sumes unconditionally in ARM instruction mode
> and then chokes on the presented Thumb-2 code it should execute.
>
> Fix this by using the arm instruction set for all code in
> suspend-imx6.S.
>
> Signed-off-by: Max Krummenacher
Acked-by: Oleksandr Suvorov
>
> ---
>
> a
Add support of sub-functions disabling. It allows one to define
an stmpe sub-function device in devicetree, but keep it disabled.
Signed-off-by: Oleksandr Suvorov
---
drivers/mfd/stmpe.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index
Add support of sub-functions disabling. It allows one to define
an stmpe sub-function device in devicetree, but keep it disabled.
Signed-off-by: Oleksandr Suvorov
---
Changes in v2:
Use for_each_available_child_of_node() instead of checking
of_device_is_available() for each node.
Thanks for
On Wed, Aug 14, 2019 at 1:54 PM Philippe Schenker
wrote:
>
> Add the stmpe-adc DT node as found on Toradex T30 modules
>
> Signed-off-by: Philippe Schenker
Reviewed-by: Oleksandr Suvorov
>
> ---
>
> arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi | 22 ++-
does not enable flexcan functionality, but rather
> eases the effort needed to do so.
>
> Signed-off-by: Max Krummenacher
> Signed-off-by: Philippe Schenker
Reviewed-by: Oleksandr Suvorov
>
> ---
>
> Changes in v4:
> - Move can nodes to module deviceteree include imx
> module for TAMPER7 and TAMPER9 SoC pin and switches on a pull down
> instead of a pullup for the USBC_DET module pin (TAMPER2).
>
> Signed-off-by: Max Krummenacher
> Signed-off-by: Philippe Schenker
> Acked-by: Marcel Ziswiler
Reviewed-by: Oleksandr Suvorov
>
> ---
>
On Mon, Aug 12, 2019 at 5:23 PM Philippe Schenker
wrote:
>
> Add touch controller that is connected over an I2C bus.
>
> Signed-off-by: Philippe Schenker
> Acked-by: Marcel Ziswiler
Reviewed-by: Oleksandr Suvorov
>
> ---
>
> Changes in v4:
> - Add Marcel Zi
On Mon, Aug 12, 2019 at 5:23 PM Philippe Schenker
wrote:
>
> This patch adds some missing pinmuxing that is in the colibri
> standard to the dts.
>
> Signed-off-by: Philippe Schenker
> Acked-by: Marcel Ziswiler
Reviewed-by: Oleksandr Suvorov
>
> ---
>
>
On Mon, Aug 12, 2019 at 5:23 PM Philippe Schenker
wrote:
>
> This adds the common touchscreen that is used with Toradex's
> Eval Boards.
>
> Signed-off-by: Philippe Schenker
Reviewed-by: Oleksandr Suvorov
>
> ---
>
> Changes in v4: None
> Changes in v3
On Mon, Aug 12, 2019 at 5:23 PM Philippe Schenker
wrote:
>
> This commit adds the touchscreens from Toradex so one can enable it.
>
> Signed-off-by: Philippe Schenker
> Acked-by: Marcel Ziswiler
Reviewed-by: Oleksandr Suvorov
>
> ---
>
> Changes in v4:
&g
On Mon, Aug 12, 2019 at 5:23 PM Philippe Schenker
wrote:
>
> This adds the possibility to wake the module with an external signal
> as defined in the Colibri standard
>
> Signed-off-by: Philippe Schenker
> Acked-by: Marcel Ziswiler
Reviewed-by: Oleksandr Suvorov
>
&g
status REF not lock!
>
> Signed-off-by: Stefan Agner
> Signed-off-by: Philippe Schenker
Reviewed-by: Oleksandr Suvorov
> ---
>
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
> arch/arm/boot/dts/imx7-colibri.dtsi | 1 +
> 1 file changed, 1 ins
On Mon, Aug 12, 2019 at 5:22 PM Philippe Schenker
wrote:
>
> Do not change the clock as the power for this phy is switched
> with that clock.
>
> Signed-off-by: Philippe Schenker
> Acked-by: Marcel Ziswiler
Reviewed-by: Oleksandr Suvorov
>
> ---
>
> Changes in
to register its own pm_power_off handler even if someone has registered
this handler earlier.
Useful to change a way to power off the system using DT files.
Oleksandr Suvorov (2):
power: reset: gpio-poweroff: add force mode
dt-bindings: power: reset: gpio-poweroff: Add 'force-mode'
Add 'force-mode' property to allow the driver to load even if
someone has registered the pm_power_off hook earlier.
Signed-off-by: Oleksandr Suvorov
---
.../devicetree/bindings/power/reset/gpio-poweroff.txt | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Doc
Property "force-mode" tells the driver to replace previously
initialized power-off kernel hook and allows gpio-poweroff to
probe and operate successfully in any case.
Signed-off-by: Oleksandr Suvorov
---
drivers/power/reset/gpio-poweroff.c | 27 +--
1 file c
Hi Andrew,
On Mon, Sep 30, 2019 at 3:16 PM Andrew Lunn wrote:
>
> On Mon, Sep 30, 2019 at 10:35:36AM +, Oleksandr Suvorov wrote:
> > to register its own pm_power_off handler even if someone has registered
> > this handler earlier.
> > Useful to change a way to power
power system off.
Oleksandr Suvorov (2):
power: reset: gpio-poweroff: add force mode
dt-bindings: power: reset: gpio-poweroff: Add 'force-mode' property
.../bindings/power/reset/gpio-poweroff.txt| 3 ++
drivers/power/reset/gpio-poweroff.c | 34 +++
2 fil
Add 'force-mode' property to allow the driver to load even if
someone has registered the pm_power_off hook earlier.
Signed-off-by: Oleksandr Suvorov
---
Changes in v2: None
.../devicetree/bindings/power/reset/gpio-poweroff.txt | 3 +++
1 file changed, 3 insertions(+)
di
Property "force-mode" tells the driver to replace previously
initialized power-off kernel hook and allows gpio-poweroff to
probe and operate successfully in any case.
Signed-off-by: Oleksandr Suvorov
---
Changes in v2:
Call next pm_power_off handler if the current one
fails to power
This is a backport to stable kernel versions 4.4 and 4.9.
Oleksandr Suvorov (1):
ASoC: sgtl5000: Improve VAG power and mute control
sound/soc/codecs/sgtl5000.c | 234 +++-
1 file changed, 203 insertions(+), 31 deletions(-)
--
2.20.1
3bc2 ("ASoC: Add Freescale SGTL5000 codec support")
Signed-off-by: Oleksandr Suvorov
[Backport: Replace snd_soc_component_read32() with snd_soc_component_read()]
Reviewed-by: Marcel Ziswiler
Reviewed-by: Fabio Estevam
Reviewed-by: Cezary Rojewski
Link:
https://lore.kernel.org/r/2019071
3bc2 ("ASoC: Add Freescale SGTL5000 codec support")
Signed-off-by: Oleksandr Suvorov
[Backport: Replace snd_soc_component_read32() with snd_soc_component_read()]
Reviewed-by: Marcel Ziswiler
Reviewed-by: Fabio Estevam
Reviewed-by: Cezary Rojewski
Link:
https://lore.kernel.org/r/2019071
This backport is for 4.14-stable.
Oleksandr Suvorov (1):
ASoC: sgtl5000: Improve VAG power and mute control
sound/soc/codecs/sgtl5000.c | 234 +++-
1 file changed, 203 insertions(+), 31 deletions(-)
--
2.20.1
Board supports almost all of them).
>
> So far there is no display or USB functionality supported at all but
> basic console UART, eMMC and Ethernet functionality work fine.
>
> Signed-off-by: Marcel Ziswiler
Reviewed-by: Oleksandr Suvorov
>
> ---
>
> arch/arm64/boot/
Thank you, Cezary!
This is a good idea, I'll rework my patch accordingly.
R&D Engineer
Oleksandr Suvorov
Toradex AG
From: Cezary Rojewski
Sent: Sunday, July 14, 2019 8:17:43 PM
To: Oleksandr Suvorov
Cc: Fabio Estevam; linux-kernel@vger.kernel.
age
- Fix multi-line comment format
Changes in v2:
- Fix patch formatting
- Fix patch formatting
- Fix patch formatting
- Fix patch formatting
- Fix patch formatting
- Fix patch formatting
Oleksandr Suvorov (6):
ASoC: Define a set of DAPM pre/post-up events
ASoC: sgtl5000: Improve VAG power and
Prepare to use SND_SOC_DAPM_PRE_POST_PMU definition to
reduce coming code size and make it more readable.
Signed-off-by: Oleksandr Suvorov
Reviewed-by: Marcel Ziswiler
Reviewed-by: Igor Opaniuk
---
Changes in v4:
- CC the patch to kernel-stable
Changes in v3: None
Changes in v2:
- Fix patch
/data-sheet/SGTL5000.pdf
Signed-off-by: Oleksandr Suvorov
Reviewed-by: Marcel Ziswiler
Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support")
---
Changes in v4:
- Code optimization, simplify function signature
(thanks to Cezary Rojewski for an idea)
- CC the patch to kernel
To enable "zero cross detect" for ADC/HP, change
HP_ZCD_EN/ADC_ZCD_EN bits only instead of writing the whole
CHIP_ANA_CTRL register.
Signed-off-by: Oleksandr Suvorov
Reviewed-by: Marcel Ziswiler
Reviewed-by: Igor Opaniuk
---
Changes in v4: None
Changes in v3: None
Changes in v2:
-
SGTL5000_SMALL_POP is a bit mask, not a value. Usage of
correct definition makes device probing code more clear.
Signed-off-by: Oleksandr Suvorov
Reviewed-by: Marcel Ziswiler
Reviewed-by: Igor Opaniuk
---
Changes in v4: None
Changes in v3: None
Changes in v2:
- Fix patch formatting
sound
If VDDA != VDDIO and any of them is greater than 3.1V, charge pump
source can be assigned automatically [1].
[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
Signed-off-by: Oleksandr Suvorov
Reviewed-by: Marcel Ziswiler
Reviewed-by: Igor Opaniuk
---
Changes in v4: None
Changes in v3
This control mute/unmute the ADC input of SGTL5000
using its CHIP_ANA_CTRL register.
Signed-off-by: Oleksandr Suvorov
Reviewed-by: Marcel Ziswiler
Reviewed-by: Igor Opaniuk
---
Changes in v4: None
Changes in v3: None
Changes in v2:
- Fix patch formatting
sound/soc/codecs/sgtl5000.c | 1
Hello Fabio,
Thank you for your feedback! I've prepared and sent a fixed patchset v4.
--
R&D Engineer
Oleksandr Suvorov
Toradex AG
From: Fabio Estevam
Sent: Monday, July 15, 2019 10:06:57 PM
To: Oleksandr Suvorov
Cc: linux-kernel@vger.k
data sheet [1], to avoid any pops/clicks,
the outputs should be muted during input/output
routing changes.
[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
Cc: sta...@vger.kernel.org
Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support")
Signed-off-by: Oleksandr Su
TL5000 data sheet to commit message
- Add the reference to NXP SGTL5000 data sheet to commit message
- Fix multi-line comment format
Changes in v2:
- Fix patch formatting
- Fix patch formatting
- Fix patch formatting
- Fix patch formatting
- Fix patch formatting
- Fix patch formatting
Oleksandr Suvorov
If VDDA != VDDIO and any of them is greater than 3.1V, charge pump
source can be assigned automatically [1].
[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
Signed-off-by: Oleksandr Suvorov
Reviewed-by: Marcel Ziswiler
Reviewed-by: Igor Opaniuk
Reviewed-by: Fabio Estevam
Prepare to use SND_SOC_DAPM_PRE_POST_PMU definition to
reduce coming code size and make it more readable.
Cc: sta...@vger.kernel.org
Signed-off-by: Oleksandr Suvorov
Reviewed-by: Marcel Ziswiler
Reviewed-by: Igor Opaniuk
Reviewed-by: Fabio Estevam
---
Changes in v5:
- Add explicit stable
SGTL5000_SMALL_POP is a bit mask, not a value. Usage of
correct definition makes device probing code more clear.
Signed-off-by: Oleksandr Suvorov
Reviewed-by: Marcel Ziswiler
Reviewed-by: Igor Opaniuk
Reviewed-by: Fabio Estevam
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
To enable "zero cross detect" for ADC/HP, change
HP_ZCD_EN/ADC_ZCD_EN bits only instead of writing the whole
CHIP_ANA_CTRL register.
Signed-off-by: Oleksandr Suvorov
Reviewed-by: Marcel Ziswiler
Reviewed-by: Igor Opaniuk
Reviewed-by: Fabio Estevam
---
Changes in v5: None
Changes i
This control mute/unmute the ADC input of SGTL5000
using its CHIP_ANA_CTRL register.
Signed-off-by: Oleksandr Suvorov
Reviewed-by: Marcel Ziswiler
Reviewed-by: Igor Opaniuk
Reviewed-by: Fabio Estevam
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2:
- Fix patch
t;>> On Wed, Oct 16, 2019 at 02:51:44PM -0700, Greg Kroah-Hartman wrote:
> >>>>> From: Oleksandr Suvorov
> >>
> >>>>> commit 694b14554d75f2a1ae111202e71860d58b434a21 upstream.
> >>
> >>>>> This control mute/unmute the ADC inp
On Thu, 2019-10-17 at 12:11 +0100, Mark Brown wrote:
> On Thu, Oct 17, 2019 at 09:49:27AM +0000, Oleksandr Suvorov wrote:
>
> > Mark, obviously this is not a NEW feature. This patch adds LOST
> > standard control.
>
> It's a new feature for this CODEC to have co
On Thu, 2019-10-17 at 17:39 +0100, Mark Brown wrote:
>
> All versions of driver sgtl5000 (since creating in 2011) has a bug in
> > sgtl5000_probe():
> > ...
> >snd_soc_write(codec, SGTL5000_CHIP_ANA_CTRL,
> >SGTL5000_HP_ZCD_EN |
> >SGTL5000_A
;
- Connect headphone to HP jack;
- Run following commands:
$ amixer set 'Headphone' 80%
$ amixer set 'Headphone Mux' LINE_IN
Also this series includes fixes of non-important bugs in sgtl5000 codec
driver.
Oleksandr Suvorov (6):
ASoC: sgtl5000: Fix definition of VAG Ramp Control
If VDDA != VDDIO and any of them is greater than 3.1V, charge pump
source can be assigned automatically.
Signed-off-by: Oleksandr Suvorov
---
sound/soc/codecs/sgtl5000.c | 14 +-
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git sound/soc/codecs/sgtl5000.c sound/soc
SGTL5000_SMALL_POP is a bit mask, not a value. Usage of
correct definition makes device probing code more clear.
Signed-off-by: Oleksandr Suvorov
---
sound/soc/codecs/sgtl5000.c | 2 +-
sound/soc/codecs/sgtl5000.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git sound/soc
Prepare to use SND_SOC_DAPM_PRE_POST_PMU definition to
reduce coming code size and make it more readable.
Signed-off-by: Oleksandr Suvorov
---
include/sound/soc-dapm.h | 2 ++
1 file changed, 2 insertions(+)
diff --git include/sound/soc-dapm.h include/sound/soc-dapm.h
index c00a0b8ade08
power OFF to avoid pop.
- delay after VAG power ON if the initiative consumer is Line-In, this
prevents pop during line-in muxing.
Also, according to the manual, to avoid any pops/clicks,
the outputs should be muted during input/output
routing changes.
Signed-off-by: Oleksandr Suvorov
---
To enable "zero cross detect" for ADC/HP, change
HP_ZCD_EN/ADC_ZCD_EN bits only instead of writing the whole
CHIP_ANA_CTRL register.
Signed-off-by: Oleksandr Suvorov
---
sound/soc/codecs/sgtl5000.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git sound/
This control mute/unmute the ADC input of SGTL5000
using its CHIP_ANA_CTRL register.
Signed-off-by: Oleksandr Suvorov
---
sound/soc/codecs/sgtl5000.c | 1 +
1 file changed, 1 insertion(+)
diff --git sound/soc/codecs/sgtl5000.c sound/soc/codecs/sgtl5000.c
index 5e49523ee0b6..bb58c997c691
ence to NXP SGTL5000 data sheet to commit message
- Fix multi-line comment format
- Add the reference to NXP SGTL5000 data sheet to commit message
Changes in v2:
- Fix patch formatting
- Fix patch formatting
- Fix patch formatting
- Fix patch formatting
- Fix patch formatting
- Fix patch formatting
SGTL5000_SMALL_POP is a bit mask, not a value. Usage of
correct definition makes device probing code more clear.
Signed-off-by: Oleksandr Suvorov
Reviewed-by: Marcel Ziswiler
Reviewed-by: Igor Opaniuk
---
Changes in v3: None
Changes in v2:
- Fix patch formatting
sound/soc/codecs/sgtl5000.c
To enable "zero cross detect" for ADC/HP, change
HP_ZCD_EN/ADC_ZCD_EN bits only instead of writing the whole
CHIP_ANA_CTRL register.
Signed-off-by: Oleksandr Suvorov
Reviewed-by: Marcel Ziswiler
Reviewed-by: Igor Opaniuk
---
Changes in v3: None
Changes in v2:
- Fix patch formatti
This control mute/unmute the ADC input of SGTL5000
using its CHIP_ANA_CTRL register.
Signed-off-by: Oleksandr Suvorov
Reviewed-by: Marcel Ziswiler
Reviewed-by: Igor Opaniuk
---
Changes in v3: None
Changes in v2:
- Fix patch formatting
sound/soc/codecs/sgtl5000.c | 1 +
1 file changed, 1
Prepare to use SND_SOC_DAPM_PRE_POST_PMU definition to
reduce coming code size and make it more readable.
Signed-off-by: Oleksandr Suvorov
Reviewed-by: Marcel Ziswiler
Reviewed-by: Igor Opaniuk
---
Changes in v3: None
Changes in v2:
- Fix patch formatting
include/sound/soc-dapm.h | 2 ++
1
If VDDA != VDDIO and any of them is greater than 3.1V, charge pump
source can be assigned automatically [1].
[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
Signed-off-by: Oleksandr Suvorov
Reviewed-by: Marcel Ziswiler
Reviewed-by: Igor Opaniuk
---
Changes in v3:
- Add the reference
/data-sheet/SGTL5000.pdf
Signed-off-by: Oleksandr Suvorov
Reviewed-by: Marcel Ziswiler
---
Changes in v3:
- Add the reference to NXP SGTL5000 data sheet to commit message
Changes in v2:
- Fix patch formatting
sound/soc/codecs/sgtl5000.c | 227 +++-
1 file changed
rds qualifiers
> [-Werror,-Wincompatible-pointer-types-discards-qualifiers]
>
> Fixes: c152f8491a8d ("ASoC: audio-graph-card: fix an use-after-free in
> graph_get_dai_id()")
> Signed-off-by: Arnd Bergmann
Reviewed-by: Oleksandr Suvorov
> ---
> sound/soc/generic/aud
;
- Connect headphone to HP jack;
- Run following commands:
$ amixer set 'Headphone' 80%
$ amixer set 'Headphone Mux' LINE_IN
Also this series includes fixes of non-important bugs in sgtl5000 codec
driver.
Fix patch formatting in patchset v2.
Oleksandr Suvorov (6):
ASoC: sgtl5000: F
SGTL5000_SMALL_POP is a bit mask, not a value. Usage of
correct definition makes device probing code more clear.
Signed-off-by: Oleksandr Suvorov
---
sound/soc/codecs/sgtl5000.c | 2 +-
sound/soc/codecs/sgtl5000.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc
power OFF to avoid pop.
- delay after VAG power ON if the initiative consumer is Line-In, this
prevents pop during line-in muxing.
Also, according to the manual, to avoid any pops/clicks,
the outputs should be muted during input/output
routing changes.
Signed-off-by: Oleksandr Suvorov
---
This control mute/unmute the ADC input of SGTL5000
using its CHIP_ANA_CTRL register.
Signed-off-by: Oleksandr Suvorov
---
sound/soc/codecs/sgtl5000.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 5e49523ee0b67..bb58c997c6914
To enable "zero cross detect" for ADC/HP, change
HP_ZCD_EN/ADC_ZCD_EN bits only instead of writing the whole
CHIP_ANA_CTRL register.
Signed-off-by: Oleksandr Suvorov
---
sound/soc/codecs/sgtl5000.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/
If VDDA != VDDIO and any of them is greater than 3.1V, charge pump
source can be assigned automatically.
Signed-off-by: Oleksandr Suvorov
---
sound/soc/codecs/sgtl5000.c | 14 +-
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc
Prepare to use SND_SOC_DAPM_PRE_POST_PMU definition to
reduce coming code size and make it more readable.
Signed-off-by: Oleksandr Suvorov
---
include/sound/soc-dapm.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index c00a0b8ade086
>
> From: Marcel Ziswiler
> Sent: Thursday, June 13, 2019 12:05
> To: feste...@gmail.com; Oleksandr Suvorov
> Cc: Igor Opaniuk; linux-kernel@vger.kernel.org; alsa-de...@alsa-project.org
> Subject: Re: [PATCH v1 1/6] ASoC: sgtl5000: Fix
On Thu, 18 Jul 2019 at 21:49, Cezary Rojewski wrote:
>
> On 2019-07-18 20:42, Cezary Rojewski wrote:
> > On 2019-07-18 11:02, Oleksandr Suvorov wrote:
> >> +enum {
> >> +HP_POWER_EVENT,
> >> +DAC_POWER_EVENT,
> >>
message
- Fix multi-line comment format
Changes in v2:
- Fix patch formatting
Oleksandr Suvorov (6):
ASoC: Define a set of DAPM pre/post-up events
ASoC: sgtl5000: Improve VAG power and mute control
ASoC: sgtl5000: Fix definition of VAG Ramp Control
ASoC: sgtl5000: add ADC mute control
data sheet [1], to avoid any pops/clicks,
the outputs should be muted during input/output
routing changes.
[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
Cc: sta...@vger.kernel.org
Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support")
Signed-off-by: Oleksandr Su
Prepare to use SND_SOC_DAPM_PRE_POST_PMU definition to
reduce coming code size and make it more readable.
Cc: sta...@vger.kernel.org
Signed-off-by: Oleksandr Suvorov
Reviewed-by: Marcel Ziswiler
Reviewed-by: Igor Opaniuk
Reviewed-by: Fabio Estevam
---
Changes in v6: None
Changes in v5
If VDDA != VDDIO and any of them is greater than 3.1V, charge pump
source can be assigned automatically [1].
[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
Signed-off-by: Oleksandr Suvorov
Reviewed-by: Marcel Ziswiler
Reviewed-by: Igor Opaniuk
Reviewed-by: Fabio Estevam
This control mute/unmute the ADC input of SGTL5000
using its CHIP_ANA_CTRL register.
Signed-off-by: Oleksandr Suvorov
Reviewed-by: Marcel Ziswiler
Reviewed-by: Igor Opaniuk
Reviewed-by: Fabio Estevam
---
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes
SGTL5000_SMALL_POP is a bit mask, not a value. Usage of
correct definition makes device probing code more clear.
Signed-off-by: Oleksandr Suvorov
Reviewed-by: Marcel Ziswiler
Reviewed-by: Igor Opaniuk
Reviewed-by: Fabio Estevam
---
Changes in v6: None
Changes in v5: None
Changes in v4: None
To enable "zero cross detect" for ADC/HP, change
HP_ZCD_EN/ADC_ZCD_EN bits only instead of writing the whole
CHIP_ANA_CTRL register.
Signed-off-by: Oleksandr Suvorov
Reviewed-by: Marcel Ziswiler
Reviewed-by: Igor Opaniuk
Reviewed-by: Fabio Estevam
---
Changes in v6: None
Changes i
On Fri, Jul 10, 2020 at 4:25 PM Philippe Schenker
wrote:
>
> This is not necessary without a pinctrl-0 statement. Remove this
> orphan.
>
> Signed-off-by: Philippe Schenker
Reviewed-by: Oleksandr Suvorov
> ---
>
> arch/arm/boot/dts/imx6qdl-colibri.dtsi | 1 -
>
On Fri, Jul 10, 2020 at 4:26 PM Philippe Schenker
wrote:
>
> Since the runtime-pm wakeup bug was fixed in
> drivers/usb/chipidea/core.c usb dual-role host/device switching is
> working. So make use of it.
>
> Signed-off-by: Philippe Schenker
Reviewed-by: Oleksandr Suvorov
&
On Fri, Jul 10, 2020 at 4:26 PM Philippe Schenker
wrote:
>
> Since the runtime-pm wakeup bug was fixed in
> drivers/usb/chipidea/core.c usb dual-role host/device switching is
> working. So make use of it.
>
> Signed-off-by: Philippe Schenker
Reviewed-by: Oleksandr Suvorov
78 matches
Mail list logo