Kevin Hilman writes:
> Bartosz Golaszewski writes:
>
>> Create a new driver for the da8xx DDR2/mDDR controller and implement
>> support for writing to the Peripheral Bus Burst Priority Register.
>>
>> Signed-off-by: Bartosz Golaszewski
From: Frank Rowand
Signed-off-by: Frank Rowand
---
drivers/of/resolver.c | 48 +---
1 file changed, 17 insertions(+), 31 deletions(-)
diff --git a/drivers/of/resolver.c b/drivers/of/resolver.c
Hi all,
Here are some changes to add generic helpers for managing pinctrl groups and
functions.
Regards,
Tony
Tony Lindgren (5):
pinctrl: core: Use delayed work for hogs
pinctrl: core: Add generic pinctrl functions for managing groups
pinctrl: core: Add generic pinctrl functions for
From: Frank Rowand
Remove comments that state the obvious, to reduce clutter
Signed-off-by: Frank Rowand
---
drivers/of/resolver.c | 31 ++-
1 file changed, 2 insertions(+), 29 deletions(-)
diff --git
i.MX6QP added new reigster bit PROFILE_SEL in MADPCR0.
need set it at perf start.
Signed-off-by: Frank Li
---
arch/arm/mach-imx/mmdc.c | 45 +++--
1 file changed, 39 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-imx/mmdc.c
From: Frank Rowand
Signed-off-by: Frank Rowand
---
drivers/of/resolver.c | 22 +++---
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/of/resolver.c b/drivers/of/resolver.c
index
From: Frank Rowand
Signed-off-by: Frank Rowand
---
drivers/of/resolver.c | 18 --
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/of/resolver.c b/drivers/of/resolver.c
index 4e6df385118b..664c97e1ecb4
From: Frank Rowand
Signed-off-by: Frank Rowand
---
drivers/of/resolver.c | 51 ---
1 file changed, 32 insertions(+), 19 deletions(-)
diff --git a/drivers/of/resolver.c b/drivers/of/resolver.c
From: Frank Rowand
Signed-off-by: Frank Rowand
---
drivers/of/resolver.c | 172 +-
1 file changed, 85 insertions(+), 87 deletions(-)
diff --git a/drivers/of/resolver.c b/drivers/of/resolver.c
We can now drop the driver specific code for managing functions.
Signed-off-by: Tony Lindgren
---
drivers/pinctrl/Kconfig | 2 +-
drivers/pinctrl/pinctrl-single.c | 134 ++-
2 files changed, 19 insertions(+), 117 deletions(-)
From: Frank Rowand
Signed-off-by: Frank Rowand
---
drivers/of/resolver.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/of/resolver.c b/drivers/of/resolver.c
index 708daca1d522..76c09cb57eae 100644
---
We can add generic helpers for function handling for cases where the pin
controller driver does not need to use static arrays.
Signed-off-by: Tony Lindgren
---
drivers/pinctrl/Kconfig | 4 ++
drivers/pinctrl/core.c | 2 +
drivers/pinctrl/core.h | 18 +
From: Frank Rowand
drivers/of/resolve.c is a bit difficult to read. Clean it up so
that review of future overlay related patches will be easier.
Most of the patches are intended to be reformatting, with no functional
change. Patches that are expected to have a
>> + u16 hdr_len = ETH_HLEN + sizeof(struct tcphdr);
> Compiler may optmize this, but maybe move hdr_len to [*] ?>
There are other places in the stack where a u16 is used for the
same purpose. So I'll rather stick to that convention.
I'll make the other formatting changes you suggested and
On Tue, Oct 25, 2016 at 1:36 PM, Nick Dyer wrote:
> We have encountered some RMI4 firmwares where there are blank pages in
> between PDT pages which contain functions. This change makes them
> correctly enumerate all functions on the device.
>
> Tested on S7817 (has empty page
After a recent bugfix, we get a warning about the use of an uninitialized
variable:
drivers/staging/lustre/lnet/libcfs/linux/linux-cpu.c: In function
'cfs_cpt_table_create_pattern':
drivers/staging/lustre/lnet/libcfs/linux/linux-cpu.c:833:7: error: 'str' may be
used uninitialized in this
Hi Arnaldo,
On Tue, Oct 25, 2016 at 03:07:46PM -0300, Arnaldo Carvalho de Melo wrote:
> Em Mon, Oct 24, 2016 at 11:02:43AM +0900, Namhyung Kim escreveu:
> > Applying cpu color always doesn't help readability IMHO. Instead it
> > might be better to applying the color when there's an activity on
On Tue, Oct 25, 2016 at 4:55 PM, Sebastian Reichel wrote:
> Hi,
>
> On Wed, Aug 24, 2016 at 06:24:30PM -0500, Rob Herring wrote:
>> This is a new approach to supporting UART slave devices using the
>> existing serio bus. After Arnd's proding, I took another look at serio
>> and
On 10/25/2016 2:56 PM, John Stultz wrote:
> On Tue, Oct 25, 2016 at 2:29 PM, John Youn wrote:
>> On 10/19/2016 11:00 PM, John Stultz wrote:
>>> I had seen some odd behavior with HiKey's usb-gadget interface
>>> that I finally seemed to have chased down. Basically every
On 10/25/16 21:24, Laszlo Ersek wrote:
> On 10/25/16 20:42, Alex Williamson wrote:
>> FWIW, I think the reason
>> this hasn't been done to date is that PCI bus addresses (except for
>> root bus devices) are not stable. Depending on the system, the address
>> of a given device may change, not
On 10/25/2016 12:20 PM, Aneesh Kumar K.V wrote:
> Dave Hansen writes:
>> On 10/23/2016 09:31 PM, Anshuman Khandual wrote:
>>> VMAs containing coherent device memory should be marked with VM_CDM. These
>>> VMAs need to be identified in various core kernel paths and this new
> -Original Message-
> From: Arnd Bergmann [mailto:a...@arndb.de]
> Sent: Tuesday, October 25, 2016 4:15 AM
> To: Baoyou Xie
> Cc: Deucher, Alexander; Dave Airlie; Zhu, Rex; Zhou, Jammy; Huang,
> JinHuiEric; StDenis, Tom; Edward O'Callaghan; Prosyak, Vitaly; Yang, Eric;
> Yang, Young;
On Tuesday, October 25, 2016 1:24:55 PM CEST David Laight wrote:
> > diff --git a/drivers/net/wireless/st/cw1200/wsm.c
> > b/drivers/net/wireless/st/cw1200/wsm.c
> > index 680d60eabc75..094e6637ade2 100644
> > --- a/drivers/net/wireless/st/cw1200/wsm.c
> > +++
On 10/25, walter harms wrote:
> Am 24.10.2016 22:43, schrieb Christophe JAILLET:
> > @@ -220,6 +218,12 @@ static void __init _of_pll_clk_init(struct device_node
> > *node, bool pllctrl)
> >
> > out:
> > pr_err("%s: error initializing pll %s\n", __func__, node->name);
> > + if
Hi Marc, Lorenzo,
On 2016-10-20 13:51, Marc Zyngier wrote:
On 20/10/16 17:48, Lorenzo Pieralisi wrote:
Hi Agustin,
On Tue, Oct 18, 2016 at 01:41:48PM -0400, Agustin Vega-Frias wrote:
This allows irqchip drivers to associate an ACPI DSDT device to
an IRQ domain and provides support for using
On Tuesday, October 25, 2016 3:23:34 PM CEST Imran Khan wrote:
> On 10/21/2016 4:03 PM, Arnd Bergmann wrote:
> >> +/* socinfo: sysfs functions */
> >
> > This seems overly verbose, having both raw and human-readable
> > IDs is generally not necessary, pick one of the two. If you
> > need any
From: Frank Rowand
A small number of such comparisons remain where they provide more
clarity of the numeric nature of a variable.
Signed-off-by: Frank Rowand
---
drivers/of/resolver.c | 42 --
1 file
From: Frank Rowand
Signed-off-by: Frank Rowand
---
drivers/of/resolver.c | 10 +-
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/of/resolver.c b/drivers/of/resolver.c
index 3d123b612789..0ce38aa0ed3c 100644
---
From: Frank Rowand
Signed-off-by: Frank Rowand
---
drivers/of/resolver.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/of/resolver.c b/drivers/of/resolver.c
index 664c97e1ecb4..3f7cf569c7ea 100644
---
From: Frank Rowand
This unused variable is a reminder that symbols in overlays are
not available to subsequent overlays. If such a feature is
desired then there are several ways it could be implemented.
Signed-off-by: Frank Rowand
---
On Tue, 2016-10-25 at 13:58 -0700, frowand.l...@gmail.com wrote:
> From: Frank Rowand
>
> Remove comments that state the obvious, to reduce clutter
Some of these removals might be overly aggressive.
> diff --git a/drivers/of/resolver.c b/drivers/of/resolver.c
[]
> @@
Building the caam driver on arm64 produces a harmless warning:
drivers/crypto/caam/caamalg.c:140:139: warning: comparison of distinct pointer
types lacks a cast
We can use min_t to tell the compiler which type we want it to use
here.
Fixes: 5ecf8ef9103c ("crypto: caam - fix sg dump")
Hi!
Early on in my boot procedure I create an overlay and shuffle
things around a bit so that the original rootfs stays readonly
at the bottom of an overlayed readwrite fs. This way I can just
toss out the overlayed fs and have a clean and reliable way to
do a "factory-reset". Both the read-only
Hi,
It looks like Nicholas submitted this doc a while back as patch 2/2:
"[PATCH 2/2] doc: detailed documentation for completion"
http://lkml.iu.edu/hypermail/linux/kernel/1412.2/03676.html
where patch 1/2 got merged as this:
202799be447b doc: brief user documentation for completion
The virtio committee recently ratified a change, VIRTIO-152, which
defines the mtu field to be 'max' MTU, not simply desired MTU.
This commit brings the virtio-net device in compliance with VIRTIO-152.
Additionally, drop the max_mtu branch - it cannot be taken since the u16
returned by
On Tuesday, October 25, 2016 4:26:28 PM CEST Sriram Dash wrote:
> Do not use dma_coerce_mask_and_coherent for hcd.
>
> Signed-off-by: Arnd Bergmann
The patch is good, but please follow the usual rules for submitting
someone else's patch:
- As the first line, have "From: Arnd
On 10/22, Xiaolong Zhang wrote:
> On 四, 10月 20, 2016 at 04:01:03下午 -0700, Stephen Boyd wrote:
> > On 10/11, Orson Zhai wrote:
> > > From: Xiaolong Zhang
> > >
> > > When common kernel setups fixed clock, of_clk_provider will be
> > > registerred.
> > > But there
Impact: cleanup
Cc: Benjamin Herrenschmidt
Cc: Paul Mackerras
Cc: Michael Ellerman
Cc: Andy Lutomirski
Cc: Oleg Nesterov
Cc: linuxppc-...@lists.ozlabs.org
Cc: linux...@kvack.org
The sdhci capabilities registers can be incorrect. The sdhci-caps-mask
and sdhci-caps dt properties specify which bits of the registers are
incorrect and what their values should be. This patch makes the sdhci
driver use those properties to correct the caps during
__sdhci_read_caps.
During
For various reasons the sdhci caps register can be incorrect. This patch set
introduces a general way to correct the bits when they are read to accurately
reflect the capabilties of the controller/board combo.
The first patch creates sdhci-caps and sdhci-caps-mask dt properties that
combined
On some systems the sdhci capabilty registers are incorrect for one
reason or another.
The sdhci-caps-mask property specifies which bits in the registers
are incorrect and should be turned off before using sdhci-caps to turn
on bits.
The sdhci-caps property specifies which bits should be turned
> From: Aaron Conole
>
> The virtio committee recently ratified a change, VIRTIO-152, which
> defines the mtu field to be 'max' MTU, not simply desired MTU.
>
> This commit brings the virtio-net device in compliance with VIRTIO-152.
>
> Additionally, drop the max_mtu branch -
Add xo clock support required to boot up Qualcomm ADSP processor.
The ADSP remoteproc driver keeps xo clock enabled until the
driver receives "handover" irq, in order to allow ADSP processor
to vote for xo clock with rpm.
Signed-off-by: Sarangdhar Joshi
---
When we get a spurious interrupt in fsl_espi_irq, we end up
processing four uninitalized bytes of data, as shown in this
warning message:
drivers/spi/spi-fsl-espi.c: In function 'fsl_espi_irq':
drivers/spi/spi-fsl-espi.c:462:4: warning: 'rx_data' may be used
uninitialized in this function
On Tuesday, October 25, 2016 8:13:09 PM CEST Mark Brown wrote:
>
> Not enough information to check signature validity. Show Details
> On Mon, Oct 24, 2016 at 10:37:53PM +0200, Arnd Bergmann wrote:
>
> > I think my patch (the version I sent) should ideally make it into
> > v4.9 as a bugfix.
Hi,
On 10/23/2016 11:26 PM, Viresh Kumar wrote:
On 23-10-16, 20:08, Dave Gerlach wrote:
Overall this series looks good to me apart from a few small things. Most
importantly I was able to get a working implementation using two regulators
on ti dra7xx platform with proper sequencing built on top
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.
Cc: Michal Simek
Signed-off-by: Alexander Duyck
---
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.
Cc: Yoshinori Sato
Cc: Rich Felker
Cc:
Add support for mapping and unmapping a page with attributes. The primary
use for this is currently to allow for us to pass the
DMA_ATTR_SKIP_CPU_SYNC attribute when mapping and unmapping a page. On
some architectures such as ARM the synchronization has significant overhead
and if we are already
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.
Cc: "David S. Miller"
Cc: sparcli...@vger.kernel.org
Signed-off-by: Alexander Duyck
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.
Cc: Chris Metcalf
Signed-off-by: Alexander Duyck
---
This reverts commit f9d40f6a9921 ("igb: Revert support for build_skb in
igb") and adds a few changes to update it to work with the latest version
of igb. We are now able to revert the removal of this due to the fact
that with the recent changes to the page count and the use of
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.
Cc: Benjamin Herrenschmidt
Cc: Paul Mackerras
Cc: Michael
The ARM architecture provides a mechanism for deferring cache line
invalidation in the case of map/unmap. This patch makes use of this
mechanism to avoid unnecessary synchronization.
A secondary effect of this change is that the portion of the page that has
been synchronized for use by the CPU
This patch updates the driver code so that we do bulk updates of the page
reference count instead of just incrementing it by one reference at a time.
The advantage to doing this is that we cut down on atomic operations and
this in turn should give us a slight improvement in cycles per packet. In
This patch adds a function that allows us to batch free a page that has
multiple references outstanding. Specifically this function can be used to
drop a page being used in the page frag alloc cache. With this drivers can
make use of functionality similar to the page frag alloc cache without
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.
Cc: Ralf Baechle
Cc: Keguang Zhang
Cc:
From: Csaba Kertesz
Add a hwmon entry to get the temperature from the die of imx53
SATA.
The original patch was made by Richard Zhu for kernel 2.6.x:
ENGR00134041-MX53-Add-the-SATA-AHCI-temperature-monitor.patch
Signed-off-by: Fabien Lahoudere
On Tuesday, October 25, 2016 9:48:22 AM CEST Jason Gunthorpe wrote:
>
> Using a completion to model exclusive ownership seems convoluted to
> me - is that a thing now? What about an atomic?
I also totally missed how this is used. I initially mentioned to Binoy
that almost all semaphores can
On 10/25, Viresh Kumar wrote:
> On 24-10-16, 16:14, Stephen Boyd wrote:
> > On 10/20, Viresh Kumar wrote:
> > > Pass the entire supply structure instead of all of its fields.
> > >
> > > Signed-off-by: Viresh Kumar
> > > ---
> >
> > This patch should be combined with
We have encountered some RMI4 firmwares where there are blank pages in
between PDT pages which contain functions. This change makes them
correctly enumerate all functions on the device.
Tested on S7817 (has empty page 2).
Signed-off-by: Nick Dyer
---
From: Frank Rowand
Signed-off-by: Frank Rowand
---
drivers/of/resolver.c | 28
1 file changed, 28 deletions(-)
diff --git a/drivers/of/resolver.c b/drivers/of/resolver.c
index 4ff0220d7aa2..93a7ca0bf98c 100644
We can add generic helpers for pin group handling for cases where the pin
controller driver does not need to use static arrays.
Signed-off-by: Tony Lindgren
---
drivers/pinctrl/Kconfig | 3 +
drivers/pinctrl/core.c | 178
From: Frank Rowand
The single line blocks were created by previous patches in the series.
Signed-off-by: Frank Rowand
---
drivers/of/resolver.c | 25 -
1 file changed, 8 insertions(+), 17 deletions(-)
diff --git
On 10/25/16 13:58, frowand.l...@gmail.com wrote:
> From: Frank Rowand
>
> drivers/of/resolve.c is a bit difficult to read. Clean it up so
> that review of future overlay related patches will be easier.
< snip >
Hi Pantelis,
Can you test this patch series on some
Having the pin control framework call pin controller functions
before it's probe has finished is not nice as the pin controller
device driver does not yet have struct pinctrl_dev handle.
Let's fix this issue by adding deferred work for hogs. This is
needed to be able to add pinctrl generic helper
Naga Sureshkumar Relli,
On 25.10.2016 08:05, Naga Sureshkumar Relli wrote:
> Hi,
>
> We are testing UBIFS (NOR) on Zynq Ultrascale+ MPSoC GQSPI controller driver.
> Apart from my previous mail thread about UBIFS, i.e along with dma issue I am
> facing one more
> Problem related to offsets.
>
>
A recent rework removed the initialization of the successful return
code from lov_getstripe:
drivers/staging/lustre/lustre/lov/lov_pack.c: In function 'lov_getstripe':
drivers/staging/lustre/lustre/lov/lov_pack.c:426:9: error: 'rc' may be used
uninitialized in this function
On Tue, Oct 25, 2016 at 02:21:32PM -0300, Arnaldo Carvalho de Melo wrote:
> Em Mon, Oct 24, 2016 at 07:03:32PM +0200, Jiri Olsa escreveu:
> > On Mon, Oct 24, 2016 at 12:00:03PM +0900, Namhyung Kim wrote:
> > > The -i and -v options can be used in subcommands so enable cascading the
> > >
The mapping function should always return DMA_ERROR_CODE when a mapping has
failed as this is what the DMA API expects when a DMA error has occurred.
The current function for mapping a page in Xen was returning either
DMA_ERROR_CODE or 0 depending on where it failed.
On x86 DMA_ERROR_CODE is 0,
The first 22 patches in the set add support for the DMA attribute
DMA_ATTR_SKIP_CPU_SYNC on multiple platforms/architectures. This is needed
so that we can flag the calls to dma_map/unmap_page so that we do not
invalidate cache lines that do not currently belong to the device. Instead
we have to
The use of DMA_ATTR_SKIP_CPU_SYNC was not consistent across all of the DMA
APIs in the arch/arm folder. This change is meant to correct that so that
we get consistent behavior.
Signed-off-by: Alexander Duyck
---
arch/frv/mb93090-mb00/pci-dma-nommu.c | 14
The use of DMA_ATTR_SKIP_CPU_SYNC was not consistent across all of the DMA
APIs in the arch/arm folder. This change is meant to correct that so that
we get consistent behavior.
Acked-by: Hans-Christian Noren Egtvedt
Signed-off-by: Alexander Duyck
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
later via a sync_for_cpu or sync_for_device call.
Cc: Mark Salter
Cc: Aurelien Jacquiot
Signed-off-by:
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.
Cc: Ley Foon Tan
Signed-off-by: Alexander Duyck
---
As a first step to making DMA_ATTR_SKIP_CPU_SYNC apply to architectures
beyond just ARM I need to make it so that the swiotlb will respect the
flag. In order to do that I also need to update the swiotlb-xen since it
heavily makes use of the functionality.
Cc: Konrad Rzeszutek Wilk
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
via a sync_for_cpu or sync_for_device call.
Cc: "James E.J. Bottomley"
Cc: Helge Deller
Cc:
There are no users for swiotlb_map_sg so we might as well just drop it.
Acked-by: Konrad Rzeszutek Wilk
Signed-off-by: Alexander Duyck
---
include/linux/swiotlb.h |4
lib/swiotlb.c |8
2 files changed, 12
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
later via a sync_for_cpu or sync_for_device call.
Cc: Vineet Gupta
Cc: linux-snps-...@lists.infradead.org
Signed-off-by: Alexander
The use of DMA_ATTR_SKIP_CPU_SYNC was not consistent across all of the DMA
APIs in the arch/arm folder. This change is meant to correct that so that
we get consistent behavior.
Cc: Steven Miao
Signed-off-by: Alexander Duyck
---
I wrote it the original way precisely for readability; it's easier, at least
to me, to read and modify the old way.
However, in my development version I happen to be printing a lot more
stuff.
To test, I collapsed 18 of my seq_printf's into one call. That reduced the
function size by a couple
The use of DMA_ATTR_SKIP_CPU_SYNC was not consistent across all of the DMA
APIs in the arch/arm folder. This change is meant to correct that so that
we get consistent behavior.
Cc: Russell King
Signed-off-by: Alexander Duyck
---
On Tue, Oct 25, 2016 at 2:29 PM, John Youn wrote:
> On 10/19/2016 11:00 PM, John Stultz wrote:
>> I had seen some odd behavior with HiKey's usb-gadget interface
>> that I finally seemed to have chased down. Basically every other
>> time I pluged in the OTG port, the gadget
For whatever reason, the X1 Yoga doesn't support the normal method of
querying for tablet mode. Instead of providing the MHKG method under the
hotkey handle, we're instead given the CMMD method under the EC handle.
Values on this handle are either 0x1, laptop mode, or 0x6, tablet mode.
Cleanup patches for vDSO on powerpc.
Originally, I wanted to add vDSO remapping on arm/aarch64 and
I decided to cleanup that part on powerpc.
I've add a hook for vm_ops for vDSO just like I did for x86.
Other changes - reduce exhaustive code duplication.
No visible to userspace changes expected.
On 25/10/16 20:11, Lars-Peter Clausen wrote:
> On 10/25/2016 09:04 PM, Colin King wrote:
>> From: Colin Ian King
>>
>> In the case that the read size is not 2 or 4 bytes
>> then maxim_thermocouple_read is not initializing ret and
>> hence may return early with a bogus
On Sat, Oct 22, 2016 at 12:39:27AM +0300, Jarkko Sakkinen wrote:
> Use cpu_to_b32 at the time it is needed in enum tpm_capabilities and
> enum tpm_sub_capabilities in order to be consistent with the other
> enums in drivats/char/tpm/tpm.h.
>
> Signed-off-by: Jarkko Sakkinen
On Fri, Oct 21, 2016 at 06:11:41PM +0300, Jarkko Sakkinen wrote:
> On Thu, Oct 20, 2016 at 02:24:21PM -0600, Jason Gunthorpe wrote:
> > On Thu, Oct 20, 2016 at 05:00:11PM +0300, Jarkko Sakkinen wrote:
> >
> > > > > I have a 4th Gen Core NUC where I experienced this issue. It reported
> > > > >
On Tuesday, October 25, 2016 4:26:27 PM CEST Sriram Dash wrote:
> Do not require dma_set_coherent_mask for hcd
>
> Signed-off-by: Arnd Bergmann
Aside from the comments I had for patch 3, you are doing two
different things here:
> diff --git a/drivers/usb/dwc3/dwc3-st.c
On 10/25/2016 7:15 AM, Randy Li wrote:
> I forget to add a dummy function in case the CONFIG_GENERIC_PHY
> is disabled.
>
> Signed-off-by: Randy Li
Fixes: cac18ecb6f44 ("phy: Add reset callback")
Tested-by: John Youn
Hi Kishon,
Can you take this for
On Tue, Oct 25, 2016 at 05:50:43AM -0600, Stephen Bates wrote:
> Hi Dave and Christoph
>
> On Fri, Oct 21, 2016 at 10:12:53PM +1100, Dave Chinner wrote:
> > On Fri, Oct 21, 2016 at 02:57:14AM -0700, Christoph Hellwig wrote:
> > > On Fri, Oct 21, 2016 at 10:22:39AM +1100, Dave Chinner wrote:
> > >
This reverts commit 4abad2ca4a4d ("mm: new arch_remap() hook") and
commit 2ae416b142b6 ("mm: new mm hook framework").
It also keeps the same functionality of mremapping vDSO blob with
introducing vm_special_mapping mremap op for powerpc.
Cc: Laurent Dufour
Cc:
Hi Cyrille,
On Tue, Oct 25, 2016 at 2:38 PM, Jagan Teki wrote:
> On Mon, Oct 24, 2016 at 7:37 PM, Cyrille Pitchen
> wrote:
>> Le 24/10/2016 à 14:09, Cyrille Pitchen a écrit :
>>> Hi Jagan,
>>>
>>> Le 24/10/2016 à 09:41, Jagan Teki a écrit :
On
Aaron Conole writes:
>> From: Aaron Conole
>>
>> The virtio committee recently ratified a change, VIRTIO-152, which
>> defines the mtu field to be 'max' MTU, not simply desired MTU.
>>
>> This commit brings the virtio-net device in compliance with
On Tue, 25 Oct 2016, Bhumika Goyal wrote:
> Check for iommu_gather_ops structures that are only stored in the tlb
> field of an io_pgtable_cfg structure. The tlb field is of type
> const struct iommu_gather_ops *, so iommu_gather_ops structures
> having this property can be declared as const.
>
On Tue, 25 Oct 2016, Bhumika Goyal wrote:
> Check for iommu_gather_ops structures that are only stored in the tlb
> field of an io_pgtable_cfg structure. The tlb field is of type
> const struct iommu_gather_ops *, so iommu_gather_ops structures
> having this property can be declared as const.
>
On x86, the cw1200 driver produces a rather silly warning about the
possible use of the 'ret' variable without an initialization
presumably after being confused by the architecture specific definition
of WARN_ON:
drivers/net/wireless/st/cw1200/wsm.c: In function ‘wsm_handle_rx’:
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
later via a sync_for_cpu or sync_for_device call.
Cc: Geert Uytterhoeven
Cc: linux-m...@lists.linux-m68k.org
Signed-off-by:
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
later via a sync_for_cpu or sync_for_device call.
Cc: Richard Kuo
Cc: linux-hexa...@vger.kernel.org
Signed-off-by: Alexander Duyck
Hi,
On Wed, Aug 24, 2016 at 06:24:30PM -0500, Rob Herring wrote:
> This is a new approach to supporting UART slave devices using the
> existing serio bus. After Arnd's proding, I took another look at serio
> and decided extending it does make sense. Using serio primarily requires
> adding DT
1 - 100 of 1730 matches
Mail list logo