RE: [linux-devel] [PATCH 2/3] usb: dwc3 : Add support for USB snooping
> -Original Message- > From: linux-devel-boun...@gforge.freescale.net [mailto:linux-devel- > boun...@gforge.freescale.net] On Behalf Of yinbo@nxp.com > Sent: Friday, August 11, 2017 5:00 AM > To: linux-de...@gforge.freescale.net; Yinbo Zhu ; Rob > Herring ; Mark Rutland ; > Russell King ; Felipe Balbi > Cc: open list ; Laurent Pinchart > ; Catalin Marinas > ; open list ; open list > ; Doug Ledford ; > Stefano Stabellini ; Greg Kroah-Hartman > ; Bart Van Assche > ; moderated list ker...@lists.infradead.org> > Subject: [linux-devel] [PATCH 2/3] usb: dwc3 : Add support for USB snooping > > From: Rajesh Bhagat > > Add support for USB3 snooping by asserting bits in register DWC3_GSBUSCFG0 > for data and descriptor The description doesn't fully cover the change you made below, for example allocating multiple event buffers. Please explain why you made such change. > > Signed-off-by: Nikhil Badola > Signed-off-by: Rajesh Bhagat > Signed-off-by: yinbo.zhu > --- > drivers/usb/dwc3/core.c | 71 --- > -- > drivers/usb/dwc3/core.h | 3 +++ > drivers/usb/dwc3/host.c | 8 +- > 3 files changed, 63 insertions(+), 19 deletions(-) > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index > 02a534a..b51b0d8 100644 > --- a/drivers/usb/dwc3/core.c > +++ b/drivers/usb/dwc3/core.c > @@ -90,6 +90,7 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc) > > if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) > mode = USB_DR_MODE_HOST; > + Why are you adding a new line here? > else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) > mode = USB_DR_MODE_PERIPHERAL; > } > @@ -305,14 +306,27 @@ static void dwc3_free_event_buffers(struct dwc3 > *dwc) > */ > static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length) { > - struct dwc3_event_buffer *evt; > + int num; > + int i; > + > + num = DWC3_NUM_INT(dwc->hwparams.hwparams1); > + dwc->num_event_buffers = num; > + > + dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs) * num, > + GFP_KERNEL); > + if (!dwc->ev_buffs) > + return -ENOMEM; > > - evt = dwc3_alloc_one_event_buffer(dwc, length); > - if (IS_ERR(evt)) { > - dev_err(dwc->dev, "can't allocate event buffer\n"); > - return PTR_ERR(evt); > + for (i = 0; i < num; i++) { > + struct dwc3_event_buffer*evt; > + > + evt = dwc3_alloc_one_event_buffer(dwc, length); > + if (IS_ERR(evt)) { > + dev_err(dwc->dev, "can't allocate event buffer\n"); > + return PTR_ERR(evt); > + } > + dwc->ev_buffs[i] = evt; > } > - dwc->ev_buf = evt; > > return 0; > } > @@ -325,17 +339,25 @@ static int dwc3_alloc_event_buffers(struct dwc3 > *dwc, unsigned length) > */ > static int dwc3_event_buffers_setup(struct dwc3 *dwc) { > - struct dwc3_event_buffer*evt; > - > - evt = dwc->ev_buf; > - evt->lpos = 0; > - dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(0), > - lower_32_bits(evt->dma)); > - dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(0), > - upper_32_bits(evt->dma)); > - dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), > - DWC3_GEVNTSIZ_SIZE(evt->length)); > - dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 0); > + struct dwc3_event_buffer*evt; > + int n; > + > + for (n = 0; n < dwc->num_event_buffers; n++) { > + evt = dwc->ev_buffs[n]; > + dev_dbg(dwc->dev, "Event buf %p dma %08llx length %d\n", > + evt->buf, (unsigned long long) evt->dma, > + evt->length); > + > + evt->lpos = 0; > + > + dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), > + lower_32_bits(evt->dma)); > + dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), > + upper_32_bits(evt->dma)); > + dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), > + DWC3_GEVNTSIZ_SIZE(evt->length)); > + dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0); > + } > > return 0; > } > @@ -1181,6 +1203,7 @@ static void dwc3_check_params(struct dwc3 *dwc) > static int dwc3_probe(struct platf
Re: [PATCH 2/3] usb: dwc3 : Add support for USB snooping
Hi, yinbo@nxp.com writes: > From: Rajesh Bhagat > > Add support for USB3 snooping by asserting bits > in register DWC3_GSBUSCFG0 for data and descriptor you're doing WAAY more than that. Also, you don't tell me WHY you want/need snooping to be enabled, or any of the other changes you made below. > Signed-off-by: Nikhil Badola > Signed-off-by: Rajesh Bhagat > Signed-off-by: yinbo.zhu > --- > drivers/usb/dwc3/core.c | 71 > - > drivers/usb/dwc3/core.h | 3 +++ > drivers/usb/dwc3/host.c | 8 +- > 3 files changed, 63 insertions(+), 19 deletions(-) > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c > index 02a534a..b51b0d8 100644 > --- a/drivers/usb/dwc3/core.c > +++ b/drivers/usb/dwc3/core.c > @@ -90,6 +90,7 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc) > > if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) > mode = USB_DR_MODE_HOST; > + unnecessary change > @@ -305,14 +306,27 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc) > */ > static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length) > { > - struct dwc3_event_buffer *evt; > + int num; > + int i; > + > + num = DWC3_NUM_INT(dwc->hwparams.hwparams1); > + dwc->num_event_buffers = num; > + > + dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs) * num, > + GFP_KERNEL); > + if (!dwc->ev_buffs) > + return -ENOMEM; why do you need more than one event buffer? > - evt = dwc3_alloc_one_event_buffer(dwc, length); > - if (IS_ERR(evt)) { > - dev_err(dwc->dev, "can't allocate event buffer\n"); > - return PTR_ERR(evt); > + for (i = 0; i < num; i++) { > + struct dwc3_event_buffer*evt; > + > + evt = dwc3_alloc_one_event_buffer(dwc, length); > + if (IS_ERR(evt)) { > + dev_err(dwc->dev, "can't allocate event buffer\n"); > + return PTR_ERR(evt); > + } > + dwc->ev_buffs[i] = evt; you're reverting the code to a previous stage which I changed because we had no use for more than one event buffer. You do this without any explanation of why while also putting all the changes in a completely unrelated patch. If you're new to this, you should've checked with more senior engineers about how the process works on public mailing lists. Also, we have very detailed documentation about the process, perhaps read it a little? > @@ -325,17 +339,25 @@ static int dwc3_alloc_event_buffers(struct dwc3 *dwc, > unsigned length) > */ > static int dwc3_event_buffers_setup(struct dwc3 *dwc) > { > - struct dwc3_event_buffer*evt; > - > - evt = dwc->ev_buf; > - evt->lpos = 0; > - dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(0), > - lower_32_bits(evt->dma)); > - dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(0), > - upper_32_bits(evt->dma)); > - dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), > - DWC3_GEVNTSIZ_SIZE(evt->length)); > - dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 0); > + struct dwc3_event_buffer*evt; > + int n; > + > + for (n = 0; n < dwc->num_event_buffers; n++) { > + evt = dwc->ev_buffs[n]; > + dev_dbg(dwc->dev, "Event buf %p dma %08llx length %d\n", > + evt->buf, (unsigned long long) evt->dma, > + evt->length); why these changes? Why the dev_dbg()? It took me a lot of work to get rid of dev_dbg() from this driver, I'm not accepting them back. > @@ -1181,6 +1203,7 @@ static void dwc3_check_params(struct dwc3 *dwc) > static int dwc3_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > + struct device_node *node = dev->of_node; > struct resource *res; > struct dwc3 *dwc; > > @@ -1188,7 +1211,6 @@ static int dwc3_probe(struct platform_device *pdev) > > void __iomem*regs; > > - struct device_node *node = dev->of_node; why are these two changes important? They don't seem to be. > @@ -1260,6 +1282,19 @@ static int dwc3_probe(struct platform_device *pdev) > goto err2; > } > > + /* Change burst beat and outstanding pipelined transfers requests */ > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, > + (dwc3_readl(dwc->regs, DWC3_GSBUSCFG0) & ~0xff) | 0xf); Are you SURE this will work for EVERY user of this driver? Do you know how many different companies (let alone SoCs) are using this generic driver? Why are you forcing YOUR setup upon everybody? Why should everybody use YOUR burst increment length? Also, why are you using magic constants? > + dwc3_writel(dwc->regs, DWC3_GSBUSCFG1, > + dwc3_readl(dwc->regs, DWC3_GSBUSCFG1) | 0xf00);
[PATCH 2/3] usb: dwc3 : Add support for USB snooping
From: Rajesh Bhagat Add support for USB3 snooping by asserting bits in register DWC3_GSBUSCFG0 for data and descriptor Signed-off-by: Nikhil Badola Signed-off-by: Rajesh Bhagat Signed-off-by: yinbo.zhu --- drivers/usb/dwc3/core.c | 71 - drivers/usb/dwc3/core.h | 3 +++ drivers/usb/dwc3/host.c | 8 +- 3 files changed, 63 insertions(+), 19 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 02a534a..b51b0d8 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -90,6 +90,7 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc) if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) mode = USB_DR_MODE_HOST; + else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) mode = USB_DR_MODE_PERIPHERAL; } @@ -305,14 +306,27 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc) */ static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length) { - struct dwc3_event_buffer *evt; + int num; + int i; + + num = DWC3_NUM_INT(dwc->hwparams.hwparams1); + dwc->num_event_buffers = num; + + dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs) * num, + GFP_KERNEL); + if (!dwc->ev_buffs) + return -ENOMEM; - evt = dwc3_alloc_one_event_buffer(dwc, length); - if (IS_ERR(evt)) { - dev_err(dwc->dev, "can't allocate event buffer\n"); - return PTR_ERR(evt); + for (i = 0; i < num; i++) { + struct dwc3_event_buffer*evt; + + evt = dwc3_alloc_one_event_buffer(dwc, length); + if (IS_ERR(evt)) { + dev_err(dwc->dev, "can't allocate event buffer\n"); + return PTR_ERR(evt); + } + dwc->ev_buffs[i] = evt; } - dwc->ev_buf = evt; return 0; } @@ -325,17 +339,25 @@ static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length) */ static int dwc3_event_buffers_setup(struct dwc3 *dwc) { - struct dwc3_event_buffer*evt; - - evt = dwc->ev_buf; - evt->lpos = 0; - dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(0), - lower_32_bits(evt->dma)); - dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(0), - upper_32_bits(evt->dma)); - dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), - DWC3_GEVNTSIZ_SIZE(evt->length)); - dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 0); + struct dwc3_event_buffer*evt; + int n; + + for (n = 0; n < dwc->num_event_buffers; n++) { + evt = dwc->ev_buffs[n]; + dev_dbg(dwc->dev, "Event buf %p dma %08llx length %d\n", + evt->buf, (unsigned long long) evt->dma, + evt->length); + + evt->lpos = 0; + + dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), + lower_32_bits(evt->dma)); + dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), + upper_32_bits(evt->dma)); + dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), + DWC3_GEVNTSIZ_SIZE(evt->length)); + dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0); + } return 0; } @@ -1181,6 +1203,7 @@ static void dwc3_check_params(struct dwc3 *dwc) static int dwc3_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; struct resource *res; struct dwc3 *dwc; @@ -1188,7 +1211,6 @@ static int dwc3_probe(struct platform_device *pdev) void __iomem*regs; - struct device_node *node = dev->of_node; dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL); if (!dwc) return -ENOMEM; @@ -1260,6 +1282,19 @@ static int dwc3_probe(struct platform_device *pdev) goto err2; } + /* Change burst beat and outstanding pipelined transfers requests */ + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, + (dwc3_readl(dwc->regs, DWC3_GSBUSCFG0) & ~0xff) | 0xf); + dwc3_writel(dwc->regs, DWC3_GSBUSCFG1, + dwc3_readl(dwc->regs, DWC3_GSBUSCFG1) | 0xf00); + + /* Enable Snooping */ + if (node && of_dma_is_coherent(node)) { + dwc3_writel(dwc->regs, DWC3_GSBUSCFG0, + dwc3_readl(dwc->regs, DWC3_GSBUSCFG0) | 0x); + dev_dbg(dev, "enabled snooping for usb\n"); + } + ret = dwc3_get_dr_mode(dwc); if (ret) goto err3; diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index b83388f..e075665 100644 --- a/drivers/usb/dwc3/core.h ++