Re: [PATCH V8 1/2] PCI: handle CRS returned by device after FLR

2017-08-08 Thread Sinan Kaya
On 8/8/2017 5:19 PM, Bjorn Helgaas wrote:
> On Sun, Aug 06, 2017 at 10:09:51PM -0400, Sinan Kaya wrote:
> 
> We should include some high-level description of the problem we're
> trying to solve here.
> 
> I *think* the problem is that we do something like this:
> 
>   - perform an FLR
>   - sleep up to 1000ms total
>   - read ~0 from PCI_COMMAND
>   - warn that the device didn't return from FLR
>   - touch the device before it's ready
> 
> When in fact the device is still initializing after the FLR and would
> return CRS status if we looked for it.  So we should be looking for
> CRS and waiting longer before we start using the device.

OK. I'll reuse your sentences towards an introductory paragraph. Yes, the
issue describing is what is happening.

> 
>> An endpoint is allowed to issue Configuration Request Retry Status (CRS)
>> following a Function Level Reset (FLR) request to indicate that it is
>> not ready to accept new requests. CRS is defined in PCIe r3.1, sec 2.3.1.
>> Request Handling Rules and CRS usage in FLR context is mentioned in
>> PCIe r3.1, sec 6.6.2. Function-Level Reset.
>>
>> A CRS indication will only be given if the address to be read is vendor ID
>> register. pci_bus_read_dev_vendor_id() knows how to deal with CRS returned
>> 0x0001 value and will continue polling until a value other than
>> 0x0001 is returned within a given timeout.
>>
>> Try to discover device presence via CRS if supported. Otherwise, fall
>> through to old behavior.
>>
>> Signed-off-by: Sinan Kaya 
>> ---
>>  drivers/pci/pci.c | 18 ++
>>  1 file changed, 18 insertions(+)
>>
>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>> index af0cc34..cc9f1c0 100644
>> --- a/drivers/pci/pci.c
>> +++ b/drivers/pci/pci.c
>> @@ -3819,8 +3819,26 @@ int pci_wait_for_pending_transaction(struct pci_dev 
>> *dev)
>>   */
>>  static void pci_flr_wait(struct pci_dev *dev)
>>  {
>> +u16 root_cap = 0;
>>  int i = 0;
>>  u32 id;
>> +bool ret;
>> +
>> +pcie_capability_read_word(dev, PCI_EXP_RTCAP, _cap);
>> +if (root_cap & PCI_EXP_RTCAP_CRSVIS) {
> 
> Why do we want to look at PCI_EXP_RTCAP_CRSVIS here?  We don't look at
> it in other paths that call pci_bus_read_dev_vendor_id().

OK. I was trying to separate old cold path from new code path for CRS capable
HW. There is no harm in removing this check like you mentioned.  

> 
>> +/* don't touch the HW before waiting 100ms */
> 
> I believe this, but would like to include a reference to the section
> of the spec that contains this number.  Otherwise it's just a magic
> number and makes future maintenance hard.

OK.

> 
>> +msleep(100);
>> +
>> +/*
>> + * Physical functions return from here if found,
>> + * virtual functions fall through as they return ~0 on vendor
>> + * id read once CRS is completed.
>> + */
>> +ret = pci_bus_read_dev_vendor_id(dev->bus, dev->devfn, ,
>> + 6);
>> +if (ret)
>> +return;
>> +}
>>  
>>  do {
>>  msleep(100);
>> -- 
>> 1.9.1
>>
>>
>> ___
>> linux-arm-kernel mailing list
>> linux-arm-ker...@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 


-- 
Sinan Kaya
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm 
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux 
Foundation Collaborative Project.


Re: [PATCH V8 1/2] PCI: handle CRS returned by device after FLR

2017-08-08 Thread Sinan Kaya
On 8/8/2017 5:19 PM, Bjorn Helgaas wrote:
> On Sun, Aug 06, 2017 at 10:09:51PM -0400, Sinan Kaya wrote:
> 
> We should include some high-level description of the problem we're
> trying to solve here.
> 
> I *think* the problem is that we do something like this:
> 
>   - perform an FLR
>   - sleep up to 1000ms total
>   - read ~0 from PCI_COMMAND
>   - warn that the device didn't return from FLR
>   - touch the device before it's ready
> 
> When in fact the device is still initializing after the FLR and would
> return CRS status if we looked for it.  So we should be looking for
> CRS and waiting longer before we start using the device.

OK. I'll reuse your sentences towards an introductory paragraph. Yes, the
issue describing is what is happening.

> 
>> An endpoint is allowed to issue Configuration Request Retry Status (CRS)
>> following a Function Level Reset (FLR) request to indicate that it is
>> not ready to accept new requests. CRS is defined in PCIe r3.1, sec 2.3.1.
>> Request Handling Rules and CRS usage in FLR context is mentioned in
>> PCIe r3.1, sec 6.6.2. Function-Level Reset.
>>
>> A CRS indication will only be given if the address to be read is vendor ID
>> register. pci_bus_read_dev_vendor_id() knows how to deal with CRS returned
>> 0x0001 value and will continue polling until a value other than
>> 0x0001 is returned within a given timeout.
>>
>> Try to discover device presence via CRS if supported. Otherwise, fall
>> through to old behavior.
>>
>> Signed-off-by: Sinan Kaya 
>> ---
>>  drivers/pci/pci.c | 18 ++
>>  1 file changed, 18 insertions(+)
>>
>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>> index af0cc34..cc9f1c0 100644
>> --- a/drivers/pci/pci.c
>> +++ b/drivers/pci/pci.c
>> @@ -3819,8 +3819,26 @@ int pci_wait_for_pending_transaction(struct pci_dev 
>> *dev)
>>   */
>>  static void pci_flr_wait(struct pci_dev *dev)
>>  {
>> +u16 root_cap = 0;
>>  int i = 0;
>>  u32 id;
>> +bool ret;
>> +
>> +pcie_capability_read_word(dev, PCI_EXP_RTCAP, _cap);
>> +if (root_cap & PCI_EXP_RTCAP_CRSVIS) {
> 
> Why do we want to look at PCI_EXP_RTCAP_CRSVIS here?  We don't look at
> it in other paths that call pci_bus_read_dev_vendor_id().

OK. I was trying to separate old cold path from new code path for CRS capable
HW. There is no harm in removing this check like you mentioned.  

> 
>> +/* don't touch the HW before waiting 100ms */
> 
> I believe this, but would like to include a reference to the section
> of the spec that contains this number.  Otherwise it's just a magic
> number and makes future maintenance hard.

OK.

> 
>> +msleep(100);
>> +
>> +/*
>> + * Physical functions return from here if found,
>> + * virtual functions fall through as they return ~0 on vendor
>> + * id read once CRS is completed.
>> + */
>> +ret = pci_bus_read_dev_vendor_id(dev->bus, dev->devfn, ,
>> + 6);
>> +if (ret)
>> +return;
>> +}
>>  
>>  do {
>>  msleep(100);
>> -- 
>> 1.9.1
>>
>>
>> ___
>> linux-arm-kernel mailing list
>> linux-arm-ker...@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 


-- 
Sinan Kaya
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm 
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux 
Foundation Collaborative Project.


Re: [PATCH V8 1/2] PCI: handle CRS returned by device after FLR

2017-08-08 Thread Bjorn Helgaas
On Sun, Aug 06, 2017 at 10:09:51PM -0400, Sinan Kaya wrote:

We should include some high-level description of the problem we're
trying to solve here.

I *think* the problem is that we do something like this:

  - perform an FLR
  - sleep up to 1000ms total
  - read ~0 from PCI_COMMAND
  - warn that the device didn't return from FLR
  - touch the device before it's ready

When in fact the device is still initializing after the FLR and would
return CRS status if we looked for it.  So we should be looking for
CRS and waiting longer before we start using the device.

> An endpoint is allowed to issue Configuration Request Retry Status (CRS)
> following a Function Level Reset (FLR) request to indicate that it is
> not ready to accept new requests. CRS is defined in PCIe r3.1, sec 2.3.1.
> Request Handling Rules and CRS usage in FLR context is mentioned in
> PCIe r3.1, sec 6.6.2. Function-Level Reset.
> 
> A CRS indication will only be given if the address to be read is vendor ID
> register. pci_bus_read_dev_vendor_id() knows how to deal with CRS returned
> 0x0001 value and will continue polling until a value other than
> 0x0001 is returned within a given timeout.
> 
> Try to discover device presence via CRS if supported. Otherwise, fall
> through to old behavior.
> 
> Signed-off-by: Sinan Kaya 
> ---
>  drivers/pci/pci.c | 18 ++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index af0cc34..cc9f1c0 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -3819,8 +3819,26 @@ int pci_wait_for_pending_transaction(struct pci_dev 
> *dev)
>   */
>  static void pci_flr_wait(struct pci_dev *dev)
>  {
> + u16 root_cap = 0;
>   int i = 0;
>   u32 id;
> + bool ret;
> +
> + pcie_capability_read_word(dev, PCI_EXP_RTCAP, _cap);
> + if (root_cap & PCI_EXP_RTCAP_CRSVIS) {

Why do we want to look at PCI_EXP_RTCAP_CRSVIS here?  We don't look at
it in other paths that call pci_bus_read_dev_vendor_id().

> + /* don't touch the HW before waiting 100ms */

I believe this, but would like to include a reference to the section
of the spec that contains this number.  Otherwise it's just a magic
number and makes future maintenance hard.

> + msleep(100);
> +
> + /*
> +  * Physical functions return from here if found,
> +  * virtual functions fall through as they return ~0 on vendor
> +  * id read once CRS is completed.
> +  */
> + ret = pci_bus_read_dev_vendor_id(dev->bus, dev->devfn, ,
> +  6);
> + if (ret)
> + return;
> + }
>  
>   do {
>   msleep(100);
> -- 
> 1.9.1
> 
> 
> ___
> linux-arm-kernel mailing list
> linux-arm-ker...@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel


Re: [PATCH V8 1/2] PCI: handle CRS returned by device after FLR

2017-08-08 Thread Bjorn Helgaas
On Sun, Aug 06, 2017 at 10:09:51PM -0400, Sinan Kaya wrote:

We should include some high-level description of the problem we're
trying to solve here.

I *think* the problem is that we do something like this:

  - perform an FLR
  - sleep up to 1000ms total
  - read ~0 from PCI_COMMAND
  - warn that the device didn't return from FLR
  - touch the device before it's ready

When in fact the device is still initializing after the FLR and would
return CRS status if we looked for it.  So we should be looking for
CRS and waiting longer before we start using the device.

> An endpoint is allowed to issue Configuration Request Retry Status (CRS)
> following a Function Level Reset (FLR) request to indicate that it is
> not ready to accept new requests. CRS is defined in PCIe r3.1, sec 2.3.1.
> Request Handling Rules and CRS usage in FLR context is mentioned in
> PCIe r3.1, sec 6.6.2. Function-Level Reset.
> 
> A CRS indication will only be given if the address to be read is vendor ID
> register. pci_bus_read_dev_vendor_id() knows how to deal with CRS returned
> 0x0001 value and will continue polling until a value other than
> 0x0001 is returned within a given timeout.
> 
> Try to discover device presence via CRS if supported. Otherwise, fall
> through to old behavior.
> 
> Signed-off-by: Sinan Kaya 
> ---
>  drivers/pci/pci.c | 18 ++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index af0cc34..cc9f1c0 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -3819,8 +3819,26 @@ int pci_wait_for_pending_transaction(struct pci_dev 
> *dev)
>   */
>  static void pci_flr_wait(struct pci_dev *dev)
>  {
> + u16 root_cap = 0;
>   int i = 0;
>   u32 id;
> + bool ret;
> +
> + pcie_capability_read_word(dev, PCI_EXP_RTCAP, _cap);
> + if (root_cap & PCI_EXP_RTCAP_CRSVIS) {

Why do we want to look at PCI_EXP_RTCAP_CRSVIS here?  We don't look at
it in other paths that call pci_bus_read_dev_vendor_id().

> + /* don't touch the HW before waiting 100ms */

I believe this, but would like to include a reference to the section
of the spec that contains this number.  Otherwise it's just a magic
number and makes future maintenance hard.

> + msleep(100);
> +
> + /*
> +  * Physical functions return from here if found,
> +  * virtual functions fall through as they return ~0 on vendor
> +  * id read once CRS is completed.
> +  */
> + ret = pci_bus_read_dev_vendor_id(dev->bus, dev->devfn, ,
> +  6);
> + if (ret)
> + return;
> + }
>  
>   do {
>   msleep(100);
> -- 
> 1.9.1
> 
> 
> ___
> linux-arm-kernel mailing list
> linux-arm-ker...@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel


Re: [PATCH V8 1/2] PCI: handle CRS returned by device after FLR

2017-08-06 Thread Sinan Kaya
On 8/6/2017 10:09 PM, Sinan Kaya wrote:
> + pcie_capability_read_word(dev, PCI_EXP_RTCAP, _cap);
> + if (root_cap & PCI_EXP_RTCAP_CRSVIS) {
> + /* don't touch the HW before waiting 100ms */
> + msleep(100);

This is obviously broken. I should have checked the capability
on the root port. I was trying to get it out before Monday.

However, I still want to hear about the preference of this
methodology.

-- 
Sinan Kaya
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm 
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux 
Foundation Collaborative Project.


Re: [PATCH V8 1/2] PCI: handle CRS returned by device after FLR

2017-08-06 Thread Sinan Kaya
On 8/6/2017 10:09 PM, Sinan Kaya wrote:
> + pcie_capability_read_word(dev, PCI_EXP_RTCAP, _cap);
> + if (root_cap & PCI_EXP_RTCAP_CRSVIS) {
> + /* don't touch the HW before waiting 100ms */
> + msleep(100);

This is obviously broken. I should have checked the capability
on the root port. I was trying to get it out before Monday.

However, I still want to hear about the preference of this
methodology.

-- 
Sinan Kaya
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm 
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux 
Foundation Collaborative Project.


[PATCH V8 1/2] PCI: handle CRS returned by device after FLR

2017-08-06 Thread Sinan Kaya
An endpoint is allowed to issue Configuration Request Retry Status (CRS)
following a Function Level Reset (FLR) request to indicate that it is
not ready to accept new requests. CRS is defined in PCIe r3.1, sec 2.3.1.
Request Handling Rules and CRS usage in FLR context is mentioned in
PCIe r3.1, sec 6.6.2. Function-Level Reset.

A CRS indication will only be given if the address to be read is vendor ID
register. pci_bus_read_dev_vendor_id() knows how to deal with CRS returned
0x0001 value and will continue polling until a value other than
0x0001 is returned within a given timeout.

Try to discover device presence via CRS if supported. Otherwise, fall
through to old behavior.

Signed-off-by: Sinan Kaya 
---
 drivers/pci/pci.c | 18 ++
 1 file changed, 18 insertions(+)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index af0cc34..cc9f1c0 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3819,8 +3819,26 @@ int pci_wait_for_pending_transaction(struct pci_dev *dev)
  */
 static void pci_flr_wait(struct pci_dev *dev)
 {
+   u16 root_cap = 0;
int i = 0;
u32 id;
+   bool ret;
+
+   pcie_capability_read_word(dev, PCI_EXP_RTCAP, _cap);
+   if (root_cap & PCI_EXP_RTCAP_CRSVIS) {
+   /* don't touch the HW before waiting 100ms */
+   msleep(100);
+
+   /*
+* Physical functions return from here if found,
+* virtual functions fall through as they return ~0 on vendor
+* id read once CRS is completed.
+*/
+   ret = pci_bus_read_dev_vendor_id(dev->bus, dev->devfn, ,
+6);
+   if (ret)
+   return;
+   }
 
do {
msleep(100);
-- 
1.9.1



[PATCH V8 1/2] PCI: handle CRS returned by device after FLR

2017-08-06 Thread Sinan Kaya
An endpoint is allowed to issue Configuration Request Retry Status (CRS)
following a Function Level Reset (FLR) request to indicate that it is
not ready to accept new requests. CRS is defined in PCIe r3.1, sec 2.3.1.
Request Handling Rules and CRS usage in FLR context is mentioned in
PCIe r3.1, sec 6.6.2. Function-Level Reset.

A CRS indication will only be given if the address to be read is vendor ID
register. pci_bus_read_dev_vendor_id() knows how to deal with CRS returned
0x0001 value and will continue polling until a value other than
0x0001 is returned within a given timeout.

Try to discover device presence via CRS if supported. Otherwise, fall
through to old behavior.

Signed-off-by: Sinan Kaya 
---
 drivers/pci/pci.c | 18 ++
 1 file changed, 18 insertions(+)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index af0cc34..cc9f1c0 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3819,8 +3819,26 @@ int pci_wait_for_pending_transaction(struct pci_dev *dev)
  */
 static void pci_flr_wait(struct pci_dev *dev)
 {
+   u16 root_cap = 0;
int i = 0;
u32 id;
+   bool ret;
+
+   pcie_capability_read_word(dev, PCI_EXP_RTCAP, _cap);
+   if (root_cap & PCI_EXP_RTCAP_CRSVIS) {
+   /* don't touch the HW before waiting 100ms */
+   msleep(100);
+
+   /*
+* Physical functions return from here if found,
+* virtual functions fall through as they return ~0 on vendor
+* id read once CRS is completed.
+*/
+   ret = pci_bus_read_dev_vendor_id(dev->bus, dev->devfn, ,
+6);
+   if (ret)
+   return;
+   }
 
do {
msleep(100);
-- 
1.9.1