On 2/15/07, Patrick Ale [EMAIL PROTECTED] wrote:
On 2/15/07, Tejun Heo [EMAIL PROTECTED] wrote:
Yeah and about the libsata/libata thingy, it is libata of course :)
libsata I will test later on, so be prepared allready for more ranting for me.
It is all libata! Whether pata or sata, it's still
On 2/11/07, Tejun Heo [EMAIL PROTECTED] wrote:
Please test the attached patch over 2.6.20.
No luck for me. I'm using pata_sis. Some error bits:
agpgart: Found an AGP 3.0 compliant device at :00:00.0.
agpgart: Putting AGP V3 device at :00:00.0 into 16x mode
agpgart: SiS delay
Hello. I apologize if this may sound stupid/unknowledgeable. I'm
currently fooling around with real time voice conferencing
applications which use the UDP protocol. However, certain firewalls
don't allow UDP traffic, therefore I tried UDP over TCP as a
workaround. This failed miserably, as the
On 12/27/06, Tejun Heo [EMAIL PROTECTED] wrote:
Ioan Ionita wrote:
pata_sis will not work with my CD-ROM
dmesg output when trying to mount a cd-rom:
Please post full dmesg including all boot messages.
Sorry for the delay. Here's the full dmesg as requested. Please don't
take into account
pata_sis will not work with my CD-ROM
dmesg output when trying to mount a cd-rom:
ata2.00: qc timeout (cmd 0xa0)
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: (BMDMA stat 0x24)
ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x28 data 4096 in
res
I gave libata a shot. Hardisk works fine. However the CDROM doesn't.
It would seem that the CDROM is detected, but the device node is not
created.
I do have libata.atapi_enabled=1 as a kernel parameter. This is a Vaio
laptop, with SiS 5513, PATA only, no SATA ports.
Did I miss anything?
Here's
On 11/16/06, Alan [EMAIL PROTECTED] wrote:
On Thu, 16 Nov 2006 18:22:47 -0500
Ioan Ionita [EMAIL PROTECTED] wrote:
I gave libata a shot. Hardisk works fine. However the CDROM doesn't.
It would seem that the CDROM is detected, but the device node is not
created.
I do have
On 11/16/06, Ioan Ionita [EMAIL PROTECTED] wrote:
On 11/16/06, Alan [EMAIL PROTECTED] wrote:
On Thu, 16 Nov 2006 18:22:47 -0500
Ioan Ionita [EMAIL PROTECTED] wrote:
I gave libata a shot. Hardisk works fine. However the CDROM doesn't.
It would seem that the CDROM is detected
On 11/17/06, Alan Cox [EMAIL PROTECTED] wrote:
On Thu, Nov 16, 2006 at 08:34:03PM -0500, Ioan Ionita wrote:
ata2.00: limiting speed to UDMA/25
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: (BMDMA stat 0x20)
ata2.00: tag 0 cmd 0xa0 Emask 0x5 stat 0x51 err 0x51
On Jan 15, 2008 8:09 PM, Stephen Hemminger [EMAIL PROTECTED] wrote:
On Tue, 15 Jan 2008 13:01:47 +0200
Ioan Ionita [EMAIL PROTECTED] wrote:
Is Wake On Lan enabled in the BIOS?
I don't have a Wake on Lan option in BIOS, only wake on pci, i assume
it's the same. It was disabled. I enabled
Hello,
Since upgrading from 2.6.21 to 2.6.22-rc2, I started seeing some
segfaults in dmesg.
2.6.22-rc1-git2 even locked up on me at one point.
I'm using SLUB. I haven't yet found a way to easily reproduce the
problem.. Once I do, I'll try a git bisect
gam_server[4269]: segfault at
On 5/2/07, Alan Cox [EMAIL PROTECTED] wrote:
This is almost certainly a problem outside of the IDE handling in that
case. The jmicron controllers are smart, there is basically no code to
the IDE driver to go wrong (especially in the case of using the old IDE
for the PATA port where you basically
Hello. I apologize if this may sound stupid/unknowledgeable. I'm
currently fooling around with real time voice conferencing
applications which use the UDP protocol. However, certain firewalls
don't allow UDP traffic, therefore I tried UDP over TCP as a
workaround. This failed miserably, as the
pata_sis will not work with my CD-ROM
dmesg output when trying to mount a cd-rom:
ata2.00: qc timeout (cmd 0xa0)
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: (BMDMA stat 0x24)
ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x28 data 4096 in
res
On 12/27/06, Tejun Heo <[EMAIL PROTECTED]> wrote:
Ioan Ionita wrote:
> pata_sis will not work with my CD-ROM
>
> dmesg output when trying to mount a cd-rom:
Please post full dmesg including all boot messages.
Sorry for the delay. Here's the full dmesg as requested. Pl
I gave libata a shot. Hardisk works fine. However the CDROM doesn't.
It would seem that the CDROM is detected, but the device node is not
created.
I do have libata.atapi_enabled=1 as a kernel parameter. This is a Vaio
laptop, with SiS 5513, PATA only, no SATA ports.
Did I miss anything?
Here's
On 11/16/06, Alan <[EMAIL PROTECTED]> wrote:
On Thu, 16 Nov 2006 18:22:47 -0500
"Ioan Ionita" <[EMAIL PROTECTED]> wrote:
> I gave libata a shot. Hardisk works fine. However the CDROM doesn't.
> It would seem that the CDROM is detected, but the device node is
On 11/16/06, Ioan Ionita <[EMAIL PROTECTED]> wrote:
On 11/16/06, Alan <[EMAIL PROTECTED]> wrote:
> On Thu, 16 Nov 2006 18:22:47 -0500
> "Ioan Ionita" <[EMAIL PROTECTED]> wrote:
>
> > I gave libata a shot. Hardisk works fine. However the CDROM doesn't.
&
On 11/17/06, Alan Cox <[EMAIL PROTECTED]> wrote:
On Thu, Nov 16, 2006 at 08:34:03PM -0500, Ioan Ionita wrote:
> >ata2.00: limiting speed to UDMA/25
> >ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> >ata2.00: (BMDMA stat 0x20)
> >ata2.00: tag 0 cm
On 2/15/07, Patrick Ale <[EMAIL PROTECTED]> wrote:
On 2/15/07, Tejun Heo <[EMAIL PROTECTED]> wrote:
Yeah and about the libsata/libata thingy, it is libata of course :)
libsata I will test later on, so be prepared allready for more ranting for me.
It is all libata! Whether pata or sata, it's
On 2/11/07, Tejun Heo <[EMAIL PROTECTED]> wrote:
Please test the attached patch over 2.6.20.
No luck for me. I'm using pata_sis. Some error bits:
agpgart: Found an AGP 3.0 compliant device at :00:00.0.
agpgart: Putting AGP V3 device at :00:00.0 into 16x mode
agpgart: SiS delay
Hello,
Since upgrading from 2.6.21 to 2.6.22-rc2, I started seeing some
segfaults in dmesg.
2.6.22-rc1-git2 even locked up on me at one point.
I'm using SLUB. I haven't yet found a way to easily reproduce the
problem.. Once I do, I'll try a git bisect
gam_server[4269]: segfault at
On 5/2/07, Alan Cox <[EMAIL PROTECTED]> wrote:
This is almost certainly a problem outside of the IDE handling in that
case. The jmicron controllers are smart, there is basically no code to
the IDE driver to go wrong (especially in the case of using the old IDE
for the PATA port where you
On Jan 15, 2008 8:09 PM, Stephen Hemminger <[EMAIL PROTECTED]> wrote:
> On Tue, 15 Jan 2008 13:01:47 +0200
> "Ioan Ionita" <[EMAIL PROTECTED]> wrote:
>
>
> Is Wake On Lan enabled in the BIOS?
I don't have a Wake on Lan option in BIOS, only wake on pci, i assu
24 matches
Mail list logo
