[RESEND PATCH 3/3] ARM: dts: artpec: add pcie support

[Niklas Cassel]

From: Niklas Cassel <niklas.cas...@axis.com>

Add PCIe support to the ARTPEC-6 SoC. This uses the existing
pcie-artpec6 driver.
So, all that is needed is device tree entries in the DTS.

Signed-off-by: Niklas Cassel <niklas.cas...@axis.com>
---
 arch/arm/boot/dts/artpec6-devboard.dts |  4 ++++
 arch/arm/boot/dts/artpec6.dtsi         | 29 ++++++++++++++++++++++++++++-
 2 files changed, 32 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/artpec6-devboard.dts 
b/arch/arm/boot/dts/artpec6-devboard.dts
index f823ed3..9dfe845 100644
--- a/arch/arm/boot/dts/artpec6-devboard.dts
+++ b/arch/arm/boot/dts/artpec6-devboard.dts
@@ -46,6 +46,10 @@
        status = "okay";
 };
 
+&pcie {
+       status = "okay";
+};
+
 &ethernet {
        status = "okay";
 
diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
index 3fac4c4..effaa4a 100644
--- a/arch/arm/boot/dts/artpec6.dtsi
+++ b/arch/arm/boot/dts/artpec6.dtsi
@@ -66,7 +66,7 @@
                };
        };
 
-       syscon {
+       syscon: syscon@f8000000 {
                compatible = "axis,artpec6-syscon", "syscon";
                reg = <0xf8000000 0x48>;
        };
@@ -145,6 +145,33 @@
                interrupt-parent = <&intc>;
        };
 
+       pcie: pcie@f8050000 {
+               compatible = "axis,artpec6-pcie", "snps,dw-pcie";
+               reg = <0xf8050000 0x2000
+                      0xf8040000 0x1000
+                      0xc0000000 0x2000>;
+               reg-names = "dbi", "phy", "config";
+               #address-cells = <3>;
+               #size-cells = <2>;
+               device_type = "pci";
+                         /* downstream I/O */
+               ranges = <0x81000000 0 0 0xc0002000 0 0x00010000
+                         /* non-prefetchable memory */
+                         0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>;
+               num-lanes = <2>;
+               bus-range = <0x00 0xff>;
+               interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+               interrupt-names = "msi";
+               #interrupt-cells = <1>;
+               interrupt-map-mask = <0 0 0 0x7>;
+               interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                               <0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                               <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                               <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+               axis,syscon-pcie = <&syscon>;
+               status = "disabled";
+       };
+
        amba@0 {
                compatible = "simple-bus";
                #address-cells = <0x1>;
-- 
2.1.4