 lines matching 'while *( *1 *)'
In the kernel/*.c files, I count 15 of the 'for(;;)' style and 1 of the
'while(1)' style.
Certainly the 'for(;;)' style is acceptable, and even slightly to
Hi Christian,
On Fri, 11 Mar 2005 16:09:24 +0100, Christian Kujau [EMAIL PROTECTED] wrote:
Mauricio Lin wrote:
Hi Christian,
I would like to know what are the kernel versions this problem happened.
Did this problem start from 2.6.11-rc2-bk10?
i noticed it first at 2.6.11, then again
Hi,
On Tue, 2005-03-15 at 14:03 +0800, Yu, Luming wrote:
Basically, this driver just call some specific AML method for hotkey function,
that can be
achieved through generic hotkey driver filed at
http://bugzilla.kernel.org/show_bug.cgi?id=3887.
So I don't think this driver is needed.
OK. I
Can you turn these two arrays into a bitmap please?
Ok.
This shouldn't be opencoded here. Instead make a utility function
like vmalloc_range() that takes a start and end address and
make the module allocation use it too.
Also you should fix up asm-x86_64/page.h and
Pavel Machek wrote:
Hi!
I agree. Still in all that follows, no one has addressed the apparent
race described above. The reason the system reported the errors that
started this thread is that the APM restore code was trying to read the
cmos clock (I assume to set the xtime clock) WHILE the
Current smbfs has a bug: you can't supply user, noauto flags for it
in /etc/fstab. smbmount tool expands this to noexec, nosuid, nodev,
user, noauto and smbfs rejects all arguments because it doesn't know
any of these keywords.
This patch fixes it. It introduces these arguments to the smbfs
On Mon, Mar 14, 2005 at 10:32:34PM -0800, Christoph Lameter wrote:
The definition of the irq_stat as an array means that the individual
elements of the irq_stat array are located on one NUMA node requiring
internode traffic to access irq_stat from other nodes. This patch makes
irq_stat a
Christoph Lameter wrote:
@@ -476,6 +454,7 @@ repeat:
}
}
spin_lock_irq(base-lock);
+ timer-running = 0;
^^
goto repeat;
On Mon, 14 Mar 2005 21:17:55 -0800
Andrew Morton [EMAIL PROTECTED] bubbled:
Martin Zwickel [EMAIL PROTECTED] wrote:
Hi,
just tried the 2.6.11-mm3 and at boot-time my start scripts try to
enable DMA on my disk (hdparm -m16 -c1 -u1 -X69 /dev/hda).
But while running hdparm, the
On Mon, Mar 14, 2005 at 11:41:37AM -0500, Andreas Dilger wrote:
What about the LBD patches - what limits are involved there, and have
they been rolled into a Linus kernel, or one or more vendor kernels?
These are part of stock 2.6 kernels. The caveat here is that there have
been some
* Christoph Lameter [EMAIL PROTECTED] wrote:
The following patch removes the magic in the timer_list structure
(Andrew suggested that we may not need it anymore) and replaces it
with two u8 variables that give us some additional state of the timer
The 'remove the magic' observation is not a
Hi,
today I got into some major trouble with the disk. nothing worked anymore and
I had to reboot with magic-sysrq. This was found in the log:
Mar 15 10:27:20 tachyon ATA: abnormal status 0xD0 on port 0xF0806087
Mar 15 10:27:20 tachyon ATA: abnormal status 0xD0 on port 0xF0806087
Mar 15 10:27:20
Hello, all
I look through code of exist CANbus drivers, and have, may be strange,
next question:
Anyone could told me, why everyone, who wrote CANbus driver (peak,
kvaser etc) always use char dev, but not netdev for it? May be exist
some global pitfall, which I couldn't see, which prevent to
* Andrew Morton [EMAIL PROTECTED] wrote:
Adrian Bunk [EMAIL PROTECTED] wrote:
My point is simply:
The help text for an option you need only under very specific
circumstances shouldn't sound as if this option was nearly was
mandatory.
I think the sort of sell-your-cycles
sir,
i will give a presentation on j.f.s. . i read that at the time of
asynchronous update the update of transactions are made maintaining an
ordering, but i read that it is not so simple if the updation is
synchronous. and i also don't know how the situation is handled.
i request to
we at a minimum need the patch below.
Ingo
Signed-off-by: Ingo Molnar [EMAIL PROTECTED]
--- linux/arch/i386/Kconfig.orig
+++ linux/arch/i386/Kconfig
@@ -909,7 +909,6 @@ config REGPARM
config SECCOMP
bool Enable seccomp to safely compute untrusted bytecode
depends on
Hi All,
Where we can find specs for writing driver for Intel PRO 100 card.
Regards
Shafahidee
-
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please
On Sun, 13 Mar 2005, Jon Smirl wrote:
All of the files in drivers/char/drm really should have an explicit
dual MIT/GPL license on them too. The DRM project has been taking
patches back into DRM from LKML without making it clear that DRM is
MIT licensed. It might be construed that doing this
Hi all,
Andrew Clayton reported lockups on the dri list issues since -bk2
and bug 4337 on bugzilla.kernel.org looks like it might be the same
thing..
This leads me to think the AGP multi-bridge patches are at fault... (for
once my laziness in merging late instead of early gave a good gap
Hi all
I noticed that in current linux kernel versions (2.6.11), some basic
functions are out of line (not inlined)
Example of a call to spin_unlock(somelock)
c01069fa: b8 e8 7b 35 c0 mov$0xc0357be8,%eax
c01069ff: e8 3c e4 1f 00 call c0304e40 _spin_unlock
c0304e40
Got a problem here with the last few Linus -bk releases.
2.6.11-bk2 is running fine.
2.6.11-bk3 - 2.6.11-bk6 has the following problem:
Everything is fine while the machine is booting. However as soon as X
starts up the screen goes blank as normal but stays blank, no gdm login
screen
Xen, UML, VM, VMware, separate computers
http://linux-vserver.org/ would also seem to be an excellent match.
-
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, 2005-03-15 at 10:50 +, Dave Airlie wrote:
Got a problem here with the last few Linus -bk releases.
2.6.11-bk2 is running fine.
2.6.11-bk3 - 2.6.11-bk6 has the following problem:
Everything is fine while the machine is booting. However as soon as X
starts up the
According to your patch, the C840 has 2 temp sensors. I'll have to figure
out what the second one is (prob either the GPU or the disk drive?)
If it runs over 40 C easily it's probably the GPU :)
--
Giuseppe Oblomov Bilotta
Can't you see
It all makes perfect sense
Expressed in dollar and
On Út 15-03-05 14:31:56, Benjamin Herrenschmidt wrote:
On Tue, 2005-03-15 at 14:24 +1100, Benjamin Herrenschmidt wrote:
Hi Pavel !
Please kill that swsusp_restore() call that itself calls
flush_tlb_global(), it's junk. First, the flush_tlb_global() thing is
arch specific, and that's
Anyone could told me, why everyone, who wrote CANbus driver (peak,
kvaser etc) always use char dev, but not netdev for it? May be exist
some global pitfall, which I couldn't see, which prevent to use netdev?
Maybe you try out:
http://www.linutronix.de/data/linux-2.6.11-can.diff
Bene
-
To
On Tue, 2005-03-15 at 10:32 +, Dave Airlie wrote:
On Sun, 13 Mar 2005, Jon Smirl wrote:
All of the files in drivers/char/drm really should have an explicit
dual MIT/GPL license on them too. The DRM project has been taking
patches back into DRM from LKML without making it clear that
* Ingo Molnar [EMAIL PROTECTED] wrote:
see my earlier counter-arguments in the thread starting at:
http://marc.theaimsgroup.com/?l=linux-kernelm=110630922022462w=2
end result of the thread: seccomp is completely unnecessary code-bloat
and can be equivalently implemented via ptrace. I
Hi.
On Tue, 2005-03-15 at 19:10, Li Shaohua wrote:
Hi,
On Mon, 2005-03-14 at 16:00, Pavel Machek wrote:
Hi!
* MySQL (hinders the actual suspension process and kicks the pc
back to
where it was)
Try this patch...
I've realized that my previous patch had too many problems with the way
the journaling system works. So I went back to my first approach but
added the journal_head lock as one global lock to keep the buffer head
size smaller. I only added the state lock to the buffer head. I've tested
this for
Hi,
On Tuesday, 15 of March 2005 12:03, Pavel Machek wrote:
On t 15-03-05 14:31:56, Benjamin Herrenschmidt wrote:
On Tue, 2005-03-15 at 14:24 +1100, Benjamin Herrenschmidt wrote:
Hi Pavel !
Please kill that swsusp_restore() call that itself calls
flush_tlb_global(), it's junk.
Hi Benedikt,
Yes, thanks, very close to what about I thinking :),
but are you measure overhead of netdev (it disturb me)?
Andrey
Benedikt Spranger wrote:
Anyone could told me, why everyone, who wrote CANbus driver (peak,
kvaser etc) always use char dev, but not netdev for it? May be exist
some
* Steven Rostedt [EMAIL PROTECTED] wrote:
I've realized that my previous patch had too many problems with the
way the journaling system works. So I went back to my first approach
but added the journal_head lock as one global lock to keep the buffer
head size smaller. I only added the state
Hi!
Please kill that swsusp_restore() call that itself calls
flush_tlb_global(), it's junk. First, the flush_tlb_global() thing is
arch specific, and that's all swsusp_restore() does. Then, the asm just
calls this before returning to C code, so it makes no sense to have a
hook
Hi!
* MySQL (hinders the actual suspension process and kicks the pc
back to
where it was)
Try this patch...
Pavel
--- clean/kernel/signal.c 2005-02-03 22:27:26.0 +0100
+++
I have a VIA Epia M1 board that crashes very badly (and pretty
often, especially when using DMA). I want to fix that.
Serial console + magic SysRQ didn't help so I am going the nmi
watchdog way. But in order to have nmi watchdog I need APIC, right?
The C3 processor seems to support IOAPIC.
As described in my patch that marked this obsolete driver as BROKEN,
this patch completely removes it.
Signed-off-by: Adrian Bunk [EMAIL PROTECTED]
---
Documentation/cdrom/mcd |4
Documentation/cdrom/mcdx | 17
drivers/cdrom/Kconfig| 56 -
drivers/cdrom/Makefile |1
This patch fixes the following compile error with CONFIG_BRIDGE=y and
CONFIG_ATM_LANE=m:
-- snip --
...
LD .tmp_vmlinux1
net/built-in.o(.init.text+0x3ad1): In function `br_init':
: undefined reference to `br_fdb_get_hook'
net/built-in.o(.init.text+0x3adb): In function `br_init':
:
2.6.11-mm1 and earlier: mouse appear as /dev/input/mouse0
2.6.11-mm3: mouse appear as /dev/input/mouse1
No big problem, one change to xorg.conf and I got the mouse back.
I guess it wasn't supposed to change like that though?
This is a mouse connected to the ps2 port, also appearing as /dev/psaux
On Mon, Mar 14, 2005 at 09:49:40PM -0800, David S. Miller wrote:
On Sun, 6 Mar 2005 21:57:54 +0100
Adrian Bunk [EMAIL PROTECTED] wrote:
The only user of fc_type_trans (drivers/net/fc/iph5526.c) is BROKEN in
2.6 and removed in -mm.
Signed-off-by: Adrian Bunk [EMAIL PROTECTED]
That
Hi there!
I got some atomic counter underflows in the nfs code:
Mar 14 17:19:15 phoebee rpc.statd[6890]: Received erroneous SM_UNMON request
from phoebee for 192.168.0.1
Mar 14 17:19:15 phoebee BUG: atomic counter underflow at:
Mar 14 17:19:15 phoebee
jerome lacoste writes:
I have a VIA Epia M1 board that crashes very badly (and pretty
often, especially when using DMA). I want to fix that.
Serial console + magic SysRQ didn't help so I am going the nmi
watchdog way. But in order to have nmi watchdog I need APIC, right?
The C3
On Tue, 15 Mar 2005 13:34:55 +0100, Mikael Pettersson [EMAIL PROTECTED] wrote:
jerome lacoste writes:
I have a VIA Epia M1 board that crashes very badly (and pretty
often, especially when using DMA). I want to fix that.
Serial console + magic SysRQ didn't help so I am going the
On Tue, 15 Mar 2005, Adrian Bunk wrote:
On Thu, Mar 10, 2005 at 12:42:23AM +0100, maximilian attems wrote:
From: Klaus Ita [EMAIL PROTECTED]
subject says all, patch still applies.
...
Fix is already in -mm for some time.
cu
Adrian
yup saw it lately. great.
thanks for your mail.
jerome lacoste writes:
So if I don't have APIC, that means I cannot use nmi_watchdog to
investigate the problem, right?
Correct.
Do I have any alternative to investigate this hang or should I just
give up and smash my board?
I can't help you with that one.
-
To unsubscribe from this
On Tue, Mar 15, 2005 at 12:27:12PM +0100, Ingo Molnar wrote:
this combination of arguments i think tips the balance in favor of
seccomp, but still, i hate the fact that the anti-ptrace sentiment was
used as a vehicle to get this feature into the kernel.
Why should I use excuses to get this
On Tue, 15 Mar 2005, Ingo Molnar wrote:
* Steven Rostedt [EMAIL PROTECTED] wrote:
I've realized that my previous patch had too many problems with the
way the journaling system works. So I went back to my first approach
but added the journal_head lock as one global lock to keep the
On Maw, 2005-03-15 at 08:19, Bartlomiej Zolnierkiewicz wrote:
On Mon, 14 Mar 2005, Alan Cox wrote:
Locking is fixed in ide-dev-2.6 tree
(at the moment seem to be dropped from -mm?).
Excellent - I'm looking forward to dropping the -ac IDE locking patches
-
To unsubscribe from this list: send
Here is a new version of the patch:
- minimal changes
- reintroduced DMI-probing
I had a look at the synaptic-sources to see how the pass-through-mode is
implemented. We'll see if something similar to this also works with the
lifebook.
I received a request from a user who has a
It breaks compilation on i386 either, because nr_copy_pages_check
is static in swsusp.c. May I propose the following patch instead (tested on
x86-64 and i386)?
Greets,
Rafael
Signed-off-by: Rafael J. Wysocki [EMAIL PROTECTED]
diff -Nrup linux-2.6.11-bk10-a/arch/i386/power/cpu.c
On Mon, Mar 14, 2005 at 02:34:42PM -0800, David S. Miller wrote:
On Mon, 14 Mar 2005 14:06:09 -0800
Luck, Tony [EMAIL PROTECTED] wrote:
Trying to boot a build of the latest BK on ia64 I see
a series of messages like this:
mm/memory.c:99: bad pgd e001feba4000.
mm/memory.c:99:
+asmlinkage int __swsusp_flush_tlb(void)
+{
+ swsusp_restore_check();
Someone will certainly forget this one, and it is probably
nicer/easier to just move BUG_ON into swsusp_suspend(), just after
restore_processor_state() or something like that...
Agreed.
Ben.
-
To unsubscribe
On Maw, 2005-03-15 at 04:32, Lee Revell wrote:
This seems sufficient for the simplest devices, that just have an
IRQ_PENDING and an IRQ_ACK register. But what about a device like the
emu10k1 where you have a half loop and loop interrupt for each of 64
channels, plus about 10 other interrupt
* Steven Rostedt [EMAIL PROTECTED] wrote:
good progress - but the global lock may be a scalability worry on
upstream though. Would it be possible to just mirror much of the current
lock logic, but with spinlocks instead of bitlocks? And there should be
no #ifdefs on PREEMPT_RT.
The
Hello,
I require a kernel module that will print
gateway IP addresses in routing table as well as it
should not print Gateways that appear to be the same
interface ip addresses of that linux machine.
e.g. If my eth1 is 172.16.x.x and if same
appear in routing table for any entry
On Mon, 14 Mar 2005, Randy.Dunlap wrote:
maximilian attems wrote:
Fix w6692 section references:
convert __initdata to __devinitdata.
Error: ./drivers/isdn/hisax/w6692.o .text refers to 002f R_386_32
.init.data
I think the correct fix is to make W6692Version() be __init ...
What
On Tue, 2005-03-15 at 08:16 +0100, Arjan van de Ven wrote:
(The intermodule_register and pm_register stuff has been hanging around for
so long that one wonders if we need sterner stimuli, not lesser).
intermodule can just about go (one user left).. we could start by making
the
On Maw, 2005-03-15 at 04:33, Andrew Morton wrote:
--- 25/include/linux/hayesesp.h~esp-build-fix 2005-03-14 20:31:18.0
-0800
+++ 25-akpm/include/linux/hayesesp.h 2005-03-14 20:31:30.0 -0800
@@ -77,6 +77,7 @@ struct hayes_esp_config {
struct esp_struct {
int
Hi all,
The latest release of ocf-linux (20050315) is available for download
from the project page:
http://ocf-linux.sourceforge.net/
This release includes the following changes:
* Hifn PLL bug fixes
* Makefile fixes for 2.6 builds
* 2.6.11 and 2.4.29 patches
This makes it possible for a root-task to pass capabilities to
nonroot-task across execve. The root-task needs to change it's
cap_inheritable mask and set prctl(PR_SET_KEEPCAPS, 1) to pass on
capabilities.
This overloads keepcaps, which could surprise to existing users.
On Tue, 15 Mar 2005, Alan Cox wrote:
On Maw, 2005-03-15 at 08:19, Bartlomiej Zolnierkiewicz wrote:
On Mon, 14 Mar 2005, Alan Cox wrote:
Locking is fixed in ide-dev-2.6 tree
(at the moment seem to be dropped from -mm?).
Excellent - I'm looking forward to dropping the -ac IDE locking patches
There
On Tue, 15 Mar 2005, Ingo Molnar wrote:
* Steven Rostedt [EMAIL PROTECTED] wrote:
What should we use instead of #ifdef PREEMPT_RT? Or should we just
keep it the same for both. Since this fix is only to fix spinlocks
that schedule, I figured that it would be better not to waste the
Fix two array-of-incomplete-type errors from gcc4 in isicom.c.
/Mikael
--- linux-2.6.11/drivers/char/isicom.c.~1~ 2005-03-02 19:24:15.0
+0100
+++ linux-2.6.11/drivers/char/isicom.c 2005-03-15 11:37:03.0 +0100
@@ -151,9 +151,6 @@ MODULE_DEVICE_TABLE(pci, isicom_pci_tbl)
Fix
drivers/net/arcnet/arcnet.c: In function 'release_arcbuf':
drivers/net/arcnet/arcnet.c:256: warning: operation on 'i' may be undefined
drivers/net/arcnet/arcnet.c: In function 'get_arcbuf':
drivers/net/arcnet/arcnet.c:292: warning: operation on 'i' may be undefined
warnings from gcc4 in
This patch is another take at fixing the race between mount and umount
resetting the blocksize and causing buffer errors, infinite loops in
__getblk_slow, and possibly other undiscovered effects.
It adds possible flags to bd_claim such that the caller can request
exclusive access and/or wait
shafa.hidee wrote:
Hi All,
Where we can find specs for writing driver for Intel PRO 100 card.
Regards
Shafahidee
already supported.
isn't it?
-
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to [EMAIL PROTECTED]
More majordomo info at
On Tue, 15 Mar 2005 13:25:12 +0100, Helge Hafting
[EMAIL PROTECTED] wrote:
2.6.11-mm1 and earlier: mouse appear as /dev/input/mouse0
2.6.11-mm3: mouse appear as /dev/input/mouse1
No big problem, one change to xorg.conf and I got the mouse back.
I guess it wasn't supposed to change like that
(snipped the CC list - hope that's ok)
On Mon, 14 Mar 2005, Albert Cahalan wrote:
On Tue, 2005-03-15 at 00:08 +0100, Bodo Eggert wrote:
On Mon, 14 Mar 2005, Albert Cahalan wrote:
On Mon, 2005-03-14 at 10:42 +0100, Rene Scharfe wrote:
Albert Cahalan wrote:
NACK, the admin (and with
On Mar 14, 2005, at 9:34 PM, Stephen Rothwell wrote:
Since you brought this file to my attention, I figured I might as well
do
some simple cleanups. This patch does:
- single bit int bitfields are a bit suspect and Anndrew pointed
out recently that they are probably slower to access than
On Tue, Mar 15, 2005 at 09:25:45AM -0500, Dmitry Torokhov wrote:
Vojtech activated scroll handling in keyboard code by default so now
your keyboard is mapped to the mouse0 and the mouse moved to mouse1.
Vojtech, is is possible to detect whether a keyboard has scroll
wheel(s) by its ID?
If
On Tue, Mar 15, 2005 at 10:38:30AM +, Dave Airlie wrote:
Hi all,
Andrew Clayton reported lockups on the dri list issues since -bk2
and bug 4337 on bugzilla.kernel.org looks like it might be the same
thing..
This leads me to think the AGP multi-bridge patches are at
This patch makes a needlessly global variable static.
Signed-off-by: Adrian Bunk [EMAIL PROTECTED]
--- linux-2.6.11-mm3-full/net/bluetooth/rfcomm/core.c.old 2005-03-15
13:21:50.0 +0100
+++ linux-2.6.11-mm3-full/net/bluetooth/rfcomm/core.c 2005-03-15
13:22:03.0 +0100
@@
On Tue, Mar 15, 2005 at 01:52:47PM +0100, jerome lacoste wrote:
Do I have any alternative to investigate this hang or should I just
give up and smash my board?
If you have the longhaul cpufreq driver enabled, turn it off.
It's currently broken for some reason, and I've not had time to
figure
* Andrea Arcangeli [EMAIL PROTECTED] wrote:
technical comment: seccomp goes outside the audit/selinux framework,
which i believe is a bug. Andrea?
I intentionally left it out of audit/selinux. To the less dependencies
it has on other parts of the kernel and the simpler it is, the better
Hi,
On Tuesday, 15 of March 2005 13:02, Pavel Machek wrote:
Hi!
Please kill that swsusp_restore() call that itself calls
flush_tlb_global(), it's junk. First, the flush_tlb_global() thing is
arch specific, and that's all swsusp_restore() does. Then, the asm
just
calls
The following four patches provide the last needed changes before the
introduction of sparsemem. For a more complete description of what this
will do, please see this patch:
http://www.sr71.net/patches/2.6.11/2.6.11-bk7-mhp1/broken-out/B-sparse-150-sparsemem.patch
I don't know what
This patch makes a needlessly global struct static.
Signed-off-by: Adrian Bunk [EMAIL PROTECTED]
--- linux-2.6.11-mm3-full/net/ipv4/inetpeer.c.old 2005-03-15
13:29:32.0 +0100
+++ linux-2.6.11-mm3-full/net/ipv4/inetpeer.c 2005-03-15 13:30:13.0
+0100
@@ -92,9 +92,9 @@
This patch makes a needlessly global function static.
Signed-off-by: Adrian Bunk [EMAIL PROTECTED]
--- linux-2.6.11-mm3-full/net/ipv6/ndisc.c.old 2005-03-15 13:33:29.0
+0100
+++ linux-2.6.11-mm3-full/net/ipv6/ndisc.c 2005-03-15 13:34:03.0
+0100
@@ -1594,10 +1594,11 @@
pktgen_xmit is already inline but not static.
This doesn't make much sense - especially since there's no external user
of this function.
Signed-off-by: Adrian Bunk [EMAIL PROTECTED]
--- linux-2.6.11-mm3-full/net/core/pktgen.c.old 2005-03-15 13:25:04.0
+0100
+++
On Tue, Mar 15, 2005 at 03:44:28PM +0100, Ingo Molnar wrote:
let me put it another way: this is a security hole. seccomp is now a way
to evade the auditing of read/write syscalls done to an opened file.
Please fix this.
This is not true, the auditing of read/write will work fine on the
* Andrea Arcangeli [EMAIL PROTECTED] wrote:
This is not true, the auditing of read/write will work fine on the
seccomp task too. I guess you overlooked something in the code.
yeah, you are right - it's there. You are driving seccomp off
do_syscall_trace(), which does audit_syscall_entry().
* Andrea Arcangeli [EMAIL PROTECTED] wrote:
which quite likely wont be provable in the foreseeable future).
Please mention a _single_ bug that could allow you to escape the
seccomp jail in linux since 2.4.0 on x86 and x86-64 (and with escape I
don't mean sniffing data with mmx not being
On Sat, Mar 12, 2005 at 03:42:22AM -0800, Andrew Morton wrote:
...
All 606 patches:
...
megaraid_sas-announcing-new-module-for.patch
megaraid_sas: Announcing new module for LSI Logic's SAS based MegaRAID
controllers
...
Enormous stack usage:
- megasas_init_mfi (due to ctrl_info)
Big stack
On Sat, Mar 12, 2005 at 03:42:22AM -0800, Andrew Morton wrote:
...
All 606 patches:
...
megaraid_sas-announcing-new-module-for.patch
megaraid_sas: Announcing new module for LSI Logic's SAS
based MegaRAID controllers
...
Enormous stack usage:
- megasas_init_mfi (due to ctrl_info)
Big stack
Albert Cahalan wrote:
Note that the admin hopefully does not normally run as root.
The admin should be using a normal user account most of the
time, to reduce the damage caused by his accidents.
Openwall and GrSecurity solved this by having a special group that can
see everything, just like root.
See below.
On Mon, 14 Mar 2005, Andrew Morton wrote:
You triggered my trivia twitch.
Jason Davis [EMAIL PROTECTED] wrote:
- * ES7000 has no legacy identity mappings
+ * Older generations of ES7000 have no legacy identity mappings
*/
- if (es7000_plat)
+ if (es7000_plat es7000_plat 2)
(snipped the CC list - hope that's ok)
No - it's not ok.
--
I won't rest till it's the best ...
Programmer, Linux Scalability
Paul Jackson [EMAIL PROTECTED] 1.650.933.1373,
1.925.600.0401
-
To unsubscribe from this list: send the line
Is this problem still being tracked?
I have figured out a work around of adding a 1 second pause in nash
after the ata_piix driver is loaded. Something has changed in the
driver initialization timing such that later stages of boot try to
access the driver before the driver has created the device
maximilian attems wrote:
thanks a lot for your review!
you are right much better, added __init to W6692Version().
#Signed-off-by: maximilian attems [EMAIL PROTECTED]
Acked-by: Randy Dunlap [EMAIL PROTECTED]
diff -pruN -X dontdiff linux-2.6.11-bk8/drivers/isdn/hisax/w6692.c
On Mon, 2005-03-14 at 19:22 -0800, Christoph Lameter wrote:
On Mon, 14 Mar 2005, Albert Cahalan wrote:
When the vsyscall page is created, copy the one needed function
into it. The kernel is already self-modifying in many places; this
is nothing new.
AFAIK this will only works on ia32
On Tue, Mar 15 2005, Jon Smirl wrote:
Is this problem still being tracked?
I have figured out a work around of adding a 1 second pause in nash
after the ata_piix driver is loaded. Something has changed in the
driver initialization timing such that later stages of boot try to
access the
Laurent CARON wrote:
shafa.hidee wrote:
Hi All,
Where we can find specs for writing driver for Intel PRO 100 card.
Regards
Shafahidee
already supported.
isn't it?
Yes, it is.
You can find a developer's manual for the 8255x NIC at
Albert Cahalan wrote:
I know it works for PowerPC. You'll need an isync instruction
of course. You may also want a sync instruction and some code
to invalidate the cache.
For PPC you'll want to flush the dcache, then invalidate the icache.
This will ensure that it works on all processors.
Chris
On Tue, 15 Mar 2005 08:32:27 -0600 Hollis Blanchard [EMAIL PROTECTED] wrote:
On Mar 14, 2005, at 9:34 PM, Stephen Rothwell wrote:
Since you brought this file to my attention, I figured I might as well
do
some simple cleanups. This patch does:
- single bit int bitfields are a bit
1 - 100 of 750 matches
Mail list logo
