Re: [PATCH v4 14/20] mtd: nand: qcom: add command elements in BAM transaction
On 08/11/2017 05:09 PM, Abhishek Sahu wrote:
All the QPIC register read/write through BAM DMA requires
command descriptor which contains the array of command elements.
Reviewed-by: Archit Taneja
Thanks,
Archit
Signed-off-by: Abhishek Sahu
---
drivers/mtd/nand/qcom_nandc.c | 19 ++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c
index c0c140b..d17c466 100644
--- a/drivers/mtd/nand/qcom_nandc.c
+++ b/drivers/mtd/nand/qcom_nandc.c
@@ -22,6 +22,7 @@
#include
#include
#include
+#include
/* NANDc reg offsets */
#define NAND_FLASH_CMD 0x00
@@ -196,6 +197,7 @@
/* Returns the actual register address for NAND_FLASH_DEV_* */
#define nandc_dev_addr(nandc, reg) ((nandc)->props->flash_dev_offset + (reg))
+#define QPIC_PER_CW_CMD_ELEMENTS 32
#define QPIC_PER_CW_CMD_SGL 32
#define QPIC_PER_CW_DATA_SGL 8
@@ -215,8 +217,13 @@
/*
* This data type corresponds to the BAM transaction which will be used for
all
* NAND transfers.
+ * @bam_ce - the array of BAM command elements
* @cmd_sgl - sgl for NAND BAM command pipe
* @data_sgl - sgl for NAND BAM consumer/producer pipe
+ * @bam_ce_pos - the index in bam_ce which is available for next sgl
+ * @bam_ce_start - the index in bam_ce which marks the start position ce
+ *for current sgl. It will be used for size calculation
+ *for current sgl
* @cmd_sgl_pos - current index in command sgl.
* @cmd_sgl_start - start index in command sgl.
* @tx_sgl_pos - current index in data sgl for tx.
@@ -225,8 +232,11 @@
* @rx_sgl_start - start index in data sgl for rx.
*/
struct bam_transaction {
+ struct bam_cmd_element *bam_ce;
struct scatterlist *cmd_sgl;
struct scatterlist *data_sgl;
+ u32 bam_ce_pos;
+ u32 bam_ce_start;
u32 cmd_sgl_pos;
u32 cmd_sgl_start;
u32 tx_sgl_pos;
@@ -456,7 +466,8 @@ static void free_bam_transaction(struct
qcom_nand_controller *nandc)
bam_txn_size =
sizeof(*bam_txn) + num_cw *
- ((sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL) +
+ ((sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS) +
+ (sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL) +
(sizeof(*bam_txn->data_sgl) * QPIC_PER_CW_DATA_SGL));
bam_txn_buf = devm_kzalloc(nandc->dev, bam_txn_size, GFP_KERNEL);
@@ -466,6 +477,10 @@ static void free_bam_transaction(struct
qcom_nand_controller *nandc)
bam_txn = bam_txn_buf;
bam_txn_buf += sizeof(*bam_txn);
+ bam_txn->bam_ce = bam_txn_buf;
+ bam_txn_buf +=
+ sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS * num_cw;
+
bam_txn->cmd_sgl = bam_txn_buf;
bam_txn_buf +=
sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL * num_cw;
@@ -483,6 +498,8 @@ static void clear_bam_transaction(struct
qcom_nand_controller *nandc)
if (!nandc->props->is_bam)
return;
+ bam_txn->bam_ce_pos = 0;
+ bam_txn->bam_ce_start = 0;
bam_txn->cmd_sgl_pos = 0;
bam_txn->cmd_sgl_start = 0;
bam_txn->tx_sgl_pos = 0;
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
[PATCH v4 14/20] mtd: nand: qcom: add command elements in BAM transaction
All the QPIC register read/write through BAM DMA requires
command descriptor which contains the array of command elements.
Signed-off-by: Abhishek Sahu
---
drivers/mtd/nand/qcom_nandc.c | 19 ++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c
index c0c140b..d17c466 100644
--- a/drivers/mtd/nand/qcom_nandc.c
+++ b/drivers/mtd/nand/qcom_nandc.c
@@ -22,6 +22,7 @@
#include
#include
#include
+#include
/* NANDc reg offsets */
#defineNAND_FLASH_CMD 0x00
@@ -196,6 +197,7 @@
/* Returns the actual register address for NAND_FLASH_DEV_* */
#define nandc_dev_addr(nandc, reg) ((nandc)->props->flash_dev_offset + (reg))
+#define QPIC_PER_CW_CMD_ELEMENTS 32
#define QPIC_PER_CW_CMD_SGL32
#define QPIC_PER_CW_DATA_SGL 8
@@ -215,8 +217,13 @@
/*
* This data type corresponds to the BAM transaction which will be used for all
* NAND transfers.
+ * @bam_ce - the array of BAM command elements
* @cmd_sgl - sgl for NAND BAM command pipe
* @data_sgl - sgl for NAND BAM consumer/producer pipe
+ * @bam_ce_pos - the index in bam_ce which is available for next sgl
+ * @bam_ce_start - the index in bam_ce which marks the start position ce
+ *for current sgl. It will be used for size calculation
+ *for current sgl
* @cmd_sgl_pos - current index in command sgl.
* @cmd_sgl_start - start index in command sgl.
* @tx_sgl_pos - current index in data sgl for tx.
@@ -225,8 +232,11 @@
* @rx_sgl_start - start index in data sgl for rx.
*/
struct bam_transaction {
+ struct bam_cmd_element *bam_ce;
struct scatterlist *cmd_sgl;
struct scatterlist *data_sgl;
+ u32 bam_ce_pos;
+ u32 bam_ce_start;
u32 cmd_sgl_pos;
u32 cmd_sgl_start;
u32 tx_sgl_pos;
@@ -456,7 +466,8 @@ static void free_bam_transaction(struct
qcom_nand_controller *nandc)
bam_txn_size =
sizeof(*bam_txn) + num_cw *
- ((sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL) +
+ ((sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS) +
+ (sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL) +
(sizeof(*bam_txn->data_sgl) * QPIC_PER_CW_DATA_SGL));
bam_txn_buf = devm_kzalloc(nandc->dev, bam_txn_size, GFP_KERNEL);
@@ -466,6 +477,10 @@ static void free_bam_transaction(struct
qcom_nand_controller *nandc)
bam_txn = bam_txn_buf;
bam_txn_buf += sizeof(*bam_txn);
+ bam_txn->bam_ce = bam_txn_buf;
+ bam_txn_buf +=
+ sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS * num_cw;
+
bam_txn->cmd_sgl = bam_txn_buf;
bam_txn_buf +=
sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL * num_cw;
@@ -483,6 +498,8 @@ static void clear_bam_transaction(struct
qcom_nand_controller *nandc)
if (!nandc->props->is_bam)
return;
+ bam_txn->bam_ce_pos = 0;
+ bam_txn->bam_ce_start = 0;
bam_txn->cmd_sgl_pos = 0;
bam_txn->cmd_sgl_start = 0;
bam_txn->tx_sgl_pos = 0;
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of
Code Aurora Forum, hosted by The Linux Foundation
